I had created a docker container image for Business Central 2 months ago. Now when I try to start the container it starts with an unhealthy status and Business Central client doesn't work.
docker start <container-id>
I checked the logs that told me that I am trying to run a container which is more than 90 days old.
Initializing...
Restarting Container
PublicDnsName unchanged
Hostname is MyBCDev
PublicDnsName is MyBCDev
You are trying to run a container which is more than 90 days old.
Microsoft recommends that you always run the latest version of our containers.
Set the environment variable ACCEPT_OUTDATED to 'Y' if you want to run this container anyway.
at , C:\Run\navstart.ps1: line 54
at , C:\Run\start.ps1: line 121
at , : line 1
I googled the issue and all I can find is to use the docker run command with accept outdated parameter, but that creates a new container. Whereas I want to start the existing container.
docker run --env accept_eula=Y --memory 4G microsoft/dynamics-nav
How can I start an existing docker container that is more than 90 days old?
Update
I did the docker commit using the existing container and repository:tag. But when I ran the container (docker run) using the new image it got stuck somewhere in the middle
Try to set ACCEPT_OUTDATED=Y and start the container. If it doesn't worked then try this hack.
Make use of docker commit command.
docker commit container-id myimage:v1
This will create new docker image out of that stopped container with all the data and config in it.
Run a new docker container out of that image.
This new docker container will be almost same as that of stopped docker container that was 90 days old.
Hope this helps.
You should set ACCEPT_OUTDATED=Y
docker run -e ACCEPT_EULA=Y -e ACCEPT_OUTDATED=Y --memory 4G microsoft/dynamics-nav
Related
I have been running a nvidia docker image since 13 days and it used to restart without any problems using docker start -i <containerid> command. But, today while I was downloading pytorch inside the container, download got stuck at 5% and gave no response for a while.
I couldn't exit the container either by ctrl+d or ctrl+c. So, I exited the terminal and in new terminal I ran this docker start -i <containerid> again. But ever since this particular container is not responding to any command. Be it start/restart/exec/commit ...nothing! any command with this container ID or name is just non-responsive and had to exit out of it only after ctrl+c
I cannot restart the docker service since it will kill all running docker containers.
Cannot even stop the container using this docker container stop <containerid>
Please help.
You can make use of docker RestartPolicy:
docker update --restart=always <container>
while mindful of caveats on the docker version you running.
or explore an answer by #Yale Huang from a similar question: How to add a restart policy to a container that was already created
I had to restart docker process to revive my container. There was nothing else I could do to solve it. used sudo service docker restart and then revived my container using docker run. I will try to build the dockerfile out of it in order to avoid future mishaps.
I am trying to change the value of somaxconn in a running docker container. I am using this command:
docker run --net=container:redis --sysctl net.core.somaxconn=65535 bash
I have checked that this command changes the value of somaxconn from 128 to 65535 in the running docker container.
Because docker run command creates and starts a new container, so, does this command recreates and starts my existing conatiner? Does it restart my running container with the somaxconn changes or does it change the value in the running docker docker container?
But one thing I would like to add is that after running the above command, the value of somaxconn was changed and when I did docker ps, it showed that the same container was up and running from long time ago, so, does that mean it changed the value in an already running container?
docker run will always start a new container. If you already have a container running, it will not be affected by the docker run command.
You could look at the docker exec command. This allows you to execute a command in an existing container. However, this will not allow you to change the parameters with which the original container was started (e.g. changing the --sysctl param). To change these kind of parameters you must remove and recreate the container with the desired parameters.
See the docs for docker run and docker exec here:
https://docs.docker.com/engine/reference/commandline/run/
https://docs.docker.com/engine/reference/commandline/exec/
docker run command will always create a new container.
So you can do one thing. Execute following commands to change value in running container.
#>docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
80eb3dc8438b abcxyz "docker-entrypoint.sâ¦" 22 hours ago Up 22 hours abcxyzfriendlyname
Look for container-name or id (e.g. 80eb3dc8438b)
Then launch the following command : (Make sure your container is running at this moment).
#>docker exec 80eb3dc8438b sysctl net.core.somaxconn=65535
I am not sure whether it will persist data in the container or is it just available in session only.
based on Moving docker-compose containersets
I have loaded the images :
$ docker images -a
REPOSITORY TAG IMAGE ID CREATED SIZE
br/irc latest 3203cf074c6b 23 hours ago 377MB
openjdk 8u131-jdk-alpine a2a00e606b82 5 days ago 101MB
nginx 1.13.3-alpine ba60b24dbad5 4 months ago 15.5MB
but now i want to run them, as they would run with docker-compose, but i cannot find any example.
here is the docker-compose.yml
version: '3'
services:
irc:
build: irc
hostname: irc
image: br/irc:latest
command: |
-Djava.net.preferIPv4Stack=true
-Djava.net.preferIPv4Addresses
run-app
volumes:
- ./br/assets/br.properties:/opt/br/src/java/br.properties
nginx:
hostname: nginx
image: nginx:1.13.3-alpine
ports:
- "80:80"
links:
- irc:irc
volumes:
- ./nginx/assets/default.conf:/etc/nginx/conf.d/default.conf
so how can i run the container, and attach to it, to see if its running, and in what order do i run these three images. Just started with docker, so not sure of the typical workflow ( build, run, attach etc )
so even though i do have docker-compose yml file, but since i have the build images from another host, can i possibly run docker commands to run and execute the images ? making sure that the local images are being referenced, and not the ones from docker registry.
Thanks #tgogos, this does give me a general overview, but specifically i was looking for:
$ docker run -dit openjdk:8u131-jdk-alpine
then:
$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
cc6ceb8a82f8 openjdk:8u131-jdk-alpine "/bin/sh" 52 seconds ago Up 51 seconds vibrant_hodgkin
shows its running
2nd:
$ docker run -dit nginx:1.13.3-alpine
3437cf295f1c7f1c27bc27e46fd46f5649eda460fc839d2d6a2a1367f190cedc
$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
3437cf295f1c nginx:1.13.3-alpine "nginx -g 'daemon ..." 20 seconds ago Up 19 seconds 80/tcp vigilant_kare
cc6ceb8a82f8 openjdk:8u131-jdk-alpine "/bin/sh" 2 minutes ago Up 2 minutes vibrant_hodgkin
then: finally:
[ec2-user#ip-10-193-206-13 DOCKERLOCAL]$ docker run -dit br/irc
9f72d331beb8dc8ccccee3ff56156202eb548d0fb70c5b5b28629ccee6332bb0
$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9f72d331beb8 br/irc "/opt/irc/grailsw" 8 seconds ago Up 7 seconds 8080/tcp cocky_fermi
3437cf295f1c nginx:1.13.3-alpine "nginx -g 'daemon ..." 56 seconds ago Up 55 seconds 80/tcp vigilant_kare
cc6ceb8a82f8 openjdk:8u131-jdk-alpine "/bin/sh" 2 minutes ago Up 2 minutes vibrant_hodgkin
All three UP !!!!
Your question is about docker-compose but you also ask things about run, build, attach which makes me think I should try to help you with some basic information (which wasn't so easy for me to cope with a couple of months ago :-)
images
Images are somehow the base from which containers are created. Docker pulls images from http://hub.docker.com and stores them in your host to be used every time you create a new container. Changes in the container do not affect the base image.
To pull images from docker hub, use docker pull .... To build your own images start reading about Dockerfiles. A simple Dockerfile (in an abstract way) would look like this:
FROM ubuntu # base image
ADD my_super_web_app_files # adds files for your app
CMD run_my_app.sh # starts serving requests
To create the above image to your host, you use docker build ... and this is a very good way to build your images, because you know the steps taken to be created.
If this procedure takes long, you might consider later to store the image in a docker registry like http://hub.docker.com, so that you can pull it from any other machine easily. I had to do this, when dealing with ffmpeg on a Raspberry Pi (the compilation took hours, I needed to pull the already created image, not build it from scratch again in every Raspberry).
containers
Containers are based on images, you can have many different containers from the same image on the same host. docker run [image] creates a new container based on that image and starts it. Many people here start thinking containers are like mini-VMs. They are not!
Consider a container as a process. Every container has a CMD and when started, executes it. If this command finishes, or fails, the container stops, exits. A good example for this is nginx: go check the official Dockerfile, the command is:
CMD ["nginx"]
If you want to see the logs from the CMD, you can docker attach ... to your container. You can also docker stop ... a running container or docker start ... an already stopped one. You can "get inside" to type commands by:
docker exec -it [container_name] /bin/bash
This opens a new tty for you to type commands, while the CMD continues to run.
To read more about the above topics (I've only scratched the surface) I suggest you also read:
Is it possible to start a shell session in a running container (without ssh)
Docker - Enter Running Container with new TTY
How do you attach and detach from Docker's process?
Why docker container exits immediately
~jpetazzo: If you run SSHD in your Docker containers, you're doing it wrong!
docker-compose
After you feel comfortable with these, docker-compose will be your handy tool which will help you manipulate many containers with single line commands. For example:
docker compose up
Builds, (re)creates, starts, and attaches to containers for a service.
Unless they are already running, this command also starts any linked services.
The docker-compose up command aggregates the output of each container (essentially running docker-compose logs -f). When the command exits, all containers are stopped. Running docker-compose up -d starts the containers in the background and leaves them running
To run your docker-compose file you would have to execute:
docker-compose up -d
Then to see if your containers are running you would have to run:
docker ps
This command will display all the running containers
Then you could run the exec command which will allow you to enter inside a running container:
docker-compose exec irc
More about docker-compose up here: https://docs.docker.com/compose/reference/up/
I'm new to docker.
I have an image that I want to run, but I want docker to see if that image is already running from another terminal...if it is running I don't want it to load another one...
is this something that can be done with docker?
if it helps, I'm running the docker with a privileged mode.
I've tried to search for singleton docker or something like that, but no luck.
updates-
1.working from ubuntu.
My scenario- from terminal X I run docker run Image_a
from terminal Y I run docker run Image_a
when trying to run from terminal Y, I want docker to check if there is already a docker running with Image_a, and the answer is true - I want docker not to run in terminal Y
You can use the following docker command to get all containers that running from specific image:
docker ps --filter ancestor="imagename:tag"
Example:
docker ps --filter ancestor="drone/drone:0.5"
Example Output:
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
3fb00087d4c1 drone/drone:0.5 "/drone agent" 6 days ago Up 26 minutes 8000/tcp drone_drone-agent_1
This approach uses docker api and docker daemon, so it doesnt matter if the run command executed in background or other terminal.
Aother approach:
If you have a single container form a single image:
Try naming your containers, You cant have 2 containers with the same name:
docker run --name uniquecontainer Image_a
Next time you run the above command you will get an error. Btw consider using -d so you dont have to switch terminals.
docker run -d --name uniquecontainer Image_a
This question already has answers here:
How to continue a Docker container which has exited
(14 answers)
Closed 6 years ago.
A related question & answer on How to start a docker container (ubuntu image) suggest using docker run -it ubuntu to start a ubuntu container and connect to it. However the run command creates and starts a new ubuntu container.
How do we start an existing docker container (ubuntu image) given it's CONTAINER_ID without creating a new container?
Example:
docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9f297d02f419 ubuntu "/bin/bash" 3 seconds ago Exited (0) 1 seconds ago cranky_wilson
How do we start 9f297d02f419 ?
you can start the stopped container using docker start command -
eg:
docker start 9f297d02f419
If you just use run on the Ubuntu image it will start a container that's running no command, which will immediately stop. You can docker start it but it will stop again. You can see it with docker ps -a.
The accepted answer in that question is very old and not very good. If you run that command on the current Docker version you get an error No command specified!
What you need to do is tell that container to run a command:
docker run ubuntu date
Will run a container from the image, run the date command, then exit. If you want to keep it running indefinitely, try something like:
docker run -d ubuntu tail -f /dev/null
You should see that the container is now running. The -d makes it run in the background, otherwise it will occupy your shell. And the final piece of the puzzle: since we have a container now that's configured to run a command, you can use docker ps to find its ID, and you can docker stop and docker start it at will.