I am unable to get a scrollview to scroll if I use a view in the scroll view. I followed the example https://useyourloaf.com/blog/scroll-view-layouts-with-interface-builder/ , which used a stacked view in a scroll view. When I follow this example and use a stack view, it works. My UI requires a view because of the layout I need for the controls.
I have a sample project at: https://github.com/eloew/ScrollViewTest which illustrates the problem. I have used the storyboard so no code to post here.
Is it possible to use a view in a scrollview?
#eloew You are almost done. You just need to adjust few things.
Your view width have to equal with scrollView width.
Put the height and bottom constant of Second textField/Label.
Done
The procedure you are using is correct but it is sometimes tricky to setup constraints. Your view needs to have either implicit or explicit width and height. Then it needs to be inserted into scroll view and have all 4 border constraints setup.
Looking at your project you have missed a few constraints. To debug a view like that it is easiest to first set it up outside the scroll view. Take your view outside it and setup leading and top constraints to it's superview. Now modify your constraints until you see a desired result.
For your specific case I used:
View width equals to superview width
First label leading and top are pinned to superview leading and top
First text field leading to First label trailing
First text field trailing to Superview trailing
First text field center vertically to First label
Outlet label leading to Superview
Outlet label trailing to Superview
Outlet label top to First label bottom
Second label leading to Superview leading
Second label top to Outlet label bottom
Second text field leading to Second label trailing
Second text field trailing to Superview trailing
Second text field center vertically to Second label
Second label bottom to Superview bottom
After all these are set I have a nicely layout view without a scroll view. There should be no errors visible.
Now add a scroll view. Pin it to leading, trailing, top and bottom. Then drag your view inside your scroll view and this view to scrollview leading, trailing, top and bottom and set equal width between your view and your scrollview. That should be it.
Short answer is yes it is possible. Simply add a view as a subview in your scroll view and set its constraints.
Apple's documentation
It is simple enough task, you can even find examples here on SO.
Related
I am a little stuck with the ScrollView in Swift and Xcode 11.
My goal is a simple ScrollView with Labels and Textfields. Each label describes what the textfields are used for. For example there is a Label "Name", so you have to enter your name in the textfield under the label. For this I need a ScrollView because the App I am coding requires a few more information. When I am trying to put this in a ScrollView I am constantly getting the following error:
"Scrollable content size is ambiguous to ScrollView".
In order to find help I searched the internet and for example found this question: UIScrollView Scrollable Content Size Ambiguity.
Unfortunatly it didn't solve my problem. So I decided to create a small test project with the following:
- I created a project as a Single View Application
- I added a ScrollView to the ViewController
- I clicked on the constrains-Button at the canvas
- I selected 0,0,0,0 for leading/top/trailing/bottom.
- I clicked on "add 4 Constrains
- Now the warning appeared. Also the ScrollView was not resized to the ViewController... I don't know why.
- I added a UIView inside the ScrollView and set the same constrains, this time according to the ScrollView.
- The UIView (Content view) got an extra constrain: Equal width with the root view
- Now I added two Buttons, one with the text "Hello" and the other one with "world" on it.
- The "hello"-Button received the following constrains: 16 to leading, trailing and top, as well as a fixed height of 30.
- The "world"-Button got the following constrains: 16 to bottom, leading, trailing and over a 1000 so you can scroll through the ScrollView.
After all these steps the error is still there and if I run the app the "hello"-Button is at the top of the screen and the "world"-Button is at the bottom and I can't scroll.
Can maybe anyone help me fixing this issue. I am looking forward to every answer! Thank you for your help in advance!
Here is the trick that worked for me:
Add a ScrollView to your wished ViewController.
Select it in the Outline and open its size inspector.
Uncheck there the option "Content Layout Guides".
Now set leading/top/trailing and bottom constrains to 0 of the ScrollView.
Add in a UIView and constrain its leading/top/trailing and bottom also to 0.
Add an equal width constrain to the UIView. (The width needs to be equal the width of the view from the ViewController, with this way you are disabeling horizontal scrolling).
The warning will disappear if every element inside the UIView is chained vertically. This means, that the top element has a constrain to the top of the view and to the element under it and so on. The last element needs a constrain to the bottom of the view.
If you followed this steps you should be fine with ScrollViews. This way you also can add as many content as you want to the bottom and the ScrollView will extend dynamically.
I hope I explained it well enough.
It sounds like you're on the right track, and really close.
The first part is absolutely right - you add your ScrollView and pin it to zero for the top, trailing, bottom, and leading constraints. That makes it take up your whole screen.
Then you drop a plain old UIView into the ScrollView, and pin its top, trailing, bottom, and leading constraints to the ScrollView (all as zero again). Then you set the UIView to have an equal width to the ScrollView. The last thing is to set the UIView's height as equal to the ScrollView's height, but you change one thing: you set the priority of this constraint to be low (250). That's basically what allows the UIView to exceed the size of the ScrollView, so you can then scroll.
All you do then is add your buttons, etc inside the UIView, so you place them in relation to it rather than the ScrollView, and pin or align them as you wish.
Add a total of 9 constraints
1 - 4: ScrollView to Superview (leading, top, trailing & bottom)
5 - 8: Content view to Content Layout guide (leading, top, trailing & bottom)
9: Content view Width equals width to Frame Layout Guide.
But when you do this (right-click drag and drop) 7 & 8 constrains (trailing & bottom constrains to Content Layout guide) will have constant values. (check image below).
Just make them zero. Now it worked.
In my storyboard, I have a parent UIScrollView in which I have a UIView of height about 2000px.
I have designed the whole view & placed an another UIView at bottom of parent scroll view so that it will be fixed in the UI. But at the specific point, I need to place that UIView(i.e.fixed) to get scrolled. Like after I scroll a UILabel, I want to scroll that UIView below that & get disappeared from the bottom.
I know its hard to explain but I am stuck at it for so long.
P.S. I'm using AutoLayout.
In this case it is probably best to have the view outside the scroll view but connect constraints to the inner view as well. You use priorities to control those constraints.
In your case you would decrease your bottom constraint priority (to 500 for instance). And you would add a constraint like outsideView.top <= insideView.bottom. So connect the outside view to one of the views inside the scroll view and create the relation be smaller (or greater if the 2 items are reversed) or equal to that view point.
To create a demo of this start a new project and open Main.storyboard:
Add a scroll view with constraints to leading, trailing, top, bottom
Add a blank UIView (now called innerView) inside the scroll view and add leading, trailing, top, bottom constraints
Add a height constraint to innerView to 2000
Add an equal width constraint between innerView and your scroll view
Set bottom constraint between innerView and scroll view to 100
Set a distinct color to innerView to see the effect
All other constraints should be set to 0
Add another UIView on the top level (now called outerView)
Pin outer view to leading, trailing and bottom. Also add a height constraint to 50
Set a distinct color to outerView to see the effect.
By now you should have a scrollable scroll view and a fixed view at the bottom if you run the app.
Now connect outerView with innerView and select "vertical spacing"
Double click the newly created constraint and modify it:
(If needed) Reverse first and second item so that the outer view is first item
Change relation to "less then or equal"
(If needed) select outerView.top
(If needed) select innerView.bottom
Set constant to zero
Select outerView and find bottom constraint to safe area (or superview) and set its priority to 500.
Now run the app. If all is correct your fixed view will be fixed until you scroll down far enough. After 2000px is visible the fixed view will be scrolling with scroll view.
You can naturally pin it to any view in scroll view to get any possible effect you need.
I hope this is descriptive enough. Good luck.
I am trying to layout my detail screen in IB with a tab bar and nav bar. However, there are three issues with the display when the simulator runs:
There is a gap at the top of the screen,
The dynamic label content extends past their container views at the bottom
The scrollbar doesn't reach to the bottom of the content.
Screenshot of simulator displaying the issues described
My question is how should I set my constraints so that the above issues are resolved?
I have a lot of constraints and I'm not sure where I'm going wrong or what would be the best way to present the steps I've taken so far. But here is a screenshot of my constraints and here is a summary of the constraints/steps I've taken so far:
Main view contains just one child: The Scroll View. Scroll view is pinned to top, leading, trailing of main view and bottom is pinned to the Bottom Layout Guide.top,
Scroll view has just 1 child subview ("Content View"). Content View is pinned to top + 64, leading, trailing, bottoms to Super View, and it has equal heights and widths to the Main view.
The content view has an image, Recipe Title subview, and Shadow Background subview. The Shadow Background subview contains another subview with some labels of dynamic height. I have constraints to pin the leading and trailing sides of these containers to the superview. And I have top, bottom, leading, trailing constraints to pin these subviews to the superview and/or eachother so that there is a chain from top to bottom.
The Shadow Background View contains the labels of dynamic height. The labels also have pin constraints of top, leading, trailing and bottom with the exception of the last label which does not have the bottom constraint.
I do not have any code that updates the layout-- everything so far is in the IB.
Any help is GREATLY appreciated!
Hallelujah! After spending a full frustrating week, I've finally found the magical formula in IB for laying out a scroll view + navbar + tab bar + dynamic label height.
My original problems were caused by the following mistakes:
Adjust Scroll View Insets should have been set to false
Content View Top and Bottom pins were incorrect
Missing some heights on some of the subviews
Last subview wasn't pinned correctly on the bottom
Maybe not all these steps are required and maybe this isn't the most perfect solution, but this is what worked for me. Here is a diagram of the solution for those that prefer pictures.
Main View -> Attributes Inspector -> Uncheck the Adjust Scroll View Insets checkbox.
Add Scroll View. This is the only child of the Main View. Pin Top, Leading, Trailing Space to the Main View. Pin the Bottom to the Bottom Layout Guide.
Add one subview (name it "Content View"). This is the only child of the Scroll View. Pin Top, Leading, Trailing Space to Scroll View. Pin Bottom to Scroll view with a constant of -49 to account for the tab bar. Also set its Height and Width to be equal to the Main View.
Add a child subview to the Content View. Top is pinned to Superview with a constant of 62 to account for the Nav Bar. Leading and Trailing is pinned to the Superview. The view also needs a Height-- give it either a fixed value or a minimum value if it is dynamic content (ex: Height >- 20). You may also need to give the Height constraints a lower priority such as 250.
Continue adding sibling subviews as needed. Pin the tops to the previous sibling subview. Pin the Leading and Trailing to the Superview. The last sibling subview should be pinned to the Superview. Each subview needs a height. There needs to be one continuous chain of constraints (Top & Bottom pins, Height) from the top subview through to the bottom in order to avoid that "Scroll View has ambiguous scrollable content height" warning and have the scroll work correctly.
Do a happy dance.
Hope this helps someone else.
Make the content view's top constraint have a constant of 0, not 64. For the label extending beyond the bottom of the container view, you'll have to post more information about the layout for us to help.
I've been trying to create a UIScrollView for user registry but with no success. I'm using auto layout and all of the fields that go inside the scroll view are static. Because of the usual ambiguous height issue, I've added a UIView inside the scroll view, set the constraints to the margins of the scroll view and centered aligned it. After that I added all of the fields inside that Content View, in the storyboard.
The content fields have their constraints setup as you would expect, but when I get to the lowest field and set the bottom constraint to the bottom of the Content View then everything breaks.
I'm asked by Xcode to set the priority of some views, and when I do as is says, the Content View size stays the same and the views are shrunken.
I tried not to put the last bottom constraint and resize the Content View by code but the height is not resized as is should.
I'm looking for a good solution to do this in storyboards and auto layout.
Update: I added a bottom constraint with a low priority, but the content scroll view is not expanding to show all of the fields.
Add&Set ScrollView(UIScrollView)
Add&Set ContentView(UIView) with subviews
! Set ContentView Width equal to View Width
Set all subviews constraints
View1 should be tied to the top of the ContentView
View4 should be tied to the bottom of the ContentView
All SubView (View1, View2, View3, View4 ...) must have a height and distance between each other
P.s. In your case, if iOS > 9.0 you can replace ContentView with UIStackView
You are using auto layout so the size of the content view is determined by constraints. Follow the below steps to provide proper constraints:
Drag the Scroll View inside main view and provide constraints Top, Bottom, Leading and Trailing in align with Super View (Main View) as
per screenshot.
Take View which will contain your content and drag inside Scroll View. and provide the constraints Center X, Center Y, Top, Bottom,
Leading and Trailing in align with Scroll View as per screenshot
Put all the element inside content view which is a subview of scroll view and provide Top constraint relative to the element above
it, to make equal space between the elements (eg. label, button etc.)
(Make sure you provide required constraint for X-position)
Last element is "Register Account" button make sure you provide the Top Constraint relative to country and Bottom constraint relative to
superview (content view) and change the priority for Top or Bottom
constraint as per screenshot, otherwise it gives error.
I'm trying to build UI similar to that of ios photo gallery : Navigation view controller with a scrollview occupying 80% height and 100% width of the parent's view and the collection view controller occupying the rest of the height and 100% width. So here's how it looks like :
The blue area is scrollview and its content view. The bottom part is a collection view which suppose to behave like a carousel. You can see the constraints that I have set in the following screenshot :
:
I want to set the scrollview height so that it only occupies 80% of the parent view estate and the collection view occupies the rest. However, I can't seem to resolve scrollview constraint issues such as autolayout not able to resolve height/y position of scrollview. As you can see in the above pic, I tried setting the height of the scrollview to 50% of the parent view but the autolayout still complains about not being able to resolve height. If I let interface builder resolve the issue, it just adds spacing to the content view inside scrollview and pushes it down as a result. You can see that in the following screenshots.
Your view heirarchy is correctly setup so thats quite nice and you are on the right track of what constraints to add. I'm going to write all the constraints starting from step 1.
To your UIScrollView add a top, leading and trailing constraint to the superView. Also add a equal height constraint between your UIScrollView and the superView and set the multiplier to 0.8.
Now add your UICollectionView below the UIScrollView and give it a leading, trailing and bottom to the superView. Also add a vertical spacing between the UICollectionView and UIScrollView.
Now add for the contentView inside the UIScrollView. Add a leading, top, bottom and trailing for the contentView to UIScrollView. As soon as you do this, the constraints will break and Xcode will complain. Now what you need to do more is add a equal height and width constraint between the UIScrollView and contentView. Set the priority of this equal height constraint (assuming you want vertical scroll) to something like 250, so that it breaks when the content inside the UIScrollView becomes too large to be displayed completely.
Now as far as that extra spacing issue is concerned. What you need to do is, select the UIViewController that has your UIScrollVIew and then select the attributes inspector for this UIViewController and uncheck the adjust scroll view insets option. For a screenshot, check this.
As i see from above do the following.
Add leading, trailing and top constraint to scrollview.
Add height constraint i.e drag from scrollview to superview and add equal width, in equal width constraint change the multiple factor to 0.8.
Add leading trailing, bottom constraint to collection view with respect to superview and vertical space constraint with respect to scrollview.