when build the app in xcode 11.5 generate this issue.
LOG: I hope can help me!! Regards!!
warning: Could not read serialized diagnostics file: Cannot Load File: Failed to open diagnostics file (in target 'B7_MOCHA' from project 'B7_MOCHA')
warning: Could not read serialized diagnostics file: Cannot Load File: Failed to open diagnostics file (in target 'B7_MOCHA' from project 'B7_MOCHA')
warning: Could not read serialized diagnostics file: Cannot Load File: Failed to open
diagnostics file (in target 'B7_MOCHA' from project 'B7_MOCHA')
:0: error: unable to execute command: Killed: 9
:0: error: compile command failed due to signal 9 (use -v to see invocation)
Command CompileSwiftSources failed with a nonzero exit code
this a picture from console log:
the other console show this issue
/Users/dverdugo/Library/Developer/Xcode/DerivedData/B7_MOCHA-asiprqvqhlstshfnhycalolsjhxs/Build/Intermediates.noindex/B7_MOCHA.build/Debug-iphoneos/B7_MOCHA.build/Objects-normal-asan/arm64/TAG_CHAT.dia:1:1: Could not read serialized diagnostics file: Cannot Load File: Failed to open diagnostics file
I hope can help me!! Regards!!
Sometimes the best thing you need to do is
-Close xcode.
-Restar the Mac
-check if the pods you are using installed well.
and for the second error, maybe you deleted some file in the folder of your project so xcode is looking for it and can't find it.
Related
I have updated Xcode to Version 13.4.1 (13F100),
Then tried to run a flutter project
Launching lib/main.dart on iPhone SE (3rd generation) in debug mode...
Xcode build done. 2.9s
Failed to build iOS app
Error output from Xcode build:
↳
2022-06-11 12:51:51.546 xcodebuild[45221:416597] Requested but did not find extension point with identifier Xcode.IDEKit.ExtensionSentinelHostApplications for extension Xcode.DebuggerFoundation.AppExtensionHosts.watchOS of plug-in com.apple.dt.IDEWatchSupportCore
2022-06-11 12:51:51.547 xcodebuild[45221:416597] Requested but did not find extension point with identifier Xcode.IDEKit.ExtensionPointIdentifierToBundleIdentifier for extension Xcode.DebuggerFoundation.AppExtensionToBundleIdentifierMap.watchOS of plug-in com.apple.dt.IDEWatchSupportCore
2022-06-11 12:51:51.625 xcodebuild[45221:416597] [MT] DVTPlugInExtensionFaulting: Failed to fire fault for extension (null): (null)
2022-06-11 12:51:51.628 xcodebuild[45221:416597] [MT] DVTPlugInExtensionFaulting: Failed to fire fault for extension (null): (null)
** BUILD FAILED **
Xcode's output:
↳
Writing result bundle at path:
/var/folders/l6/zr2yb4p1787b1cbhjdn2ltvr0000gn/T/flutter_tools.tQVcwl/flutter_ios_build_temp_dirmZJ1FK/temporary_xcresult_bundle
note: Using new build system
note: Planning
note: Build preparation complete
note: Building targets in dependency order
error: failed to read asset tags: The command `(cd /Volumes/Code/Git/svg/ios && /usr/bin/actool --print-asset-tag-combinations --output-format xml1 /Volumes/Code/Git/svg/ios/Runner/Assets.xcassets)` exited with status 72. The command's standard error was:
actool: error: Failed to locate 'actool'.
xcode-select: Failed to locate 'actool', requesting installation of command line developer tools.
(in target 'Runner' from project 'Runner')
Result bundle written to path:
/var/folders/l6/zr2yb4p1787b1cbhjdn2ltvr0000gn/T/flutter_tools.tQVcwl/flutter_ios_build_temp_dirmZJ1FK/temporary_xcresult_bundle
Error (Xcode): failed to read asset tags: The command `(cd /Volumes/Code/Git/svg/ios && /usr/bin/actool --print-asset-tag-combinations --output-format xml1 /Volumes/Code/Git/svg/ios/Runner/Assets.xcassets)` exited with status 72. The command's standard error was:
actool: error: Failed to locate 'actool'.
xcode-select: Failed to locate 'actool', requesting installation of command line developer tools.
Could not build the application for the simulator.
Error launching application on iPhone SE (3rd generation).
Exited
with an alert
The "actool" command requires the command line developer tools. Would
you like to install the tools now?
And if I run it from Xcode it gives me this error:
Showing All Messages
failed to read asset tags: The command `(cd /Volumes/Code/Git/svg/ios && /usr/bin/actool --print-asset-tag-combinations --output-format xml1 /Volumes/Code/Git/svg/ios/Runner/Assets.xcassets)` exited with status 72. The command's standard error was:
actool: error: Failed to locate 'actool'.
xcode-select: Failed to locate 'actool', requesting installation of command line developer tools.
This repetitively occurs even if I press the "Install" button.
Same issue here, but with git instead of actool. Another coworker just also got this but with clang... what is going on over at apple?
What just fixed mine was actually opening up xcode and having it run its installer there instead of allowing the automatic pop-up to continue to "install" and then ask again in a few minutes.
I'm trying to compile an Xcode project. I'm getting 2 runtime errors:
No such module 'Amplify'
&
/Users/????????/Library/Developer/Xcode/DerivedData/screener_app-gkvpndyzdgqrsreqyokgisatdzav/Build/Intermediates.noindex/screener_app.build/Debug-iphonesimulator/screener_app.build/Objects-normal/x86_64/AuthButtonView.dia:1:1: warning: Could not read serialized diagnostics file: error("Invalid diagnostics signature") (in target 'screener_app' from project 'screener_app') Command CompileSwift failed with a nonzero exit code
The screenshot is seen below.
I have tried a handful of things:
cleaned build folder
install/update pods
removed derived data
I'm not sure what to do from here. Any advice is appreciated.
Edit: I am seeing that the workspace is compiling but the project folder is not.
Building a React Native Expo app (prebuild on iOS, not using Expo Go) and running into this esoteric error that I can't seem to find elsewhere on the internet.
I'll post it here for the next unlucky React Native dev, and perhaps I'll find a solution and post that too.
expo run:ios output:
⚠️ (../../Library/Developer/Xcode/DerivedData/MyProject-epxolwjjgmimbdefugnlecrdysuv/Build/Intermediates.noindex/PrecompiledHeaders/MyProject-Bridging-Header-2vyenlvwppgam.dia:1:1)
Command PrecompileSwiftBridgingHeader failed with a nonzero exit code
^ Could not read serialized diagnostics file: error(in target 'MyProject' from project 'MyProject')
❌ error: generate-pch command failed with exit code 1 (use -v to see invocation)
› 1 error(s), and 1 warning(s)
Failed to build iOS project. "xcodebuild" exited with error code 65.
Xcode build output:
<unknown>:0: error: error opening input file '/Users/jh/Code/MyProject/ios/MyProject/MyProject-Bridging-Header.h' (No such file or directory)
<unknown>:0: error: cannot open file '/Users/jh/Library/Developer/Xcode/DerivedData/MyProject-epxolwjjgmimbdefugnlecrdysuv/Build/Intermediates.noindex/PrecompiledHeaders/MyProject-Bridging-Header-e8n926ydzbc0.dia' for diagnostics emission (No such file or directory)
/Users/jh/Library/Developer/Xcode/DerivedData/MyProject-epxolwjjgmimbdefugnlecrdysuv/Build/Intermediates.noindex/PrecompiledHeaders/MyProject-Bridging-Header-e8n926ydzbc0.dia:1:1: warning: Could not read serialized diagnostics file: error("Failed to open diagnostics file") (in target 'MyProject' from project 'MyProject')
Command PrecompileSwiftBridgingHeader failed with a nonzero exit code
Expo SDK version 44. I'm on a 2022 Mac Studio M1.
Okay, found the solution!
I had used npx react-native-rename to rename my project, but it didn't rename the Swift bridging header.
It's located in ios/MyProject/<oldname>-Bridging-Header.h.
renamed: ios/MyProject/OldName-Bridging-Header.h -> ios/MyProject/MyProject-Bridging-Header.h
While I was doing this, I also discovered that several of my bundle identifiers hadn't been moved over either. Do a codebase search for com.yourorganization.youroldbundlename to find & replace those too.
The locations I had to update:
./ios/MyProject.xcodeproj/project.pbxproj
./ios/MyProject/Info.plist
./app.json
Here is the logs I get when I try to build ios:
Project successfully prepared (ios)
Configure firebase
Building project...
Xcode build...
/Users/me/Desktop/vt/vt_tv/front/Native/App/platforms/ios/Pods/ASBPlayerSubtitling/ASBPlayerSubtitling/ASBPlayerSubtitling.m:41:1: warning:
method possibly missing a [super awakeFromNib] call [-Wobjc-missing-super-calls]
}
^
// Then I get a long list of my icon resources
warning: 'UILaunchImages' has been deprecated, use launch storyboards instead. (in target 'App' from project 'App')
error: cannot parse the debug map for '/Users/me/Desktop/vt/vt-tv/front/Native/App/platforms/ios/build/Debug-iphonesimulator/App.app/App': Is a directory
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at /BuildRoot/Library/Caches/com.apple.xbs/Sources/rsync/rsync-52.200.1/rsync/rsync.c(244) [sender=2.6.9]
Command PhaseScriptExecution failed with a nonzero exit code
note: Using new build system
note: Planning build
note: Constructing build description
** BUILD FAILED **
I just develop MOIP with ready-made components, but received the error after running.
Showed an error message:
"ld: file not found: /Users/teste/Library/Developer/Xcode/DerivedData/Moip_Store-fakuiehavrpkaeggjvvtbovybkyh/Build/Products/Debug-iphoneos/Moip Store.app/Moip Store
clang: error: linker command failed with exit code 1 (use -v to see invocation)"
site: https://github.com/moip/ios-sdk-sample
Someone solve this problem?
how?
Select your Project and choose your "Moip Store Test" - Target, go to "General" and set your Application as Host Application.