I have a project under which there are 50+ formal modules in IBM DOORS,
I want to create a single view for all modules ( As default view )
This view should display all the attributes that are available for that particular module when I open it.
And the number of attributes in some modules vary.
If anyone in stack-overflow knows a way on this, It would be really helpful!
Before anything, you should probably be aware that there is a maximum number of attributes that can be loaded into a view. You can check out this thread for more information regarding max columns:
https://www.ibm.com/developerworks/community/forums/html/topic?id=1861480b-7aa0-43b2-bf77-be677f5f778e
Now as for how to do this. If you're looking for an automated solution using DXL here's some sample code that you can modify for your purposes. The current code will add object-level attributes that aren't system attributes to the current view of the module you run this code from.
AttrDef ad
Module m = current Module
string sAttrName
int count = 0
Column col
for col in m do {count++}
for ad in m do
{
if ((ad.object) && (!ad.system))
{
sAttrName = ad.name
col = insert (column count)
attribute(col, sAttrName)
width(col, 200)
count++
}
}
Note: This code will only generate a view with all attributes in the module it is run from, it will not loop through all modules in a project or save the view.
To loop through a project and get all modules you'll need to create a recursive function using for itemRef in folder do {...}. Something like the following:
Folder f = current Folder
void recurseFolder(Folder f)
{
Item iRef
for iRef in f do
{
if (type(iRef) == "Formal")
(call your create views function here with parameter iRef)
else if (type(iRef) == "Folder" || type(iRef) == "Project")
recurseFolder(folder(iRef))
}
}
recurseFolder(f)
And then if you need additional code to save the view, you'll have to add appropriate code for that too using save(View v). You can look up additional information pertaining to setting view preferences and saving them in the DXL Reference Manual.
Related
I'm trying to take a set of names with check boxes next to them and make a system so that you can check some of the names (mark them as "True") and click a button. It would then increment +1 the value next to the names of the people marked true.
Here is a link to a sample sheet:
https://docs.google.com/spreadsheets/d/1gf-BrXXR0cAYCn7bMkvvK65R290NXbP9D6aA68c06C8/edit?usp=sharing
If column A, row 2 (Tim's row) is marked true, I want to increment the value in column C, row 2 by one, so Tim would have a running total of tardies next to his name.
I hope this is do-able. Thanks!
(Now I know what you're trying to get)
In order to increment a value via the press of a button, as far as I know you have to use scripts (Tools -> Script Editor). Here's something I threw together:
// editCell takes the cell to edit and it's new value
function editCell(cellName, value) {
SpreadsheetApp.getActiveSheet().getRange(cellName).setValue(value);
}
// getCell takes the cell's value and returns it
function getCell(cellName) {
return SpreadsheetApp.getActiveSheet().getRange(cellName).getValue();
}
// plusOne adds one to the field supplied. It's linked to the button in the sheet
function plusOne() {
editCell("C2",getCell("C2")+1);
}
In order to make it work, you may need to change the targeted Cell (currently C2). You'll also need to create a drawing (Insert -> Drawing) which will act as the button you'll be able to press. Once inserted, click on the three dots on it and click on Link Script. Type in plusOne. When executing it the first time, it'll ask you to authenticate the use of scripts.
That should do the trick. I hope you have some understanding of Java Script though (to modify the code to your needs optimally).
Edit - Expandable version
So, to make every number behind a ticked field increase by one, you can use this version of the code:
// Adds one to every field within "AddArea" that has a tick in front of it. It's linked to the button in the sheet.
function plusOne() {
var ss = SpreadsheetApp.getActiveSheet();
var range = ss.getRange("AddArea");
var values = range.getValues();
var newValues = [];
for (var i = 0; i < range.getNumRows(); ++i) {
var row = values[i];
if(row[0]) {
newValues.push([true, row[1]+1]);
}
else {
newValues.push([false, row[1]]);
}
}
range.setValues(newValues);
}
You need to define a custom named area, named "AddArea" (Data -> Labeled Areas [or similar]), link the script to a button and allow the script to be run. This was hard but very fun to figure out.
Example Sheet for reference (updated)
Can be achieved with just, for example for C2:
=A2+C2
but you would need to turn on iterative calculation (File > Spreadsheet settings... > Calculation [Max. 1 is adequate]) and I would not really recommend that over a trigger with Google Apps Script.
I used dxl code to retrieve all outlinks and it works ok .
But it seems it retrieve just some links and neglect others , and i don't know why !
here is code snippet
Object o
string label
Module m = read(planSpecReportPath_inDoors)
Link outLink
for o in m do
{
for outLink in o -> "*" do
{
parentModName = target(outLink)
iTarget= targetAbsNo(outLink)
can any one tell me what is general solution to get all outlinks ? and what is i am missing ?
thanks
first of all, for clarity's sake I though I should mention that your comment says your script gets all outlinks to current modules, but the script you posted will only retrieve outlinks from the module at path planSpecReportPath_inDoors. You can change the script to work for the current module by modifying your code to the following:
Module m = current Module
Secondly, if I understand your question and comment correctly, you want to cycle through each outlink in a module, including the outlinks from previous baselines right? this can be done with a fairly simple script:
Module baselineM = null
Module m = read(planSpecReportPath_inDoors)
Object o = null
Link outLink = null
Baseline b = null
for b in all m do
{
// Load the current baseline and display it
baselineM = load(m, b, true)
for o in entire(m) do
{
for outLink in o -> "*" do
{
parentModName = target(outLink)
iTarget= targetAbsNo(outLink)
// Whatever else you want to do with each link
}
}
}
Basically, you would need to cycle through each baseline individually, then cycle through all of the objects in that baseline, then cycle through each link. I hope that answers your question!
I'm working on a VTiger 6.4.0 Extension Module that is used to get company data when entering a company name in the Accounts module.
The module is almost finished, i retrieve data from a API and enter them in the input fields using JQuery.
But the problem is that i have some data that is not relative to the existing fields in the account information, so i'm trying to create some new custom fields.
Only i can't seem to figure out how to create a custom field for the Accounts module from within my Extension module.
I googled around and watched some posts on stackoverflow.
I came up with the following part of code, but this doesn't seem to work.
public function addKvkfield(){
$module = new Vtiger_Module();
$module->name = 'Accounts';
$module = $module->getInstance('Accounts');
$blockInstance = new Vtiger_Block();
$blockInstance->label = 'LBL_ACCOUNT_INFORMATION';
$blockInstance = $blockInstance->getInstance($blockInstance->label,$module);
$fieldInstance = new Vtiger_Field();
$fieldInstance->name = 'KvKNummer';
$fieldInstance->table = $module->basetable;
$fieldInstance->column = 'kvknummer';
$fieldInstance->columntype = 'VARCHAR(100)';
$fieldInstance->uitype = 2;
$fieldInstance->typeofdata = 'V~M';
$blockInstance->addField($fieldInstance);
}
The addKvkfield function is being called in the vtlib_handler module.postinstall (Couldn't find any information if this is the right way of doing this within a Extenstion Module)
vtlibhandler:
function vtlib_handler($modulename, $event_type) {
global $log;
if($event_type == 'module.postinstall') {
$this->addJSLinks();
$this->createConfigTable();
$this->addSettingsMenu();
$this->addKvkfield();
$this->updateLabels();
// TODO Handle post installation actions
} else if($event_type == 'module.disabled') {
// TODO Handle actions when this module is disabled.
} else if($event_type == 'module.enabled') {
// TODO Handle actions when this module is enabled.
} else if($event_type == 'module.preuninstall') {
// TODO Handle actions when this module is about to be deleted.
} else if($event_type == 'module.preupdate') {
// TODO Handle actions before this module is updated.
} else if($event_type == 'module.postupdate') {
$this->updateLabels();
// TODO Handle actions after this module is updated.
}
}
Hopefully someone can give me a push in the right direction.
Thanks in advance :)
I managed to succeed in creating the custom fields that i needed in the Accounts Module.
Thanks to the Vtiger Mailing List! :)
What did the trick was a small alteration of the code I've written:
public function addKvkfield(){
$module = Vtiger_Module::getInstance('Accounts');
$blockInstance = Vtiger_Block::getInstance('LBL_ACCOUNT_INFORMATION', $module);
$fieldInstance = new Vtiger_Field();
$fieldInstance->label = 'KvKNummer';
$fieldInstance->name = 'kvknummer';
$fieldInstance->column = $fieldInstance->name; // Good idea to keep name and columnname the same
$fieldInstance->columntype = 'VARCHAR(100)';
$fieldInstance->uitype = 1; // No need to use 2 anymore. Setting "M" below will introduce the Red asterisk
$fieldInstance->typeofdata = 'V~O';
$blockInstance->addField($fieldInstance);
}
The above code will create a (optional)Custom Field in the Account module.
If your writing a new module and never installed this module before you can just call the function in the vtlib_handler as i did in my question.
But in my case this did not work because I've already installed the plugin before adding the code to create the customfields.
So what i needed to do is call the function above on the vtlib_handler module.postupdate (this will add the custom field on a module update)
Only problem with this is that it'll get run every time the extenstion is updated.
So i suggest creating a if statement in the function to check if the field already exists in the vtiger_field dbtable if not run the script.
Hopefully i saved someone else some time by writing this all down :P
Goodluck!
Please refer below link
Add New Field in existing Module
Copy code from My Answer and create a new PHP file with ay name. Place that in CRM's root directory and Run into browser. Your Field will be added into your Module. You have to make sure about the parameters you set in code which you copy.
i choose to ask a question here well aware that i can infringe some rules of StackExchange maybe becouse this isn't the right place to ask that, but i saw a lot of question related to CERN ROOT. I know that here people that answer the questions prefer to show the way instead to give a cooked solution, but i need some help and i have no time to learn from the answers, i only want a solution for my problem. I apologize in advance!
Here is my problem: i have two .root files:
one of a spectrum ("sezione_misura_90.root"),
one from background ("sezione_fondo_90.root").
I have to subtract the second from the first and get a final histogram. Usually i open the file with the TBroswer and i have no idea how to implement a macro of a script to open a .root file or doing everything else, first of all becouse i hate ROOT and all programming related, and i have only a course where i am supposed to use that, without someone tell me how!!! Even the prof. don't know how to use...
If some one that read have a macro or a script ready to use, I will be forever indebted to him for sharing that with me. Thanks in advance!
EDIT
I write down a file named run.cxx with the following lines
int run()
{
// Open both files side-by-side
TFile* sezione_misura_90 = new TFile("sezione_misura_90.root");
TFile* sezione_fondo_90 = new TFile("sezione_fondo_90.root");
// Get the histograms from the file
// Since you didn't say from your post, I'm going to assume that
// the histograms are called "hist" and that they hold floating
// point values (meaning, they're TH1F histograms. The "F" means float)
TH1F* h_misura = (TH1F*) sezione_misura_90->Get("hist");
TH1F* h_fondo = (TH1F*) sezione_fondo_90->Get("hist");
// Now we add them together
TH1F* h_sum = h_misura->Add(*h_fondo, -1);
}
There was some typos like ( and ;, i correct them but i get back the following.
Error: illegal pointer to class object h_misura 0x0 139 run.cxx:21:
** Interpreter error recovered **
A simple way to accomplish this is to write a script that opens the two files, reads the histograms from the files, and subtracts them (which is the same as adding them using a factor of -1). This can be done using a block of code similar to the following:
{
// Open both files side-by-side
TFile* sezione_misura_90 = new TFile("sezione_misura_90.root");
TFile* sezione_fondo_90 = new TFile(("sezione_fondo_90.root");
// Get the histograms from the file
// Since you didn't say from your post, I'm going to assume that
// the histograms are called "hist" and that they hold floating
// point values (meaning, they're TH1F histograms. The "F" means float)
TH1F* h_misura = (TH1F*) sezione_misura_90->Get("hist");
TH1F* h_fondo = (TH1F*) sezione_fondo_90->Get("hist");
// Now we add them together
TH1F* h_sum = h_misura->Add(*h_fondo, -1);
}
At this point, h_sum should be the histogram you want. You can save it to a file for later reading, or you can draw it to the screen if you're running an interactive root session.
The above code can be run by doing one of the following:
An interactive root session just by typing root and then typing the above lines)
As a root script (by pasting them into a file which, for example, could be named "file.C" and typing "root file.C")
A larger program (by putting the above lines in a function and calling that function)
You can read more about the methods available for a Histogram in ROOT's documentation:
http://root.cern.ch/root/html/TH1.html#TH1:Add#1
Hope that helps.
I see at least two problems. One problem has to do with the way ROOT manages memory, more specifically ROOT objects in memory:
// Each ROOT object derives from a TNamed class,
// hence has a <name>, which ROOT uses internally
// to keep track of the objects
TH1F* h_misura = (TH1F*) sezione_misura_90->Get("hist");
// now you have a histogram named "hist" in memory;
//btw, better to name it something more unique, e.g. hist1, at least
TH1F* h_fondo = (TH1F*) sezione_fondo_90->Get("hist");
// And now, you are trying to get another histogram named "hist",
// which creates a problem: Two different histograms with the same
// name - you can't do that.
// At the very least ROOT is going to overwrite the first hist
// and replace it with the second, or bug out
Solution to problem one:
// Rename the "hist"s to something like "hist1" and "hist2"
TH1F* h_misura = (TH1F*) sezione_misura_90->Get("hist");
h_misura->SetName("hist1");
TH1F* h_fondo = (TH1F*) sezione_fondo_90->Get("hist");
h_fondo->SetName("hist2");
// now, you have to histograms in memory with unique names
Problem two: when you open a TFile with
// TFile * f = new TFile("file.root");
it opens it in a read-only mode, therefore you can't write to them if you want to save your sum of histograms. Instead do this:
TFile * f = TFile::Open("file.root", "write");
// and do a null pointer check
if (!f) { std::cout << "file not found" << std::endl; exit(1); }
// if you want to save the results to file f
// ...
f->cd();
hist->Write();
f->Close();
I want to get custom S.O. Invoice Template fields using QuickBooks QBFC.
Here's how to read custom fields from a sales order:
Add "0" to the OwnerIDList of the SalesOrderQuery.
Read custom header fields from the DataExtRetList that is attached to SalesOrderRet objects that are returned from the query.
Read custom line item fields from the DataExtRetList in the SalesOrderLineRet and SalesOrderLineGrouptRet objects that are included in each SalesOrderRet (if you're reading line items).
If you're already using the IncludeRetElementList, you must add DataExtRet to the list; if you're not then don't start using IncludeRetElementList until you have custom fields working. Just like any transaction query, you won't see any line item data unless you set the IncludeLineItems flag in the request.
Custom fields are well documented in the QuickBooks SDK Manual. I'd recommend you take a look at the section DataExt: Using Custom Fields and Private Data in the QBSDK Programmers Guide.
To elaborate on Paul Keister's answer, the reason you must add "0" to the query is because that is the Owner ID of the custom field you are attempting to retrieve. 0 is probably likely to be the value, but if the owner ID is different, you will have to use a different value here.
Some example C# code:
//set the owner id of the custom field you are trying to get back
IInvoiceQuery invoiceQuery = requestMsgSet.AppendInvoiceQueryRq();
invoiceQuery.OwnerIDList.Add("0");
//set up query parameters and actually call your query...
//call this method for each invoice to get its custom fields (if they exist)
static void GetInvoiceCustomFields(IInvoiceRet invoice)
{
if (invoice.DataExtRetList == null)
{
return;
}
for (int i = 0; i < invoice.DataExtRetList.Count; i++)
{
IDataExtRet extData = invoice.DataExtRetList.GetAt(i);
Console.WriteLine("external data name: " + extData.DataExtName.GetValue());
Console.WriteLine("external data value: " + extData.DataExtValue.GetValue());
}
}