I'm having some issues with timezone in esp8266
I'm getting +8 hours over the timezone that I config. I though that it was a bug in my code.
After some tests, i saw that the problem was since the beginning
void setup() {
if(ESP.getResetReason() != "Power on") {
WiFi.mode(WIFI_OFF);
}
Serial.begin(115200);
pinMode(PIN_RESETTODEFAULT,INPUT_PULLUP);
time_t now;
unsigned int currentime=time(&now);
struct tm *timeinfo = localtime(&now);
Serial.printf("HH:MM1: %d-%d-%d %d:%d:%d\r\n",timeinfo->tm_mday,timeinfo->tm_mon,timeinfo->tm_year,timeinfo->tm_hour,timeinfo->tm_min,timeinfo->tm_sec);
This code is returning me:
08:51:17.031 -> SDK:2.2.1(cfd48f3)/Core:2.4.2/lwIP:2.0.3(STABLE-2_0_3_RELEASE/glue:arduino-2.4.1-13-g163bb82)/BearSSL:6d1cefc
08:51:17.066 -> HH:MM1: 1-0-70 8:0:0
08:51:17.066 ->
If i set the hour from internet using ConfigTime the problem continues, even if I set the timezone properly.
It looks like a internal setting problem, a value in a register or something like that , but I dont get it, but i do this to config it right and i get those 8 aditional hours anyways:
configTime(0, 0, "pool.ntp.org", "time.nist.gov");
setenv("TZ", "CET-1CEST,M3.5.0,M10.5.0/3", 0);
Trying to reset the internal registers I do
configTime(0, 0, NULL, NULL, NULL);
setenv("TZ", "", 0);
tzset();
And then I get the right time for my zone, but this is not right
As I said, probably i'm missing something, but in all the examples I see the same stuff. Any tip is welcome.
Finally and after some hours trying different stuff, this worked for me:
void InitTimeZone()
{
struct timezone tz={0,0};
struct timeval tv={0,0};
settimeofday(&tv, &tz);
setenv("TZ", "CET-1CEST,M3.5.0,M10.5.0/3", 0);
tzset();
}
It seems like an internal register, but I dont get it. And i have to do that each time that the chip starts.
Related
I'm not sure I have a specific question other than--have other people seen this? And if so, is there a known workaround / fix? I have failed to find anything on Google on this topic.
Basically, we have an ASP.NET MVC application that we run on localhost that extensively uses the ASP.NET in memory cache. We cache many repeated requests to the Db.
Yesterday, we upgraded two of our dev machines to Windows 10 Creators Update. After that update, we noticed that the page requests on just those machines started to craw. Upwards of 30 seconds per page.
After some debugging and viewing logs, we are seeing that the system is making the same request to the Db 200-300 times per request. Previously, this would just be cached the first time, and that request would not happen again until the cache expired it.
What we are seeing is that this code:
var myObject = LoadSomethingFromDb();
HttpRuntime.Cache.Insert("test", myObject);
var test = HttpRuntime.Cache.Get("test");
at some point, the Get would be returning NULL even if it is right after the Insert in code and even though there is no way the cache is even close to full. The application is just starting.
Anybody else see this?
Nevermind. We got bit by the Absolute Cache Expiration parameter which I neglected to include in the question's code because I didn't think that was relevant.
We were using an absolute cache expiration of:
DateTime.Now.AddMinutes(60)
instead, we should have been using:
DateTime.UtcNow.AddMinutes(60)
Not sure why the former was fine in Windows prior to Creator's Update, but the change to UtcNow seems to make the cache work again.
It appears that after the windows creators update that the behavior of cache.Insert overload methods behave differently.
[Test]
public void CanDemonstrateCacheExpirationInconsistency()
{
var cache = HttpRuntime.Cache;
var now = DateTime.Now;
var key1 =$"Now{now.Ticks}";
var key2 = key1+"2";
var key3 = $"UtcNow{now.Ticks}";
var key4 = key3 + "2";
cache.Insert(key1, true, null, DateTime.Now.AddHours(1), Cache.NoSlidingExpiration);
cache.Insert(key2, true, null, DateTime.Now.AddHours(1), Cache.NoSlidingExpiration,CacheItemPriority.Default,null);
cache.Insert(key3, true, null, DateTime.UtcNow.AddHours(1), Cache.NoSlidingExpiration);
cache.Insert(key4, true, null, DateTime.UtcNow.AddHours(1), Cache.NoSlidingExpiration, CacheItemPriority.Default, null);
Assert.That(cache.Get(key1), Is.Null); //Using this overload with datetime.now expires the cache immediately
Assert.That(cache.Get(key2), Is.Not.Null);
Assert.That(cache.Get(key3), Is.Not.Null);
Assert.That(cache.Get(key4), Is.Not.Null);
}
could you guys give a an example of a code that prints DateTimeToUnix in Pascal?
Found out a topic talking about in Delphi (DateTimeToUnix in UTC?), but i cant find a code example anywhere.
function DateTimeToUnix(
const AValue: TDateTime
):Int64;
Here is an example in c#
public static int UnixTimeStamp()
{
return (int)DateTime.UtcNow.Subtract(new DateTime(1970, 1, 1)).TotalSeconds;
}
}
Also, i did a little search and this function seems to print the System time without using timezone (UTC), so how i could adjust the result to the timezone i want (eg. UTC -3).
Thanks,
stdin.readByteSync has recently been added to Dart.
Using stdin.readByteSync for data entry, I am attempting to allow a default value and if an entry is made by the operator, to clear the default value. If no entry is made and just enter is pressed, then the default is used.
What appears to be happening however is that no terminal output is sent to the terminal until a newline character is entered. Therefore when I do a print() or a stdout.write(), it is delayed until newline is entered.
Therefore, when operator enters first character to override default, the default is not cleared. IE. The default is "abc", data entered is "xx", however "xxc" is showing on screen after entry of "xx". The "problem" appears to be that no "writes" to the terminal are sent until newline is entered.
While I can find an alternative way of doing this, I would like to know if this is the way readByteSync should or must work. If so, I’ll find an alternative way of doing what I want.
// Example program //
import 'dart:io';
void main () {
int iInput;
List<int> lCharCodes = [];
print(""); print("");
String sDefault = "abc";
stdout.write ("Enter data : $sDefault\b\b\b");
while (iInput != 10) { // wait for newline
iInput = stdin.readByteSync();
if (iInput == 8 && lCharCodes.length > 0) { // bs
lCharCodes.removeLast();
} else if (iInput > 31) { // ascii printable char
lCharCodes.add(iInput);
if (lCharCodes.length == 1)
stdout.write (" \b\b\b\b chars cleared"); // clear line
print ("\nlCharCodes length = ${lCharCodes.length}");
}
}
print ("\nData entered = ${new String.fromCharCodes(lCharCodes).trim()}");
}
Results on Command screen are :
c:\Users\Brian\dart-dev1\test\bin>dart testsync001.dart
Enter data : xxc
chars cleared
lCharCodes length = 1
lCharCodes length = 2
Data entered = xx
c:\Users\Brian\dart-dev1\test\bin>
I recently added stdin.readByteSync and readLineSync, to easier create small scrips reading the stdin. However, two things are still missing, for this to be feature-complete.
1) Line mode vs Raw mode. This is basically what you are asking for, a way to get a char as soon as it's printed.
2) Echo on/off. This mode is useful for e.g. typing in passwords, so you can disable the default echo of the characters.
I hope to be able to implement and land these features rather soon.
You can star this bug to track the development of it!
This is common behavior for consoles. Try to flush the output with stdout.flush().
Edit: my mistake. I looked at a very old revision (dartlang-test). The current API does not provide any means to flush stdout. Feel free to file a bug.
Update
I've found the problem, the exception came from a 2nd field on the same form which indeed should have prompted it (because it was empty)... I was looking at an error which I thought came from trying to parse one string, when in fact it was from trying to parse another string... Sorry for wasting your time.
Original Question
I'm completely dumbfounded by this problem. I am basically running int.Parse("32") and it throws a FormatException. Here's the code in question:
private double BindGeo(string value)
{
Regex r = new Regex(#"\D*(?<deg>\d+)\D*(?<min>\d+)\D*(?<sec>\d+(\.\d*))");
Regex d = new Regex(#"(?<dir>[NSEW])");
var numbers = r.Match(value);
string degStr = numbers.Groups["deg"].ToString();
string minStr = numbers.Groups["min"].ToString();
string secStr = numbers.Groups["sec"].ToString();
Debug.Assert(degStr == "32");
var deg = int.Parse(degStr);
var min = int.Parse(minStr);
var sec = double.Parse(secStr);
var direction = d.Match(value).Groups["dir"].ToString();
var result = deg + (min / 60.0) + (sec / 3600.0);
if (direction == "S" || direction == "W") result = -result;
return result;
}
My input string is "32 19 17.25 N"
The above code runs on a .NET 4 web hosting service (aspspider) on an ASP.NET MVC 3 web application (with Razor as its view engine).
Note the assersion of degStr == "32" is valid! Also when I take the above code and run it in a console application it works just fine. I've scoured the web for an answer, nothing...
Any ideas?
UPDATE (stack trace)
[FormatException: Input string was not in a correct format.]
System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) +9586043
System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) +119
System.Int32.Parse(String s) +23
ParkIt.GeoModelBinder.BindGeo(String value) in C:\MyProjects\ParkIt\ParkIt\GeoBinder.cs:42
Line 42 is var deg = int.Parse(degStr); and note that the exception is in System.Int32.Parse (not in System.Double as was suggested).
You are wrongly thinking that it is the following line that is throwing the exception:
int.Parse("32")
This line is unlikely to ever throw an exception.
In fact it is the following line:
var sec = double.Parse(secStr);
In this case secStr = "17.25";.
The reason for that is that your hosting provider uses a different culture in which the . is not a decimal separator.
You have the possibility to specify the culture in your web.config file:
<globalization culture="en-US" uiCulture="en-US" />
If you don't do that, then auto is used. This means that the culture could be set based on the client browser preferences (which are sent with each request using the Accept-Language HTTP header).
Another possibility is to specify the culture when parsing:
var sec = double.Parse(secStr, CultureInfo.InvariantCulture);
This way you know for sure that . is the decimal separator for the invariant culture.
Testing this (via PowerShell):
PS [64] E:\dev #43> '32 19 17.25 N' -match "\D*(?\d+)\D*(?\d+)\D*(?\d+(\.\d*))"
True
PS [64] E:\dev #44> $Matches
Name Value
---- -----
sec 17.25
deg 32
min 19
1 .25
0 32 19 17.25
So the regex is working with all three named captures getting a value, all of which will parse OK (ie. it isn't something like \d matching something like U+0660: ARABIC-INDIC DIGIT ZERO that Int32.Parse doesn't handle).
But you do not check that the regex actually makes a match.
Therefore I suspect that the value passed to the function is not the input you expect. Put a breakpoint (or logging) at the start of the function and get the actual value of value.
I think what is happening is:
Value isn't what you think it is.
The regex fails to match.
The captures are empty
Int32.Parse("") is throwing (just confirmed: it throws a FormatException "Input string was not in a correct format.")
Adendum: Just noted you comment on the assertion.
If things seem contradictory go back to basics: at least one of your assumptions is wrong eg. there could be an off by one in the exception's line number (an edit to the file before going to that line number: very easy to do).
Stepping through with a debugger in this case is by far the easiest approach. On every expression check everything.
If you cannot use a debugger then try and remove that restriction, if not how about IntelliTrace? Othewrwise use some kind of logging (if you app doesn't have it, add it as you'll need it in the future for things like this).
try remove non unicode ( if any - non-visible) chars from string :
string s = "søme string";
s = Regex.Replace(s, #"[^\u0000-\u007F]", string.Empty);
edit
also - try to see its hex values to see where it is doing exceptio n :
BitConverter.ToString(buffer);
this will show you the hex values so you can verify...
also paste its value so we can see it.
It turns out that this is a non-question. The problem was that the exception came from a 2nd field on the same form which indeed should have prompted it (because it was empty)... I was looking at an error which I thought came from trying to parse one string, when in fact it was from trying to parse another string...
Sorry for wasting your time.
I'm building an nsIProtocolHandler implementation in Delphi. (more here)
And it's working already. Data the module builds gets streamed over an nsIInputStream. I've got all the nsIRequest, nsIChannel and nsIHttpChannel methods and properties working.
I've started testing and I run into something strange. I have a page "a.html" with this simple HTML:
<img src="a.png">
Both "xxm://test/a.html" and "xxm://test/a.png" work in Firefox, and give above HTML or the PNG image data.
The problem is with displaying the HTML page, the image doesn't get loaded. When I debug, I see:
NewChannel gets called for a.png, (when Firefox is processing an OnDataAvailable notice on a.html),
NotificationCallbacks is set (I only need to keep a reference, right?)
RequestHeader "Accept" is set to "image/png,image/*;q=0.8,*/*;q=0.5"
but then, the channel object is released (most probably due to a zero reference count)
Looking at other requests, I would expect some other properties to get set (such as LoadFlags or OriginalURI) and AsyncOpen to get called, from where I can start getting the request responded to.
Does anybody recognise this? Am I doing something wrong? Perhaps with LoadFlags or the LoadGroup? I'm not sure when to call AddRequest and RemoveRequest on the LoadGroup, and peeping from nsHttpChannel and nsBaseChannel I'm not sure it's better to call RemoveRequest early or late (before or after OnStartRequest or OnStopRequest)?
Update: Checked on the freshly new Firefox 3.5, still the same
Update: To try to further isolate the issue, I try "file://test/a1.html" with <img src="xxm://test/a.png" /> and still only get above sequence of events happening. If I'm supposed to add this secundary request to a load-group to get AsyncOpen called on it, I have no idea where to get a reference to it.
There's more: I find only one instance of the "Accept" string that get's added to the request headers, it queries for nsIHttpChannelInternal right after creating a new channel, but I don't even get this QueryInterface call through... (I posted it here)
Me again.
I am going to quote the same stuff from nsIChannel::asyncOpen():
If asyncOpen returns successfully, the
channel is responsible for keeping
itself alive until it has called
onStopRequest on aListener or called
onChannelRedirect.
If you go back to nsViewSourceChannel.cpp, there's one place where loadGroup->AddRequest is called and two places where loadGroup->RemoveRequest is being called.
nsViewSourceChannel::AsyncOpen(nsIStreamListener *aListener, nsISupports *ctxt)
{
NS_ENSURE_TRUE(mChannel, NS_ERROR_FAILURE);
mListener = aListener;
/*
* We want to add ourselves to the loadgroup before opening
* mChannel, since we want to make sure we're in the loadgroup
* when mChannel finishes and fires OnStopRequest()
*/
nsCOMPtr<nsILoadGroup> loadGroup;
mChannel->GetLoadGroup(getter_AddRefs(loadGroup));
if (loadGroup)
loadGroup->AddRequest(NS_STATIC_CAST(nsIViewSourceChannel*,
this), nsnull);
nsresult rv = mChannel->AsyncOpen(this, ctxt);
if (NS_FAILED(rv) && loadGroup)
loadGroup->RemoveRequest(NS_STATIC_CAST(nsIViewSourceChannel*,
this),
nsnull, rv);
if (NS_SUCCEEDED(rv)) {
mOpened = PR_TRUE;
}
return rv;
}
and
nsViewSourceChannel::OnStopRequest(nsIRequest *aRequest, nsISupports* aContext,
nsresult aStatus)
{
NS_ENSURE_TRUE(mListener, NS_ERROR_FAILURE);
if (mChannel)
{
nsCOMPtr<nsILoadGroup> loadGroup;
mChannel->GetLoadGroup(getter_AddRefs(loadGroup));
if (loadGroup)
{
loadGroup->RemoveRequest(NS_STATIC_CAST(nsIViewSourceChannel*,
this),
nsnull, aStatus);
}
}
return mListener->OnStopRequest(NS_STATIC_CAST(nsIViewSourceChannel*,
this),
aContext, aStatus);
}
Edit:
As I have no clue about how Mozilla works, so I have to guess from reading some code. From the channel's point of view, once the original file is loaded, its job is done. If you want to load the secondary items linked in file like an image, you have to implement that in the listener. See TestPageLoad.cpp. It implements a crude parser and it retrieves child items upon OnDataAvailable:
NS_IMETHODIMP
MyListener::OnDataAvailable(nsIRequest *req, nsISupports *ctxt,
nsIInputStream *stream,
PRUint32 offset, PRUint32 count)
{
//printf(">>> OnDataAvailable [count=%u]\n", count);
nsresult rv = NS_ERROR_FAILURE;
PRUint32 bytesRead=0;
char buf[1024];
if(ctxt == nsnull) {
bytesRead=0;
rv = stream->ReadSegments(streamParse, &offset, count, &bytesRead);
} else {
while (count) {
PRUint32 amount = PR_MIN(count, sizeof(buf));
rv = stream->Read(buf, amount, &bytesRead);
count -= bytesRead;
}
}
if (NS_FAILED(rv)) {
printf(">>> stream->Read failed with rv=%x\n", rv);
return rv;
}
return NS_OK;
}
The important thing is that it calls streamParse(), which looks at src attribute of img and script element, and calls auxLoad(), which creates new channel with new listener and calls AsyncOpen().
uriList->AppendElement(uri);
rv = NS_NewChannel(getter_AddRefs(chan), uri, nsnull, nsnull, callbacks);
RETURN_IF_FAILED(rv, "NS_NewChannel");
gKeepRunning++;
rv = chan->AsyncOpen(listener, myBool);
RETURN_IF_FAILED(rv, "AsyncOpen");
Since it's passing in another instance of MyListener object in there, that can also load more child items ad infinitum like a Russian doll situation.
I think I found it (myself), take a close look at this page. Why it doesn't highlight that the UUID has been changed over versions, isn't clear to me, but it would explain why things fail when (or just prior to) calling QueryInterface on nsIHttpChannelInternal.
With the new(er) UUID, I'm getting better results. As I mentioned in an update to the question, I've posted this on bugzilla.mozilla.org, I'm curious if and which response I will get there.