Currently I am learning to create a Shopify custom app. I am working on metafields. A metafield can be created by
#metafield = ShopifyAPI::Metafield.new()
In form view, I use
<%= bootstrap_form_for #metafield do |f| %>
<% end %>
The form requires me to define shopify_api_metafields_path etc.
Is there a way to define prefix shopify_api to my routes resources :metafields without adding ShopifyApi:: module to my controller?
You could try:
resources :shopify_api_metafields, controller: :metafields
Which will give you:
shopify_api_metafields GET /shopify_api_metafields(.:format) metafields#index
POST /shopify_api_metafields(.:format) metafields#create
new_shopify_api_metafield GET /shopify_api_metafields/new(.:format) metafields#new
edit_shopify_api_metafield GET /shopify_api_metafields/:id/edit(.:format) metafields#edit
shopify_api_metafield GET /shopify_api_metafields/:id(.:format) metafields#show
PATCH /shopify_api_metafields/:id(.:format) metafields#update
PUT /shopify_api_metafields/:id(.:format) metafields#update
DELETE /shopify_api_metafields/:id(.:format) metafields#destroy
I come up with solution by defining a model Metafield which inherit from ShopifyAPI::Metafield and then, I define #metafield = Metafield.new instead of #metafield = ShopifyAPI::Metafield.new
By this way, it will be easier to manage later and it allow us to synchronize data table as well.
Related
I want to make a view for my website coded in RoR wherein all the available path are listed as links. Is there any way to access the views for various models from the program?
For example, something like:
<%model.views.each do |v| %>
<%= link_to v %>
<% end %>
You could use the sitemap_generator or dynamic_sitemaps gem to generate Sitemaps for your application.
You can use named routes, which allows you to create a link to a different part of your rails app, based on names you set in routes.rb. You can also include route parameters, too, which makes it easy to link to models.
In your routes.rb
get 'test_route/:id' => 'example#controller', as :test
In controllers/views:
link_to #example.name, test_path(id: #example.id)
Further reading on named routes
Im not sure why you want this :), but this will give you the routes
Rails.application.routes.routes
if you want to get all the paths as an array
Rails.application.routes.routes.collect {|r| r.path.spec.to_s }
I'm following the tutorial http://guides.rubyonrails.org/getting_started.html but i'm stuck on section 5.2 'the first form'
The error is after i put prodotti_path
<%= form_for :prodotto, url: prodotti_path do |f| %>
my rake routes:
Prefix Verb URI Pattern Controller#Action
welcome_index GET /welcome/index(.:format) welcome#index
prodotti_index GET /prodotti(.:format) prodotti#index
POST /prodotti(.:format) prodotti#create
new_prodotti GET /prodotti/new(.:format) prodotti#new
edit_prodotti GET /prodotti/:id/edit(.:format) prodotti#edit
prodotti GET /prodotti/:id(.:format) prodotti#show
PATCH /prodotti/:id(.:format) prodotti#update
PUT /prodotti/:id(.:format) prodotti#update
DELETE /prodotti/:id(.:format) prodotti#destroy
root GET / welcome#index
but when i refresh the page http://localhost:3000/prodotti/new/ the rails say:
ActionController::UrlGenerationError in Prodotti#new
Why? i'm new to ruby and ror, sorry !
Firstly, welcome to the Rails community!
Here's what you need to do:
#app/controllers/prodottis_controller.rb
class ProdottisController < ApplicationController
def new
#prodotti = Prodotti.new
end
def create
#prodotti = Prodotti.new prodotti_params
end
private
def prodotti_params
params.require(:prodotti).permit(:x, :y, :z)
end
end
Then in your view:
#app/views/prodotti/new.html.erb
<%= form_for #prodotti do |f| %>
<%= f.text_field :attribute_name %>
<%= f.submit %>
<% end %>
OOP
The problem you have is you're using a symbol in your form_for. Whilst this does work, it is not the best way to get it working, especially for a beginner.
Without going into too much detail, I'll explain that form_for is what's known as a helper method. If you pass this certain credentials, it will construct an HTML form for you:
Typically, a form designed to create or update a resource reflects the
identity of the resource in several ways: (i) the url that the form is
sent to (the form element's action attribute) should result in a
request being routed to the appropriate controller action (with the
appropriate :id parameter in the case of an existing resource), (ii)
input fields should be named in such a way that in the controller
their values appear in the appropriate places within the params hash,
and (iii) for an existing record, when the form is initially
displayed, input fields corresponding to attributes of the resource
should show the current values of those attributes.
In Rails, this is usually achieved by creating the form using form_for
and a number of related helper methods. form_for generates an
appropriate form tag and yields a form builder object that knows the
model the form is about. Input fields are created by calling methods
defined on the form builder, which means they are able to generate the
appropriate names and default values corresponding to the model
attributes, as well as convenient IDs, etc.
This basically means that you're meant to pass objects to the form_for helper - objects which have been built in your model and assigned in your controller.
The objects in Ruby are used by Rails throughout your application. Indeed, as Ruby is object orientated, all the things you do with the language, and frameworks, are meant to revolve around objects too.
Rails is object orientated in its own way. Remember, Rails is a framework which sits on top of Ruby. Thus, anything you do has to have objects at the center of the flow:
Models construct the objects in Rails.
Everything from your routes to controller actions take the idea that your models will be invoking data objects -- making it that each "helper" method in Rails (such as form_for) can be used with the corresponding objects you've built.
This is why I recommended setting the appropriate variable and passing it to your form helper. This will tie into your routes and controller actions, and should work for you.
i'v been trying to resolve this error for the past 5 hours and I'm gonna burn my computer if I can't solve this.
undefined method `pushes_path' for #<#:0x007f859d605250> this is the error code I'm getting but i don't understand why.
this is my index.html.erb file inside of the interaction
<%= simple_form_for #push do |f| %>
<%= f.input :payload, as: :text %>
<%= f.input :segment, as: :radio_buttons %>
<%= submit_tag "start the campaign" %>
<% end %>
and this is my interaction controller
class InteractionController < ApplicationController
def index
#push =Push.new
end
end
Push is my table in the database and i'll get the inputs and write them in the database to use them for later one.
and this is my routes file
devise_for :partners
get 'home/index'
get 'segmentation/index'
get 'interaction/index'
root to: "home#index"
i really don't know why its looking for pushes_path, what am i doing wrong?
form_for
The problem you have is that your form_for method is going to try and generate a route based off your #path object. And as such, if you don't have a path created for it, you'll receive the error you're getting:
:url- The URL the form is to be submitted to. This may be represented
in the same way as values passed to url_for or link_to. So for example
you may use a named route directly. When the model is represented by a
string or symbol, as in the example above, if the :url option is not
specified, by default the form will be sent back to the current url
(We will describe below an alternative resource-oriented usage of
form_for in which the URL does not need to be specified explicitly).
The bottom line is that as Rails is object orientated, its built around the assumption that you'll have routes set up to handle the creation of individual objects.
Every time you use form_for, Rails will attempt to construct your routes from your object -- so if you're trying to do the following, it will treat the routes as photo_path etc:
#app/views/pushes/new.html.erb
<%= form_for #push do |f| %>
...
<% end %>
--
Fixes
As #mandeep suggested, there are several fixes you can employ to get this to work:
Firstly, you can just create a route for your push objects:
#config/routes.rb
resources :pushes
Secondly, as you're using a different controller, you'll want to do the following:
#config/routes.rb
resources :interactions
#app/views/pushes/new.html.erb
<%= form_for #push, url: interaction_path do |f| %>
...
<% end %>
This will route your form submission to the interactions controller, rather than the pushes controller that you'll get by default!
Objects
Something to consider when creating Rails-based backends is the object-orientated nature of the framework.
By virtue of being built on Ruby, Rails is centered on objects - a term for a variable, which basically encompasses much more than just a piece of data. Objects, in the case of Rails, are designed to give the application:
Once you understand this, the entire spectrum of Rails functionality becomes apparent. The trick is to realize that everything you do in Rails should be tied to an object. This goes for the controllers too:
--
Ever wondered why you call resources directive in your routes, for a controller? It's because you're creating a set of resourceful routes based for it:
Do you see how it's all object orientated?
This gives you the ability to define the routes for specific controllers etc. The most important thing to note is how this will give you the ability to determine which routes / controller actions your requests should go
--
There's nothing wrong in using the controller setup as you have - the most important thing is to ensure you're able to define the custom URL argument, as to accommodate the non-object based structure
In your index action you have
def index
#push =Push.new
end
and your form has
<%= simple_form_for #push do |f| %>
so your form is looking for /pushes with post verb or pushes_path and you don't have that route in your routes.rb file so to fix this you need to add this in routes.rb:
resources :pushes
Update:
when you add resources :push rails basically creates seven different routes for you. One of which is
POST /pushes pushes#create create a new push
and if you look at the html generated by your form it would be something like:
<form action="/pushes" class="new_push" id="new_push" method="post">
// your fields
</form>
notice the action and verb so when you submit your form your routes are checked for them and since you didn't define them in your routes you were getting this error
And how will i be able to use the params i m getting from this form with this new resource addition?
Your form will take you to pushes_controller create action so first of all you'll have to define them. You can access them simply by params[:pushes] in your controller action but since you want to create a new record so you'll have to permit those attributes, checkout strong parameters
If you are using rails >= 4 then you can do
class PushesController < ApplicationController
def create
#push =Push.new(push_params)
if #push.save
redirect_to #push
else
render 'interaction/index'
end
end
private
def push_params
params.require(:push).permit(:attributes)
end
end
If you are using rails < 4 then instead of permitting these attributes(because strong parameters feature came from rails 4) you'll have to tell rails that these attributes are accessible by writing this in your pushes.rb
attr_accessible :attribute_name
Why it is assuming that its pushes controller?Because of the Push.new creation?
That's because if you look at your index action #push = Push.new so #push contains a push object with nil values(as you have just initialized it) so this is where rails magic comes, rails automatically tries to figure out url of your form and since your #push is only an initialized variable so rails takes you to create action for it. For details you should checkout rails polymorphic urls If you want your form to go to interaction_controller or some other url then you'll have to specify the url option for it
<%= form_for #push, url: "your_url_for_custom_method" %>
// other fields
<% end %>
And in the end you should really read docs
I'm trying to link the input of a form to a specific action in my rails app.
Currently if I go to www.myapp.com/check/:idNumber, I'll be able to trigger the action just fine (which means routes is setup properly?). This action is basically a function call to a ruby/rails script with the parameter "idNumber" being passed to it. If the function is successful, it would return a newly created "Person" object and nil otherwise. This is different than the standard new operation as it determines the the attributes based on some information that it obtained from a database somewhere else.
Rake routes does give me the following:
check /check/:idNumber(.:format) person#check {:id=>/\d+/}
What I'm having trouble implementing is the form itself.
<%= form_tag("/check", :method => "get") do %>
<%= text_field_tag(:idNumber) %>
<% end %>
Controller action:
def check
regCheck = RegCheck.new
#person = regCheck.check_id(params[:idNumber])
if #person.name == nil
redirect_to root_path
end
end
submitting the form above would bring me to myapp.com/check?utf8=✓&idNumber=1234 instead. Can someone tell me what am I doing wrong?
I believe that using the check_path helper that is generated from the routes file is your best bet.
The form should look like this then.
<%= form_tag(check_path) do %>
<%= text_field_tag(:idNumber) %>
<% end %>
Rails forms can be finicky, especially when trying to build really customized forms.
This line
= form_for [#object]
Determines where the form goes, as well as the object that is being implemented. If you want to route the form to a different place, you can user the :url option. This options determines the path of the form, however you must keep in mind that the method is determined by the #object. If it is a new object, the method will be POST, an existing object will use a PUT method.
Let's suppose you want to update an existing object, but you want to send in data for a new object belonging to the existing object. That would look like
= form_for [#object], :as => #child_object, :url => my_optional_custom_path do |f|
# etc...
This generates a form sending a PUT request to the custom url (or the update path for #object if no custom url is supplied. The PUT request is sent with the parameter params[:child_object].
Hopefully this helps!
Best,
-Brian
I don't think it's possible the way you're trying.. The URL for the form is created before the user inputs any data.. So you need to remove the :idNumber from your routing..
If you do you get the following route:
check /check(.:format) person#check
Because the regex is removed now, you need to do this in you're controller:
def check
# Make sure ID is digits only
idNumber = params[:idNumber].gsub(/[^\d]/, '')
regCheck = RegCheck.new
#person = regCheck.check_id(idNumber)
if #person.name == nil
redirect_to root_path
end
end
You're form is allright, but you may want to use check_path like TheBinaryhood suggests..
If you really want it to be check/:idNumber you may also be able to submit the form to another action and redirect it to the right path from there..
So I am creating a website that I want to have an admin directory in rails 1.8.x and I'm struggling a bit to get the form_for to link to the right controller. I am trying to be RESTful. What I basically want is an admin page that has a summary of actions which can then administer sub models such as:
/admin (a summary of events)
/admin/sales (edit sales on the site)
/admin/sales/0 (the normal RESTful stuff)
I can't use namespaces since they were introduced in Rails 2.0 (production site that I don't want to mess with updating rails and all that).
Anyway, what I have in the routes.rb is:
map.resource :admin do |admin|
admin.resources :sales
end
I am using the map.resource as a singleton as recommended by another site.
The problem comes in when I try to use the form_for to link to the subresource RESTfully. If i do :
form_for(:sales, #sale)
it never links to the right controller no matter what I try. I have also tried:
form_for [#admin, #sale] do |f|
and that does not work either (I am guessing since admin is a singleton which does not have a model, it's just a placeholder for the admin controller). Am I supposed to add a prefix or something? Or something into the sales controller to specify that it is a subcontroller to admin? Is there an easier way to do this without manually creating a bunch of routes? Thanks for any help.
You can use controller, action and html options something like following.
<%= form_for :sales, :controller=>controllerName, :action=>actionName, :id=>idParameter}, :html=>{:onsubmit=>"someFunction()"} do |f| %>
|
|
|
<% end %>