While trying to install mkl library in Ubuntu 14.04 docker image, I am getting a gnutls_handshake failed error
To reproduce
docker pull mxnetci/publish.ubuntu1404_cpu
docker run -it mxnetci/publish.ubuntu1404_cpu sh
Install intel mkl
wget -qO - wget https://apt.repos.intel.com/intel-gpg-keys/GPG-PUB-KEY-INTEL-SW-PRODUCTS-2019.PUB | apt-key add -
sh -c "echo deb https://apt.repos.intel.com/mkl all main > /etc/apt/sources.list.d/intel-mkl.list"
apt-get update
Error
Err http://apt.repos.intel.com all/main amd64 Packages
gnutls_handshake() failed: Handshake failed
Refer steps : https://software.intel.com/en-us/articles/installing-intel-free-libs-and-python-apt-repo
Last version of MKL that supports Ubuntu 14.04 is MKL2018
https://software.intel.com/content/www/us/en/develop/articles/intel-math-kernel-library-intel-mkl-2018-system-requirements.html
Post that, MKL doesn't support Ubuntu 14.04 anymore.
https://software.intel.com/content/www/us/en/develop/articles/intel-math-kernel-library-intel-mkl-2020-system-requirements.html
https://software.intel.com/content/www/us/en/develop/articles/intel-math-kernel-library-intel-mkl-2019-system-requirements.html
the problem here is related to installation. MKL's system requirements contain only those OS's which are validated by this version of mkl. It means that if you copy mkl's binaries to requested OS, we expect MKL will work on Ubuntu v14. The same questions were regarding RH5 support, as an example.
Related
I am trying to install docker on Ubuntu 20.04. I have followed the instructions from here (or even here) which at some point lead to the creation of a nvidia-docker.list file (in order to install NVIDIA Container Toolkit):
# curl -s -L https://nvidia.github.io/nvidia-docker/ubuntu20.04/nvidia-docker.list > /etc/apt/sources.list.d/nvidia-docker.list
# cat nvidia-docker.list
deb https://nvidia.github.io/libnvidia-container/stable/ubuntu18.04/$(ARCH) /
#deb https://nvidia.github.io/libnvidia-container/experimental/ubuntu18.04/$(ARCH) /
deb https://nvidia.github.io/nvidia-container-runtime/stable/ubuntu18.04/$(ARCH) /
#deb https://nvidia.github.io/nvidia-container-runtime/experimental/ubuntu18.04/$(ARCH) /
deb https://nvidia.github.io/nvidia-docker/ubuntu18.04/$(ARCH) /
I have checked the actual file in the site and it's identical to the ubuntu 18.04 version.
That means it only contains entries from Ubuntu 18.04. Should this be the case? And if so, are there gonna be any compatibility issues? Should I continue and follow the instructions? Are they going to be updated later for example?
I wanted to install docker on my laptop to test and run my web applications on it's containers instead of virtual environment (I am running ubuntu desktop version 20.04 LTS and using pipenv for virtual environment). After signing up at hub.docker I went to https://docs.docker.com/engine/install/ubuntu/(hub.docker manual to install docker on ubuntu), I decided to install using the repository and typed following commands in terminal
1.sudo apt-get update
2.sudo apt-get install apt-transport-https ca-certificates curl gnupg-agent software-properties-common
3.curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
4.apt-key fingerprint 0EBFCD88
after running last command I got desired result which was
" pub rsa4096 2017-02-22 [SCEA]
9DC8 5822 9FC7 DD38 854A E2D8 8D81 803C 0EBF CD88
uid [ unknown] Docker Release (CE deb) docker#docker.com
sub rsa4096 2017-02-22 [S]"
As my system is amd64 I continued by
5.sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
6.sudo apt-get update
7.sudo apt-get install docker-ce docker-ce-cli containerd.io
8.sudo docker run hello-world
then at this point I got
"Unable to find image 'hello-world:latest' locally
docker: Error response from daemon: toomanyrequests: You have reached your pull rate limit. You may increase the limit by authenticating and upgrading: https://www.docker.com/increase-rate-limit.
See 'docker run --help'."
Questions
Did I do anything wrong in installation process?
How can I run to pull rate limit when I have just installed it?
Have docker correctly installed on my laptop? (when I type docker --version in terminal I get "Docker version 20.10.2, build 2291f61"
What should I do now?
I just installed docker myself and encountered the same error.
I don't think you have installed it wrong (since I'm a newbie myself I cannot confirm it 100%), but I solved this error by creating an account in docker website and then logged-in from CLI.
to create an account go to: https://www.docker.com/pricing
and then use signup for free.
To login through CLI type:
docker login -u your-username
and then it asks for your password, and then you are good to go!
My ubuntu version:
No LSB modules are available./
Distributor ID: Ubuntu /
Description: Ubuntu 18.04.3 LTS /
Release: 18.04 /
Codename: bionic
To install Docker Engine - Community, you need the 64-bit version of one of these Ubuntu versions:
Disco 19.04
Cosmic 18.10
Bionic 18.04 (LTS) (Mine)
Xenial 16.04 (LTS)
Steps I followed:
Uninstall old versions
$ sudo apt-get remove docker docker-engine docker.io containerd runc
Update the apt package index:
$ sudo apt-get update #HasErrors (2)
(1) Err:14 https://dl.bintray.com/rabbitmq/debian $distribution Release
404 Not Found [IP: 3.124. ..........]
------------------------------------------------
(2) E: The repository 'https://dl.bintray.com/rabbitmq/debian $distribution Release' does not have a Release file.
In consequence: When I get to step 3 in the webpage: https://docs.docker.com/install/linux/docker-ce/ubuntu/
$ sudo apt-key fingerprint 0EBFCD88
pub rsa4096 2017-02-22 [SCEA]
9DC8 5822 9FC7 DD38 854A E2D8 8D81 803C 0EBF CD88
uid [ unknown] Docker Release (CE deb) <docker#docker.com>
sub rsa4096 2017-02-22 [S]
I get this error:
Command 'pub' not found, did you mean:
command 'hub' from snap hub (v2.13.0)
command 'dub' from snap dub (1.15.0)
command 'pcb' from deb pcb-gtk
command 'pcb' from deb pcb-lesstif
command 'pua' from deb pglistener
command 'pudb' from deb python-pudb
command 'puf' from deb puf
command 'pdb' from deb python
command 'dub' from deb dub
command 'publ' from deb atfs
See 'snap info <snapname>' for additional versions.
I just want to install Docker for Ubuntu and i am a little stuck here
Instead of installing from the repository, why don't you try doing it directly.
sudo apt-get update
sudo apt-get remove docker docker-engine docker.io
sudo apt install docker.io
sudo systemctl start docker
sudo systemctl enable docker
If this works, you will notice it only works with sudo the workaround for this issue is mentioned here
Let me know if this doesn't work! I'm also quite confused as to why your errors include RabbitMQ when you are trying to install docker on ubuntu?
I run the same Docker build on two machines:
Ubuntu 16.04
Debian 9.7
Everything works fine in Ubuntu but this is the problem I have in Debian during the Docker build:
The command '/bin/sh -c php7 /installer.php --install-dir=/usr/bin --filename=composer' returned a non-zero code: 139
This is my Dockerfile:
FROM nginx:1.14-alpine
...
...
RUN curl https://getcomposer.org/installer -o /installer.php
RUN php7 /installer.php --install-dir=/usr/bin --filename=composer
...
...
In Linux, the error code 139 indicates a segmentation fault.
I have a memory of 15437156 kB on Debian (Docker version 18.06.2-ce) and 16147116 kB on Ubuntu (Docker version 18.05.0-ce).
Note: The problem happens during the build docker build ...
Do you know how to fix this on Debian?
I was facing the issuse
The command '/bin/sh -c rpm -ivh jdk-8u172-linux-x64.rpm' returned a non-zero code: 139
then i switched to using the legacy hyper-V instead of the WSL 2 that is provided by the docker engine, then everything worked fine
I was upgrading some versions and started hitting a similar issue to you, googled and found your post here. I was getting:
RUN php -r "copy('https://getcomposer.org/installer', 'composer-setup.php');" && php composer-setup.php && php -r "unlink('composer-setup.php');" && mv composer.phar /usr/local/bin/composer
---> Running in e73735530b5d
All settings correct for using Composer
Segmentation fault
After some testing I found that using FROM alpine:3.9 caused it to Seg fault every time, but downgrading my Alpine version to FROM alpine:3.8 stopped it occurring.
Not sure why though, but looks like there's something broken in the latest version of Alpine as I also didn't get this issue in Debian, Debian Slim, or Ubuntu 18:04.
I'm trying to create docker machine host using the following command in fedora OS version 25.
docker-machine create -driver=virtualbox host01
I get below error while executing the command.
Error with pre-create check: "We support Virtualbox starting with version 5. Your VirtualBox install is \"WARNING:
The vboxdrv kernel module is not loaded.
Either there is no module available for the current kernel (4.10.12-200.fc25.x86_64) or it failed to load.
Please try load the kernel module by executing as root
dnf install akmod-VirtualBox kernel-devel-4.10.12-200.fc25.x86_64 akmods --kernels 4.10.12-200.fc25.x86_64 && systemctl restart systemd-modules-load.service
You will not be able to start VMs until this problem is fixed.\\n5.1.26r117224\".
Please upgrade at https://www.virtualbox.org"
I have already virtualbox latest version installed. Running the command suggested by
sudo dnf install akmod-VirtualBox kernel-devel-4.10.12-200.fc25.x86_64 akmods --kernels 4.10.12-200.fc25.x86_64 && systemctl restart systemd-modules-load.service
I got the below error
Last metadata expiration check: 0:48:35 ago on Thu Aug 17 22:38:47 2017.
Package akmods-0.5.6-7.fc25.noarch is already installed, skipping.
No package --kernels available.
No package 4.10.12-200.fc25.x86_64 available.
Any suggestions?
I also had this problem and for this I upgrade Virtual box to 5.2 using following commands. This link help me
sudo apt-get remove virtualbox virtualbox-5.1
sudo sh -c 'echo "deb http://download.virtualbox.org/virtualbox/debian xenial contrib" >> /etc/apt/sources.list.d/virtualbox.list'
wget -q https://www.virtualbox.org/download/oracle_vbox_2016.asc -O- | sudo apt-key add -
wget -q https://www.virtualbox.org/download/oracle_vbox.asc -O- | sudo apt-key add -
sudo apt-get update
sudo apt-get install virtualbox-5.2
Hope this helps.
For windows users, in 2022 such problem still exists. So for those who use last build (now it is virtualBox-6.1.32-149290-Win), try to use version that starts with prefix 5. But not all '5' versions work. For example, for me worked only version 5.2.42 while versions: 5.2.18, 5.2.20, 5.2.44 didn't work
Helped for win 11 x64