iOS: Segue issue while following Apple's tutorial - ios

I'm following the "personality quiz" guided project from Apple's book "App development with Swift".
The guide had me create several view controllers and a bunch of labels and a buttons so far. Then it came to creating segues. TLDR of the instructions is:
Control-drag from the button in the first VC to the the second VC and create a show segue.
Control-drag from the VC icon above the second VC to the third VC and create a show segue. Embed the second VC in a Navigation Controller. Create a modal segue from the first VC's button to the Navigation Controller.
Now, here
is the result as shown in the book (last VC missing from in the frame)
on the other hand is what I ended up with.
What could be the problem?
Thank you.
EDIT: Yes, I am using Xcode 11 while the guide shows Xcode 10.
To further explain my actual problem - If I understand it correctly, I ended up with a "modal presentation" while the book wants to have a "right to left push".

The screenshot from the tutorial is not taken in Xcode 11 (Probably Xcode 10). You seem to be using Xcode 11, which shows the VCs as if they are in iOS 13. Xcode 10 shows them in iOS 12, so of course they are going to look different.
Don't worry if your actual result doesn't exactly match the result shown in the tutorial, unless it doesn't actually work. If it's just aesthetic differences like this, it is very normal because the tutorial is using a different version of Xcode. The important thing here is that your first VC should present a second VC that is a UINavigationController. If you run the app and it does present it, then it's working correctly. iOS 13 just presents it a little differently than iOS 12.
If you want to achieve the full-screen VC look, select the segue between the first VC and the navigation controller, and change "Kind" to "Present Modally" and "Presentation" to "Full Screen".

Related

iOS 8 Navigation Bar Not Accessible in Second ViewController on Storyboard

I am new to iOS development and have not tried this programmatically yet. I would prefer to get this working in a storyboard.
I'm following this somewhat outdated tutorial from XCode 4.5 in XCode 6.1 to create a series of views connected by one navigation controller.
http://youtu.be/rgd6mCuzlEc
Once I create the second view controller, I am unable to double click the navigation bar to change the name and I am unable to add a bar button to it.
I have a Segue going from bar button "Item" from view 1 to 2. Notice in the "View Controller Scene" there is no navigation item. If I add any elements to the view controller they fall under "View" and not under "View Controller", unlike view controller 1 where it falls under "one".
Is this a limitation on XCode? Am I using the wrong Segue (Show)? Is there a hidden setting or customization I'm missing?
I actually have this working for 2 view controllers and failing the 3rd in a separate project but I don't know what I did to do that so I'm pretty sure it's possible I just cannot reproduce..
EDIT: Workaround Instead of the new adaptive SHOW segue, use the deprecated PUSH segue, add the bar button items, then change back to the adaptive SHOW segue.
Try adding a Navigation Item to the controller and it should work properly

'Show' segue in Xcode 6 presents the viewcontroller as a modal in iOS 7

I have two view controllers in my iPhone application (built with swift) built with Xcode 6.1 and uses storyboards.
The first view controller is embedded in a navigation controller in the storyboard and the segue for the second view controller is a 'Show' segue.
When the application is run, it properly shows the transition as a push in iOS 8.x, but in iOS 7.x it appears as a modal without the navigation bar.
My application requirement is to show the transition as a push regardless of whether it's iOS 7 or iOS 8. Any ideas to get this working as push in both versions of the iOS?
I saw a related post where this issue is mentioned, but could not find a solution to the problem: Adaptive segue in storyboard Xcode 6. Is push deprecated?
Any help is appreciated...
Thanks
This solution is different from the others in the following ways:
It includes a method to examine and verify the issue
The cause of the issue is traced to the source (a change in the segue type)
The solution is very simple (delete and recreate a new segue)
Please note the requirements in the text
I just gave a very detailed SO answer that fully explains what is happening and why, but the simple solution is you can delete the Segue that is not pushing and then recreate it on the storyboard. The reason is that there is likely a broken bit of xml in the segue (see extended answer for example/instructions how to confirm this issue).
After you confirm that you have at least one UINavigationController within the view hierarchy, be sure that the segue is NOT a manual segue and does NOT have an action associated with it (by viewing the segue in the storyboard as Source Code). Delete the existing segue and then Ctrl-drag from a UIView/UIControl to the target view controller and if custom action is needed intercept the call to destination controller in prepareForSegue.
Also to confirm that this solution works for you please do the
following:
Verify that your initial view controller (with the arrow on it) is a
UINavigationController and that it has a normal content view
controller as it's root view controller. (or that you embed your
initial view controller inside of a UINavigationController)
Read my extended comments on an earlier response to a very similar question (linked above).
It's possible that you have assigned the Initial View Controller to your UIViewController instead of the UINavigationController. Also, select your UIViewController and check that the "Is Initial View Controller" option is unchecked.
Here is the workaround for that. It looks like a bug in Xcode for iOS 7. You need to create a dummy UINavigationController and link all your free UIViewControllers to this navigation controller. Worked for me.
For me, my storyboard lacked a navigation controller. I am creating the navigation controller programmatically, which works fine in iOS8, but not iOS7.
SOLUTION
In your storyboard, select the main view controller and in the Xcode menu, choose Editor > Embed In > Navigation Controller.
Select the new navigation controller, and in the attributes inspector on the right, under View Controller, make sure Is Initial View Controller is checked.
Run the app. Should be fixed now.
I believe this is a bug in Xcode 7.2. In order to workaround, you can create a "Push (deprecated)" segue and then in the Storyboard editor, select the segue and change it to Show(e.g. Push)
I have had this exact issue with "Show (eg. Push)" for ages and I have just figured it out whilst trying to push a view controller onto a navigation controller that is in a Popover. It seems that the context of the called View Controller is the problem. So this is how I resolved it:
On the View Controller performing the Segue, check the "Defines Context" property in the Storyboard.
In the called View Controller, set the Presentation property to "Current Context".
I ran into this problem and the only solution I found that works for me is to use the deprecated 'Push' segue.
I am using XCode 9 with Swift 4. Note this version came out yesterday (September 20th).
For me this was just a caching bug. I had to choose "Present Modally", run the app and then choose "Show (e.g. Push)". Now everything works fine.
Basically the answer of Jomafer is partly correct. The controller which you are pushing needs to be preceded by a UINavigationController. You dont really need to push the UINavigationController at all. As long the storyboard knows its within a UINavigationController, all is well.
When a "Show" segue comes up as a modal segue in testing it is usually one of two problems:
The first view controller is not inside a navigation controller.
The storyboard XML is corrupted.
The solution to #2 is usually to remove and replace the segue, and it should correct itself. Sometimes just switching to some other presentation style, running, and switching back to "Show" fixes it.
This can also happen to "Show Detail" segues, and it can be more insidious.
Example:
I have a series of view controllers arranged in a UISplitViewController. They have segues Show->Show->Show->Show Detail. The last segue kept coming up modal. I tried everything to fix that last segue. The problem was that the upstream Show segue had been corrupted into a Show Detail segue (even though the storyboard still said it was a Show segue). I had been testing on iPhone, and I did not discover the real problem until I ran it on the iPad simulator. The segues were now Show->Show->Show Detail->Show Detail. On the iPhone the third segue looked just like a Show because it collapsed onto the navigation controller. However, it is still the detail view controller, and you cannot have a Show Detail from a detail view controller, so the OS does what it can to get your view controller on screen and displays it modally.
Lesson 1: Always test your UISplitViewController on iPad to make sure the segues are doing what you think.
Lesson 2: If your segue is coming up modal unexpectedly, check the upstream segues for corruption as well as the segue in question.
Problem in my case was that I created Show (e.g. Push) segue before putting ViewController as rootViewController of UINavigationController. In other words I didn't have UINavigationController.
Then I deleted seque, added UINavigationController and added seque again and it worked. Tested on Xcode 9.0.1 / iOS 11.0.3.

Xcode 6 Segue with UINavigationItem

I've just created a Segue from a ViewController (which is embedded in a UINavigationController) to another ViewController. It seems like that the new Segue types do not create the UINavigationItem (which contains the title label) on Segue creation as the push Segue type did in iOS 7. I've noticed this fact because I couldn't enter any title for the "new" ViewController after I created the Segue. There is also no place where I can properly place a bar button item.
I couldn't find anything regarding this fact in the Segue documentation so I was wondering if the UINavigationItem isn't automatically being created anymore. It doesn't even show up in the document outline. Does somebody know something about that? Maybe it's just a Xcode Beta 3 issue?
Here is a picture of the segue in the attributes inspector:
It seems like a bug, it normally fixes it self after restarting Xcode but quick fix is just to drag a navigation item from the object library onto the view controller.

View Controller in the "More" tab doesn't rotate, but it will if it's on the home row.

I have an app built in storyboard that needs to support landscape mode in just one view controller. I decided to support iOS 6 after some issues with supporting iOS 5 and running iOS 6 on my phone. I used this Stack Overflow answer: https://stackoverflow.com/a/12505461/1050388 but I'm still seeing a weird quirk. (For those interested, my controller scheme is Tab Controller -> Navigation Controller -> TableViewController -> UIWebView. The UIWebView is the only VC I need to rotate.)
I blocked all but one VC from turning, but that VC is in the "More" tab. I initially had a quirk where this "More" VC would change orientation to landscape when rotated and then any subsequent VC would be in landscape, but I found this (https://stackoverflow.com/a/12526152/1050388) and creating a category for UINavigationController helped to solve that issue.
However, when I navigate to that tab in the "More" list, and turn the VC, it doesn't rotate. But when I click "Edit" and move that tab to the home row of the initial 4 tabs, it rotates just fine. If I move it back, it doesn't rotate. Anyone have an idea why this is happening?
I believe the problem stems from the fact that the More navigation controller is generated dynamically by iOS and is read-only.
http://developer.apple.com/library/ios/#documentation/UIKit/Reference/UITabBarController_Class/Reference/Reference.html#//apple_ref/occ/instp/UITabBarController/moreNavigationController
It would be great if the technique of using a custom category would work here but based on your experience I guess it doesn't.
I also need better control of orientations for More tab views. Please post anything you come up with. Thanks.

Page-based App, UINavigation Controller, Similar to iOS Calendar

I want to do use the Apple template for a Page-based App (Xcode 4.4.1, iOS 5) and then be able to "push" pages from the page view...
Create a Page-based App
Add a button to Data View -> view -> view (The nested view)
Add a "Push" segue to a new Controller/View
Expect when the button is pressed that it will "Push" to the new view.
But it doesn't, and I don't know how to make it happen. I assume I need a UINavigationController somewhere, but I'm not sure where and how to insert it.
Note: I can use a modal segue which does what is expected, but not a push segue.
Thanks.
I found the answer, and it was one of the two obvious choices. I added a navigation controller in front of the RootViewController.
I think I missed it originally because Xcode keep crashing so I assumed it wasn't going to work.

Resources