I am trying to push my patches to a Gerrit server, I've generated a SSH key and added to the Settings. However, when I'm trying to push(repo upload), it shows another username so I don't have permission to push.
I've tried using git config to set my username but not working at all.
Performed ssh -vv -p 29418 genesis331#gerrit.aospa.co it works but not ssh -vv -p 29418 cheah3838#gerrit.aospa.co.
Btw my email is cheah3838#gmail.com maybe it is an important information?
In the console,
cheah3838#gerrit.aospa.co: Permission denied (publickey).
fatal: Could not read from remote repository.
But actually should be genesis331#gerrit.aospa.co.
You need to configure your Git config for repo upload
$ git config --global review.gerrit.aospa.co.username genesis331
The repo documentation may help you if you need more information:
$ repo help upload
[...]
review.URL.username:
Override the username used to connect to Gerrit Code Review. By default
the local part of the email address is used.
The URL must match the review URL listed in the manifest XML file, or in
the .git/config within the project. For example:
[remote "origin"]
url = git://git.example.com/project.git
review = http://review.example.com/
[review "http://review.example.com/"]
autoupload = true
autocopy = johndoe#company.com,my-team-alias#company.com
[...]
Related
I'm trying to configure flow which include git repository
things to note:
i have a git server running in internal network
my jenkin running on one of the machine in the network so it can access git server through local ip
normally i would go like this with my git command
git remote add origin ssh://username#git-server-ip/path-to-folder
after that it prompt me to type in the password for the above username
and i can work on the git repo like normal
The problems:
in Jenkin i already set up credential with "username and password" type
When i paste in the ssh url into the Repository URL, it take a while and return error:
Failed to connect to repository ...
stdout: stderr: Permission denied, please try again. Permission
denied, please try again. username#git-server-ip: Permission denied
(publickey, password). fatal: Could not read from remote repository.
Please make sure you have the correct access rights and the repository
exists.
i had selected credentials and double check username and password it's correct. i tried running the ls-remote command manually in the terminal
git ls-remote -h -- ssh://username#git-server-ip/path-to-folder HEAD
it prompts to input the password, i typed it in and it run normal without error
Why is the error only happens on Jenkins when i input the repo ssh url? is username and password credential the wrong approach for credential? what else should i use?
there no guide online for Jenkin with internal git ssh url as i known of
the closest i can see my problem related to is this question Jenkins Git ssh setup does not let me use username/password , but it doesn't have an accepted answer yet, and the answer suggest going with "ssh username and private key"
This may seem like a bit of a rudimentary issue, but I cannot seem to push from Sourcetree (windows) to a bitbucket repo for which my user is the owner.
To clarify I can log in to the repo using my browser just fine but when I push to it from Sourcetree and I enter the same details into the prompt box it fails to authenticate. I have tried using the username and email, I've even changed the password of the account but still no joy.
I also created an app password and tried using that as the password with combinations of the username and email, but no joy.
the error I am getting is:
git -c diff.mnemonicprefix=false -c core.quotepath=false
--no-optional-locks -c credential.helper= -c credential.helper="C:/Users//AppData/Local/ATLASS~1/SOURCE~1/GIT_EX~1/GIT-CR~1.EXE"
push -v --tags origin master:master fatal: HttpRequestException
encountered. An error occurred while sending the request.
remote: Invalid username or password. If your organization manages
your account or you've enabled two-step verification, create an app
password to log in: https://confluence.atlassian.com/x/9DJmMQ fatal:
Authentication failed for
'https://#bitbucket.org//.git/'
Pushing to https://#bitbucket.org//.git Completed
with errors, see above.
Any advice would be greatly appreciated
Try to add a new SSH key via Sourcetree, seems like Sourcetree is not picking up your username and password when you are using HTTP/S authentication, it can be because:
You have not added your account info in git global
You have not properly assigned credentials
Using SSH is a far preferred way:
https://confluence.atlassian.com/bitbucket/set-up-an-ssh-key-728138079.html#SetupanSSHkey-ssh3
I deleted:
C:\Users\USERNAME\AppData\Local\Atlassian\SourceTree\passwd
C:\Users\USERNAME\AppData\Local\Atlassian\SourceTree\accounts.json
Inspired by this article: https://community.atlassian.com/t5/Sourcetree-questions/Getting-quot-fatal-Authentication-failed-for-quot-error/qaq-p/624663
It worked. When I restarted SourceTree it acted like it was the first time it was opened (downloaded some tools, asked me for my credentials). Once it finished, my project tabs were there, and I was able to pull/push.
Perform below steps:
Reset your password : https://id.atlassian.com/manage/change-password
Run below command from working copy
git remote set-url origin Your-repository-url-here
In order to get it worked I ended up going to Tools -> Options -> SSH Client configuration and changing it to OpenSSH. and set the path to the already generated ssh key file like C:\Users<user>.ssh\id_rsa.
when I am trying to clone a rails app repo I have got permission to, I am getting this issue.
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Even after adding public key by generating one, I am unable to solve this.
Although I am able to clone using he https method but after making changes, the same error comes while I try to push the code.
Please suggest an answer for this.
First, cd into your .ssh directory. Open up the terminal and run:
cd ~/.ssh && ssh-keygen
Second, you need to copy this to your clipboard:
cat id_rsa.pub | pbcopy # On OSX
cat id_rsa.pub | xclip # On Linux
Third, add your newly generated ssh key to your account via the github/bitbucket website (just paste there).
Next, setup your git config:
git config --global user.name 'your_user_name'
git config --global user.email 'your_email'
Finally, restart your command line to make sure the config is reloaded.
Now, you should be able to clone and push from/to your github repository.
For more information on this, see this github page or this bitbucket page.
When attempting to clone, push, or pull over SSH with Git, you may receive one of these messages if Bitbucket couldn't authenticate with the keys that your SSH agent offered.
Here are the most common reasons why you may see these messages:
You used sudo when attempting the connection
You shouldn't use sudo when cloning, pushing, or pulling because the ssh-agent runs on the user level, not the root level.
Your public key isn't loaded into Bitbucket
To check if your public key is loaded into Bitbucket, do the following:
From Bitbucket, choose Personal settings from your avatar in the lower left.
The Account settings page displays.
Click SSH keys.
The SSH keys page shows a list of any existing keys.
If you don't have any keys listed, you can follow our Set up an SSH key documentation to set one up.
Your key isn't loaded into your SSH agent
If your SSH agent doesn't know to offer Bitbucket a key, the connection fails. You may run into this issue if you've recently restarted your system.
You can refer to this Article for more informations:
https://support.atlassian.com/bitbucket-cloud/docs/troubleshoot-ssh-issues/
Check few things.
Is the generated new key is the one your ssh agent using when trying to ssh to server.
(Your ssh agent might be using a different key than the one you generated)
use this to list currently loaded keys by agent.
ssh-add -L
You properly added public key to your repository hosting location.
The keys corresponding to above 1 and 2 should match.
Please see this article: GitHub: Generating SSH Keys. What happens when you run:
ssh -T git#bitbucket.org
?
You may have added the wrong key to authenticate with.
I faced this error when I created another repository in my local. My ssh-keys were already set up and I was trying to push code through vs code.
The issue got resolved when I git push-ed through git bash like I was doing before.
For bit bucket I think I have tried everything with ssh. I have tried the answer from this stackoverflow question as well. But it doesn't work. So finally I just changed the clone command from SSH to HTTPS and it worked. Only then it asked for password for my account.
The first time I unloaded a site on Heroku I faced many mistakes. How to correct?
k#k-Aspire-5750G:~/q$ git clone git#github.com:priroda/programmer-site
Cloning into 'programmer-site'...
The authenticity of host 'github.com (192.30.252.131)' can't be established.
RSA key fingerprint is 16:27:ac:a5:76:28:2d:36:63:1b:56:4d:eb:df:a6:48.
Are you sure you want to continue connecting (yes/no)?
Host key verification failed.
fatal: The remote end hung up unexpectedly
I have 2 files in directory ssh:
k#k-Aspire-5750G:~/.ssh$ ls
id_rsa id_rsa.pub
ssh
Your problem here looks like you're trying to ssh into heroku and clone your repo directly from github?
The problem here is that if you connect to github through ssh (a third party), you will basically have to create an authenticity token (ssh key), so that your third party machine is able to connect to your github repo
--
Fix
Typically, your local machine will be authenticated anyway when you install git, heroku not so. I would therefore recommend you push to Heroku from your local machine, rather than trying to clone through github:
$ git remote add heroku git#heroku.com
$ git add .
$ git commit -a -m "Heroku Deploy"
$ git push heroku master
If you do this first time, you will likely come back with some sort of request for your ssh to be accepted or something - just accept & it should push to Heroku from your local machine
Here is Heroku's take on the matter
Your output looks like a problem with your host verification with Github.com when you're trying to clone and nothing to do with Heroku.
Have a look in your ~/.ssh/known_hosts for a github.com entry and highlight it and remove it. Then try your clone again and it will prompt to verify, say yes and then it should clone successfully.
I am following the ruby.railstutorial. I run the command "git push heroku master" and it spits out this error.
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
I am inside my rails app "/Users/lexi87/rails_projects/first_app". Any solutions?
The best way to avoid such errors is to use one public/private key pair and not an extra key for heroku. This way you (or your system) can't choose a wrong key to login in heroku.
If you get this error, you have done something wrong. Check this site: https://devcenter.heroku.com/articles/keys
If you geht this error, the best way is to remove unnecessary keys and use only one.
If you need more than one key pair on your system, you can set one key for heroku. This is done through the following command:
heroku keys:add
Some help for Windows 7 users with Github Windows client installed:
Even though heroku toolbelt reports it found my git_hub public key and uploaded it, 'git push heroku master' failed. After taking the steps below, it works fine.
Create .ssh folder under your User folder if one does not exist. If
it does, delete all files in it (this assumes you are OK with starting from scratch with ssh keys).
In Windows Explorer, right click the
.ssh folder, and choose Git bash from the context menu. This is installed along with the Github Windows client software.
In the bash window enter
ssh-keygen -t rsa -C "yourname#email.com" When prompted enter a
passphrase (don't lose this).
Close the bash shell window.
From a cmd prompt in your project's root, enter heroku keys:add.
This will find and upload the key you just created from your /.ssh file to
Heroku.
Now you can enter git push heroku master to push you app up to Heroku.
Note: you will need to add your newly generated ssh public key to your Github account when done.
I faced the same issue. In my .ssh folder I had a file called 'Known Hosts'. I kept trying to delete and create new ssh keys it did not work. In the end I just deleted everything in .ssh including 'Known Hosts' and then created a new rsa key using:
ssh-keygen -t rsa
then I added this new key to heroku using:
heroku keys:add
then create a new heroku repo and pushed my app to it:
heroku create
git push heroku master
ssh-keygen -t rsa
Above is optional as you could also link to an existing key. Heroku will prompt to select the key in the next step.
heroku keys:add
Add your newly created key or an existing one. If you are still running into the issue, you will most likely need to add the key to your machine's list of ssh keys by performing the following:
ssh-add ~/.ssh/name_of_your_rsa
and confirm that your ssh has been added
ssh-add -l
This should get you access to push to Heroku's remote repo.
on OSX, I was having experiencing the same issue, I was getting
no such identity: /Users/me/.ssh/yourPrivateKey: No such file or directory
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
I tried to create a new key with ssh-keygen -t rsa then adding it with heroku keys:add, but it didn't help.
Then I found a file named config in ~/.ssh/, and inside the file there was:
ServerAliveInterval 300
ServerAliveCountMax 3
host heroku.com
user git
hostname heroku.com
identityfile ~/.ssh/yourPrivateKey
So I changed yourPrivateKey to my private key filename (id_rsa by default) aaand it worked :)
I created a key with
ssh-keygen -t rsa
and used a different filename than id_rsa (in my case heroku). I added the key to heroku with
heroku keys:add
On trying to push my master branch to heroku I always received the following error:
$ git push heroku master
The authenticity of host 'heroku.com
(50.19.85.132)' can't be established. RSA key fingerprint is
8b:48:5e:67:0e:c9:16:47:32:99:87:0c:1f:c8:60:bb. Are you sure you want
to continue connecting (yes/no)? yes Warning: Permanently added
'heroku.com,50.19.85.132' (RSA) to the list of known hosts. Permission
denied (publickey). fatal: Could not read from remote repository.
Please make sure you have the correct access rights and the repository
exists.
As I noticed git only used my id_rsa key from another ssh-access (you can check that via your git gui: Help -> SSH keys).
I renamed my .ssh directory C:\Users\%username%.ssh to .ssh.bak and copied my heroku private and public key (from the .ssh.bak directory) to a newly created .ssh directory and named it id_rsa (and id_rsa.pub).
Now pushing worked as expected:
git push heroku master
If you are working on Windows, be sure to use git-bash instead of Powershell/Command Prompt.
If you just want to reset your ssh keys:
delete your user's .ssh dir
open git-bash
ssh-keygen -t rsa
heroku keys:add
and then you will be able to git push.