UIBezierPath animation from circle to rounded square - ios

I'm trying to animate from a circle to a square with rounded corners. As far as I understand, number of points from both paths should be equal for smooth animation. So I wrote a function that builds a circle bases on a number of arcs:
private func circleShape(segmentNumber: Int = 8, radius: CGFloat = 32) -> CGPath {
let center = self.bounds.center
let circlePath = UIBezierPath()
let segmentAngle = CGFloat.pi * CGFloat(2) / CGFloat(segmentNumber)
var currentAngle: CGFloat = 0
for _ in 0 ..< segmentNumber {
let nextAngle = currentAngle + segmentAngle
circlePath.addArc(withCenter: center, radius: radius,
startAngle: currentAngle, endAngle: nextAngle, clockwise: true)
currentAngle = nextAngle
}
circlePath.close()
return circlePath.cgPath
}
I'm checking number of points with getPathElementsPointsAndTypes() and it increases unproportionally to the segmentNumber (segmentNumber: 1, points: 13; sN: 2, p: 14; sN: 3, p: 21; sN: 4, p: 16). So I can't find a segmentNumber that would give the same number of points (19) as the function that draws the square:
private func squareShape(size: CGFloat = 44, radius: CGFloat = 8) -> CGPath {
let rect = CGRect(center: self.bounds.center, size: CGSize(width: size, height: size))
let left = CGFloat.pi
let up = CGFloat(1.5) * CGFloat.pi
let down = CGFloat.pi / CGFloat(2)
let right = CGFloat(0.0)
let squarePath = UIBezierPath()
squarePath.addArc(withCenter: CGPoint(x: rect.minX + radius, y: rect.minY + radius), radius: radius, startAngle: left, endAngle: up, clockwise: true)
squarePath.addArc(withCenter: CGPoint(x: rect.maxX - radius, y: rect.minY + radius), radius: radius, startAngle: up, endAngle: right, clockwise: true)
squarePath.addArc(withCenter: CGPoint(x: rect.maxX - radius, y: rect.maxY - radius), radius: radius, startAngle: right, endAngle: down, clockwise: true)
squarePath.addArc(withCenter: CGPoint(x: rect.minX + radius, y: rect.maxY - radius), radius: radius, startAngle: down, endAngle: left, clockwise: true)
squarePath.close()
return squarePath.cgPath
}
Animation code:
let animation = CABasicAnimation(keyPath: "path")
animation.duration = 2
animation.toValue = self.circleShape()
animation.timingFunction = CAMediaTimingFunction(name: CAMediaTimingFunctionName.linear)
self.testLayer.add(animation, forKey: "pathAnimation")
Result:
What could I change to make the animation same smooth as in example without rounded rects?

You can simply have two paths
func circlePath () -> UIBezierPath {
return UIBezierPath(roundedRect: CGRect(x:0, y:0, width:50, height:50), cornerRadius: 25)
}
func squarePath () -> UIBezierPath {
return UIBezierPath(roundedRect: CGRect(x:0, y:0, width:30, height:30), cornerRadius: 4)
}

Related

Circular Bar Graph

One of the app I'm using has bar graph in circular shape. I've tried to create this by using UIBezierPath with arcCenter but I felt like this is completely wrong approach.
The code I'm currently using:
func drawGraph(){
var startDegrees = 120
for _ in 0...10{
let startAngle: CGFloat = radians(of: startDegrees)
let endAngle: CGFloat = radians(of: startDegrees + 5)
let center = CGPoint(x: bounds.midX, y: bounds.midY)
let radius = min(center.x, center.y) - trackBorderWidth / 2 - CGFloat(Int.random(in: 10...50))
let trackPath = UIBezierPath(arcCenter: center, radius: radius, startAngle: startAngle, endAngle: endAngle, clockwise: true)
trackPath.lineWidth = trackBorderWidth
trackPath.lineCapStyle = .square
trackBackgroundColor.set()
trackPath.stroke()
startDegrees += 7
}
}
Do you have better solutions or do you know any similar graph libraries like this?
EDIT:
So I've been trying to change my code little bit, I'm able to create something similar with this code:
func drawGraph(){
var temp:CGFloat = 120.0
for i in 0...64{
let startAngle: CGFloat = radians(of: temp)
let endAngle: CGFloat = radians(of: temp + 5)
let center = CGPoint(x: bounds.midX, y: bounds.midY)
let radius = min(center.x, center.y) - trackBorderWidth / 2 - 10
let randomNumber = CGFloat(Int.random(in: 10...20))
let trackPath = UIBezierPath(arcCenter: center, radius: radius + randomNumber / 2, startAngle: startAngle, endAngle: endAngle, clockwise: true)
trackPath.lineWidth = randomNumber
trackPath.lineCapStyle = .butt
UIColor.randomColor().set()
trackPath.stroke()
temp += 5.5
}
let circlePath = UIBezierPath(arcCenter: CGPoint(x: bounds.midX, y: bounds.midY), radius: 101, startAngle: CGFloat(0), endAngle:CGFloat(Double.pi * 2), clockwise: true)
let shapeLayer = CAShapeLayer()
shapeLayer.path = circlePath.cgPath
//change the fill color
shapeLayer.fillColor = UIColor.clear.cgColor
//you can change the stroke color
shapeLayer.strokeColor = UIColor.red.cgColor
//you can change the line width
shapeLayer.lineWidth = 3.0
self.layer.addSublayer(shapeLayer)
}

Set the radius of one corner of a SKShapeNode

I want to change the radius of two corners of a SKShapeNode (rect) but I didn't find a working solution.
I've tried to use a path, and it didn't work.
Swift 4.2, iOS 12.1.1, Xcode 10.1
let shape = SKShapeNode()
shape.path = UIBezierPath(roundedRect: CGRect(x: -128, y: -128, width: 256, height: 256), cornerRadius: 64).cgPath
shape.position = CGPoint(x: frame.midX, y: frame.midY)
shape.fillColor = UIColor.red
shape.strokeColor = UIColor.blue
shape.lineWidth = 10
addChild(shape)
I made a function that will allow you to customize each corner radius to whatever size you'd like. You can have 1,2,3 or 4 corners with a radius. If you always just want two corners then I would suggest making a wrapper function so you don't have so many parameters to fill in each time you call it.
func CustomRoundRectPath(_ rect:CGRect, _ TLR:CGFloat,_ TRR:CGFloat,_ BLR:CGFloat,_ BRR:CGFloat) -> CGPath {
let w = rect.width
let h = rect.height
//TLP:(TLP)
let TLP = CGPoint(x: TLR, y: h - TLR)
let TRP = CGPoint(x: w - TRR, y: h - TRR)
let BLP = CGPoint(x: BLR, y: BLR)
let BRP = CGPoint(x: w - BRR, y: BRR)
//Create path and addComponents
let path = CGMutablePath()
path.addArc(center: TLP, radius: TLR, startAngle: CGFloat.pi, endAngle: CGFloat.pi/2, clockwise: true)
path.addLine(to: CGPoint(x: TRP.x, y: h))
path.addArc(center: TRP, radius: TRR, startAngle: CGFloat.pi/2, endAngle: 0, clockwise: true)
path.addLine(to: CGPoint(x: w, y: BRP.y))
path.addArc(center: BRP, radius: BRR, startAngle: 0, endAngle: -CGFloat.pi/2, clockwise: true)
path.addLine(to: CGPoint(x: BLP.x, y: 0))
path.addArc(center: BLP, radius: BLR, startAngle: -CGFloat.pi/2, endAngle: -CGFloat.pi, clockwise: true)
path.addLine(to: CGPoint(x: 0, y: TLP.y))
return path
}

Swift: UIBezierPath Stroke Animation from Center

I've been making a simple UIBezierPath animation with Swift. This path consists on creating a rounded rectangle with a colored border. The animation must be the drawing of the colored border. To do so, I've created a CAShapeLayer with a UIBezierPath(roundedRect:, cornerRadius: )
let layer = CAShapeLayer()
var viewPrueba = UIView()
override func viewDidLoad() {
super.viewDidLoad()
// Do any additional setup after loading the view, typically from a nib.
viewPrueba = UIView(frame: CGRectMake(self.view.frame.width/2-100, self.view.frame.height/2 - 100, 200, 200))
self.view.addSubview(viewPrueba)
let path = UIBezierPath(roundedRect: CGRectMake(0, 0, 200, 200), cornerRadius: 40.0)
layer.path = path.CGPath
layer.fillColor = UIColor.clearColor().CGColor
layer.strokeColor = UIColor.blueColor().CGColor
layer.strokeStart = 0.0
layer.strokeEnd = 0.0
layer.lineWidth = 4.0
layer.lineJoin = kCALineJoinRound
viewPrueba.layer.addSublayer(layer)
let tapGR = UITapGestureRecognizer(target: self, action: #selector(ViewController.anim))
self.view.addGestureRecognizer(tapGR)
}
func anim() {
let anim1 = CABasicAnimation(keyPath: "strokeEnd")
anim1.fromValue = 0.0
anim1.toValue = 1.0
anim1.duration = 4.0
anim1.repeatCount = 0
anim1.autoreverses = false
anim1.removedOnCompletion = false
anim1.additive = true
anim1.fillMode = kCAFillModeForwards
self.layer.addAnimation(anim1, forKey: "strokeEnd")
}`
It works well. The only problem is that the animation starts from the top-left part of the square and not from the top-center. How can I do that?
The only thing I've found in order to achieve this is by doing it with a circle and not a rectangle, which is not what we want.
Thanks
CoreAnimate animated as the same order as which the UIBezierPath was drawn.
The system method
+ (instancetype)bezierPathWithRoundedRect:(CGRect)rect cornerRadius:(CGFloat)cornerRadius;
return a UIBezierPath which was drawn from the top-left,so your animation started from the top-left.
But you can create your own UIBezierPath drawn form top-center:
func centerStartBezierPath(frame:CGRect,cornerRadius:CGFloat) -> UIBezierPath {
let path = UIBezierPath()
path.moveToPoint(CGPointMake(frame.width/2.0, 0))
path.addLineToPoint(CGPointMake(frame.width-cornerRadius, 0))
path.addArcWithCenter(CGPointMake(frame.width-cornerRadius, cornerRadius),
radius: cornerRadius,
startAngle: CGFloat(-M_PI/2),
endAngle: 0,
clockwise: true)
path.addLineToPoint(CGPointMake(frame.width, frame.height-cornerRadius))
path.addArcWithCenter(CGPointMake(frame.width-cornerRadius, frame.height-cornerRadius),
radius: cornerRadius,
startAngle: 0,
endAngle: CGFloat(M_PI/2),
clockwise: true)
path.addLineToPoint(CGPointMake(cornerRadius, frame.height))
path.addArcWithCenter(CGPointMake(cornerRadius, frame.height-cornerRadius),
radius: cornerRadius,
startAngle: CGFloat(M_PI/2),
endAngle: CGFloat(M_PI),
clockwise: true)
path.addLineToPoint(CGPointMake(0, cornerRadius))
path.addArcWithCenter(CGPointMake(cornerRadius, cornerRadius),
radius: cornerRadius,
startAngle: CGFloat(M_PI),
endAngle: CGFloat(M_PI*3/2),
clockwise: true)
path.closePath()
path.applyTransform(CGAffineTransformMakeTranslation(frame.origin.x, frame.origin.y))
return path;
}
And it works like this:
You can also change the code,and start from any point you want.
Swift syntax changed much during these three years. Here is my updated version of originally accepted answer, but in Swift 5.1+
private extension UIBezierPath {
convenience init(roundedRectFromCenter frame: CGRect, cornerRadius: CGFloat) {
self.init()
move(to: CGPoint(x: frame.width / 2, y: 0))
addLine(to: CGPoint(x: frame.width - cornerRadius, y: 0))
addArc(
withCenter: CGPoint(x: frame.width - cornerRadius, y: cornerRadius),
radius: cornerRadius,
startAngle: -.pi / 2,
endAngle: 0,
clockwise: true
)
addLine(to: CGPoint(x: frame.width, y: frame.height - cornerRadius))
addArc(
withCenter: CGPoint(x: frame.width - cornerRadius, y: frame.height - cornerRadius),
radius: cornerRadius,
startAngle: 0,
endAngle: .pi / 2,
clockwise: true
)
addLine(to: CGPoint(x: cornerRadius, y: frame.height))
addArc(
withCenter: CGPoint(x: cornerRadius, y: frame.height - cornerRadius),
radius: cornerRadius,
startAngle: .pi / 2,
endAngle: .pi,
clockwise: true
)
addLine(to: CGPoint(x: 0, y: cornerRadius))
addArc(
withCenter: CGPoint(x: cornerRadius, y: cornerRadius),
radius: cornerRadius,
startAngle: .pi,
endAngle: .pi * 3 / 2,
clockwise: true
)
close()
apply(CGAffineTransform(
translationX: frame.origin.x,
y: frame.origin.y
))
}
}

custom UIButton with UIBezierPath

I'm making my own custom UIButton.
I subcalssed the UIButton class and drawRect function
this is my code:
override func drawRect(rect: CGRect)
{
let midPoint = CGPointMake(rect.midX, rect.midY)
if !self.selected
{
let redCircle = UIBezierPath()
let redCircleRadius = rect.width - self.whiteCirlceWidth - self.spaceBetweenCirclesWidth
redCircle.addArcWithCenter(CGPointMake(rect.midX, rect.midY), radius: redCircleRadius,
startAngle: 0 , endAngle: 2 * CGFloat(M_PI), clockwise: true)
let shapeLayer = CAShapeLayer()
shapeLayer.path = redCircle.CGPath
shapeLayer.fillColor = UIColor.redColor().CGColor
shapeLayer.strokeColor = UIColor.blackColor().CGColor
shapeLayer.lineWidth = 4.0
self.layer.addSublayer(shapeLayer)
let whiteCircle = UIBezierPath()
whiteCircle.addArcWithCenter(midPoint,
radius: self.bounds.width / 2,
startAngle: 0, endAngle: 2 * CGFloat(M_PI) , clockwise: true)
UIColor.whiteColor().setFill()
whiteCircle.fill()
}
else
{
let whiteCircle = UIBezierPath()
whiteCircle.addArcWithCenter(midPoint,
radius: self.bounds.width / 2,
startAngle: 0, endAngle: 2 * CGFloat(M_PI) , clockwise: true)
UIColor.whiteColor().setFill()
whiteCircle.fill()
let blankCircle = UIBezierPath()
blankCircle.addArcWithCenter(midPoint, radius: rect.width - self.whiteCirlceWidth - self.spaceBetweenCirclesWidth,
startAngle: 0, endAngle: 2 * CGFloat(M_PI), clockwise: true)
UIColor.blackColor().setFill()
blankCircle.fill()
var rect = CGRect(origin: midPoint, size: CGSizeMake(rect.width / 2, rect.width / 2))
rect.origin.x -= rect.origin.x / 2
rect.origin.y -= rect.origin.y / 2
let roundedRect = UIBezierPath(roundedRect: rect, cornerRadius: 3)
UIColor.redColor().setFill()
roundedRect.fill()
}
}
when I click on the button I do this
#IBAction func recordBtnClicked(sender : UIButton)
{
self.recordBtn.selected = !self.recordBtn.selected
self.recordBtn.setNeedsDisplay()
}
but it doesn't change anything!.
I checked in the debugger and it does the right block of code .
I checked two blocks and they do the right drawing
what's wrong?
I figured it out it was because I added a subLayer and it stucks and I didn't remove it ' so I changed the code and didn't used the sublayer.
you can remove the subLayer each time you call drawRect

How to create rounded corners with CAShapeLayer

Is there a way to add rounded corners to a CAShapeLayer? In my case I needed the shape layer to create a dashed border via lineDashPattern.
^ notice how the dashed line is not rounded
The answer is simple. Create a bézier path with rounded corners.
UPDATE for Swift
view.clipsToBounds = true
view.layer.cornerRadius = 10.0
let border = CAShapeLayer()
border.path = UIBezierPath(roundedRect:view.bounds, cornerRadius:10.0).cgPath
border.frame = view.bounds
border.fillColor = nil
border.strokeColor = UIColor.purple.cgColor
border.lineWidth = borderWidth * 2.0 // doubled since half will be clipped
border.lineDashPattern = [15.0]
view.layer.addSublayer(border)
Objective-C
// (This old code assumes this is within a view with a custom property "border".)
self.clipsToBounds = YES;
self.layer.cornerRadius = 10.0;
self.border = [CAShapeLayer layer];
self.border.fillColor = nil;
self.border.path = [UIBezierPath bezierPathWithRoundedRect:self.bounds cornerRadius:10.0].cgPath;
self.border.frame = self.bounds;
self.border.strokeColor = [UIColor purpleColor].CGColor;
self.border.lineWidth = borderWidth * 2; // double desired width as half will be clipped
self.border.lineDashPattern = #[#15];
[self.layer addSublayer:self.border];
In swift 4 I created a UIView category (UIView+Borders) with the following function:
func borderDash(withRadius cornerRadius: Float, borderWidth: Float, borderColor: UIColor, dashSize: Int) {
let currentFrame = self.bounds
let shapeLayer = CAShapeLayer()
let path = CGMutablePath()
let radius = CGFloat(cornerRadius)
// Points - Eight points that define the round border. Each border is defined by two points.
let topLeftPoint = CGPoint(x: radius, y: 0)
let topRightPoint = CGPoint(x: currentFrame.size.width - radius, y: 0)
let middleRightTopPoint = CGPoint(x: currentFrame.size.width, y: radius)
let middleRightBottomPoint = CGPoint(x: currentFrame.size.width, y: currentFrame.size.height - radius)
let bottomRightPoint = CGPoint(x: currentFrame.size.width - radius, y: currentFrame.size.height)
let bottomLeftPoint = CGPoint(x: radius, y: currentFrame.size.height)
let middleLeftBottomPoint = CGPoint(x: 0, y: currentFrame.size.height - radius)
let middleLeftTopPoint = CGPoint(x: 0, y: radius)
// Points - Four points that are the center of the corners borders.
let cornerTopRightCenter = CGPoint(x: currentFrame.size.width - radius, y: radius)
let cornerBottomRightCenter = CGPoint(x: currentFrame.size.width - radius, y: currentFrame.size.height - radius)
let cornerBottomLeftCenter = CGPoint(x: radius, y: currentFrame.size.height - radius)
let cornerTopLeftCenter = CGPoint(x: radius, y: radius)
// Angles - The corner radius angles.
let topRightStartAngle = CGFloat(Double.pi * 3 / 2)
let topRightEndAngle = CGFloat(0)
let bottomRightStartAngle = CGFloat(0)
let bottmRightEndAngle = CGFloat(Double.pi / 2)
let bottomLeftStartAngle = CGFloat(Double.pi / 2)
let bottomLeftEndAngle = CGFloat(Double.pi)
let topLeftStartAngle = CGFloat(Double.pi)
let topLeftEndAngle = CGFloat(Double.pi * 3 / 2)
// Drawing a border around a view.
path.move(to: topLeftPoint)
path.addLine(to: topRightPoint)
path.addArc(center: cornerTopRightCenter,
radius: radius,
startAngle: topRightStartAngle,
endAngle: topRightEndAngle,
clockwise: false)
path.addLine(to: middleRightBottomPoint)
path.addArc(center: cornerBottomRightCenter,
radius: radius,
startAngle: bottomRightStartAngle,
endAngle: bottmRightEndAngle,
clockwise: false)
path.addLine(to: bottomLeftPoint)
path.addArc(center: cornerBottomLeftCenter,
radius: radius,
startAngle: bottomLeftStartAngle,
endAngle: bottomLeftEndAngle,
clockwise: false)
path.addLine(to: middleLeftTopPoint)
path.addArc(center: cornerTopLeftCenter,
radius: radius,
startAngle: topLeftStartAngle,
endAngle: topLeftEndAngle,
clockwise: false)
// Path is set as the shapeLayer object's path.
shapeLayer.path = path;
shapeLayer.backgroundColor = UIColor.clear.cgColor
shapeLayer.frame = currentFrame
shapeLayer.masksToBounds = false
shapeLayer.setValue(0, forKey: "isCircle")
shapeLayer.fillColor = UIColor.clear.cgColor
shapeLayer.strokeColor = borderColor.cgColor
shapeLayer.lineWidth = CGFloat(borderWidth)
shapeLayer.lineDashPattern = [NSNumber(value: dashSize), NSNumber(value: dashSize)]
shapeLayer.lineCap = kCALineCapRound
self.layer.addSublayer(shapeLayer)
self.layer.cornerRadius = radius;
}

Resources