I ran a build yesterday, hoping I would read some logs today.
I came today, and got an error 404 when trying to access the build. Strange.
Running another build, shows my build actually did run, but it is unreachable.
Is there a way to get my hands on the logs?
Notice build #10 is missing, even though it did start.
Probably a windows update is to blame for this.
The broken link is http://192.168.80.10:8080/job/Dev_git/10
More information on a run can usually be found using the context menu under Console Output. This is only accessible if you have the correct permissions set in Jenkins.
This of course does not work, if a build is missing. One reason could be that your Jenkins is configured in a way that only a certain number of historic builds are kept, see Build History Missing in Jenkins for an explanation how to deal with that.
However, your case seems to be different, because a build in the middle of the history is missing. For this, I suggest to look around in the jobs directory of your Jenkins installation where it stores all the configuration and run data.
References
https://wiki.jenkins.io/display/JENKINS/Administering+Jenkins
Where does Jenkins store configuration files for the jobs it runs?
Related
I'm new to Travis. The user docs are fantastic and I had little trouble getting my little project to build. But how do I get at the thing that was built? Can I?
The build log shows my binary getting linked, but I see no way to access it.
I'm not interested in automating deploys or uploads, I just want to see what was produced.
Any artifacts from builds are purged after a successful build, together with the build environment. Travis CI isn't explicitly storing them for you, but can be convinced to do so: http://docs.travis-ci.com/user/uploading-artifacts/
I'm using Jenkins v1.546, hosted on a Windows Server 2008 R2 SP1 machine.
I've set up a fairly simple job for building a Maven Java project. It polls the SCM with no schedule and picks up remote build triggers, requiring an authentication token. It uses Subversion and performs clean checkouts with svn update. Additionally, it has a post-build step that archives some build artifacts (i.e., the resulting WAR and WSDLs).
The issue I'm experiencing is that the builds that it stores on the filesystem itself contain invalid characters in their filenames. This causes our automatic backup process to blow up, it being unable to alter or remove those directories/files with the '$'. I myself cannot move/delete those folders or files either, but if I rename it and remove the $, then things work fine. Oh, and if I try to follow one of these links with the $ in it, it doesn't resolve. None of the other jobs seem to do this - just my job, of course. Anyone know why this may be occurring and what I can do to resolve this?
I've attached multiple screenshots that show the bad filename and my Jenkins job setup. I had to white out some company information. If I can provide any additional information to help troubleshoot this, just let me know.
Also, as an update, I did some additional research, looking through the changelogs for each released version of Jenkins since my version (latest is 1.557). I saw three possible issues in the changelogs that could be related, but it's hard for me to tell. I cannot simply upgrade our Jenkins to test out this theory, since I'll need to provide a reason for upgrading beyond a hunch.
https://issues.jenkins-ci.org/browse/JENKINS-21023
https://issues.jenkins-ci.org/browse/JENKINS-20534
https://issues.jenkins-ci.org/browse/JENKINS-21958
The $ is a perfectly valid character in Windows directory name. You can manually make a folder with it, and delete it without any problems.
The com.company$moduleName syntax is used by Jenkins Maven-style job to separate modules of your build. If you don't see this structure for other people's jobs, it is because they are either not building a Maven job, or they don't have multiple modules in a single job.
What is strange though it that these are symlinks (I don't see that in my environment). It is possible that the location that is referenced by the symlink is deleted, but the link remains. In this case, you would not be able to navigate to that location through the link (this is what you are experiencing)
Is it possible that your backup software is deleting the target directories before deleting the links?
In any case, do a simple dir on the directory with the links to see what they link to. And then verify those target locations exists. If they don't, you need to figure out who/what is deleting the links' targets
Edit:
This seems to be more related to the issue that you are facing. Unfortunately, it's marked as "unresolved"
https://issues.jenkins-ci.org/browse/JENKINS-20725
The issue stems from the fact that the symlinks are referencing to targets with / instead of \
My Maven plugin (not Maven version) is 2.6. See if upgrading your Maven plugin in Jenkins will help you. Also, I am running Maven 3.2.2 from the automatic installers. Try with that, as I don't see symlinks in my modules.
I have a Jenkins Server (1.510) on Win 2008 with ~100 jobs.
After installing and then uninstalling the CloudBees (Plugin_1, Plugin_2) set of plugins + restart I have the following issues:
half of the Jobs are now missing.
many plugins are not functioning well, for example the green-balls plugin is not working and also the entry to launch the backup plugin is missing
many built in Jenkins buttons such the new "Credentials" is missing from the "Jenkins Configure" Menu.
Looking at the FS, i still see all the jobs.
I already tried :
Using the reload configuration
Reinstalling the plugins
Reinstalling Jenkins with the same version once again
Still the jobs are missing
Any idea how to solve it?
Thanks,
Doron
When job is loaded, many of the related Java classes get instantiated. If instantiation fails, usually because some plugin has been removed and that class is no longer available at all, then the job is hidden.
I suspect you have accidentally removed some other plugin too.
Note: Before actually doing anything, take full backup! Easiest is to backup entire Jenkins folder, where the jobs, configuration etc reside.
Easiest solution might be to just install Jenkins from scratch, install the plugins you do need (see below for troubleshooting if you're missing some), then copy the jobs subfolder to the new Jenkins. It might be best to do any configuration under Manage Jenkins by hand, but you can also just try copying the related XML config files.
If you are missing a plugin and can't figure out which one, you should look at jenkins.out.log and jenkins.err.log log files and search for exceptions happening after Jenkins is started. That may give you a clue on what plugin you are missing.
You can also try editing the job XML files to remove build steps you identified from the exceptions (remember to take backups first!), then restart Jenkins or select Reload configuration from disk from Manage Jenkins page.
If not solved, but you find relevant-looking exceptions or something else interesting, please update the question with details.
After I upgraded Jenkins, one of my jobs disappeared. I found out that although my job directory still existed, the config.xml file inside had somehow gone missing.
I restored this file from a backup, after updating all the plugins that needed updating, and reloaded the configuration, and the job reappeared in Jenkins.
I am on a redhat linux box. I recently updated Jenkins to version 1.509 only to find that after doing so it has "forgotten" two of my jobs/projects. The jobs can still be found on my Jenkins machine under /var/lib/jenkins/jobs, but they no longer show up in the Jenkins GUI. I attempted to re-create them based off the configuration file I have, but I am not confident I have totally re-created the functionality they had.
I also tried to copy the job and or rename it hoping that would get jenkins to see it, but no luck. I had tried cp -r /var/lib/jenkins/jobs/JOB1 /var/lib/jenkins/jobs/JOB2. I also restarted the service a number of times. Finally I updated all of my plugins on the off chance that was somehow related.
So my question is "How can I get Jenkins to notice these jobs?" or failing that "can I run these jobs from in the terminal?"
NOTE: I am not discouraging others from upgrading Jenkins. After I upgraded Jenkins did complain about a number of things which I didn't pay enough attention to which I believe got me into this mess in the first place.
If I were you, I would try the Jenkins CLI (from $JENKINS_URL/cli) and use the create-job command and feed the job configuration file to the cli's stdin.
If that does not help, I would inspect Jenkins log files (you are saving stdout and stderr of Jenkins somewhere, right?) for any errors or clues. If the job failed to load because of some tag that you can guess is provided by a plugin, try to remove that part from the config file.
If that does not help, I would upgrade Jenkins. I think there might be some fixes related to this in the LTS version changelog since 1.509.
And above all... if I were you, I would start making backups of the job configuration files.
I regularly back up the global config.xml, all the job config.xml files and all the plugins. Using these I can set up my Jenkins from scratch. And I do that to set up a test instance where I try any plugin or Jenkins core upgrade. If I see no problems after running a few of the trickiest builds, I know I can upgrade the production instance with much more confidence.
I am using Jenkins CI in my project, I am able to successfully build the project and I have no issues in deploying it in the container after every successful build. Now I have a condition that the deployment to the container has to happen only if there is a change in the release properties file. If there is no change in the release properties file then the project has to be built but no deployment should happen.
Since I am new to Jenkins I am trying out all the options, I am sure that someone must have been in the similar situation, please share your thoughts or ideas. Incase if I find something I will post it.
Highly Appreciate your help on this.
If this is still not answered!!
This can we easily done using Script Trigger plugin.
This allows you to run a shell/batch script and based on the exit code of this script the build will be executed.
You can keep track of the last modified date of the properties file and if it changed then you can go ahead and build, if not there will not be any build until the change happens.
Hope this helps (if at all required now ;)
You should install the "Post-Build Script Plug-in" in your Jenkins. The previous answer was mentioning a plugin that is no longer available.
Then you can add sub build steps, like executing a shell script
script
You can also publish a Docker container, etc.