I have rebuilt an opensource windwows driver. Than, I have signed it, but not myself, because in our company there is a web app for code signing. There is a digital signature in file, but windows 10 64 bit says that driver is unsigned. What may be wrong? Why can`t I use the driver without test mode ON?
File is here:
https://drive.google.com/open?id=1qYDieeAePgdIwbDhAHCQxOukHfkujZ0e
The signature must be from a trusted provider. You should add your certificate as a trusted root of the device.
Update. For kernel-mode drivers you must enable test signing mode.
https://learn.microsoft.com/en-us/windows-hardware/drivers/install/the-testsigning-boot-configuration-option
Related
I am trying the proxy the network traffic from my iPhone to Mac via Charles Proxy, below are the versions i am using:
iPhone - model 13, OS - 15.4
Mac - OS - Monterey (12.2.3)
Charles - 4.6.2 (licensed)
I installed Charles on Mac, enabled SSL Proxying, added generic IP (0.0.0.0/0) in Access Control Settings, got the local IP address from Help and used it on my iPhone wifi settings - Proxy > manual > local IP from Charles and port 8888.
As soon as i do this my phone is not able to connect to internet at all. I have seen various instructions about adding root certificate, enabling trust settings etc, but those all can be done only if am able to connect to internet to download the certificates. Which i am unable to.
I went through every question on this site which mentions Charles proxy, but none could provide any solution to my problem so appreciate any inputs on this.
If there is no important information in your phone, you can reset the network settings first, then try the following
Make sure that both the computer and the phone are not using a virtual private network
The computer and the phone are in the same network environment
The computer has the Charles root certificate installed
The phone has successfully installed Charles' certificate and trusts it.
If the above suggestions don't help you, I suggest starting from scratch and troubleshooting the problem step by step
Let's take mobile phones and computers accessing https://www.google.com separately as an example
After the computer installs the certificate, can it be connected to the Internet normally, and can it crawl Google's response request?
The mobile phone and the computer are on the same network segment and use the proxy URL provided by charles. Can you access and download the certificate?
3. On the computer, does Charles pop up an access prompt and ask you to choose whether to agree to the access?
Turn off the computer-side crawling and access it on the mobile phone to see if it can crawl the response request on the mobile phone.
Next time, check the firewall in the security and privacy settings. It should not block Charles' incoming connections. I spent two hours trying to figure out what was going on
I need to be able to capture HTTP(S) requests from Android and iOS devices, for both Browsers and, in the future, for Native apps for testing purposes mainly.
Some aspects to consider:
There are a lot of devices/iOS combinations to support, so the only viable solution is to use a Cloud Browser provider like SauceLabs, BrowserStack, etc.
Preferably, I would use Real devices, not Emulators/Simulators
We could make any kind of tweaks for the staging environment of the site under test in case is needed
Same for the native applications
My first attempt was to give it a try with FiddlerCore, and while it works on Android, it doesn't work on iOS because of the self-signed certificate that would require to be trusted manually (leaving aside the fact that due to security reasons, no Cloud Browser provider would allow you to do it).
So, next I thought of creating a proxy server and buying a Trusted CA Signed Certificate (e.g. Comodo, GoDaddy, etc), setup the device to use that proxy server and then fetch in my tests the requests and responses from it.
I don't know much about Certificates and don't have extensive experience Appium, so the following questions arise:
Will the setup mentioned above, using a proxy server and trusted CA signed cert suffice for iOS not to complain that the certificate is not trusted? Note that I won't be able to manually accept the cert on the device (in case it's needed).
In case the setup above will work, is it possible to setup using Appium the proxy settings on the device? As far as I know, Appium can interact with Android Settings menu, but I'm not sure about iOS.
Is there anything that I missed or that I could keep mind?
I am trying to find what is the default implementation of BlackBerry for TLS protocol. Does it default to 1.0 or 1.1 or 1.2.
I am trying to find 1. What versions are TLS are supported 2. What is the default?
I have an app on BB world that connects to a back office server. The server team has decided to deprecate TLSv1.0. I am trying to find if this will impact my customers?
Current versions of BB10 do indeed support TLS 1.2 which you can test by using tools provided by SSL Labs. Unfortunately that is not the end of the story.
TLS is a protocol which specifies how to set up and use an encrypted connection. It does not set absolute requirements on encryption algorithm support however. I am aware of one documented case of an issue connecting with some Exchange Active Sync servers because the BB10 device and the server as configured do not have any cypher suites in common. Other EAS servers that are configured differently do not present this issue to BB10 devices.
What you need to do is find out specifically how the server team is going to configure TLS, and what they are going to accept for connections.
I've been using Burp Suite to inspect HTTP traffic but for HTTPS traffic I've been unable to do so. I tried extracting Burps certificate and dropping it into the simulator and installing it, but my network calls still seem to be silently failing.
Burp is the simplest option so I'd like to know how to get it to work.
Check out the shell script written by the good folks over at Charles Proxy.
It installs automatically to the iPhone simulator. You should be able to use the same approach for Burp.
You can email yourself the cert to install it on a device. Another option is to modify your app to ignore the usual checks for the SSL cert, but don't forget to take it out for production.
Also the book Hacking and Securing iOS applications has tons of awesome advice if you're into stuff like this.
Here's another answer that must be where I got the idea of using the Charles script: Adding a self-signed certificate to iphone Simulator?
And another answer that might be relevant: iPhone TrustStore CA certificates
Background
A few years ago I was developing for C#, WPF and Silverlight and then moved to developing for Android.
I've decided to give Windows phone a try, and install the newest Visual Studio Pro 2012 with its Windows phone sdk, together with the latest version of Windows - windows 8 pro.
I've created a new Windows phone project hoping I will start learning from a hello world project, and I've launched the emulator .
Some specs information
OS is windows 8 pro (final) . 64 bit CPU .
Visual Studio Pro 2012
Windows phone sdk 8
Connected by usb to a wireless D-Link device (DWA-140) .
The problem
Just as soon as I've started the emulator, a dialog came asking if I want to enable networking:
When I chose that I want, an error has appeared:
After selecting ok, the emulator crashed.
Knowing how to search for solutions on the internet, I've found a few (like here and here ) that suggested me to delete the network switches, create an internal switch, and whatnot.
The question
I don't understand what I'm doing wrong, and this is just my starting point. Can anyone please help me with this error and how to make the emulator work?
Please tell me the exact steps that I need to take.
EDIT: after uninstallation of anything related to VS and WP , i've re-installed them both and i still get the same errors.
Not only that , but when trying to create a new external switch (which some websites offered) , it showed me the next error :
How could such a basic feature of an emulator be missing out of the box ?
You might try a couple of things.
First, verify the network connection settings for the "vEthernet (Internal Ethernet Port Windows Phone Emulator Internal Switch)" adapter.
To do so, open "Control Panel\Network and Internet\Network Connections" in Control Panel. Right click on the "vEthernet (Internal Ethernet Port Windows Phone Emulator Internal Switch)" adapter, and choose "Properties". Under "This connection uses the following items:" verify that ONLY the following options are selected:
Client for Microsoft Networks
QoS Packet Scheduler
File and Printer Sharing for Microsoft Networks
Microsoft LLDP Protocol Driver
Link-Layer Topology Discovery Mapper I/O Driver
Link-Layer Topology Discovery Responder
Internet Protocol Version 6 (TCP/IPv6)
Internet Protocol Version 4 (TCP/IPv4)
In addition, you may want to review the network adapter settings for the emulator image in "Hyper-V Manager"
Verify the network adapters that are shown are valid. You might try disabling some (like the adapters connected to the WiFi or Wired Ethernet adapters on your machine) if the adapters they are bound to are not currently enabled in the OS.
Let me know if that helps!
I suspect you may be running afoul of UAC. As you've noted, it's trying to create a virtual device. Doing so requires elevated permissions. If I were you I would either run VS2012 as Administrator or completely disable UAC until it's all installed and configured, and then you can turn UAC back on if you prefer it on. I think Allen's comment about manually creating a VM with the appropriate networking is astute and a worthwhile experiment, since it sidesteps the possible UAC issues.