I need to get one date in one format like this:
2020-06-03T06:14:00.000+0100.
following this documentation page [1], I tried to do with this expression, but always get an error:
format-dateTime(current-dateTime(), "[Y0001]-[M01]-[D01]-[H01]:[m01]:[s][Z0000]")
I tried to put with this mask too:
format-dateTime(current-dateTime(), "[Y0001]-[M01]-[D01]-[H01]:[m01]:[s][Z0001]")
but the result is 2020-06-03-14:39:50+02:00
I need to delete the ":" on the offset, ¿Which mask may I use?
[1]https://www.rfc-editor.org/rfc/rfc3339#section-5.6
A workaround for your problem could be splitting the output of format-dateTime into two parts and remove the colon on the second expression:
concat(format-dateTime(current-dateTime(), "[Y0001]-[M01]-[D01]-[H01]:[m01]:[s]"),translate(format-dateTime(current-dateTime(), "[Z0001]"),":",""))
Maybe this works for you.
Related
I have the following log:
2016-10-20T23:56:42.000+00:00 clientIp:83.149.9.216 TransactionId=1233 TransactionType=Sell
How can i ignore the words clientIp:, TransactionId= and TransactionType= to match only the values?
If I modify my log to look like this:
2016-10-20T23:56:42.000+00:00 83.149.9.216 1233 Sell
And I use this pattern:
%{TIMESTAMP_ISO8601:timestamp} %{IP:clientIp} %{NUMBER:TransactionId} %{WORD:TransactionType}
It works.
So i need a way to read only the values after "word:" or "word="
Your pattern can include literals, e.g.
TransactionId=%{NUMBER:TransactionId}
I'm developing an app using Grails. I want to get length of array.
I got a wrong value. Here is my code,
def Medias = params.medias
println params.medias // I got [37, 40]
println params.medias.size() // I got 7 but it should be 2
What I did wrong ?
Thanks for help.
What is params.medias (where is it being set)?
If Grials is treating it as a string, then using size() will return the length of the string, rather than an array.
Does:
println params.medias.length
also return 7?
You can check what Grails thinks an object is by using the assert keyword.
If it is indeed a string, you can try the following code to convert it into an array:
def mediasArray = Eval.me(params.medias)
println mediasArray.size()
The downside of this is that Eval presents the possibility of unwanted code execution if the params.medias is provided by an end user, or can be maliciously modified outside of your compiled code.
A good snippet on the "evil (or lack thereof) of eval" is here if you're interested (not mine):
https://javascriptweblog.wordpress.com/2010/04/19/how-evil-is-eval/
I think 7 is result of length of the string : "[37,40]"
Seems your media variable is an array not a collection
Try : params.medias.length
Thanks to everyone. I've found my mistake
First of all, I sent an array from client and my params.medias returned null,so I converted it to string but it is a wrong way.
Finally, I sent and array from client as array and in the grails, I got a params by
params."medias[]"
List medias = params.list('medias')
Documentation: http://grails.github.io/grails-doc/latest/guide/single.html#typeConverters
I am using LoadRunner version 12.02 - Build 2739
Looking at an old, yet correct 'guide' shows that I have used the statements correctly (3rd Point, around 1/3rd of the way down the page, inside the code block - the atoi statement).
But I am still unable to convert the _count parameter to an int-Variable.
In the script, before the call is made;
web_reg_save_param(
"ParamName=rotaPeople",
"LB=someText",
"RB=\")",
"Ord=ALL",
LAST);
After the web call the save_param function is placed before, the output log shows;
Notify: Saving Parameter "ParamName=rotaPeople_count = 21".
Inside the script, after the call is made, and the count has been totaled;
lr_output_message("RP_C:%d",lr_eval_string("{rotaPeople_count}"));
lr_output_message("RP_C:%s",lr_eval_string("{rotaPeople_count}"));
peoplesCount = atoi(lr_eval_string("{rotaPeople_count}"));
lr_output_message("PC:%d",peoplesCount);
In the logs after the above executions are made;
Warning: The string 'rotaPeople_count' with parameter delimiters is not a parameter.
RP_C:110826864
Warning: The string 'rotaPeople_count' with parameter delimiters is not a parameter.
RP_C:{rotaPeople_count}
Warning: The string 'rotaPeople_count' with parameter delimiters is not a parameter.
PC:0
Anyone have any ideas?
Note: The Warning messages are expected
Note: Workaround: Used web_reg_save_param_regex() and created a regular expression. Using the returned _count parameter within a for-loop worked. Keeping question open, as the original problem still persists
The problem is that you use a soon to be deprecated API web_reg_save_param which does not support the ParamName syntax. In this API the second parameter is always the parameter name and therefore the correct use would be:
web_reg_save_param(
"rotaPeople",
"LB=someText",
"RB=\")",
"Ord=ALL",
LAST);
The proper API to use is web_reg_save_param_ex which does support the syntax you used so the call should look like:
web_reg_save_param_ex(
"ParamName=rotaPeople",
"LB=someText",
"RB=\")",
"Ord=ALL",
LAST);
Then the rest of your code should work properly.
I am not sure what you are doing but you might want to take a look at the somewhat unknown API lr_paramarr_random which will automatically pull a random value from the parameters array.
This should help you
web_reg_save_param(
"rotaPeople",
"LB=someText",
"RB=\")",
"Ord=ALL",
LAST);
lr_output_message("PC:%d",atoi(lr_eval_string("{rotaPeople_count}")));
You are using ord=all,see the run time data which value you want to capture,If you want to capture the 10th value please use ord=10,automatically this warning will remove from output log.
Example for capturing an array of dynamic values:
Action()
{
int i;
int ncount;
char ParamName[100];
web_set_sockets_option("SSL_VERSION", "TLS");
web_reg_save_param("trackingno","LB=;","RB= (NTN 0430)","search=All","ord=all",LAST);
web_submit_data("barcode.pl",
"Action=http://qtetools.rmtc.fedex.com/barcode/cgi-bin/barcode.pl",
"Method=POST",
"TargetFrame=",
"RecContentType=text/html",
"Referer=http://qtetools.rmtc.fedex.com/barcode/html/barcode.shtml",
"Snapshot=t2.inf",
"Mode=HTML",
ITEMDATA,
"Name=formcode", "Value=0430", ENDITEM,
"Name=count", "Value=10", ENDITEM,
"Name=narrow", "Value=2", ENDITEM,
LAST);
ncount= atoi(lr_eval_string("{trackingno_count}"));
for (i =1;i <= ncount;i++)
{
sprintf(ParamName, "{trackingno_%d}", i);
lr_output_message("Value of %s: %s",ParamName,lr_eval_string(ParamName));
}
return 0;
}
I have a date in "12/5/24" format and I am trying to use it in a JavaScript function.
How can I use the date with no quotation marks and with commas?:
Date.UTC(12,5,24)
This is what I am trying to achieve:
date = "12/5/24"
var = date.some_method #=> 12,5,24
Date.UTC(var)
Write as below :
string = "12/5/24"
Date.UTC(*string.split('/').map(&:to_i))
date_array = "12/5/24".split("/").collect(&:to_i)
Date.UTC(date_array[0], date_array[1], date_array[2])
All the split and gsub answers are "wrong", because they fit the anti-pattern "cause the bug, then fix the bug." (Yet they are not "completely wrong", because sometimes that anti-pattern is unfortunately the simplest option!)
Use Time.parse(date).strftime('%m,%d,%y'). That's why you have to escape each y token in a time template with a percent % - so you have a whole string to play with, and can put anything else in it. You could even put the rest of your Javascript in there.
Date.UTC( *"12/5/24".split('/') )
I have a string (from HTTP Header) and want to split it into a dictionary.
foo = \"bar\",baz=\"fooz\", beta= \"gamma\"
I ca not guarantee that the string is the same every time. Maybe there are spaces, maybe not, sometimes the double quotes are escaped, sometimes not.
So I found the solution in PHP with regular expressions. Unfortunately I can't convert it to work on iOS.
preg_match_all('#('.$key.')=(?:([\'"])([^\2]+?)\2|([^\s,]+))#', $input, $hits, PREG_SET_ORDER);
foreach ($hits as $hit) {
$data[hit[1]] = $hit[3] ? $hit[3] : $hit[4];
}
Can anybody help me converting this to Objective-C?
I met a guy which is kinda RegEx guru. He explained the whole stuff and I got the following (working!!!!) solution in RegEx.
This gives me strings like foo="bar":
(?<=[,\\s])((realm|qop|nonce|opaque)=(?:([\"'])([^\2]+?)\2|([^\\s,]+)))
I then use another RegEx to split it by key and value to create a dictionary.