RemoveRange not deleting all records - asp.net-mvc

The following method should delete all old data however, when I did my investigation I found out that some of the data in the database was not delete even though the posted date was within the range. Can someone explain why?
Data That did not get deleted:
19/02/2020
01/04/2020
24/03/2020
public ActionResult DeleteOldData()
{
for(int i = 8; i < 900; i++)
{
DateTime now = DateTime.Now;
var time = now.AddDays(-i).ToString("dd/MM/yyyy").ToString();
db.Data.RemoveRange(db.Data.Where(a => a.PostedDate == time).ToList());
db.SaveChanges();
}
return View();
}


The preferrable comparison operator for this one is just comparing the 2 dates with <= but the dilemma is you're storing the date as a string, hence we can't compare it directly using LINQ, need to do a workaround like below;
Try the code below, try it also without the loop;
DateTime now = DateTime.Now;
var time = now.AddDays(-i).ToString("dd/MM/yyyy").ToString();
var dateList = db.Data.ToList();
List<Data> toDelete = new List<Data>();
foreach(var item in dateList){
if(Convert.ToDateTime(a.PostedDate) <= Convert.ToDateTime(time)){
toDelete.Add(item);
}
}
db.Data.RemoveRange(toDelete);
db.SaveChanges();

Related

Set format of cells produced by LoadFromCollection (epplus) using data annotation

I am using eeplus to create an excel spreadsheet, like this
using (var pck = new ExcelPackage())
{
var ws = pck.Workbook.Worksheets.Add("Customers");
ws.Cells["A1"].LoadFromCollection(customers, PrintHeaders: true);
var ms = new System.IO.MemoryStream();
pck.SaveAs(ms);
ms.WriteTo(Response.OutputStream);
}
The customer class has properties like
[DisplayName("Customer creation date")]
public DateTime Created { get; set; }
DisplayName seems to get honored, so the topmost line will read Customer creation date but the cell contents show up as 43257,41667.
What I would really like to have is cells that has the format 2018-04-05.
Can I do that will data annotations? I tried both
[DisplayName("Customer creation date")]
[DisplayFormat(DataFormatString = "{0:yyyy-MM-dd}")]
public DateTime Created { get; set; }
and
[DisplayName("Customer creation date")]
[DataType(DataType.Date)]
public DateTime Created { get; set; }
but the cell contents remains the same.

No, EPPlus doesnot format your data according to data annotations.
It formats date as integers, so you should specify the column you wish to format as
ws.Column(colPosition+1).Style.Number.Format="yyyy-mm-dd";
You can find details here:
https://github.com/JanKallman/EPPlus/wiki/Formatting-and-styling
https://codereview.stackexchange.com/questions/139569/ensuring-specific-columns-in-an-excelworksheet-format-as-shortdate

EPPlus always changed column name while updating into excel based upon DisplayName Attribute else if there is no DisplayName Attribute is set, then it will Find "_" (underscore) character & replace it with " " (Space) Character in the column name, Due to which we cannot easily find PropertyInfo with help of column name to format the column as per our need.
Here is the simple & quickest solution to format column based upon indexing the PropertyInfo
PropertyInfo[] props = typeof(T).GetType().GetProperties(BindingFlags.Public | BindingFlags.Instance);
for (int i = 0; i < props.Length; i++)
{
Type t = props[i].PropertyType;
if (t == typeof(DateTime) || t == typeof(DateTime?))
ws.Column(i + 1).Style.Numberformat.Format = "dd-MMM-yyyy HH:mm:ss";
else if (t == typeof(TimeSpan) || t == typeof(TimeSpan?))
ws.Column(i + 1).Style.Numberformat.Format = "HH:mm:ss";
}
I have another solution if you need to format columns based upon column names.
void ApplyDateTimeFormatting<T>(ExcelWorksheet ws, IEnumerable<T> data)
{
if (data.Count() == 0)
return;
Type type = data.First().GetType();
for (int c = 1; c <= toColumns; c++)
{
string column = ws.Cells[1, c].Text;
var t = type.GetPropertyWithDisplayName<T>(column).PropertyType;
if (t == typeof(DateTime) || t == typeof(DateTime?))
ws.Column(c).Style.Numberformat.Format = "dd-MMM-yyyy HH:mm:ss";
else if (t == typeof(TimeSpan) || t == typeof(TimeSpan?))
ws.Column(c).Style.Numberformat.Format = "HH:mm:ss";
}
}
PropertyInfo GetPropertyFromDisplayName(Type type, string DisplayName)
{
MemberInfo[] members = type.GetProperties(BindingFlags.Public | BindingFlags.Instance);
foreach (var member in members)
{
DisplayNameAttribute displayNameAttribute = member
.GetCustomAttributes(typeof(DisplayNameAttribute), inherit: false)
.FirstOrDefault() as DisplayNameAttribute;
string text = ((displayNameAttribute == null) ? member.Name.Replace('_', ' ') :
displayNameAttribute.DisplayName);
if (text == DisplayName)
return type.GetProperty(member.Name);
}
return null;
}

I solved it as follows, so I just load the model and change as per my model if it is int or datetime
var li = typeof(Model).GetProperties().ToArray();
using (var package = new ExcelPackage(stream))
{
var workSheet = package.Workbook.Worksheets.Add("Sheet1");
var i = 0;
foreach (var c in li)
{
i++;
if(c.PropertyType.Name == typeof(DateTime).Name || c.PropertyType.Name == typeof(DateTime?).Name)
workSheet.Column(i).Style.Numberformat.Format = DateTimeFormatInfo.CurrentInfo.ShortDatePattern; ;
if (c.PropertyType.Name == typeof(int).Name || c.PropertyType.Name == typeof(int?).Name)
workSheet.Column(i).Style.Numberformat.Format = "0";
}
}

How can I get originalvalues from EF savechanges for complex primary key

i've implemented audit log for all my db objects but i'm running into an issue because of a special case.
i have code similar to the following.
private IEnumerable<CDMA_CHANGE_LOG> GetAuditRecords(DbEntityEntry ent, string userId, string primaryKeyId, bool updateFlag, object originalEntity)
{
List<CDMA_CHANGE_LOG> result = new List<CDMA_CHANGE_LOG>();
string changeId = Guid.NewGuid().ToString();
TableAttribute tableAttr = ent.Entity.GetType().GetCustomAttributes(typeof(TableAttribute), false).SingleOrDefault() as TableAttribute;
// Get table name (if it has a Table attribute, use that, otherwise get the pluralized name)
string entityName = tableAttr != null ? tableAttr.Name : ObjectContext.GetObjectType(ent.Entity.GetType()).Name;
var changeTime = DateTime.UtcNow;
if (ent.State == EntityState.Modified)
{
foreach (var prop in ent.OriginalValues.PropertyNames)
{
//we cant use this because getdatabasevalues will error out when there are 2 rows in the db for this primarykey (U,A)
//var originalValue = ent.GetDatabaseValues().GetValue<object>(prop) == null ? "" : ent.GetDatabaseValues().GetValue<object>(prop).ToString();
var currentValue = ent.CurrentValues[prop] == null ? "" : ent.CurrentValues[prop].ToString();
// For updates, we only want to capture the columns that actually changed
var primaryKey = GetPrimaryKeyValue(ent);
if (originalValue != currentValue)
{
result.Add(new CDMA_CHANGE_LOG()
{
USERID = userId,
DATECHANGED = changeTime,
EVENTTYPE = "M", // Modified
ENTITYNAME = entityName,
PRIMARYKEYVALUE = primaryKey.ToString(),
PROPERTYNAME = prop,
OLDVALUE = originalValue,
NEWVALUE = currentValue,
CHANGEID = changeId
});
}
}
}
return result;
}
now i cant use originalValue = ent.GetDatabaseValues().GetValue(prop) because the records have two fields as primary key so i thought i could query the original value manually from the controller and send as
object originalEntity
so i'm wondering how do i cast originalEntity to the current entity
var originalValues = Convert.ChangeType(originalEntity, ent.GetType());
does not work.
i'm finding it difficult to get. thanks for any help.

How to get number of days between two dates in asp.net MVC using Linq

I need to get the number of days between two dates from database using Linq Query, please help me how to do this. thanks
I tried the bellow code but it return me the result nul! please help
DateTime rightNow = DateTime.Now;
//int totalDays = (from d in db.vuExpiredProjectsAssigned
// where d.AssignedTo==obj.DepartmentID
// select (d.AssignedDate - d.DueDate).Days).FirstOrDefault();
//var numberdays = (from pd in db.vuExpiredProjectsAssigned
// where pd.AssignedTo == obj.DepartmentID
// select SqlFunctions.DateDiff("day", pd.AssignedDate, rightNow));
var result =(from dd in db.vuExpiredProjectsAssigned
where dd.AssignedTo==obj.DepartmentID
select new
{
days=SqlFunctions.DateDiff("Day",dd.DueDate,rightNow)
});
ViewBag.ndays = result;

Arithmetic with DateTime is not supported in Entity Framework. You have to use DbFunctions*. So, for the first part of your statement, something like:
var numberdays = ( from p in db.vuExpiredProjectsAssigned
where p.AssignedTo == obj.DepartmentID
select DbFunctions.DiffDays(p.AssignedDate,p.DueDate));
OR
var numberdays = ( from p in db.vuExpiredProjectsAssigned
where p.AssignedTo == obj.DepartmentID
select SqlFunctions.DateDiff("day", p.AssignedDate, p.DueDate));
For more reference please check below links.
SqlFunctions Class
DbFunctions Class

try with this
DbFunctions.DiffDays(dd.DueDate,rightNow).Value
Update
var rightNow= DateTime.Today.ToShortDateString();
public class democlass
{
public int count {get; set;}
}
and query like this
var result =(from dd in db.vuExpiredProjectsAssigned
where dd.AssignedTo==obj.DepartmentID
select new democlass()
{
count = DbFunctions.DiffDays(dd.DueDate,rightNow).Value
});
then check your result variable.

As long as you are not using the difference in days in the where clasuse, then it is better to do this calculation in your code instead of adding overhead to SQL, so change your code to:
public class democlass
{
public DateTime DueDate{get;set;}
public int count {get; set;}
}
var result =((from dd in db.vuExpiredProjectsAssigned
where dd.AssignedTo==obj.DepartmentID
select new democlass()
{
DueDate= dd.DueDate;
})).ToList();
result.ForEach(a=> {a.count = a.DueDate.Subtract(DateTime.Now).TotalDays});

Google Sheets Lookup Tool Assistance

I've taken it upon myself the learn how to "excel". That made a little more sense in my head, but hey.
I have built a "lookup tool" which can be viewed here.
The "Dishwasher search" is working as intended. You can search by noise level or decor panel height to create a list of suitable models then pull the data into an individual search by product code/model no.
I decided to make it a little more difficult and created one for Ovens.
The Layout is like this; Main search>Single Oven Database>Double Oven Database>Built-under oven database.
My goal is to achieve the same search facilities as the "Dishwasher tool", however I have been unsure how to search (Vlookup) from different sources.
I have tried creating a "Master DB" using the formula below;
={Importrange("1mY13e-75dBYfKgkjV8dFFFEvxC838nGNxPrUdusc0PA", "'Single Ovens'!$A:$F");Importrange("1mY13e-75dBYfKgkjV8dFFFEvxC838nGNxPrUdusc0PA", "'Double Ovens'!$A:$F");Importrange("1mY13e-75dBYfKgkjV8dFFFEvxC838nGNxPrUdusc0PA", "'Built-Under Ovens'!$A:$F")))}
However, it only seems to pull data from the first range not the others unless I do it horizontaly rather than vertical, but horizontal wont work with my Vlookup formula (To my knowledge).
The other method I have tried is using this code;
=IF(AND($A$19="Single Oven",$A$4>0), Vlookup($A$4,'Single Ovens'!$B:$F,1,False),IF(AND($A$10="Double Oven",$A$4>0), Vlookup($A$4,'Double Ovens'!$B:$F,1,False),If(AND($A$10="Built-Under Oven",$A$4>0), Vlookup($A$4,'Built-Under Ovens'!$B:$F,1,False),IF($A$10="Single Oven",Vlookup($A$7,'Single Ovens'!$A:$F,2,False),IF($A$10="Double Oven", Vlookup($A$7,'Double Oven'!$A:$F,2,False),If($A$10="Built-Under Oven", Vlookup($A$7,'Built-Under Oven'!$A:$F,2,False)))))))
The above code was inserted and was "meant" to Vlookup all 3 sheets and pull "product Code" through to populate Cell D4 on sheet 'Ovens'.
Now, I'm a bit of a novice at this but I'm working to understand it all :)
Any suggestions you guys can make or point me in the right direction?
Edit -
Sorry guys. It was rude not to post my solution. I have changed my Importrange function to =Importrange("XYZ",""'Single Ovens'!$A2:$F200") and repeated this 3 times with a gap of 200 "rows" between each one. Not a solution, but a viable alternative. My friend is currently working on a script for me to achieve this. The Vlookup formula no longer needs to be as complex thanks to the importrange formula simplifying matters.

So after discussing the problem with McSheehy, and the problem is actually this.
How to get data from ONE spreadsheet, multiple sheets of my choice.
and write To MANY spreadsheets, Multiple sheets within those spreadsheets, of my choice.
Once that data is in the right place, the current formulas should work or can be adapted easily.
I came up with a script solution,
The user creates a settings sheet in the source sheet.
In A2 downwards, Target spreadsheet keys, B2 downwards, Source sheet names you wish to include from current sheet. C2 downwards is the target SHEET names, if you wanted to write data to more than one sheet.
Bits of code are annotated to help explain McSheehy's questions on how it works.
If anyone has any improvements to suggest, and I'm sure there are some, particular the headers bit. (its not needed, but my clearContent/clearConents line kept flipping out), I'm all ears.
Thanks
function getOvenDataV5(){
var settingsSheetName = "monkey_settings";
/* DO NOT EDIT BELOW THIS LINE */
var ss = SpreadsheetApp.getActiveSpreadsheet();
var settings = ss.getSheetByName(settingsSheetName);
// this bit has been edited, note the getValues, not getValue, as we want the whole column now not just a single cell.
var targetSheetsValues = settings.getRange("C2:C").getValues(); // this gets the target sheet names from the settings sheet
var targetSheets = []; // And array added to throw target sheet names into, as there is more than one.
// the reason we use arrays and loops (later on), is because the script has no idea how much data to expect.
// so we go through whatever it's grabbed, the stuff it thinks is data, but we check it later on.
// only a simple check. Our check is that it cannot be blank. ""
// then stuff it in an array, a handy thing to store data, for use later on.
var sSheets = settings.getRange("B2:B").getValues();
var sourceSheets = [];
// new loop below to get the target sheets names. We'll use this in the write bit later.
for(var i = 0; i < targetSheetsValues.length;i++){
if(targetSheetsValues[i][0]!=""){
targetSheets.push(targetSheetsValues[i]);
}
}
for(var i = 0; i < sSheets.length;i++){
if(sSheets[i][0]!=""){
sourceSheets.push(sSheets[i]);
}
}
var dKeys = settings.getRange("A2:A").getValues();
var sKeys = [];
for(var i = 0; i < dKeys.length;i++){
if(dKeys[i][0]!=""){
sKeys.push(dKeys[i]);
}
}
var data = [];
for (var i = 0; i < sourceSheets.length;i++){
var values = ss.getSheetByName(sourceSheets[i]).getDataRange().getValues();
for (var x = 1;x < values.length; x++){
if(values[x][0]!= ""){
data.push(values[x]);
}
}
}
// Below is an array of your column headers, the script was being annoying when clearing sheet data, so decided to clear the whole damn sheet
// then write the headers via here instead
var headers = [["Model No", "Product Code", "Brand", "Model No", "kW", "Amp"]];
for (var i = 0; i< sKeys.length;i++){
var tss = SpreadsheetApp.openById(sKeys[i]);
for(var x = 0; x < targetSheets.length;x++){ // this loop, within the keys loop, goes through the target sheets array
var target = tss.getSheetByName(targetSheets[x]); // this loads the target sheet, one by one
var range = target.getRange(2,1, data.length, data[0].length); // this gets the cells to write to
target.clearContents(); // clear the sheet before writing data
target.getRange("A1:F1").setValues(headers); // write the headers to a1:F1 in target sheet
range.setValues(data); //write the data
}
}
}

I dont know if they will be of any value but here are two things that i wrote in script.
The follow is a vlookup script to set or return to memory with hints of query ish abilites.
//~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`
//--//Dependent on isEmpty_()
// Script Look-up
/*
Benefit of this script is:
-That google sheets will not continually do lookups on data that is not changing with using this function as it is set with hard values until script is kicked off again.
-Unlike Vlookup you can have it look at for reference data at any Column in the row. Does not have to be in the first column for it to work like Vlookup.
-You can return the Lookup to Memory for further processing by other functions
Useage:
Lookup_(Sheetinfo,"Sheet1!A:B",0,[1],"Sheet1!I1","n","y");
//or
Lookup_(Sheetinfo,"Sheet1!A:B",0,[1],"return","n","n");
//or
Lookup_(Sheetinfo,"Sheet1!A:B",0,[0,1],"return","n","n");
//or
Lookup_(Sheetinfo,"Sheet1!A:B",1,[0],"return","y","n");
//or
Lookup_("cat","Sheet1!A:G",4,[0],"Database!A1","y","y");
-Loads all Locations numbers from J2:J into a variable
--looks for Location Numbers in Column 0 of Referance sheet and range eg "Data!A:G"
---Returns results to Column 3 of Target Sheet and range eg "test!A1" or "1,1"
*/
function Lookup_(Search_Key,RefSheetRange,SearchKey_Ref_IndexOffSet,IndexOffSetForReturn,SetSheetRange,ReturnMultiResults,Add_Note)
{
var RefSheetRange = RefSheetRange.split("!");
var Ref_Sheet = RefSheetRange[0];
var Ref_Range = RefSheetRange[1];
if(!/return/i.test(SetSheetRange))
{
var SetSheetRange = SetSheetRange.split("!");
var Set_Sheet = SetSheetRange[0];
var Set_Range = SetSheetRange[1];
var RowVal = SpreadsheetApp.getActive().getSheetByName(Set_Sheet).getRange(Set_Range).getRow();
var ColVal = SpreadsheetApp.getActive().getSheetByName(Set_Sheet).getRange(Set_Range).getColumn();
}
var twoDimensionalArray = [];
var data = SpreadsheetApp.getActive().getSheetByName(Ref_Sheet).getRange(Ref_Range).getValues(); //Syncs sheet by name and range into var
for (var i = 0, Il=Search_Key.length; i<Il; i++) // i = number of rows to index and search
{
var Sending = []; //Making a Blank Array
var newArray = []; //Making a Blank Array
var Found ="";
for (var nn=0, NNL=data.length; nn<NNL; nn++) //nn = will be the number of row that the data is found at
{
if(Found==1 && ReturnMultiResults.toUpperCase() == 'N') //if statement for found if found = 1 it will to stop all other logic in nn loop from running
{
break; //Breaking nn loop once found
}
if (data[nn][SearchKey_Ref_IndexOffSet]==Search_Key[i]) //if statement is triggered when the search_key is found.
{
var newArray = [];
for (var cc=0, CCL=IndexOffSetForReturn.length; cc<CCL; cc++) //cc = numbers of columns to referance
{
var iosr = IndexOffSetForReturn[cc]; //Loading the value of current cc
var Sending = data[nn][iosr]; //Loading data of Level nn offset by value of cc
if(isEmpty_(Sending)) //if statement for if one of the returned Column level cells are blank
{
var Sending = "#N/A"; //Sets #N/A on all column levels that are blank
}
if (CCL>1) //if statement for multi-Column returns
{
newArray.push(Sending);
if(CCL-1 == cc) //if statement for pulling all columns into larger array
{
twoDimensionalArray.push(newArray);
var Found = 1; //Modifying found to 1 if found to stop all other logic in nn loop
break; //Breaking cc loop once found
}
}
else if (CCL<=1) //if statement for single-Column returns
{
twoDimensionalArray.push(Sending);
var Found = 1; //Modifying found to 1 if found to stop all other logic in nn loop
break; //Breaking cc loop once found
}
}
}
if(NNL-1==nn && isEmpty_(Sending)) //following if statement is for if the current item in lookup array is not found. Nessessary for data structure.
{
for(var na=0,NAL=IndexOffSetForReturn.length;na<NAL;na++) //looping for the number of columns to place "#N/A" in to preserve data structure
{
if (NAL<=1) //checks to see if it's a single column return
{
var Sending = "#N/A";
twoDimensionalArray.push(Sending);
}
else if (NAL>1) //checks to see if it's a Multi column return
{
var Sending = "#N/A";
newArray.push(Sending);
}
}
if (NAL>1) //checks to see if it's a Multi column return
{
twoDimensionalArray.push(newArray);
}
}
}
}
if (CCL<=1) //checks to see if it's a single column return for running setValue
{
var singleArrayForm = [];
for (var l = 0,lL=twoDimensionalArray.length; l<lL; l++) //Builds 2d Looping-Array to allow choosing of columns at a future point
{
singleArrayForm.push([twoDimensionalArray[l]]);
}
if(!/return/i.test(SetSheetRange))
{
SpreadsheetApp.getActive().getSheetByName(Set_Sheet).getRange(RowVal,ColVal,singleArrayForm.length,singleArrayForm[0].length).setValues(singleArrayForm);
SpreadsheetApp.flush();
if(/y/i.test(Add_Note))
{
SpreadsheetApp.getActive().getSheetByName(Set_Sheet).getRange(RowVal,ColVal,1,1).setNote("VLookup Script Ran On: " + Utilities.formatDate(new Date(), "PST", "MM-dd-yyyy hh:mm a") + "\nRange: " + Ref_Sheet + "!" + Ref_Range);
}
}
else
{
return singleArrayForm
}
}
if (CCL>1) //checks to see if it's a multi column return for running setValues
{
if(!/return/i.test(SetSheetRange))
{
SpreadsheetApp.getActive().getSheetByName(Set_Sheet).getRange(RowVal,ColVal,twoDimensionalArray.length,twoDimensionalArray[0].length).setValues(twoDimensionalArray);
SpreadsheetApp.flush();
if(/y/i.test(Add_Note))
{
SpreadsheetApp.getActive().getSheetByName(Set_Sheet).getRange(RowVal,ColVal,1,1).setNote("VLookup Script Ran On: " + Utilities.formatDate(new Date(), "PST", "MM-dd-yyyy hh:mm a") + "\nRange: " + Ref_Sheet + "!" + Ref_Range);
}
}
else
{
return twoDimensionalArray
}
}
}
//~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`
//~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`
//--//Dependent on isEmpty_()
//Find Last Row on Database
function getFirstEmptyRowUsingArray_(sheetname)
{
var data = SpreadsheetApp.getActive().getSheetByName(sheetname).getDataRange().getValues();
for(var n = data.length ; n>0 ; n--)
{
if(isEmpty_(data[n])==false)
{
n++;
break;
}
}
n++;
return (n);
}
//~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`
The Following is a ImportRange script because I hate how =importrange() requires you to "request access" on every new formula. If that importrange is embedded you have to take it out and request access and re-embed it. Also a lot of times the formula just breaks. so:
//~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`
//Script Based ImportRange
//Example importRange_('0AodPsggrbsh1dDNH............','Main4NS','A:G','Common','C7','y')
//Explanation importRange_('Importing Spreadsheet Key or URL','Importing Spreadsheet Tab Name','Importing Spreadsheet Tab's Range','Destination Spreadsheet Tab Name','Destination Spreadsheet Tab's placement','Will add note to the first cell of import')
function importRange_(Source_Key,Source_Sheet,Source_Range,Set_Sheet,Set_Pos,Add_Note)
{
var SourceTypeCheck = Source_Key.indexOf("https://");
if(SourceTypeCheck >= 0)
{
var Load = SpreadsheetApp.openByUrl(Source_Key).getSheetByName(Source_Sheet).getRange(Source_Range).getValues();
var Name = SpreadsheetApp.openByUrl(Source_Key).getName();
}
if(SourceTypeCheck == -1)
{
var Load = SpreadsheetApp.openById(Source_Key).getSheetByName(Source_Sheet).getRange(Source_Range).getValues();
var Name = SpreadsheetApp.openById(Source_Key).getName();
}
var RowVal = SpreadsheetApp.getActive().getSheetByName(Set_Sheet).getRange(Set_Pos).getRow();
var ColVal = SpreadsheetApp.getActive().getSheetByName(Set_Sheet).getRange(Set_Pos).getColumn();
if(Add_Note.toUpperCase() == 'Y')
{
SpreadsheetApp.getActive().getSheetByName(Set_Sheet).getRange(RowVal,ColVal,1,1).setNote("Import Script Updated On: " + Utilities.formatDate(new Date(), "PST", "MM-dd-yyyy hh:mm a")+"\nSS Name: "+Name+"\nRange: "+Source_Sheet+"!"+Source_Range+"\nSS Key: "+ Source_Key);
}
SpreadsheetApp.getActive().getSheetByName(Set_Sheet).getRange(RowVal,ColVal,Load.length,Load[0].length).setValues(Load);
SpreadsheetApp.flush();
SpreadsheetApp.getActiveSpreadsheet().toast('At: '+Set_Sheet+'!'+Set_Pos,'Import Completed:');
}
//~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`~,~`
Same thing stands. If you have and ideas for improvement let me know. If you find a way to integrate it, cool beans, Post some code of how you used it.
:)

Formula for finding bold text and returning yes or no

As stated in the title.
Im working on a spreadsheet, optimising it for collecting (or rather to index a collection).
The spreadsheet looks like this: https://docs.google.com/spreadsheets/d/1SyKB6YSEHVXIl-aYAEXxtcJ3Spm92XPPsHHhRprEurM/edit#gid=0
What i need is a piece of code which automaticly sets the "owned" boxes to yes or no, depending on if any one of the cells, lef tside of said "owned"-box, under Title:, Appears in: or Season Collections: contains bold text. (see that way you can just locate the collectible you've bought and bold it. Yeah, i know i can just manually type in the yes's and no's. But i like trying to find solutions in code even though i know pretty much nothing on the subject, it's a challange).
I've been googlin' for a solution. Found some promesing stuff on this site. However, i can't get them darn lines of code to work.
function ifBold() {
var sheet = SpreadsheetApp.getActive().getSheetByName('Bold');
var cells = sheet.getRange('A2:A');
for (var i=1; i <= cells.getNumRows(); i++) {
var isBold = false;
if(cells.getCell(i, 1).getFontWeight() == 'bold')
isBold = true;
sheet.getRange(i+1, 2).setValue(isBold);
}
}
What say ya'? Help a clueless novice out?
I guess the code above only applies to numbers?
This one might be more usefull. Still can't get it to work though.
function ifBold(rangeSpecification) {
var sheet = SpreadsheetApp.getActive().getSheetByName('Bold');
var cells = sheet.getRange('rangeSpecification');
for (var i=1; i <= cells.getNumRows(); i++) {
var isBold = false;
if(cells.getCell(i, 1).getFontWeight() == 'bold')
isBold = true;
sheet.getRange(i+1, 2).setValue(isBold);
}
}

=ifBold(A1:C1) will not work since it is grabbing the values as an array and not the range notation.
You will need to change it to =ifBold("A1:C1") for it to work.
Also, I have some edits to make this work better for you:
function ifBold(rangeSpecification) {
var sheet = SpreadsheetApp.getActiveSpreadsheet().getActiveSheet();
var range = sheet.getRange(rangeSpecification);
var weights = range.getFontWeights();
for (var i in weights[0]) {
var isBold = false;
if(weights[0][i].toString() == "bold"){
isBold = true;
return isBold;
}
}
return isBold;
}

Resources