I installed the Xcode-11-beta along with macOS 10.15 beta. At first I can play with SwiftUI preview normally. But after I tried to move the Xcode-beta from the ~/Downloads directory where I initially installed it, to /Applications, the preview can't work. Here is the error:
So I moved it back to ~/Downloads, hoping things will go well as before. But it gives the same error.
After this, I reinstalled it and I still got this error. Can anyone help me fix it?
The content of diagnostics report is this:
== DATE:
Wednesday, June 5, 2019 at 10:25:46 PM China Standard Time
== PENDING U
PDATE REASONS:
== PREVIEW UPDATE ERROR:
unexpected error occurred
Error Domain=com.apple.CoreSimulator.SimError Code=161 "The iOS 13.0 simulator runtime is not available." UserInfo={NSLocalizedRecoverySuggestion=Download the iOS 13.0 simulator runtime from the Components section in Xcode's Preferences., NSLocalizedFailureReason=runtime path not found, NSLocalizedDescription=The iOS 13.0 simulator runtime is not available.}
== VERSION INFO:
Tools: 11M336w
OS: 19A471t
== ENVIRONMENT:
[x] In valid workspace
[x] Project is using the new build system
Previews are available for targets that are built with the new build system. Change your project to use the new build system.
[x] Selected scheme (Landmarks)
Select a scheme from the scheme picker in the toolbar
[x] Selected run destination (iPhone 8)
Select a run destination from the scheme picker in the toolbar
[x] Have workspace arena
Try quitting and reopening your workspace
[x] Have build arena
Try quitting and reopening your workspace
[x] Open file has supported build settings
CoreSimulator does not currently like simruntime bundles being moved out from under it. By launching from ~/Downloads it became aware of the iOS.simruntime for iOS 13, then you moved it.
In this one specific case you can workaround the problem by killing com.apple.CoreSimulator.CoreSimulatorService.
Weird thing is I wake up in the morning and start my computer, the Canvas and the iOS 13.0 Simulator can work now.
So, I guess the solution to this may be just a brutal restart. ;]
The XCode 11 upgrade breaks simulators in a weird way that I don't fully understand - nothing I tried would work to get simulators to run after the upgrade, and I couldn't find much in the way of clear answers as to why that was the case, but the following two commands fixed the issue for me:
sudo xcrun simctl shutdown all
sudo xcrun simctl erase all
Related
My project is running fine in Xcode 11.3 but recently when I upgraded to Xcode 12 app is not getting installed in simulator and showing the error - Could not install at this time.
Failed to get FD to bundle executable....
I suddenly had the same problem, after years of work on the same project across several versions of Xcode and MacOS.
On Xcode 12.4 and MacOS 10.15.5, although everything was working fine, suddenly I got this error popup "Failed to get FD to bundle executable" while trying to Run the project on a(ny) Simulator.
I tried all the proposals I could find online, including changing the Executable Type (which had never changed) or clear the empty env vars defined in the Build settings (there weren't any). Uninstalling/reinstalling Xcode didn't help. Upgrading to MacOS 10.15.7 didn't either. Of course the Apple Support has been of no use at all (they replied with a few general FAQ links about how to use Simulator).
The only thing that worked for me was to checkout the project in a different folder...
The weird thing is, if I rename again my new folder to the initial folder name, it does the error again! It sounds to me like a MacOS bug and/or an Xcode bug.
Error running `xcrun simctl install 95F3A7B0-67B3-490E-B798-D1CBBF813B83 /Users/yakjuly/.expo/ios-simulator-app-cache/Exponent-2.21.3.tar.app`: An error was encountered processing the command (domain=IXUserPresentableErrorDomain, code=1):
Unable To Install “Expo Go”
Please try again later.
Failed to get FD to bundle executable at /Users/yakjuly/Library/Developer/CoreSimulator/Devices/95F3A7B0-67B3-490E-B798-D1CBBF813B83/data/Library/Caches/com.apple.mobile.installd.staging/temp.Nf39ZM/extracted/Exponent-2.21.3.tar.app/Expo Go
Underlying error (domain=MIInstallerErrorDomain, code=4):
Failed to get FD to bundle executable at /Users/yakjuly/Library/Developer/CoreSimulator/Devices/95F3A7B0-67B3-490E-B798-D1CBBF813B83/data/Library/Caches/com.apple.mobile.installd.staging/temp.Nf39ZM/extracted/Exponent-2.21.3.tar.app/Expo Go
I have this problem when I get started with react native.
The issue for me is the file in /Users/yakjuly/.expo/ios-simulator-app-cache/Exponent-2.21.3.tar.app is broken. After I delete this file and re-run the command. it succeeds installing app in iOS simulator.
What solved this for me was the following:
close emulator
clean project and build folder
Shortcut: Command+Shift+K
GUI: Menu Bar -> Product -> Clean/Clean Build Folder
restart emulator
Xcode 13.2.1
The following steps helped me -
1. Select simulator
2. Goto Device
3. Select -> Erase All Content and Settings...
Hopefully, now you will be able to install and run the app on your simulator.
I'm trying to launch the ios simulator to try an React Native App. I did't hace XCode installed until now.
To install my simulator, I had installed XCode, and I started a project "Simulator", to push "next" I needed a company name, I put "simu", after that, I clicked on "Project > Run", and I could see my simulator run.
In my CLI, when I launch the command yarnpkg run ios, I get this error:
Simulator is installed but is identified as 'simu.Simulator'; don't know what that is.
23:55:17: Failed to start simulator:
Unable to verify Xcode and Simulator installation.
I removed all my simulators, but the name persists, I had search how to change the identificator, but I dont find results.
I would like to know if I can change the "simu.Simulator" to Simulator, someone can help me?
The issue you might be facing is there might not be command line tools selected in your xCode Preferences. In Preferences -> Location, Choose command line tool
By default, after installing Xcode command-line not selected, so open Xcode and go to Preferences >> Locations and set Command Line Tools...
This worked for me in MAC High Sierra, Xcode Version 9.3:
Press i to open iOS emulator...
And You can see a cool new iPhone simulator like below image:
For Expo 32, the other solutions didn't work for me.
This SO answer solved it for me: Just open the Simulator before invoking it from Expo.
This worked for me with IOS Ph 11 simulator and subsequently for all the other devices
I recently installed the beta of Xcode Version 6 in OS X Mavericks, with which comes the iOS simulator for iOS 8. I've managed to successfully run from Xcode 6 beta on a device with iOS 8 Beta, but opening the simulator always get the same error I have tried to change the hardware version of iPhone 4s, iPhone 5, ... in the simulator and still gives the same error: "Unable to boot the iOS Simulator".
I'm working with Xcode 5.1 at the same time in Mavericks, any suggestion to solve this? Is a possible problem for run this simulator in Mavericks because is only for OS X 10.10? Thanks.
After I found some solutions on the web, a combination of procedures worked for me:
Close Xcode and iOS Simulator (and all related applications)
Install (or reinstall) Xcode6-Beta to Applications folder (direct from the .dmg file)
Open Xcode6-Beta and go to Xcode -> Preferences -> Locations -> Command Line Tools and select "Xcode 6.0" (be sure that you've selected the one in Applications folder)
Launch the iOS Simulator and go to iOS Simulator -> Reset Content and Settings...
Close all the applications and restart your mac (I unchecked "Reopen windows...")
Open Xcode6-beta and test the iOS Simulator
Good luck
I also had this problem and found the solution by doing following steps:
Initially i downloaded Xcode 6 library in Documentation section under the path Xcode --> Preferences --> Downloads and restart my xcode but didn't solve my problem.
Downloaded and installed the iOS 7.1 Simulator under the path Xcode --> Preferences --> Downloads.
Restart xcode again and the problem solved.
I am facing same issue again next morning.
Unsetting the DYLD_INSERT_LIBRARIES variable solves my problem:-
Open terminal and type "sudo vi /etc/launchd.conf" command and press Enter
Press I "Insert" mode and change this
"setenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
to this
"unsetenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
and press esc to exit from insert mode.
Save changes by typing ":wq" Press Enter
Reboot your system and problem soloved.
Prior to that I didn't find any iOS version in front of each listed devices
but after installation or by unsetting DYLD_INSERT_LIBRARIES variable I found the same in front of each device.
I solved by removing and re-adding the simulators see screenshots here.
https://stackoverflow.com/a/25387715/1565615
I don't believe your issue is related to running Xcode 6 in Mavericks, as I encountered the same error on OS X 10.10.
After a bit of toying around with XCode and the iOS Simulator, the only fix I found was simply restarting the computer, and the error hasn't appeared since.
Try a reboot and then see if you can get things up and running.
(On a side note, after restarting just XCode (not the OS), I lost the option to run on the simulator at all—the reboot also fixed this problem, if anyone here encounters anything similar).
In Xcode go to the Xcode menu->Open Developer Tool - IOS Simulators. Choose simulator and then go hardware->device->manage device.
If the troubled device shows in the left column, delete it. Then add the device back from the '+' button. If it wasn't there in the first place, simply add it using the '+' button.
I had previously deleted ~/Library/Developer/CoreSimulator/ directory and the only command that worked for me is xcrun simctl erase all. Perhaps you might want to give this a try.
No need to download a new ios version. All you need is to go to About this Mac > Storage > Manage > Delete XCode Cache. And, it works for me
In latest OS version
About this Mac > Storage > Manage > Developer > select Xcode cache > Click delete button
I've faced same issue and solved by below steps:
1) Move xcode6-beta into application folder
2) Restart mac and open xcode6-beta from application folder.
i too had the same issue, but solved by installing the required simulators (Xcode > Preferences> downloads > install simulators)
This happened to me running the simulator on both Xcode 7 and 8 on El Capitan. The only thing that worked was disabling System Integrity Protection (https://apple.stackexchange.com/a/208481/86757).
I tested an awful quantity of solutions and the only one which worked for me was disabling root protection through Recovery Mode. I tested it with XCode 7.3, it's possible that this approach may work for XCode 8.
Reboot and hold the keys cmd + R prior to show the loading view with Apple Logo
When you are on Recovery Mode, go to Menu and choose Terminal
Type csrutil disable
Reboot the machine and run the simulator again.
I am adding this answer as it seems to be slightly different from the others.
Due to working on an older project I needed to download and run Xcode 7.3 and load the project in simulator - this yielded the "Unable to boot the iOS Simulator" error.
I completed all the above suggestions and none of them worked (reset simulator setting, restarted, deleted and reinstalled Xcode, reset the simulator location, restarted again etc)
In the end the issue was that I was trying to load the iPhone 5 (10.0) simulator on Xcode 7.3.
You can see here the Apple release notes for Xcode 7.3
Xcode 7.3 requires a Mac running OS X 10.11 or later.
Xcode 7.3 includes SDKs for iOS 9.3, watchOS 2.2, OS X version 10.11.4, and tvOS
9.2.
As you can see Xcode 7.3 doesn't include an SDK for iOS 10.0
This meant as soon as I loaded the simulator with iPhone 5 (9.3) it worked immediately.
I would therefore recommend when approaching this issue not to get railroaded (as I did) in thinking that something is wrong with the system before checking the basic things.
Note: It is also worth noting that the simulator must be configured to the Xcode version being used. This can be set in
Xcode -> Preferences -> Locations -> Command Line Tools
and also using the command line:
sudo xcode-select --switch /Applications/Xcode_7.3.app/Contents/Developer
*change the Xcode version to the new one you want to use
one of the reasons could be you might deleted /private folder.
you can try with following commands
sudo mkdir /private/tmp
sudo chmod 1777 /private/tmp
Following are the steps for solved above issue:
Search launchd.conf file in your mac
If not found then create from Terminal with help of command
~ user$ sudo touch /etc/launchd.conf
Terminal will ask you machine password
Then Open created file with help of command for EDIT, if terminal give you error as permission failed
~ user$ sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit /etc/launchd.conf
Open file manually from /etc/launchd.conf (Shift+cmd+g) and enter /etc/ (TextEdit software)
In file "DYLD_INSERT_LIBRARIES" flag replace with "ZZ" and save it.
Restart your machine.
Xcode will defiantly works.
This error indicates an error starting up launchd_sim when booting the simulated device. In and of itself, it does not indicate the actual cause. You can look in ~/Library/Logs/CoreSimulator/CoreSimulator.log for more information about the error (including the error reason).
Possible causes:
On OSX 10.9 and earlier, DYLD_INSERT_LIBRARIES could be set by 3rd party applications. On later versions, invalid DYLD_INSERT_LIBRARIES are ignored instead of resulting in an error.
Usage of older simulator runtime DLC with Xcode 7 betas. Newer versions of Xcode ignore these older DLC.
If you need additional help, please provide that additional datum.
Just check your simulator's iOS version. I fought with this error for 2 days and tried everything. Once I run the project on the simulator with iOS version that my Xcode supports, it worked sadly... :/
I quit everything and restarted the Mac. That's all. Its worked like charm!!
I don't know why, but this happened to me when I had Charles Proxy's throttling turned on.
I didn't have to run Xcode again or clean anything. Just disabling the throttling allowed the simulator to work again.
I also clicked on details, but this was all that I got:
Details
Unable to boot the Simulator. Domain: NSPOSIXErrorDomain
Code 60
Failure Reason: launchd failed to respond.
This might be related a known Xcode 11.2 issue:
Third party “endpoint security” software may cause slow simulators, system freezes, or prevent debug processes from running in simulators reliably. This sometimes manifests as debugserver disconnections or simulator applications receiving a SIGKILL signal. (55853555)
Workaround: Uninstall the third party software.
Though I was seeing this error on 11.1. Yet Apple may have just not realized this was an issue on 11.1 as well ¯_(ツ)_/¯
I have solved this issue using following steps:
Xcode -> Preferences -> Location -> Derived Data -> Delete your project folder.
I got this error on OS Catalina, Xcode 11.
I solved this by simply quiting simulator and Xcode, and then start Xcode and run your application.
1. Quit Xcode and Simulator if running.
2. Remove customised settings setup
defaults delete com.apple.Xcode
3. remove configuration folders
rm -rf ~/Library/Application\ Support/Xcode
4. Quit the terminal and run Xcode again.
Resetting the simulators fixed the issue for me. Run the below
Fastlane command to reset all simulators,
fastlane snapshot reset_simulators
Please ensure you have closed Xcode & simulator before running the command.
Fastlane is an Android & iOS deployment automation tool.
I just simply follow the below steps and the issue is resolved...
Go to About This Mac > Storage > Manage > Developer >
Select Xcode cache > Delete the cache
Now try to open the simulator again and it will work... In case if above steps did not work just try to do the same with s
Late answer, but it maybe helpful to someone. I tried all the solutions provided in this and related posts and neither of them worked.
I am using OSX(version 10.10.3) and Xcode 6.2. To fix this issue I followed the following steps :
Delete all xcode and simulator related files using AppCleaner.
Restart Mac.
Open Disk Utility app from applications.
In Disk Utility app; click on button Verify Disk Permission for your Macintosh HD (there will be some warnings displayed; I think /private/tmp is cause of this issue).
In Disk Utility app; click on button Repair Disk Permission for your Macintosh HD.
Re-install Xcode; now it should work.
More info : How to fix Xcode error ‘Unable to boot iOS Simulator’.
This may helpful
Open simulator with 4s
Click on menu- iOS simulator
Click on Reset content and settings...
Force close the simulator and run app.
My app is crashing in Xcode 7.0 beta 6 when I run it in the simulator with following error message:
Xcode quit unexpectedly.
Click Reopen to open the application again. Click Report to see more detailed information and send a report to Apple.
Here is my crash report:
http://pastebin.com/YechkXrm
Things I noticed:
The crash happens 100% of the time so I am unable to run my app in the simulator or execute unit tests.
Same app does NOT crash on a different computer running identical OS X and Xcode versions.
A different app did not crash.
What I tried so far:
Reinstalling Xcode.
Reseting content and settings of the simulator.
Clearing ~/Library/Developer/Xcode/DerivedData and ~/Library/Caches/com.apple.dt.Xcode/ directories.
Deleting and adding the simulator from Window > Devices.
Xcdode > Preferences > Source Control > Uncheck the Enable Source control.
Selecting "Command line tools" version from Preferences > Locations.
Restarting my computer.
I did submit a bug report to Apple.
Xcode Version 7.0 beta 6 (7A192o)
OS X Version 10.10.5 (14F27)
Mystery solved
I found out the source of the problem. I am using Carthage to build frameworks. To solve this problem I needed to run carthage update. I think that last time I did that I did not commit the built framework files from Carthage/Build directory. And maybe when I installed newer Xcode version it caused the problem with the framework files there were built using previous command line tools.
I recently installed the beta of Xcode Version 6 in OS X Mavericks, with which comes the iOS simulator for iOS 8. I've managed to successfully run from Xcode 6 beta on a device with iOS 8 Beta, but opening the simulator always get the same error I have tried to change the hardware version of iPhone 4s, iPhone 5, ... in the simulator and still gives the same error: "Unable to boot the iOS Simulator".
I'm working with Xcode 5.1 at the same time in Mavericks, any suggestion to solve this? Is a possible problem for run this simulator in Mavericks because is only for OS X 10.10? Thanks.
After I found some solutions on the web, a combination of procedures worked for me:
Close Xcode and iOS Simulator (and all related applications)
Install (or reinstall) Xcode6-Beta to Applications folder (direct from the .dmg file)
Open Xcode6-Beta and go to Xcode -> Preferences -> Locations -> Command Line Tools and select "Xcode 6.0" (be sure that you've selected the one in Applications folder)
Launch the iOS Simulator and go to iOS Simulator -> Reset Content and Settings...
Close all the applications and restart your mac (I unchecked "Reopen windows...")
Open Xcode6-beta and test the iOS Simulator
Good luck
I also had this problem and found the solution by doing following steps:
Initially i downloaded Xcode 6 library in Documentation section under the path Xcode --> Preferences --> Downloads and restart my xcode but didn't solve my problem.
Downloaded and installed the iOS 7.1 Simulator under the path Xcode --> Preferences --> Downloads.
Restart xcode again and the problem solved.
I am facing same issue again next morning.
Unsetting the DYLD_INSERT_LIBRARIES variable solves my problem:-
Open terminal and type "sudo vi /etc/launchd.conf" command and press Enter
Press I "Insert" mode and change this
"setenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
to this
"unsetenv DYLD_INSERT_LIBRARIES /usr/lib/libimckit.dylib"
and press esc to exit from insert mode.
Save changes by typing ":wq" Press Enter
Reboot your system and problem soloved.
Prior to that I didn't find any iOS version in front of each listed devices
but after installation or by unsetting DYLD_INSERT_LIBRARIES variable I found the same in front of each device.
I solved by removing and re-adding the simulators see screenshots here.
https://stackoverflow.com/a/25387715/1565615
I don't believe your issue is related to running Xcode 6 in Mavericks, as I encountered the same error on OS X 10.10.
After a bit of toying around with XCode and the iOS Simulator, the only fix I found was simply restarting the computer, and the error hasn't appeared since.
Try a reboot and then see if you can get things up and running.
(On a side note, after restarting just XCode (not the OS), I lost the option to run on the simulator at all—the reboot also fixed this problem, if anyone here encounters anything similar).
In Xcode go to the Xcode menu->Open Developer Tool - IOS Simulators. Choose simulator and then go hardware->device->manage device.
If the troubled device shows in the left column, delete it. Then add the device back from the '+' button. If it wasn't there in the first place, simply add it using the '+' button.
I had previously deleted ~/Library/Developer/CoreSimulator/ directory and the only command that worked for me is xcrun simctl erase all. Perhaps you might want to give this a try.
No need to download a new ios version. All you need is to go to About this Mac > Storage > Manage > Delete XCode Cache. And, it works for me
In latest OS version
About this Mac > Storage > Manage > Developer > select Xcode cache > Click delete button
I've faced same issue and solved by below steps:
1) Move xcode6-beta into application folder
2) Restart mac and open xcode6-beta from application folder.
i too had the same issue, but solved by installing the required simulators (Xcode > Preferences> downloads > install simulators)
This happened to me running the simulator on both Xcode 7 and 8 on El Capitan. The only thing that worked was disabling System Integrity Protection (https://apple.stackexchange.com/a/208481/86757).
I tested an awful quantity of solutions and the only one which worked for me was disabling root protection through Recovery Mode. I tested it with XCode 7.3, it's possible that this approach may work for XCode 8.
Reboot and hold the keys cmd + R prior to show the loading view with Apple Logo
When you are on Recovery Mode, go to Menu and choose Terminal
Type csrutil disable
Reboot the machine and run the simulator again.
I am adding this answer as it seems to be slightly different from the others.
Due to working on an older project I needed to download and run Xcode 7.3 and load the project in simulator - this yielded the "Unable to boot the iOS Simulator" error.
I completed all the above suggestions and none of them worked (reset simulator setting, restarted, deleted and reinstalled Xcode, reset the simulator location, restarted again etc)
In the end the issue was that I was trying to load the iPhone 5 (10.0) simulator on Xcode 7.3.
You can see here the Apple release notes for Xcode 7.3
Xcode 7.3 requires a Mac running OS X 10.11 or later.
Xcode 7.3 includes SDKs for iOS 9.3, watchOS 2.2, OS X version 10.11.4, and tvOS
9.2.
As you can see Xcode 7.3 doesn't include an SDK for iOS 10.0
This meant as soon as I loaded the simulator with iPhone 5 (9.3) it worked immediately.
I would therefore recommend when approaching this issue not to get railroaded (as I did) in thinking that something is wrong with the system before checking the basic things.
Note: It is also worth noting that the simulator must be configured to the Xcode version being used. This can be set in
Xcode -> Preferences -> Locations -> Command Line Tools
and also using the command line:
sudo xcode-select --switch /Applications/Xcode_7.3.app/Contents/Developer
*change the Xcode version to the new one you want to use
one of the reasons could be you might deleted /private folder.
you can try with following commands
sudo mkdir /private/tmp
sudo chmod 1777 /private/tmp
Following are the steps for solved above issue:
Search launchd.conf file in your mac
If not found then create from Terminal with help of command
~ user$ sudo touch /etc/launchd.conf
Terminal will ask you machine password
Then Open created file with help of command for EDIT, if terminal give you error as permission failed
~ user$ sudo /Applications/TextEdit.app/Contents/MacOS/TextEdit /etc/launchd.conf
Open file manually from /etc/launchd.conf (Shift+cmd+g) and enter /etc/ (TextEdit software)
In file "DYLD_INSERT_LIBRARIES" flag replace with "ZZ" and save it.
Restart your machine.
Xcode will defiantly works.
This error indicates an error starting up launchd_sim when booting the simulated device. In and of itself, it does not indicate the actual cause. You can look in ~/Library/Logs/CoreSimulator/CoreSimulator.log for more information about the error (including the error reason).
Possible causes:
On OSX 10.9 and earlier, DYLD_INSERT_LIBRARIES could be set by 3rd party applications. On later versions, invalid DYLD_INSERT_LIBRARIES are ignored instead of resulting in an error.
Usage of older simulator runtime DLC with Xcode 7 betas. Newer versions of Xcode ignore these older DLC.
If you need additional help, please provide that additional datum.
Just check your simulator's iOS version. I fought with this error for 2 days and tried everything. Once I run the project on the simulator with iOS version that my Xcode supports, it worked sadly... :/
I quit everything and restarted the Mac. That's all. Its worked like charm!!
I don't know why, but this happened to me when I had Charles Proxy's throttling turned on.
I didn't have to run Xcode again or clean anything. Just disabling the throttling allowed the simulator to work again.
I also clicked on details, but this was all that I got:
Details
Unable to boot the Simulator. Domain: NSPOSIXErrorDomain
Code 60
Failure Reason: launchd failed to respond.
This might be related a known Xcode 11.2 issue:
Third party “endpoint security” software may cause slow simulators, system freezes, or prevent debug processes from running in simulators reliably. This sometimes manifests as debugserver disconnections or simulator applications receiving a SIGKILL signal. (55853555)
Workaround: Uninstall the third party software.
Though I was seeing this error on 11.1. Yet Apple may have just not realized this was an issue on 11.1 as well ¯_(ツ)_/¯
I have solved this issue using following steps:
Xcode -> Preferences -> Location -> Derived Data -> Delete your project folder.
I got this error on OS Catalina, Xcode 11.
I solved this by simply quiting simulator and Xcode, and then start Xcode and run your application.
1. Quit Xcode and Simulator if running.
2. Remove customised settings setup
defaults delete com.apple.Xcode
3. remove configuration folders
rm -rf ~/Library/Application\ Support/Xcode
4. Quit the terminal and run Xcode again.
Resetting the simulators fixed the issue for me. Run the below
Fastlane command to reset all simulators,
fastlane snapshot reset_simulators
Please ensure you have closed Xcode & simulator before running the command.
Fastlane is an Android & iOS deployment automation tool.
I just simply follow the below steps and the issue is resolved...
Go to About This Mac > Storage > Manage > Developer >
Select Xcode cache > Delete the cache
Now try to open the simulator again and it will work... In case if above steps did not work just try to do the same with s
Late answer, but it maybe helpful to someone. I tried all the solutions provided in this and related posts and neither of them worked.
I am using OSX(version 10.10.3) and Xcode 6.2. To fix this issue I followed the following steps :
Delete all xcode and simulator related files using AppCleaner.
Restart Mac.
Open Disk Utility app from applications.
In Disk Utility app; click on button Verify Disk Permission for your Macintosh HD (there will be some warnings displayed; I think /private/tmp is cause of this issue).
In Disk Utility app; click on button Repair Disk Permission for your Macintosh HD.
Re-install Xcode; now it should work.
More info : How to fix Xcode error ‘Unable to boot iOS Simulator’.
This may helpful
Open simulator with 4s
Click on menu- iOS simulator
Click on Reset content and settings...
Force close the simulator and run app.