I would like to have a view with an animation that is only visible conditionally. When I do this I get unpredictable behavior. In particular, in the following cases I would expect calling a forever repeating animation inside onAppear to always work regardless of where or when it initializes, but in reality it behaves erratically. How should I make sense of this behavior? How should I be animating a value inside a view that conditionally appears?
Case 1: When the example starts, there is no circle (as expected), when the button is clicked the circle then starts as animating (as expected), if clicked off then the label keeps animating (which it shouldn't as the animated value is behind a false if statement), if clicked back on again then the circle is stuck at full size and while the label keeps animating
struct TestButton: View {
#State var radius = 50.0
#State var running = false
let animation = Animation.linear(duration: 1).repeatForever(autoreverses: false)
var body: some View {
VStack {
Button(running ? "Stop" : "Start") {
running.toggle()
}
if running {
Circle()
.fill(.blue)
.frame(width: radius * 2, height: radius * 2)
.onAppear {
withAnimation(animation) {
self.radius = 100
}
}
}
}
}
}
Case 2: No animation shows up regardless of how many times you click the button.
struct TestButton: View {
#State var radius = 50.0
#State var running = false
let animation = Animation.linear(duration: 1).repeatForever(autoreverses: false)
var body: some View {
VStack {
Button(running ? "Stop" : "Start") {
running.toggle()
}
if running {
Circle()
.fill(.blue.opacity(0.2))
.frame(width: radius * 2, height: radius * 2)
}
}
// `onAppear` moved from `Circle` to `VStack`.
.onAppear {
withAnimation(animation) {
self.radius = 100
}
}
}
}
Case 3: The animation runs just like after the first button click in Case 1.
struct TestButton: View {
#State var radius = 50.0
#State var running = true // This now starts as `true`
let animation = Animation.linear(duration: 1).repeatForever(autoreverses: false)
var body: some View {
VStack {
Button(running ? "Stop" : "Start") {
running.toggle()
}
if running {
Circle()
.fill(.blue.opacity(0.2))
.frame(width: radius * 2, height: radius * 2)
}
}
.onAppear {
withAnimation(animation) {
self.radius = 100
}
}
}
}
It is better to join animation with value which you want to animate, in your case it is radius, explicitly on container which holds animatable view.
Here is demo of approach. Tested with Xcode 13.2 / iOS 15.2
struct TestButton: View {
#State var radius = 50.0
#State var running = false
let animation = Animation.linear(duration: 1).repeatForever(autoreverses: false)
var body: some View {
VStack {
Button(running ? "Stop" : "Start") {
running.toggle()
}
VStack { // responsible for animation of
// conditionally appeared/disappeared view
if running {
Circle()
.fill(.blue)
.frame(width: radius * 2, height: radius * 2)
.onAppear {
self.radius = 100
}
.onDisappear {
self.radius = 50
}
}
}
.animation(animation, value: radius) // << here !!
}
}
}
I have an image on a view.
added rotation to rotate the view
added drag gesture to pan the image
drag gesture works fine when image is not rotated
once the view is rotated to certain angle the drag gesture gets disturbed, since view is rotated.
So, how to adjust the dragOffset and position based on the angle of rotation?
Code:
struct ImageView: View {
#State private var dragOffset: CGSize = .zero
#State private var position: CGSize = .zero
#State private var currentRotation: Angle = .zero
#GestureState private var twistAngle: Angle = .zero
public var body: some View {
let rotationGesture = RotationGesture(minimumAngleDelta: .degrees(10))
.updating($twistAngle, body: { (value, state, _) in
state = value
})
.onEnded{ self.currentRotation += $0 }
let dragGesture = DragGesture()
.onChanged({ (value) in
self.dragOffset = value.translation
})
.onEnded({ (value) in
self.position.width += value.translation.width
self.position.height += value.translation.height
self.dragOffset = .zero
})
let gestures = rotationGesture
.simultaneously(with: dragGesture)
Image.placeholder320x192
.offset(x: dragOffset.width + position.width, y: dragOffset.height + position.height)
.rotationEffect(currentRotation + twistAngle)
.gesture(gestures, including: .gesture)
}
}
The order of the modifiers matter. You currently have the offset before the rotation - therefore you are applying the offset then rotating. This makes the offset appear at an angle. Instead, you want to rotate and then offset.
Change:
Image.placeholder320x192
.offset(x: dragOffset.width + position.width, y: dragOffset.height + position.height)
.rotationEffect(currentRotation + twistAngle)
.gesture(gestures, including: .gesture)
To this:
Image.placeholder320x192
.rotationEffect(currentRotation + twistAngle)
.offset(x: dragOffset.width + position.width, y: dragOffset.height + position.height)
.gesture(gestures, including: .gesture)
How would I add draggable separator lines between Views or UIViews using purely SwiftUI. Is it even possible with SwiftUI, or would I have to fall back on UIKit?
Example screens with separators:
I can't find this kind of stuff in the SwiftUI documentation. Even just enough info to do the top-left two-pane example would be useful.
(Similar questions have been asked here and here , but these are 5 and 7 years old, and deal with Objective-C / UIKit, not Swift / SwiftUI)
Here is a sample that allows horizontal and vertical resizing using grips. Dragging the purple grip resizes horizontally and the orange grip vertically. Both vertical and horizontal sizes are bounded by device resolution. The red pane is always visible, but the grips and other panes can be hidden using a toggle. There is also a reset button to restore, it is only visible when the original state changes. There are other tidbits that are useful and commented inline.
// Resizable panes, red is always visible
struct PanesView: View {
static let startWidth = UIScreen.main.bounds.size.width / 6
static let startHeight = UIScreen.main.bounds.size.height / 5
// update drag width when the purple grip is dragged
#State private var dragWidth : CGFloat = startWidth
// update drag height when the orange grip is dragged
#State private var dragHeight : CGFloat = startHeight
// remember show/hide green and blue panes
#AppStorage("show") var show : Bool = true
// keeps the panes a reasonable size based on device resolution
var minWidth : CGFloat = UIScreen.main.bounds.size.width / 6
let minHeight : CGFloat = UIScreen.main.bounds.size.height / 5
// purple and orange grips are this thick
let thickness : CGFloat = 9
// computed property that shows resize when appropriate
var showResize : Bool {
dragWidth != PanesView.startWidth || dragHeight != PanesView.startHeight
}
// use computed properties to keep the body tidy
var body: some View {
HStack(spacing: 0) {
redPane
// why two show-ifs? the animated one chases the non-animated and adds visual interest
if show {
purpleGrip
}
if show { withAnimation {
VStack(spacing: 0) {
greenPane
orangeGrip
Color.blue.frame(height: dragHeight) // blue pane
}
.frame(width: dragWidth)
} }
}
}
var redPane : some View {
ZStack(alignment: Alignment(horizontal: .trailing, vertical: .top)) {
Color.red
// shows and hides the green and blue pane, both grips
Toggle(isOn: $show.animation(), label: {
// change icon depending on toggle position
Image(systemName: show ? "eye" : "eye.slash")
.font(.title)
.foregroundColor(.primary)
})
.frame(width: 100)
.padding()
}
}
var purpleGrip : some View {
Color.purple
.frame(width: thickness)
.gesture(
DragGesture()
.onChanged { gesture in
let screenWidth = UIScreen.main.bounds.size.width
// the framework feeds little deltas as the drag continues updating state
let delta = gesture.translation.width
// make sure drag width stays bounded
dragWidth = max(dragWidth - delta, minWidth)
dragWidth = min(screenWidth - thickness - minWidth, dragWidth)
}
)
}
var greenPane : some View {
ZStack(alignment: Alignment(horizontal: .center, vertical: .top)) {
Color.green
// reset to original size
if showResize { withAnimation {
Button(action: { withAnimation {
dragWidth = UIScreen.main.bounds.size.width / 6
dragHeight = UIScreen.main.bounds.size.height / 5
} }, label: {
Image(systemName: "uiwindow.split.2x1")
.font(.title)
.foregroundColor(.primary)
.padding()
})
.buttonStyle(PlainButtonStyle())
}}
}
}
var orangeGrip : some View {
Color.orange
.frame(height: thickness)
.gesture(
DragGesture()
.onChanged { gesture in
let screenHeight = UIScreen.main.bounds.size.height
let delta = gesture.translation.height
dragHeight = max(dragHeight - delta, minHeight)
dragHeight = min(screenHeight - thickness - minHeight, dragHeight)
}
)
}
}
I decided to do a more SwiftUI-like approach. It can be any size so it is not fixed to the whole screen size. It can be called like this:
import SwiftUI
import ViewExtractor
struct ContentView: View {
var body: some View {
SeparatedStack(.vertical, ratios: [6, 4]) {
SeparatedStack(.horizontal, ratios: [2, 8]) {
Text("Top left")
Text("Top right")
}
SeparatedStack(.horizontal) {
Text("Bottom left")
Text("Bottom middle")
Text("Bottom right")
}
}
}
}
Result:
Code (read notes below):
// MARK: Extensions
extension Array {
subscript(safe index: Int) -> Element? {
guard indices ~= index else { return nil }
return self[index]
}
}
extension View {
#ViewBuilder func `if`<Output: View>(_ condition: Bool, transform: #escaping (Self) -> Output, else: #escaping (Self) -> Output) -> some View {
if condition {
transform(self)
} else {
`else`(self)
}
}
}
// MARK: Directional layout
enum Axes {
case horizontal
case vertical
}
private struct EitherStack<Content: View>: View {
let axes: Axes
let content: () -> Content
var body: some View {
switch axes {
case .horizontal: HStack(spacing: 0, content: content)
case .vertical: VStack(spacing: 0, content: content)
}
}
}
// MARK: Stacks
struct SeparatedStack: View {
static let dividerWidth: CGFloat = 5
static let minimumWidth: CGFloat = 20
private let axes: Axes
private let ratios: [CGFloat]?
private let views: [AnyView]
init<Views>(_ axes: Axes, ratios: [CGFloat]? = nil, #ViewBuilder content: TupleContent<Views>) {
self.axes = axes
self.ratios = ratios
views = ViewExtractor.getViews(from: content)
}
var body: some View {
GeometryReader { geo in
Color.clear
.overlay(SeparatedStackInternal(views: views, geo: geo, axes: axes, ratios: ratios))
}
}
}
// MARK: Stacks (internal)
private struct SeparatedStackInternal: View {
private struct GapBetween: Equatable {
let gap: CGFloat
let difference: CGFloat?
static func == (lhs: GapBetween, rhs: GapBetween) -> Bool {
lhs.gap == rhs.gap && lhs.difference == rhs.difference
}
}
#State private var dividerProportions: [CGFloat]
#State private var lastProportions: [CGFloat]
private let views: [AnyView]
private let geo: GeometryProxy
private let axes: Axes
init(views: [AnyView], geo: GeometryProxy, axes: Axes, ratios: [CGFloat]?) {
self.views = views
self.geo = geo
self.axes = axes
// Set initial proportions
if let ratios = ratios {
guard ratios.count == views.count else {
fatalError("Mismatching ratios array size. Should be same length as number of views.")
}
let total = ratios.reduce(0, +)
var proportions: [CGFloat] = []
for index in 0 ..< ratios.count - 1 {
let ratioTotal = ratios.prefix(through: index).reduce(0, +)
proportions.append(ratioTotal / total)
}
_dividerProportions = State(initialValue: proportions)
_lastProportions = State(initialValue: proportions)
} else {
let range = 1 ..< views.count
let new = range.map { index in
CGFloat(index) / CGFloat(views.count)
}
_dividerProportions = State(initialValue: new)
_lastProportions = State(initialValue: new)
}
}
var body: some View {
EitherStack(axes: axes) {
ForEach(views.indices) { index in
if index != 0 {
Color.gray
.if(axes == .horizontal) {
$0.frame(width: SeparatedStack.dividerWidth)
} else: {
$0.frame(height: SeparatedStack.dividerWidth)
}
}
let gapAtIndex = gapBetween(index: index)
views[index]
.if(axes == .horizontal) {
$0.frame(maxWidth: gapAtIndex.gap)
} else: {
$0.frame(maxHeight: gapAtIndex.gap)
}
.onChange(of: gapAtIndex) { _ in
if let difference = gapBetween(index: index).difference {
if dividerProportions.indices ~= index - 1 {
dividerProportions[index - 1] -= difference / Self.maxSize(axes: axes, geo: geo)
lastProportions[index - 1] = dividerProportions[index - 1]
}
}
}
}
}
.overlay(overlay(geo: geo))
}
#ViewBuilder private func overlay(geo: GeometryProxy) -> some View {
ZStack {
ForEach(dividerProportions.indices) { index in
Color(white: 0, opacity: 0.0001)
.if(axes == .horizontal) { $0
.frame(width: SeparatedStack.dividerWidth)
.position(x: lastProportions[index] * Self.maxSize(axes: axes, geo: geo))
} else: { $0
.frame(height: SeparatedStack.dividerWidth)
.position(y: lastProportions[index] * Self.maxSize(axes: axes, geo: geo))
}
.gesture(
DragGesture()
.onChanged { drag in
let translation = axes == .horizontal ? drag.translation.width : drag.translation.height
let currentPosition = lastProportions[index] * Self.maxSize(axes: axes, geo: geo) + translation
let offset = SeparatedStack.dividerWidth / 2 + SeparatedStack.minimumWidth
let minPos = highEdge(of: lastProportions, index: index - 1) + offset
let maxPos = lowEdge(of: lastProportions, index: index + 1) - offset
let newPosition = min(max(currentPosition, minPos), maxPos)
dividerProportions[index] = newPosition / Self.maxSize(axes: axes, geo: geo)
}
.onEnded { drag in
lastProportions[index] = dividerProportions[index]
}
)
}
}
.if(axes == .horizontal) {
$0.offset(y: geo.size.height / 2)
} else: {
$0.offset(x: geo.size.width / 2)
}
}
private static func maxSize(axes: Axes, geo: GeometryProxy) -> CGFloat {
switch axes {
case .horizontal: return geo.size.width
case .vertical: return geo.size.height
}
}
private func gapBetween(index: Int) -> GapBetween {
let low = lowEdge(of: dividerProportions, index: index)
let high = highEdge(of: dividerProportions, index: index - 1)
let gap = max(low - high, SeparatedStack.minimumWidth)
let difference = gap == SeparatedStack.minimumWidth ? SeparatedStack.minimumWidth - low + high : nil
return GapBetween(gap: gap, difference: difference)
}
private func lowEdge(of proportions: [CGFloat], index: Int) -> CGFloat {
var edge: CGFloat { proportions[index] * Self.maxSize(axes: axes, geo: geo) - SeparatedStack.dividerWidth / 2 }
return proportions[safe: index] != nil ? edge : Self.maxSize(axes: axes, geo: geo)
}
private func highEdge(of proportions: [CGFloat], index: Int) -> CGFloat {
var edge: CGFloat { proportions[index] * Self.maxSize(axes: axes, geo: geo) + SeparatedStack.dividerWidth / 2 }
return proportions[safe: index] != nil ? edge : 0
}
}
Note: this uses my GeorgeElsham/ViewExtractor for the ability to pass in #ViewBuilder content, rather than just an array of views. This part is not necessary, however I recommend it because it makes the code readable and more SwiftUI-like.
Here is what I have been using. I have a generic SplitView with a primary (P) and secondary (V) view created using ViewBuilders. The fraction identifies the ratio of primary to secondary width or height at open. I use secondaryHidden to force the primary to full width modulo half of the visibleThickness of the Splitter. The invisibleThickness is the grabbable width/height for the Splitter. The SizePreferenceKey is used with a GeometryReader on a clear background to capture the overallSize of the SplitView so that the fraction can be applied properly.
fileprivate struct SplitView<P: View, S: View>: View {
private let layout: Layout
private let zIndex: Double
#Binding var fraction: CGFloat
#Binding var secondaryHidden: Bool
private let primary: P
private let secondary: S
private let visibleThickness: CGFloat = 2
private let invisibleThickness: CGFloat = 30
#State var overallSize: CGSize = .zero
#State var primaryWidth: CGFloat?
#State var primaryHeight: CGFloat?
var hDrag: some Gesture {
// As we drag the Splitter horizontally, adjust the primaryWidth and recalculate fraction
DragGesture()
.onChanged { gesture in
primaryWidth = gesture.location.x
fraction = gesture.location.x / overallSize.width
}
}
var vDrag: some Gesture {
// As we drag the Splitter vertically, adjust the primaryHeight and recalculate fraction
DragGesture()
.onChanged { gesture in
primaryHeight = gesture.location.y
fraction = gesture.location.y / overallSize.height
}
}
enum Layout: CaseIterable {
/// The orientation of the primary and seconday views (e.g., Vertical = VStack, Horizontal = HStack)
case Horizontal
case Vertical
}
var body: some View {
ZStack(alignment: .topLeading) {
switch layout {
case .Horizontal:
// When we init the view, primaryWidth is nil, so we calculate it from the
// fraction that was passed-in. This lets us specify the location of the Splitter
// when we instantiate the SplitView.
let pWidth = primaryWidth ?? width()
let sWidth = overallSize.width - pWidth - visibleThickness
primary
.frame(width: pWidth)
secondary
.frame(width: sWidth)
.offset(x: pWidth + visibleThickness, y: 0)
Splitter(orientation: .Vertical, visibleThickness: visibleThickness)
.frame(width: invisibleThickness, height: overallSize.height)
.position(x: pWidth + visibleThickness / 2, y: overallSize.height / 2)
.zIndex(zIndex)
.gesture(hDrag, including: .all)
case .Vertical:
// When we init the view, primaryHeight is nil, so we calculate it from the
// fraction that was passed-in. This lets us specify the location of the Splitter
// when we instantiate the SplitView.
let pHeight = primaryHeight ?? height()
let sHeight = overallSize.height - pHeight - visibleThickness
primary
.frame(height: pHeight)
secondary
.frame(height: sHeight)
.offset(x: 0, y: pHeight + visibleThickness)
Splitter(orientation: .Horizontal, visibleThickness: visibleThickness)
.frame(width: overallSize.width, height: invisibleThickness)
.position(x: overallSize.width / 2, y: pHeight + visibleThickness / 2)
.zIndex(zIndex)
.gesture(vDrag, including: .all)
}
}
.background(GeometryReader { geometry in
// Track the overallSize using a GeometryReader on the ZStack that contains the
// primary, secondary, and splitter
Color.clear
.preference(key: SizePreferenceKey.self, value: geometry.size)
.onPreferenceChange(SizePreferenceKey.self) {
overallSize = $0
}
})
.contentShape(Rectangle())
}
init(layout: Layout, zIndex: Double = 0, fraction: Binding<CGFloat>, secondaryHidden: Binding<Bool>, #ViewBuilder primary: (()->P), #ViewBuilder secondary: (()->S)) {
self.layout = layout
self.zIndex = zIndex
_fraction = fraction
_primaryWidth = State(initialValue: nil)
_primaryHeight = State(initialValue: nil)
_secondaryHidden = secondaryHidden
self.primary = primary()
self.secondary = secondary()
}
private func width() -> CGFloat {
if secondaryHidden {
return overallSize.width - visibleThickness / 2
} else {
return (overallSize.width * fraction) - (visibleThickness / 2)
}
}
private func height() -> CGFloat {
if secondaryHidden {
return overallSize.height - visibleThickness / 2
} else {
return (overallSize.height * fraction) - (visibleThickness / 2)
}
}
}
fileprivate struct SizePreferenceKey: PreferenceKey {
static var defaultValue: CGSize = .zero
static func reduce(value: inout CGSize, nextValue: () -> CGSize) {
value = nextValue()
}
}
With the filePrivate SplitView in place, I use HSplitView and VSplitView as the public entry points.
/// A view containing a primary view and a secondary view layed-out vertically and separated by a draggable horizontally-oriented Splitter
///
/// The primary view is above the secondary view.
struct VSplitView<P: View, S: View>: View {
let zIndex: Double
#Binding var fraction: CGFloat
#Binding var secondaryHidden: Bool
let primary: ()->P
let secondary: ()->S
var body: some View {
SplitView(layout: .Vertical, zIndex: zIndex, fraction: $fraction, secondaryHidden: $secondaryHidden, primary: primary, secondary: secondary)
}
init(zIndex: Double = 0, fraction: Binding<CGFloat>, secondaryHidden: Binding<Bool>? = nil, #ViewBuilder primary: #escaping (()->P), #ViewBuilder secondary: #escaping (()->S)) {
self.zIndex = zIndex
_fraction = fraction
_secondaryHidden = secondaryHidden ?? .constant(false)
self.primary = primary
self.secondary = secondary
}
}
/// A view containing a primary view and a secondary view layed-out horizontally and separated by a draggable vertically-oriented Splitter
///
/// The primary view is to the left of the secondary view.
struct HSplitView<P: View, S: View>: View {
let zIndex: Double
#Binding var fraction: CGFloat
#Binding var secondaryHidden: Bool
let primary: ()->P
let secondary: ()->S
var body: some View {
SplitView(layout: .Horizontal, fraction: $fraction, secondaryHidden: $secondaryHidden, primary: primary, secondary: secondary)
}
init(zIndex: Double = 0, fraction: Binding<CGFloat>, secondaryHidden: Binding<Bool>? = nil, #ViewBuilder primary: #escaping (()->P), #ViewBuilder secondary: #escaping (()->S)) {
self.zIndex = zIndex
_fraction = fraction
_secondaryHidden = secondaryHidden ?? .constant(false)
self.primary = primary
self.secondary = secondary
}
}
The Splitter is a ZStack with a visible RoundedRectangle with visibleThickness on top of a clear Color with invisibleThickness.
/// The Splitter that separates the primary from secondary views in a SplitView.
struct Splitter: View {
private let orientation: Orientation
private let color: Color
private let inset: CGFloat
private let visibleThickness: CGFloat
private var invisibleThickness: CGFloat
enum Orientation: CaseIterable {
/// The orientation of the Divider itself.
/// Thus, use Horizontal in a VSplitView and Vertical in an HSplitView
case Horizontal
case Vertical
}
var body: some View {
ZStack(alignment: .center) {
switch orientation {
case .Horizontal:
Color.clear
.frame(height: invisibleThickness)
.padding(0)
RoundedRectangle(cornerRadius: visibleThickness / 2)
.fill(color)
.frame(height: visibleThickness)
.padding(EdgeInsets(top: 0, leading: inset, bottom: 0, trailing: inset))
case .Vertical:
Color.clear
.frame(width: invisibleThickness)
.padding(0)
RoundedRectangle(cornerRadius: visibleThickness / 2)
.fill(color)
.frame(width: visibleThickness)
.padding(EdgeInsets(top: inset, leading: 0, bottom: inset, trailing: 0))
}
}
.contentShape(Rectangle())
}
init(orientation: Orientation, color: Color = .gray, inset: CGFloat = 8, visibleThickness: CGFloat = 2, invisibleThickness: CGFloat = 30) {
self.orientation = orientation
self.color = color
self.inset = inset
self.visibleThickness = visibleThickness
self.invisibleThickness = invisibleThickness
}
}
Here's an example. One additional note is that I had to use zIndex for the Splitter when SplitViews contained other SplitViews that contain other SplitViews. This is because the because the overlap of the multiple Splitters with the primary/secondary of adjacent views prevents the drag gesture from being detected. It's not necessary to specify in simpler cases.
struct ContentView: View {
var body: some View {
HSplitView(
zIndex: 2,
fraction: .constant(0.5),
primary: { Color.red },
secondary: {
VSplitView(
zIndex: 1,
fraction: .constant(0.5),
primary: { Color.blue },
secondary: {
HSplitView(
zIndex: 0,
fraction: .constant(0.5),
primary: { Color.green },
secondary: { Color.yellow }
)
}
)
}
)
}
}
And the result...
I hope I worded the title correctly. Basically, I'm making a tinder-like interface that will allow the user to swipe through a set of cards. I've followed along with a tutorial to successfully make the swiping through the cards work. However, I can't for the life of me figure out how to get a button to do the same.
Here is an image of the ContentView ---> https://i.imgur.com/K9zN6Vj.png
Here is the main ContentView Code
import SwiftUI
struct ContentView: View {
let cards = Card.data.shuffled()
#State var isHelp = false
var body: some View {
VStack {
ZStack {
AnimatedBackground()
.ignoresSafeArea()
.blur(radius: 25)
VStack {
//Top Stack
Spacer()
TopStack()
//Card
ZStack {
ForEach(cards, id: \.id) { index in
CardView(card: index)
// .shadow(color: .black, radius: 10)
.padding(8)
}
}
//Bottom Stack
BottomStack()
}
}
}
}
}
Here is the CardView code
struct CardView: View {
#State var card: Card
var body: some View {
ZStack {
Color("myBlue")
Text("\(card.text)")
.foregroundColor(.white)
}
.cornerRadius(20)
// Step 1 - ZStack follows the coordinate of the card model
.offset(x: card.x, y: card.y)
.rotationEffect(.init(degrees: card.degree))
// Step 2 - Gesture recognizer updaets the coordinate calues of the card model
.gesture (
DragGesture()
.onChanged { value in
// user is dragging the view
withAnimation(.default) {
card.x = value.translation.width
card.y = value.translation.height
card.degree = 7 * (value.translation.width > 0 ? 1 : -1)
}
}
.onEnded { value in
// do something when the user stops dragging
withAnimation(.interpolatingSpring(mass: 1.0, stiffness: 50, damping: 8, initialVelocity: 0)) {
switch value.translation.width {
case 0...100:
card.x = 0; card.degree = 0; card.y = 0
case let x where x > 100:
card.x = 500; card.degree = 12
case (-100)...(-1):
card.x = 0; card.degree = 0; card.y = 0;
case let x where x < -100:
card.x = -500; card.degree = -12
default: card.x = 0; card.y = 0
}
}
}
)
}
}
The bottom stack is just buttons. I want the buttons to essentially go forward and backward through the index, but I don't know how to access it because it's in a different view. Again, I'm not entirely sure how the main swiping is working; I followed along with a tutorial so I'm definitely out of my comfort zone. Maybe a button wouldn't work at all with the way the swiping is being achieved? Any help is super appreciated, thank you for taking a look!