When I run this command:
docker-compose pull --quiet --ignore-pull-failures
I get this error:
ERROR: Get "https://registry-1.docker.io/v2/": Bad Gateway
This was working fine before but it suddenly stopped working.
Is this docker issue ?
It happens sometimes!
Docker is not working at that time. You should restart your docker server. If you’re in windows and have a docker engine installed restart it manually by clicking on the docker icon on the bottom right then restart docker.
Or try the following command
service docker restart
docker pull...
If you are on linux based machine try the following command:
$ sudo systemctl daemon-reload #THIS IS RESCUE COMMAND…
$ sudo systemctl restart docker
$ sudo systemctl status docker
$ docker pull ...
Note : Try to log out and then login before executing the commands.
docker logout
docker login
you may also need to try connecting docker VM to direct internet connection without any firewall.
sudo docker ... works.
Maybe its firewall issue, but I am not sure
Please advise how to remove docker proxy settings,
I remember that I had set docker to use proxy initially and I removed file from /etc/systemd/system/docker.service.d.
I am trying to execute following command
sudo docker build -t <image_name> .
Is there a way to run docker command with no_proxy using --build-arg?
Please advise
Thanks
You have chosen to customise docker settings using systemd, which is nice and all, but in that case to change those settings you will always need to restart the service.
In your case you need to use a different approach , by using environment variables.
It will make your life easier, hope it helps , good luck.
after removing http-proxy.conf file from /etc/systemd/system/docker.service.d.
you have to reload daemon and restart docker service.
sudo systemctl daemon-reload
sudo systemctl restart docker
you can verify how http proxy and https proxy are valued with the command below
sudo docker info
or with the command
sudo systemctl show --property=Environment docker
There is a section where you have activated this proxy. According to your document, there are two places to enable the proxy
https://docs.docker.com/network/proxy/#use-environment-variables
The first file
~/.docker/config.json
You can delete your config from there
And the second one is inside environment variables
In both cases, you must reset Docker after doing this, you can use the following commands
sudo systemctl daemon-reload
sudo systemctl restart docker
This question already has answers here:
x509: certificate signed by unknown authority - both with docker and with github
(3 answers)
Closed 4 years ago.
i need your help,
My docker don't run on my enterprise, I do not know what to do
kaue default # docker run hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
9bb5a5d4561a: Pulling fs layer
docker: error pulling image configuration: Get https://production.cloudflare.docker.com/registry-v2/docker/registry/v2/blobs/sha256/e3/e38bc07ac18ee64e6d59cf2eafcdddf9cec2364dfe129fe0af75f1b0194e0c96/data?verify=1528483070-KGbywXnskgTKu5B9AuTdFPQdYjs%3D: x509: certificate signed by unknown authority.
See 'docker run --help'
.
I have a Windows 7, and Authenticated proxy in my job...
Set the proxy in your environment before running the docker run command...
set HTTPS_PROXY=http://user:password#proxy_name_or_ip:proxy_port
For example
set HTTPS_PROXY=http://myusername:Password1#proxy.local:8080
For docker on windows, follow these steps to configure the proxy variables:
In powershell perform the following for HTTP_PROXY and HTTPS_PROXY:
[Environment]::SetEnvironmentVariable("HTTP_PROXY", "http://username:password#proxy:port/", [EnvironmentVariableTarget]::Machine)
Once the variables are set, restart the service with powershell:
Restart-Service docker
Edit: For Linux native installs of Docker using systemd, follow these steps to configure your proxy:
Create a systemd drop-in directory for the docker service:
$ sudo mkdir -p /etc/systemd/system/docker.service.d
Create a file called /etc/systemd/system/docker.service.d/http-proxy.conf that adds the HTTP_PROXY environment variable:
[Service]
Environment="HTTP_PROXY=http://proxy.example.com:80/"
Or, if you are behind an HTTPS proxy server, create a file called /etc/systemd/system/docker.service.d/https-proxy.conf that adds the HTTPS_PROXY environment variable:
[Service]
Environment="HTTPS_PROXY=https://proxy.example.com:443/"
If you have internal Docker registries that you need to contact without proxying you can specify them via the NO_PROXY environment variable:
[Service]
Environment="HTTP_PROXY=http://proxy.example.com:80/" "NO_PROXY=localhost,127.0.0.1,docker-registry.somecorporation.com"
Or, if you are behind an HTTPS proxy server:
[Service]
Environment="HTTPS_PROXY=https://proxy.example.com:443/" "NO_PROXY=localhost,127.0.0.1,docker-registry.somecorporation.com"
Flush changes:
$ sudo systemctl daemon-reload
Restart Docker:
$ sudo systemctl restart docker
Verify that the configuration has been loaded:
$ systemctl show --property=Environment docker
Environment=HTTP_PROXY=http://proxy.example.com:80/
Or, if you are behind an HTTPS proxy server:
$ systemctl show --property=Environment docker
Environment=HTTPS_PROXY=https://proxy.example.com:443/
For special characters in your password, you can use unicode to encode the characters:
If your original password was: F#o:o!B#ar$
The unicode equivalent would be: F%40o%3Ao%21B%23ar%24
unfortunately, I can't use my docker behind the proxy , I do what googling search suggest and this is the error I get when I run sudo docker run hello-world:
Unable to find image 'hello-world:latest' locally
docker: Error response from daemon: Get https://registry-
1.docker.io/v2/: Proxy Authentication Required.
See 'docker run --help'.
this is my '/etc/systemd/system/docker.service.d/http-proxy.conf' file :
[Service]
Environment="HTTP_PROXY=http://user:pass#127.0.0.1:8800/"
Environment="HTTPS_PROXY=https://user:pass#127.0.0.1:8800/"
my "etc/default/docker" file :
export http_proxy="http://127.0.0.1:3128/"
export https_proxy="http://127.0.0.1:3128/"
export HTTP_PROXY="http://127.0.0.1:3128/"
export HTTPS_PROXY="http://127.0.0.1:3128/"
what is the problem?
thank you :)
try this,
$ sudo vim /etc/resolv.conf
#add these lines on top and above one for home router…
nameserver 8.8.8.8
nameserver 8.8.4.4
After saving the /etc/resolv.conf file.
run $ sudo systemctl daemon-reload for reloading daemon process.
Then restart your docker :
run $ sudo systemctl restart docker
Docker is not available is some countries because of some unfair sanctions by US which are targeting people directly also startups ...
Any way you can use registry docker instead of docker_hub.
But for creating images and container from micro-services and projects and run them (local) you check this Link
All the best :)
I installed Docker-Toolbox just now while following their webpage
I started with Docker QuickStart Terminal and see following
## .
## ## ## ==
## ## ## ## ## ===
/"""""""""""""""""\___/ ===
~~~ {~~ ~~~~ ~~~ ~~~~ ~~~ ~ / ===- ~~~
\______ o __/
\ \ __/
\____\_______/
docker is configured to use the default machine with IP 192.168.99.100
For help getting started, check out the docs at https://docs.docker.com
bash-3.2$
But when I try to perform docker pull hello-world, this is what I see
bash-3.2$ docker run hello-world
Unable to find image 'hello-world:latest' locally
Pulling repository docker.io/library/hello-world
Network timed out while trying to connect to https://index.docker.io/v1/repositories/library/hello-world/images. You may want to check your internet connection or if you are behind a proxy.
bash-3.2$
What's wrong?
I had the same problem this morning and the following fixed it for me:
$ docker-machine restart default # Restart the environment
$ eval $(docker-machine env default) # Refresh your environment settings
It appears that this is due to the Docker virtual machine getting itself into a strange state. There is an open github issue here
I installed Docker without the Toolbox on Windows 10, so the version that requires Hyper-V to be enabled.
For Docker version 1.12 I had to go into the taskbar, right click the Docker Icon, select Settings -> Network and set the DNS Server to fixed, so that is uses Google's DNS server at 8.8.8.8.
Once that setting was changed, it finally worked.
The simpler solution is to add the following entry in /etc/default/docker file
export http_proxy="http://HOST:PORT/"
and restart the docker service
service docker restart
Update August 2016
Using Docker for Mac (version 1.12.0), was seeing issues of the form:
➜ docker pull node
Using default tag: latest
Pulling repository docker.io/library/node
Network timed out while trying to connect to https://index.docker.io/v1/repositories/library/node/images. You may want to check your internet connection or if you are behind a proxy.`enter code here`
This was resolved by updating my MacBook Pro wireless network settings to include the following DNS entry: 8.8.8.8
For further info, please see this (dated) issue which provided the answer given here.
I ran into this problem running Docker on my MAC(host) with Docker VM in VBOX 5.10. It is a networking issue. The simple fix is to add a bridged network to the VBOX image. You can use the included NAT config present with the VM, but you need to change the ssh port from 50375 to 2375.
sudo service docker stop
sudo service docker start
works for me..
somehow, sudo service docker restart didn't work
(RHEL7)
On Windows 7 and if you believe you are behind proxy
Logon to default machine
$ docker-machine ssh default
Update profile to update proxy settings
docker#default:~$ sudo vi /var/lib/boot2docker/profile
Append from the below as appropriate
# replace with your office's proxy environment
export"HTTP_PROXY=http://PROXY:PORT"
export"HTTPS_PROXY=http://PROXY:PORT"
# you can add more no_proxy with your environment.
export"NO_PROXY=192.168.99.*,*.local,169.254/16,*.example.com,192.168.59.*"
Exit
docker#default:~$ exit
Restart docker machine
docker-machine restart default
Update environment settings
eval $(docker-machine env default)
Above steps are slightly tweaked but as given in troubleshooting guide: https://docs.docker.com/toolbox/faqs/troubleshoot/#/update-varlibboot2dockerprofile-on-the-docker-machine
I ran into this exact same problem yesterday and none of the "popular" answers (like fixing DNS to 8.8.8.8) worked for me. I eventually happened across this link, and that did the trick ... https://github.com/docker/for-win/issues/16
Between Docker for Windows, Windows 10 and Hyper-V, there seems to be a problem during the virtual network adapter creation process. Specifically, you might end up with two "vEthernet (DockerNAT)" network adapters. Check this with Get-NetAdapter "vEthernet (DockerNAT)" (in an elevated PowerShell console). If the result shows more than one adapter, you can disable and rename it with:
$vmNetAdapter = Get-VMNetworkAdapter -ManagementOS -SwitchName DockerNAT
Get-NetAdapter "vEthernet (DockerNAT)" | ? { $_.DeviceID -ne $vmNetAdapter.DeviceID } | Disable-NetAdapter -Confirm:$False -PassThru | Rename-NetAdapter -NewName "OLD"
Then open up Device Manager and delete the disabled adapter (for some reason you can do this from here, but not from the Network and Sharing Center adapters view).
I assume that you have a network problem. Are you behind a proxy? Is it possible that it filters the connection to docker.io or blocks the docker user agent?
I installed the toolbox and ran your test. It works fine, here:
docker is configured to use the default machine with IP 192.168.99.101
For help getting started, check out the docs at https://docs.docker.com
bash-3.2$ docker run hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
535020c3e8ad: Pull complete
af340544ed62: Already exists
library/hello-world:latest: The image you are pulling has been verified. Important: image verification is a tech preview feature and should not be relied on to provide security.
Digest: sha256:d5fbd996e6562438f7ea5389d7da867fe58e04d581810e230df4cc073271ea52
Status: Downloaded newer image for hello-world:latest
Hello from Docker.
This message shows that your installation appears to be working correctly.
To generate this message, Docker took the following steps:
1. The Docker client contacted the Docker daemon.
2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
3. The Docker daemon created a new container from that image which runs the
executable that produces the output you are currently reading.
4. The Docker daemon streamed that output to the Docker client, which sent it
to your terminal.
To try something more ambitious, you can run an Ubuntu container with:
$ docker run -it ubuntu bash
Share images, automate workflows, and more with a free Docker Hub account:
https://hub.docker.com
For more examples and ideas, visit:
https://docs.docker.com/userguide/
bash-3.2$
On Windows 10. Just right-click on the systray docker icon-> Settings... -> Rest -> Restrart Docker
I had this same problem with boot2docker and fixed it by restarting it with:
boot2docker restart
I just ran into this today with 1.10.1 and none of the existing solutions worked. I tried to restart, upgrade, regenerate certs, ...
I noticed that I had a lot of networks created on the machine. After removing them with:
docker network ls | grep bridge | awk '{print $1}' | xargs -n1 docker network rm
The DNS started working again.
Note: You may ignore errors about pre-defined networks
If you are behind proxy it is not enough to set HTTP_PROXY and HTTPS_PROXY env. You should set it while machine creation.
Paramer for this is --engine-env:
docker-machine create -d "virtualbox" --engine-env HTTP_PROXY=http://<PROXY>:<PORT> --engine-env HTTPS_PROXY=<PROXY>:<PORT> dev
In my case, installing docker on Alpine Linux I get the error:
Network timed out while trying to connect to https://index.docker.io/v1/repositories/library/........
Using the script here:
https://github.com/docker/docker/blob/master/contrib/download-frozen-image-v2.sh
Works. It downloads the image using curl and then shows you how to untar and 'docker load' it.
I tried the above methods of static DNS at 8.8.8.8 and disabling ipv6 (I didn't understand the proxy thing) and none of them worked for me.
EDIT 9/8/2016:
I was initially using dropbear instead of openssh. Reinstalled Alpine with openssh fixed the problem.
The next problem was 'ApplyLayer exit status 1 stdout: stderr: chmod /bin/mount: permission denied' error during pull.
From (nixaid.com/grsec-in-docker/):
To build the Docker image, I had to disable the following grsec
protections. Modify the /etc/sysctl.d/grsec.conf as follows:
kernel.grsecurity.chroot_deny_chmod = 0
kernel.grsecurity.chroot_deny_mknod = 0
kernel.grsecurity.chroot_caps = 0 # related to a systemd package/CAP_SETFCAP
in alpine's case though it's
/etc/sysctl.d/00-alpine.conf
reboot
Restarting Docker or recreating the image did not help. I rebooted Windows to no avail.
Astoundingly, when I ssh'ed into the running container and did curl https://index.docker.io/v1/repositories/library/hello-world/images I got a perfectly valid response.
I used the Docker Toolbox with VirtualBox on 64bit Windows 10 Pro.
The solution in my case was to uninstall the old Docker version and install the new one that uses Hyper-V instead of VirtualBox.
Now Docker works again.
If you are behind proxy kindly use below commands
sudo mkdir /etc/systemd/system/docker.service.d
sudo cd /etc/systemd/system/docker.service.d
sudo vi http-proxy.conf
[Service]
Environment=HTTP_PROXY=http://proxy-server-ip:port" "NO_PROXY=localhost,127.0.0.1"
sudo systemctl daemon-reload
sudo systemctl show --property=Environment docker
sudo systemctl restart docker
Try this if you can fetch latest ubuntu
sudo docker run -it ubuntu bash
Unable to find image ubuntu:latest locally
latest: Pulling from library/ubuntu b3e1c725a85f: Pull complete
4daad8bdde31: Pull complete
63fe8c0068a8: Pull complete
4a70713c436f: Pull complete
bd842a2105a8: Pull complete
Digest:
sha256:7a64bc9c8843b0a8c8b8a7e4715b7615e4e1b0d8ca3c7e7a76ec8250899c397a
Status: Downloaded newer image for ubuntu:latest
It worked for me finally :)
Another scenario: if your docker network adapter is disabled, it will fail with this error. The adapter is named "vEthernet (DockerNAT)" or similar. Apparently this adapter is involved somehow in the normal docker pull behavior. Enable it back to solve the problem.
Create a systemd drop-in directory for the docker service:
$ sudo mkdir -p /etc/systemd/system/docker.service.d
Create a file called /etc/systemd/system/docker.service.d/http-proxy.conf that adds the HTTP_PROXY environment variable:
[Service]
Environment="HTTP_PROXY=http://proxy.example.com:80/"
Hope it helps
refer to https://docs.docker.com/network/proxy/
for me, proxy setting without http:// or https:// prefix works.
e.g:
PROXY:PORT
or with / suffix with http:// or https:// prefix
e.:
http://PROXY:PORT/
On Windows this happened when I moved from a work network to a home network.
To solve it, run:
docker-machine stop
docker-machine start
docker-env
"C:\Program Files\Docker Toolbox\docker-machine.exe" env | Invoke-Expression