I am using three stages here , In this if my second stage Build fails it should skip the third stage copy. may i know how to use conditions here in pipeline job?
node('') {
stage ('clone'){
Build job : 'Job1'
}
stage ('Build'){
parallel(firstTask: {
stage ('Job2'){
build job: 'Job2', propagate: true
}
}, secondTask: {
stage ('Job3'){
build job: 'Job3', propagate: true
}
})
stage ('copy'){
build job: 'copy'
}
}
}
First and foremost you will need to declare stage under stages and not under node. As per default behaviour of pipeline, if a build fails in a stage, it will automatically skip next stages.
There are lot of options for using conditions in pipeline. One of the option I often use is when {}.
Here is an example-
Jenkinsfile (Declarative Pipeline)
pipeline {
agent any
stages {
stage('Example Build') {
steps {
echo 'Hello World'
}
}
stage('Example Deploy') {
when {
branch 'production'
}
steps {
echo 'Deploying'
}
}
}
}
For more details and options, refer this documentation - https://jenkins.io/doc/book/pipeline/syntax/
Related
I am working on a project with git and jenkins (pipeline).
I want to build the project at every commit but only deploy it when the chief wants.
So I would like to have like, two pipelines, one that run at every commit and only build / test and one that I can run by clicking on a button labelled "click me to deploy" that do the job.
Do I must create 2 jenkins jobs or is there a plugin or a way to do this with 1 job.
I have searched but I found nothing about this.
You can achieve with 1job using Input Step (Pipeline). As part of your pipeline, after the build and test execution, add input step (Wait for Interactive input) and then add the deployment related stages.
So for each check-in, Jenkins build will trigger. But it will complete only build and test stages after that it will wait for chief approval to proceed for deployment.
reference: https://jenkins.io/doc/pipeline/steps/pipeline-input-step
This is an example on how to build a pipeline that builds, waits for input, and deploys when input is yes. If input timeout is exceeded then the job will exit. If one does not need the timeout then it can be ommited and the pipeline will wait indefinately without consuming an executor (note the agent annotation in the top pipeline and in each stage)
pipeline {
agent none
stages {
stage('Build') {
agent { label 'master' }
steps {
sh 'build something'
}
}
stage('Production deploy confirmation') {
options {
timeout(time: 60, unit: 'SECONDS')
}
input {
message "Deploy to production?"
ok "Yes"
}
steps {
echo 'Confirmed production deploy'
}
}
stage('Deploy Production') {
stage('internal') {
agent { label 'master' }
steps {
sh 'deploy something'
}
}
}
}
}
Try a parametrized Job with a Boolean parameter and two separate stages for Build and Deploy:
pipeline{
parameters {
booleanParam(name: 'deploy_param', defaultValue: false, description: 'Check if want to deploy')
}
stages{
stage("Build"){
steps{
// build steps
}
}
stage("Deploy"){
when {
environment name: 'deploy_param', value: 'true'
}
steps{
// deploy steps
}
}
}
}
In this way yo can have a CI build with "Deploy" stage turned off, as the deploy_param is set to false by default. And also a manual build ("when the chief wants") with "Deploy" stage turned on by manually setting the deploy_param to true.
I have a CI Seed Job DSL Job in jenkins which creates a jenkins pipeline job.Is there any possibilities to get parameters in CI Seed Job and pass the input parameters given in Seed job to the jenkins pipeline script.
Here in below example, how the schema name given as parameter can be updated in jenkins pipeline job when creating it
CI Seed Job Setup:
1. Configured one string parameter `SchemaName`
2. DSL Script for jenkins pipeline job creation
pipelineJob('job-name') {
definition {
cps {
script('''
pipeline {
agent any
stages {
stage('Stage 1') {
steps {
echo $SchemaName
}
}
stage('Stage 2') {
steps {
echo 'logic'
}
}
}
}
}
'''.stripIndent())
sandbox()
}
}
}
I have configured a Checkmarx job in Jenkins and I wanted to integrate the Job with the actual build job of a repository.
In my Jenkinsfile I've configured this as a stage and the job gets executed.
The question is how to I listen to failures on the Checkmarx job and accordingly change the status of my build job? Here's a snippet from my JenkinsFile
agent any
stages {
stage('Build') {
steps {
echo 'Building'
...
........
...........
}
}
stage('Checkmarx') {
when {
branch 'master'
}
steps {
echo 'Kicking off checkmarx job..'
build job: 'checkmarx', wait: false
}
}
If you would just make it wait for the downstream job it would fail with it
steps {
echo 'Kicking off checkmarx job..'
build job: 'checkmarx', wait: true
}
I have a pipeline with multiple stages, some of them are in parallel. Up until now I had a single code block indicating where the job should run.
pipeline {
triggers { pollSCM '0 0 * * 0' }
agent { dockerfile { label 'jenkins-slave'
filename 'Dockerfile'
}
}
stages{
stage('1'){
steps{ sh "blah" }
} // stage
} // stages
} // pipeline
What I need to do now is run a new stage on a different slave, NOT in docker.
I tried by adding an agent statement for that stage but it seems like it tries to run that stage withing a docker container on the second slave.
stage('test new slave') {
agent { node { label 'e2e-aws' } }
steps {
sh "ifconfig"
} // steps
} // stage
I get the following error message
13:14:23 unknown flag: --workdir
13:14:23 See 'docker exec --help'.
I tried setting the agent to none for the pipeline and using an agent for every step and have run into 2 issues
1. My post actions show an error
2. The stages that have parallel stages also had an error.
I can't find any examples that are similar to what I am doing.
You can use the node block to select a node to run a particular stage.
pipeline {
agent any
stages {
stage('Init') {
steps {
node('master'){
echo "Run inside a MASTER"
}
}
}
}
}
I'm going to use Jenkins pipeline plugin to test several binaries A B C on several nodes 1 2 3.
In the end of my test I would like to have every single result of all possible combinations. So my Pipe may not abort when a single stage fails. It should proceed.
eg: A1 green, A2 green, A3 red, B1 green, B2 red, ..., C3 green
But when the first binary returns with an value unequal zero ("Binary not working on the system") it's stage is marked as FAILURE and any other stages are skipped.
Is there a possibility in Jenkins Pipeline to mark a stage as "UNSTABLE" but proceed with running the other tests?
According to Continue Jenkins job after failed stage while marking stage as failed can't mark this step as failed. The solution of this in running tasks in parallel is not working for my setup. So is it possible to safely mark it as something else? Is it possible to manipulate the result of a stage?
This question How to continue past a failing stage in Jenkins declarative pipeline syntax intents to use a scripted pipeline. I would like to avoid that if it is possible to do it in an other way.
pipeline {
agent {label 'master'}
stages {
stage('A1') {
agent {label 'Node1'}
steps {
sh 'binA'
}
}
stage('A2') {
agent {label 'Node1'}
steps {
sh 'binB' // If this bin fails, all following stages are skipped
}
}
// ...
stage('C3'){
agent {label 'Node3'}
steps {
sh 'binC'
}
}
}
}
Declarative Pipeline: Though using currentBuild.result = 'UNSTABLE' works in declarative pipelines too, Blue Ocean displays all stages as unstable irrespective of which stage fails.
To mark only specific stages as unstable, use the step unstable(message: String) as described here within your stage and install/update the following plugins:
Pipeline: Basic Steps to 2.16 or newer
Pipeline: API Plugin to 2.34 or newer
Pipeline: Groovy to 2.70 or newer
Pipeline Graph Analysis to 1.10 or newer
Sample pipeline stage:
stage('Sign Code') {
steps {
script {
try {
pwd()
sh "<YOUR SCRIPT HERE>"
}
catch (err) {
unstable(message: "${STAGE_NAME} is unstable")
}
}
}
}
Note: This also marks the overall build status as unstable.
There is now a more elegant solution, that not only allows you to set a stage and the job result to unstable. Using catchError, you can set any combination of stage and build result:
pipeline {
agent any
stages {
stage('1') {
steps {
sh 'exit 0'
}
}
stage('2') {
steps {
catchError(buildResult: 'SUCCESS', stageResult: 'FAILURE') {
sh "exit 1"
}
}
}
stage('3') {
steps {
sh 'exit 0'
}
}
}
}
In the example above, all stages will execute, the pipeline will be successful, but stage 2 will show as failed:
As mentioned above, you can freely choose the buildResult and stageResult. You can even fail the build and continue the execution of the pipeline.
Just make sure your Jenkins is up to date, since this is a fairly new feature. (Pipeline: Basic Steps needs to be 2.18 or newer)
For scripted pipeline, you can use try .. catch blocks inside the stages and then set currentBuild.result = 'UNSTABLE'
in the exception handler.