for what reason dask astype givers error if errors keyword is specified, while that should work fine according to the docs?
df['listing_id'] = df['listing_id'].astype('int32', errors='ignore')
Here is the error :
TypeError: astype() got an unexpected keyword argument 'errors'
The doc also says
This docstring was copied from pandas.core.frame.DataFrame.astype.
Some inconsistencies with the Dask version may exist.
You were warned :)
Related
If I create a new F# file 'Test.fsx' in VSCode with the line
#I __SOURCE_DIRECTORY__
attempting to run the code in FSI generates the error
Test.fsx(2,4): error FS0010: Unexpected compiler generated literal in interaction. Expected incomplete structured construct at or before this point, ';', ';;' or other token.
Any idea what might be going wrong?
It is a known issue in VS2019, which has been fixed in VS2022.
https://github.com/dotnet/fsharp/issues/13467
You may replace the code with
#I "."
I'm trying to provide a good experience to users that are using JSON and the parser is on the backend (Ruby).
Most of the time, when you get a badly formatted JSON payload the error is of the format XXX unexpected token at '<entire payload here>'. That's not very user-friendly nor practical.
My question is: Is there a list of the XXX error codes that could help create better error messages that could be understood by beginners and not-really-tech-people?
Thanks!
XXX in this kind of errors is not a special code of the error. It is just a line number from the file where this error was raised. For example, for Ruby 2.5.1 you'll get JSON::ParserError (765: unexpected token at https://github.com/ruby/ruby/blob/v2_5_1/ext/json/parser/parser.rl#L765
You can find a list in the documentation for the module.
Think this covers it:
JSON::JSONError
JSON::GeneratorError
JSON::GenericObject
# The base exception for JSON errors.
JSON::MissingUnicodeSupport
# This exception is raised if the required unicode support is missing on the system. Usually this means that the iconv library is not installed.
JSON::NestingError
# This exception is raised if the nesting of parsed data structures is too deep.
JSON::ParserError
# This exception is raised if a parser error occurs.
JSON::UnparserError
# This exception is raised if a generator or unparser error occurs.
JSON::JSONError is the parent class, so you can rescue from that and provide per-error-class messages as needed.
I feel it's worth noting that in my experience the vast majority of errors relating to JSON are of the class JSON::ParserError. Another common issue worth considering is getting ArgumentError if nil is passed as an argument.
As an example of how this could be used, you could work with something like the following:
begin
JSON.parse(your_json)
rescue JSON::JSONError, ArgumentError => e
{ error: I18n.t(e.to_s) } # <- or whatever you want to do per error
end
Hope that helps - let me know how you get on :)
I want to run a (python3) process from my (yap) prolog script and read its output formatted as a list of integers, e.g. [1,2,3,4,5,6].
This is what I do:
process_create(path(python3),
['my_script.py', MyParam],
[stdout(pipe(Out))]),
read(Out, OutputList),
close(Out).
However, it fails at read/2 predicate with the error:
PL_unify_term: PL_int64 not supported
Exception ignored in: <_io.TextIOWrapper name='<stdout>' mode='w' encoding='UTF-8'>
BrokenPipeError: [Errno 32] Broken pipe
I am sure that I can run the process correctly because with [stdout(std)] parameter given to process_create the program outputs [1,2,3,4,5,6] as expected.
Weird thing is that when I change the process to output some constant term (as constant_term) it still gives the same PL_int64 error. Appending a dot to the process' output ([1,2,3,4,5,6].) doesn't solve the error. Using read_term/3 gives the same error. read_string/3 is undefined in YAP-Prolog.
How can I solve this problem?
After asking at the yap-users mailing list I got the solution.
Re-compiled YAP Prolog 6.2.2 with libGMP option and now it works. It may also occur in 32-bit YAP.
I've been running into a syntax error for a very long time now and I am unsure as to what could be causing it. The debug log is as follows:
SQL DEBUG: SELECT ecdImages.checkSum, ecdImages.creationDate, ecdImages.filename, ecdImages.height, ecdImages.latitude, ecdImages.locationString, ecdImages.longitude, ecdImages.order, ecdImages.photoId, ecdImages.photoLogValues, ecdImages.requiresDeletion, ecdImages.requiresUpload, ecdImages.rotationAngle, ecdImages.scale, ecdImages.source, ecdImages.timestamp, ecdImages.title, ecdImages.transform, ecdImages.width, ecdImages.x, ecdImages.y, ecdImages.book__objectid, ecdImages.page__objectid FROM ecdImages WHERE ecdImages.__objectid=?;
could not prepare statement: near "order": syntax error
Order is of type Integer 16 and for your reference, I am currently using Encrypted-Core-Data as found on github. Any thoughts?
As pointed out by CL in the comments, I was using a reserved keyword. Refer to SQLite Keywords.
I try to use angular-ui-bootstrap datepicker and it upset me for a while with an error on firebug console (Firefox 21) saying
Error: array is undefined
indexOf#http://localhost:9000/components/angular/angular.js:526
arrayRemove#http://localhost:9000/components/angular/angular.js:535
JQLiteUnbind#http://localhost:9000/components/angular/angular.js:1630
JQLite.prototype[name]#http://localhost:9000/components/angular/angular.js:2203
.link/<#http://localhost:9000/components/angular-ui-bootstrap-bower/ui-bootstrap-tpls.min.js:1
Scope.prototype.$digest#http://localhost:9000/components/angular/angular.js:7942
Scope.prototype.$apply#http://localhost:9000/components/angular/angular.js:8143
done#http://localhost:9000/components/angular/angular.js:9170
completeRequest#http://localhost:9000/components/angular/angular.js:9333
createHttpBackend/</xhr.onreadystatechange#http://localhost:9000/components/angular/angular.js:9304
http://localhost:9000/components/angular/angular.js
Line 5754
After I check every datepicker settings I check the given example in documentation, followed the link "edit it on plunker" and I got a similar error.
Error: array is undefined
indexOf#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:510
arrayRemove#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:519
JQLiteUnbind#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:1596
JQLite.prototype[name]#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:2149
.link/<#http://angular-ui.github.io/bootstrap/ui-bootstrap-tpls-0.5.0.js:1229
Scope.prototype.$digest#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:7878
Scope.prototype.$apply#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:8079
bootstrap/<#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:962
invoke#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:2843
bootstrap#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:961
angularInit#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:936
#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:14729
trigger#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:1723
createEventHandler/eventHandler/<#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:1958
forEach#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:133
createEventHandler/eventHandler#http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:1957
http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js
Line 5687
Then I try Chrome Version 26.0.1410.63 and I got a different error
TypeError: Cannot read property 'indexOf' of undefined
at indexOf (http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:510:12)
at arrayRemove (http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:519:15)
at JQLiteUnbind (http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:1596:7)
at Object.JQLite.(anonymous function) [as unbind] (http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:2149:17)
at Object.fn (http://angular-ui.github.io/bootstrap/ui-bootstrap-tpls-0.5.0.js:1229:21)
at Object.Scope.$digest (http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:7878:27)
at Object.Scope.$apply (http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:8079:24)
at http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:962:13
at Object.invoke (http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:2843:25)
at bootstrap (http://ajax.googleapis.com/ajax/libs/angularjs/1.0.5/angular.js:960:12)
It works but the error message upset me a lot and I thought that was something wrong with my code.
Can I assume this is not related with example given but with some internals or is the example missing something?
ui-bootstrap 0.5.0 has a bug,
(it tries to unbind 'focus' event handler, but handler doesn't exist)
https://github.com/angular-ui/bootstrap/blob/gh-pages/ui-bootstrap-tpls-0.5.0.js#L1226
you can apply this changes
https://github.com/angular-ui/bootstrap/commit/bf30898da27272df75f6c7ff26545ed16ebf1978
or build it directly from github
or wait for 0.6.0