How can I access the hosts network with a docker container? Can I put a container in the hosts network with another IP from the hosts network?
Current situation:
Docker container (default bridge network): 172.17.0.2/16
Host (server): 10.0.0.2/24
Question:
Can I put the docker container on the 10.0.0.0/24 network as a secondary address?
(or) Can I access the hosts network on the container and vica versa?
Reason:
I want to access the hosts network from my container (for example: monitoring server).
I want the container to act as a server accessible from the hosts network on all ports.
Note:
I run several docker containers so a few ports are already forwarded from the host and these should remain so. So an all-port-forward from the hosts IP isn't really a solution here.
Setup on host:
basic docker system
Centos 7
Macvlan networks may be the solution you are looking for.
You could assign multiple MAC/IP addresses on virtual NICs over single physical NIC.
There are some prerequisites for using Macvlan.
Related
I have several containers running in a stack controlled by docker-compose.
Amongst these is one running node-red.
The node-red container needs to be able to search the network for a device that is on the hosts network (192.168.1.0/24).
With the default networking the containers can ping and connect to the host network when they know the IP, unfortunately the node-red implementation only scans the local networks, and it only has the docker bridge network (172...) so it only searches there.
I've tried multiple combinations of the docker network setups to try and get the containers to see the 192 network as local. When I am able to get a 192 network address, the containers can not ping other hosts on the external (to the host machine) network.
TLDR: Docker container needs to be able to see other docker containers and also have an IP address on the hosts network and be able to connect to other services on the hosts network.
Okay, I found a solution that works for me:
In the docker-compose.yml
app:
image: youimage
network_mode: "host"
adding the network_mode: "host" was what I needed
I have an headless server with VirtualBox. It run multiple virtual machines. One of them is a web proxy. It redirect external access to the right VM in function of the subdomain. Those VMs are communicating between them with internal network (intnet).
I would like to add some docker container to this configuration. How could I successfully create a network shared between my docker containers and this proxy VM ?
I tried to create a bridge network with docker docker network create my_net and then connect the VM with a additional network card in 'bridged' mode.
With this config ping works but not the actual connection. It isn't impossible to display the web page into a browser.
Am I missing some configuration here ? Also, is it a good practice to connect one VM to a docker network ?
Run the containers on one of the VMs. Use a totally normal Docker setup here: create a network for inter-container communication but don't configure it, and completely ignore the container-private network details and IP addresses.
When you use the docker run -p option, that will publish a container's port on its VM's network interface(s). From that point, other VMs can call the published port using that VM's IP address, just as if it were a non-container process running on the VM. Conversely, containers should be able to make outbound calls to the other VMs without special setup.
My program is consisting of a network of ROS1 and ROS2 nodes, which are software that work with a publish/subscribe way of communication.
Assume there is 4 nodes running inside a custom network: onboard_network.
Those 4 nodes (ROS1) can only communicate together, therefore we have a bridge node (ROS1 & ROS2) that needs to be sitting on the edge on both onboard_network and host network. The reason why we need the host network is because the host is inside a VPN (Zerotier). Inside the VPN we have also our server (ROS2).
We also need the bride node to work with host network because ROS2 work with some multicast stuff that works only on host mode.
So basically, I want a docker compose file running 4 containers inside an onboard_network & a container running inside the host network. The last container needs to be seen from the containers in the onboard_network and being able to see them too. How could I do it ? Is it even possible ?
If you're running a container on the host network, its network setup is identical to a non-container process running on the host.
A container can't be set to use both host networking and Docker networking.
That means, for your network_mode: host container, it can call other containers using localhost as a hostname and their published ports: (because its network is the host's network). For your bridge-network containers, they can call the host-network container using the special hostname host.docker.internal on MacOS or Windows hosts, or on Linux they need to find some reachable IP address (this is discussed further in From inside of a Docker container, how do I connect to the localhost of the machine?.
I'm trying to better understand docker networking, but I'm confused by the following:
I spin up 2 contains via docker-compose (client, api). When I do this, a new network is created, myapp_default, and each container joins this network. The network is a bridge network, and it's at 172.18.0.1. The client is at 172.18.0.2 and the api is at 172.18.0.3.
I can now access the client at 172.18.0.2:8080 and the api at 172.18.0.3:3000 -- this makes total sense. I'm confused when I publish ports in docker-compose: 8080:8080 on the client, and 3000:3000 on the api.
Now I can access the containers from:
Client at 172.18.0.1:8080, 172.18.0.2:8080, and on the docker0 network at 172.17.0.1:8080
API at 172.18.0.1:3000, 172.18.0.3:8080, and on the docker0 network at 172.17.0.1:3000
1) Why can I access the client and api via the docker0 network when I publish ports?
2) Why can I connect to containers via 172.17.0.1 and 172.18.0.1 at all?
You can only access the container-private IP addresses because you're on the same native-Linux host as the Docker daemon. This doesn't work in any other environment (different hosts, MacOS or Windows hosts, environments like Docker Toolbox where Docker is in a VM) and even using docker inspect to find these IP addresses usually isn't a best practice.
When you publish ports they are accessible on the host at those ports. This does work in every environment (in Docker Toolbox "the host" is the VM) and is the recommended way to access your containers from outside Docker space. Unless you bind to a specific address, the containers are accessible on every host interface and every host IP address; that includes the artificial 172.17.0.1 etc. that get created with Docker bridge networks.
Publishing ports is in addition to the other networking-related setup Docker does; it doesn't prevent you from reaching the containers by other paths.
If you haven't yet, you should also read Networking in Compose in the Docker documentation. Whether you publish ports or not, you can use the names in the docker-compose.yml file like client and api as host names, connecting the the (unmapped) port the actual server processes are listening on. Between this functionality and what you get from publishing ports you don't ever actually need to directly know the container-private IP addresses.
I'm deploying a stack of services through the command:
docker stack deploy -c <docker-compose.yml> <stack-name>
And I'm mapping ports of one of these services on docker compose with ports: 8000:8000.
The network driver being used is overlay.
I can access these services via localhost:8000, via Peers IP(?).
When I inspect the network created, I can see the local IPs of each container (for instance, 10.0.1.2). But Where is the external IP of container (the one like 172.0. ...) ?
I am running these docker container on a virtual machine ubuntu.
How can I access the services running on containers from other nodes running on other networks? Isn't possible to access via hostIP:port?
If so, how do I get the host IP? When I do docker-machine IP I get "host is not running".
[EDIT: I wasn't doing port mapping between the host and the VM in virtualbox. Now it works!]
Whats the best way to communicate between containers on the same swarm?
Thanks
Whats the best way to communicate between containers on the same swarm? Through name discovery?
In general if you communicate between containers you should use the container/service name.
And for your other problem you probably wan't a reverse proxy like nginx or traefik.