A program I am trying to install requires the installation of PyQt5 5.15.0 , which gives me this error. The odd thing is that the installation works fine for the latest version of PyQt5 (5.15.2), but this program requires 5.15.0 specifically.
Command Output:
Collecting PyQt5==5.15.0
Using cached PyQt5-5.15.0.tar.gz (3.3 MB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing wheel metadata ... error
ERROR: Command errored out with exit status 1:
command: 'c:\users\mshal\appdata\local\programs\python\python39\python.exe' 'C:\Users\mshal\AppData\Roaming\Python\Python39\site-packages\pip\_vendor\pep517\_in_process.py' prepare_metadata_for_build_wheel 'C:\Users\mshal\AppData\Local\Temp\tmp41s11ev6'
cwd: C:\Users\mshal\AppData\Local\Temp\pip-install-sfw90hvc\pyqt5_e2cc46859b554da7b84798abae5378ba
Complete output (31 lines):
Traceback (most recent call last):
File "C:\Users\mshal\AppData\Roaming\Python\Python39\site-packages\pip\_vendor\pep517\_in_process.py", line 126, in prepare_metadata_for_build_wheel
hook = backend.prepare_metadata_for_build_wheel
AttributeError: module 'sipbuild.api' has no attribute 'prepare_metadata_for_build_wheel'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "C:\Users\mshal\AppData\Roaming\Python\Python39\site-packages\pip\_vendor\pep517\_in_process.py", line 280, in <module>
main()
File "C:\Users\mshal\AppData\Roaming\Python\Python39\site-packages\pip\_vendor\pep517\_in_process.py", line 263, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
File "C:\Users\mshal\AppData\Roaming\Python\Python39\site-packages\pip\_vendor\pep517\_in_process.py", line 130, in prepare_metadata_for_build_wheel
return _get_wheel_metadata_from_wheel(backend, metadata_directory,
File "C:\Users\mshal\AppData\Roaming\Python\Python39\site-packages\pip\_vendor\pep517\_in_process.py", line 159, in _get_wheel_metadata_from_wheel
whl_basename = backend.build_wheel(metadata_directory, config_settings)
File "C:\Users\mshal\AppData\Local\Temp\pip-build-env-nnx_yu09\overlay\Lib\site-packages\sipbuild\api.py", line 51, in build_wheel
project = AbstractProject.bootstrap('pep517')
File "C:\Users\mshal\AppData\Local\Temp\pip-build-env-nnx_yu09\overlay\Lib\site-packages\sipbuild\abstract_project.py", line 83, in bootstrap
project.setup(pyproject, tool, tool_description)
File "C:\Users\mshal\AppData\Local\Temp\pip-build-env-nnx_yu09\overlay\Lib\site-packages\sipbuild\project.py", line 479, in setup
self.apply_user_defaults(tool)
File "project.py", line 62, in apply_user_defaults
super().apply_user_defaults(tool)
File "C:\Users\mshal\AppData\Local\Temp\pip-build-env-nnx_yu09\overlay\Lib\site-packages\pyqtbuild\project.py", line 79, in apply_user_defaults
super().apply_user_defaults(tool)
File "C:\Users\mshal\AppData\Local\Temp\pip-build-env-nnx_yu09\overlay\Lib\site-packages\sipbuild\project.py", line 225, in apply_user_defaults
self.builder.apply_user_defaults(tool)
File "C:\Users\mshal\AppData\Local\Temp\pip-build-env-nnx_yu09\overlay\Lib\site-packages\pyqtbuild\builder.py", line 66, in apply_user_defaults
raise PyProjectOptionException('qmake',
sipbuild.pyproject.PyProjectOptionException
----------------------------------------
ERROR: Command errored out with exit status 1: 'c:\users\mshal\appdata\local\programs\python\python39\python.exe' 'C:\Users\mshal\AppData\Roaming\Python\Python39\site-packages\pip\_vendor\pep517\_in_process.py' prepare_metadata_for_build_wheel 'C:\Users\mshal\AppData\Local\Temp\tmp41s11ev6' Check the logs for full command output.
I am on the latest version of pip. Any ideas on the root cause of this issue?
What helped me is upgrading pip from 20.2.3 to the latest one (in my case 21.1.1)
For Mac/Homebrew users.
The answer by #the-x is leading in the right direction. On a Mac with QT5 installed via Homebrew the qmake binary just needs to be added to the path. This can be achieved through
export PATH="/opt/homebrew/opt/qt5/bin:$PATH"
(of course depending on where the homebrew files are installed)
Running on arm with python3.6 (ubuntu18 on nvidia Xavier):
sudo apt install qt5-default
For MacOS users.
I am on Apple M1 silicon using Python 3.9.8. What worked for me was #Apaul's comment in the original question section. Install pyqt5-sip prior to pyqt5.
I also have an Intel Mac and on that machine, I do not need to do this.
Checking the binaries that PyQt5 provides in pypi for version 5.15.0 I see that it does not provide the binaries for python3.9 in windows, so pip is trying to compile using the source code which is complicated and can generate several dependency problems (for example you must have Qt 5.15 installed, etc). So my recommendation is to install a more updated version of PyQt5, for example 5.15.2 since if it provides the binaries for python3.9 on windows, in addition to being a wrapper of an LTS version of Qt then it will have solved several bugs.
python -m pip install PyQt5==5.15.2
Another solution is to use python3.8 instead of python3.9 so that you can install pyqt5 5.15.0 from pypi without problems.
Upgrading your pip enables you to install PyQt5. Personally, I had the same issue while installing PyQt6 and I upgraded my pip, and everything installed perfectly. I think both python and pip versions play an important role in installing PyQt so make sure you have later versions.
This is the command I used in Linux:
pip install --upgrade pip
Combining several answers on this question: On an Apple M1 Pro Macbook with macOS Ventura 13.0.1, with Homebrew 3.6.17 and python 3.11.0 the following commands fixed it for me (no sudo):
brew install qt5
export PATH="/opt/homebrew/opt/qt5/bin:$PATH"
python3 -m ensurepip --default-pip
pip3 install pyqt5-sip
pip3 install pyqt5 --config-settings --confirm-license= --verbose
That last step calls qmake to compile all of Qt on your M1 and takes many minutes to complete, be patient and let it finish.
Since qt5-default was not available, I installed qt5-default's dependencies
sudo apt-get install qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools
after that I installed pyqt5 via apt-get first and afterwards via pip
sudo apt-get install pyqt5-dev
pip install pyqt5
now wheel seems to work
side-note:
I am not sure if sudo apt-get install pyqt5-dev is even necessary
The error message thrown here is misleading - it's not an issue with a sipbuild.api attribute. Indeed, in this case program qmake is missing, see last line of the Python traceback. Have a look if it's installed on your system and add it to your PATH variable. Otherwise, install it. On Linux this would be done with
sudo apt-get install qt5-qmake
I had this problem on my M1 Mac using Python 3.9.12 when I was trying to install a library: pip install pixellib.
The first thing I did was: pip install pixellib --verbose to see the whole log, and there I noticed that PyQt5 was waiting for an input. So then I found someone else with that issue, and used pip install pyqt5 --config-settings --confirm-license= --verbose which took some time to compile, but worked!
I could not get any of the above solutions to work but I managed to get it working using python3.9, PyQt5=5.15.2, pip=22.0.2 and sip=6.5.0 by using sudo apt-get install PyQt5. If you need it in a virtual environment, you can manually copy the PyQt5 folder from your default /usr/lib/python3/dist-packages to the site-packages folder in your virtual environment.
To all those that are struggling with Apple M1 installation, here is a working solution, specifically addressing the problem of installing the pixellib library that depends on PyQt5 but you can apply it equally to other libs:
PyQt5 is not supported on Apple M1, it needs qt6: https://www.reddit.com/r/learnpython/comments/o4w1ut/comment/h2jele3/?utm_source=share&utm_medium=web2x&context=3 , https://www.qt.io/product/qt6
this means you need to install PyQt6: python3 -m pip install PyQt6
go to the lib you need, in my case pixellib: https://pypi.org/project/pixellib/#files and
download the wheel file
get the wheel tool: pip install wheel
unpack the wheel wheel unpack pixellib-0.7.1-py3-none-any.whl
Change its dependency of PyQt5 to PyQt6
edit pixellib-0.7.1/pixellib-0.7.1.dist-info/METADATA
pyQt5 => pyQt6
pack it back wheel pack pixellib-0.7.1
install it: pip install pixellib-0.7.1-py3-none-any.whl
test in python: `
# should work
import pixellib
P.S. thanks to Terra and ChaOS for supporting work on the project underlying this report.
I finally managed to make it works on M1/M2 Macbook Pro.
None of these answers worked for me, so I looked at brew to install pyqt.
The following command will install pyqt5 via brew:
brew install pyqt#5
Then it just worked.
This can be resolved by switching to an environment with Python >= 3.8
I am using Windows and using the CMake GUI. In CMake, I set the source code path at
C:/Users/me/Downloads/opencv
opencv and opencv_contribwere obtained from the OpenCV github repos
I set the build path in Cmake as C:/Users/me/Downloads/builds/opencv
I then set OPENCV_EXTRA_MODULES_PATH as C:/Users/me/Downloads/opencv-3.4/source/opencv_contrib/modules and checked WITH_CUDA
after Configuring, I get the error:
CMake Error at cmake/OpenCVDetectCUDA.cmake:125 (string):
string sub-command REPLACE requires at least four arguments.
Call Stack (most recent call first):
cmake/OpenCVDetectCUDA.cmake:174 (ocv_wipeout_deprecated)
cmake/OpenCVFindLibsPerf.cmake:43 (include)
CMakeLists.txt:688 (include)
can anyone help with this?
I installed opencv using the conda command:
conda install -c conda-forge opencv
The installation was successful without errors. Typing conda list also indicates opencv installed. But import cv2 gives the error: DLL load failed: The specified module could not be found.
I note the opencv does not show up in the Lib/site-packages folder, but occurs in the pkgs folder, that is, C:\\Anaconda\\Anaconda3.7\\pkgs\\opencv-4.1.1-py37h6afde12_1. The site-packages folder has a file cv2.cp37-win_amd64.pyd;
What is problem with the import cv2 error? Was the conda-based opencv installation really successful? My python version is python3.7.1.
A similar problem has been reported here DLL load failed error when importing cv2
Try to install with pip. 'pip install opencv-python'
Did you install the contribution packages of opencv?
I'm trying to compile a project with CMake. I'm getting an error:
Found OpenCV Windows Pack but it has not binaries compatible with your
configuration.
You should manually point CMake variable OpenCV_DIR to your build of OpenCV
library.
Call Stack (most recent call first):
CMakeLists.txt:9 (FIND_PACKAGE)
CMake Error at CMakeLists.txt:9 (FIND_PACKAGE):
Found package configuration file:
C:/Users/Ghenja/AppData/Local/opencv/build/OpenCVConfig.cmake
but it set OpenCV_FOUND to FALSE so package "OpenCV" is considered to be
NOT FOUND.
I don't understand what is happening. Please help me to solve this problem.
Clean your project and remove CMakeCache.txt. OpenCV_FOUND is probably cached now.
If that doesn't work, then run your cmake command with additional flags just to be sure:
cmake -DOpenCV_FOUND:BOOL=ON -DOpenCV_DIR=/path/to/your/OpenCV
I am configuring the packages for torch.I can't install these packages using luarocks.
for the matio, I followed the instruction on github, the matio is installed. But I cannot require it.
for the hdf5,see following.
Does anyone know what is the problem? I am new to Lua. Thanks very much!
$luarocks install hdf5
then I got the error information:
CMake Error at /usr/local/Cellar/cmake/3.5.1/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:148 (message):
Could NOT find HDF5: Found unsuitable version "", but required is at least
"1.8" (found HDF5_hdf5_LIBRARY-NOTFOUND)
Call Stack (most recent call first):
/usr/local/Cellar/cmake/3.5.1/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:386 (_FPHSA_FAILURE_MESSAGE)
/usr/local/Cellar/cmake/3.5.1/share/cmake/Modules/FindHDF5.cmake:398 (find_package_handle_standard_args)
CMakeLists.txt:4 (FIND_PACKAGE)
-- Configuring incomplete, errors occurred!
See also "/tmp/luarocks_hdf5-20-0-5408/torch-hdf5/build/CMakeFiles/CMakeOutput.log".
make: *** No targets specified and no makefile found. Stop.
Error: Build error: Failed building.
I encountered the same problem on ubuntu >= 13.04, this command solves my problem:
sudo apt-get install libhdf5-serial-dev hdf5-tools
Then you can use luarocks to install hdf5
luarocks install hdf5
For other systems, you can reference this link for dependencies.