I am trying to launch appium in real devices, but everytimee i run i get this error-
selenium.common.exceptions.WebDriverException: Message: An unknown server-side error occurred while processing the command. Original error: Unable to launch WebDriverAgent because of xcodebuild failure: "xcodebuild failed with code 65". Make sure you follow the tutorial at https://github.com/appium/appium-xcuitest-driver/blob/master/docs/real-device-config.md. Try to remove the WebDriverAgentRunner application from the device if it is installed and reboot the device.
It works fine when i run with Simulator, i have installed Webdriver agent in the specific path and have done all the necessary changes but still no luck
Following are the desiredCapability that i used in my app:
desired_caps['udid'] = '7d8dc98c8078f72de8b28fe3934664f70ebc97dc'
desired_caps['platformName'] = 'iOS'
desired_caps['platformVersion'] = '12.1'
desired_caps['automationName'] = 'xcuitest'
desired_caps['deviceName'] = 'Apple’s iPad'
desired_caps['browserName'] = 'Safari'
desired_caps['xcodeOrgId'] = 'DWW94C2HRU'
desired_caps['newCommmandTimeout'] = '15000'
desired_caps['xcodeSigningId'] = "iPhone Developer"
driver = webdriver.Remote('localhost:4723/wd/hub', desired_caps)
driver.get("github.com/")
When i run this command-
xcodebuild -project WebDriverAgent.xcodeproj -scheme WebDriverAgentRunner -destination 'id=' test to verify if everything is working fine it got stuck here in command line-
2019-04-09 07:58:21.311906+0530 WebDriverAgentRunner-Runner[489:69209] ServerURLHere->http://192.168.1.4:8100<-ServerURLHere
Check the cmd line screenshot here
but i do see this according to appium tutorial- Test Suite 'All tests' started at 2017-01-23 15:49:12.585
Test Suite 'WebDriverAgentRunner.xctest' started at 2017-01-23 15:49:12.586
Test Suite 'UITestingUITests' started at 2017-01-23 15:49:12.587
Test Case '-[UITestingUITests testRunner]' started.
t = 0.00s Start Test at 2017-01-23 15:49:12.588
t = 0.00s Set Up
Related
There are so many related issues but nothing solved my issue.
I can run the simulator without any issue, but when running on a real device I get this error
Encountered internal error running command: Error: Unable to launch WebDriverAgent because of xcodebuild failure: xcodebuild failed with code 65
I have done the manual config already.
My environments are :
appium - Version 1.17.1-beta.0
Xcode - Version 11.3.1 (11C504)
So far I have tried with appium versions:
1.13.0
1.15.0
1.15.1
1.17.0
1.17.0
I was able to build the WebDriverAgent to the device without any issue.
The log
If I run
xcodebuild -project WebDriverAgent.xcodeproj -scheme WebDriverAgentRunner -destination 'id=<udid>' test
I get the following result.
Testing failed:
WebDriverAgentRunner:
WebDriverAgentRunner-Runner.app (379) encountered an error (Failed to load the test bundle. (Underlying error: The bundle “WebDriverAgentRunner” couldn’t be loaded because it is damaged or missing necessary resources. The bundle is damaged or missing necessary resources. dlopen_preflight(/var/containers/Bundle/Application/14851F2A-8FB2-4845-9A20-410C9463CEB3/WebDriverAgentRunner-Runner.app/PlugIns/WebDriverAgentRunner.xctest/WebDriverAgentRunner): no suitable image found. Did find:
/var/containers/Bundle/Application/14851F2A-8FB2-4845-9A20-410C9463CEB3/WebDriverAgentRunner-Runner.app/PlugIns/WebDriverAgentRunner.xctest/WebDriverAgentRunner: code signature invalid for '/var/containers/Bundle/Application/14851F2A-8FB2-4845-9A20-410C9463CEB3/WebDriverAgentRunner-Runner.app/PlugIns/WebDriverAgentRunner.xctest/WebDriverAgentRunner'
))
I'm new to ios appium and trying to use appium for app testing which i did not have the source code nor ios developer account, the app is downloaded from crashlytics.
I've tried to modify the certificate for webdriveragent with my personal account but failed. And i saw the document from appium that i should able to use appium with only "app" or "bundleid" capability so i tried to remove the "app" then got another err.
Please advise, thank you in advance.
My capabilities set as below
capabilities['platformName'] = 'iOS'
capabilities['automationName'] = 'XCUITest'
capabilities['platformVersion'] = '11.4'
capabilities['deviceName'] = 'iPhone X'
capabilities['udid'] = 'my phone'
capabilities['bindleId'] = 'app.bundleId'
capabilities['app'] = '/pathtomyapp'
Appium log output
selenium.common.exceptions.WebDriverException An unknown server-side
error occurred while processing the command. Original error: Unable to
launch WebDriverAgent because of xcodebuild failure: "xcodebuild
failed with code 65".
If I remove the "app" from capablities then I get following error
selenium.common.exceptions.WebDriverException: Message: An unknown
server-side error occurred while processing the command. Original
error: The desired capabilities must include either an app or a
bundleId for iOS
https://github.com/appium/appium-xcuitest-driver/blob/master/docs/real-device-config.md
a very comprehensive tutorial how to deal with your problem, you are missing
desired_caps['xcodeOrgId'] = 'YOURDEVID'
desired_caps['xcodeSigningId'] = "iPhone Developer"
I believe that this error normally happens because the wda is in the wrong directory. Which version of appium is this? If it's above 1.7.2 then you'll need to add the capabilities usePrebuiltWDA set to true and derivedDataPath set to the path of the derived data folder of the wda.
https://github.com/appium/appium-xcuitest-driver/blob/master/README.md
Hth
James
I am trying to run sonar swift.
I have already sonarQube with the plugin and I can access it locally using this url http://localhost:9000 . I have installed all prerequisites that you can find here :
https://github.com/Backelite/sonar-swift
But I can't figure out what is this error when i launch run-sonar-swift.sh.
If anyone can bring me the light I would be very grateful.
Here the logs when I run in terminal command ./run-sonar-swift.sh -v :
MacBook-Air:streamus-phoenix-ios oboujaouane$ ./run-sonar-swift.sh -v
Running run-sonar-swift.sh...
Project count is [1]
Xcode project file is: Streamus.xcodeproj
Xcode workspace file is: Streamus.xcworkspace
Xcode application scheme is: Streamus Alpha
Destination simulator is: platform=iOS Simulator,name=iPhone 6,OS=11.3
Excluded paths from coverage are: .Tests.
Creating directory sonar-reports/
Running tests
+ xcodebuild clean build test -workspace Streamus.xcworkspace -scheme 'Streamus Alpha' -configuration Debug -enableCodeCoverage YES -destination 'platform=iOS Simulator,name=iPhone 6,OS=11.3' -destination-timeout 60
2018-05-12 10:34:14.031 xcodebuild[32149:775290] IDETestOperationsObserverDebug: Writing diagnostic log for test session to:
/var/folders/9v/vdbbf4j96hxgcxmtpntznytr0000gn/T/com.apple.dt.XCTest/IDETestRunSession-9A7EF764-6391-4C7D-9F34-066A9DFEC5E9/StreamusUITests-87E838E0-4F8F-4C19-B2AC-C2C0A274E8EC/Session-StreamusUITests-2018-05-12_103414-jhm3wz.log
2018-05-12 10:34:14.032 xcodebuild[32149:769805] [MT] IDETestOperationsObserverDebug: (98FB295E-FE60-46AA-8589-015B0DD2E617) Beginning test session StreamusUITests-98FB295E-FE60-46AA-8589-015B0DD2E617 at 2018-05-12 10:34:14.031 with Xcode 9E145 on target {
SimDevice: iPhone 6 (672DE879-E48B-45DA-BFD9-D0412F51A706, iOS 11.3, Booted)
} (11.3 (15E217))
2018-05-12 10:34:14.061 xcodebuild[32149:769805] [MT] IDETestOperationsObserverDebug: (458F86F6-1492-40F1-9F72-A88FC23BD985) Beginning test session StreamusTests-458F86F6-1492-40F1-9F72-A88FC23BD985 at
2018-05-12 10:34:14.061 with Xcode 9E145 on target {
SimDevice: iPhone 6 (672DE879-E48B-45DA-BFD9-D0412F51A706, iOS 11.3, Booted)
} (11.3 (15E217))
2018-05-12 10:34:14.061 xcodebuild[32149:770075] IDETestOperationsObserverDebug: Writing diagnostic log for test session to:
/var/folders/9v/vdbbf4j96hxgcxmtpntznytr0000gn/T/com.apple.dt.XCTest/IDETestRunSession-9A7EF764-6391-4C7D-9F34-066A9DFEC5E9/StreamusTests-4F203461-1372-49B7-A806-F130F168079E/Session-StreamusTests-2018-05-12_103414-MfIreE.log
2018-05-12 10:34:30.016 xcodebuild[32149:769805]
Error Domain=IDETestOperationsObserverErrorDomain Code=14 "Test operation was canceled. If you believe this error represents a bug, please attach the log file at /var/folders/9v/vdbbf4j96hxgcxmtpntznytr0000gn/T/com.apple.dt.XCTest/IDETestRunSession-9A7EF764-6391-4C7D-9F34-066A9DFEC5E9/StreamusUITests-87E838E0-4F8F-4C19-B2AC-C2C0A274E8EC/Session-StreamusUITests-2018-05-12_103414-jhm3wz.log"
UserInfo={NSLocalizedDescription=Test operation was canceled. If you believe this error represents a bug, please attach the log file at /var/folders/9v/vdbbf4j96hxgcxmtpntznytr0000gn/T/com.apple.dt.XCTest/IDETestRunSession-9A7EF764-6391-4C7D-9F34-066A9DFEC5E9/StreamusUITests-87E838E0-4F8F-4C19-B2AC-C2C0A274E8EC/Session-StreamusUITests-2018-05-12_103414-jhm3wz.log}
2018-05-12 10:34:30.016 xcodebuild[32149:769805] Error Domain=IDETestOperationsObserverErrorDomain Code=14 "Test operation was canceled. If you believe this error represents a bug, please attach the log file at /var/folders/9v/vdbbf4j96hxgcxmtpntznytr0000gn/T/com.apple.dt.XCTest/IDETestRunSession-9A7EF764-6391-4C7D-9F34-066A9DFEC5E9/StreamusTests-4F203461-1372-49B7-A806-F130F168079E/Session-StreamusTests-2018-05-12_103414-MfIreE.log" UserInfo={NSLocalizedDescription=Test operation was canceled. If you believe this error represents a bug, please attach the log file at /var/folders/9v/vdbbf4j96hxgcxmtpntznytr0000gn/T/com.apple.dt.XCTest/IDETestRunSession-9A7EF764-6391-4C7D-9F34-066A9DFEC5E9/StreamusTests-4F203461-1372-49B7-A806-F130F168079E/Session-StreamusTests-2018-05-12_103414-MfIreE.log}
Testing failed:
Linker command failed with exit code 1 (use -v to see invocation)
** TEST FAILED **
The following build commands failed:
Ld /Users/oboujaouane/Library/Developer/Xcode/DerivedData/Streamus-gwtdwpbaxrfgafdtejzjtpxyhhhq/Build/Intermediates.noindex/Streamus.build/Alpha-iphonesimulator/StreamusTests.build/Objects-normal/x86_64/StreamusTests normal x86_64
Ld /Users/oboujaouane/Library/Developer/Xcode/DerivedData/Streamus-gwtdwpbaxrfgafdtejzjtpxyhhhq/Build/Intermediates.noindex/Streamus.build/Alpha-iphonesimulator/StreamusTests.build/Objects-normal/i386/StreamusTests normal i386
(2 failures)
returnValue=65
set +x
ERROR - Command 'xcodebuild clean build test -workspace Streamus.xcworkspace -scheme Streamus Alpha -configuration Debug -enableCodeCoverage YES -destination platform=iOS Simulator,name=iPhone 6,OS=11.3 -destination-timeout 60' failed with error code: 65
In advance thank you,
It seems that error was due to provisioning profile. When I added my Provisioning Profile and try it again the problem was resolved.
Then I had another problem with MessageKit:“Segmentation fault: 11”
It was a CocoaPods Podfile config issue.
So I had to switch compilation mode for Debug from "Single File" to "Whole Module” by click on Pods in Xcode project navigator then select MessageKit in targets of pods then Builds settings tab then in searcher tap ‘compilation mode’ and switch “Single File” to “Whole Module” and re-run script run-sonar-swift.sh

⚠️ each time you make a pod install / update or something that can change pods you have to switch compilation mode for Debug from "Single File" to "Whole Module” for the pod which give you an error when you launch run-sonar.swift.sh with -v for verbose.
After that it was not yet the end of my problems! In fact I had a last problem which was an error with SwipeCellKit pod:
“No such module SwipeCellKit”.
To resolve this problem follow instructions given here https://stackoverflow.com/a/37732248/6188918
Then I tried again and the rest of the script started (SwiftLint, Tailor & Lizard) and I thought this time it was finally good but an error occurred once again a new error message at the end of the script concerning Lizard which was:
ERROR: Error during SonarQube Scanner execution
ERROR: File
MyprojectName/Domains/Repositories/Local/cacheManager.swift can't be
indexed twice. Please check that inclusion/exclusion patterns produce
disjoint sets for main and test files
ERROR: Re-run SonarQube Scanner using the -X switch to enable full
debug logging.
To resolve this inclusion/exclusion I followed the answer given here:
https://stackoverflow.com/a/40150551/6188918
by adding these to line in sonar-project.properties file below sonar.swift.excludedPathsFromCoverage line:
sonar.test.inclusions=**/*Test*/**
sonar.exclusions=**/*Test*/**
I tried again but with parameter -notailor(run script and skip Tailor):
./run-sonar-swift.sh -notailor -v
just to save a little time because tailor take time
And after launch the script... Boom a new error... But it was a known issue:
Error: Caused by: org.sonar.api.measures.PersistenceMode
And the issue is explained here https://github.com/Backelite/sonar-swift/issues/118
So I downloaded this .jar file “backelite-sonar-swift-plugin-0.4-sonar-7-quick-fix.jar” found here https://github.com/Hugal31/sonar-swift/releases/tag/0.4-sonar-7-quick-fix and replace it in plugins of my local SonarQube and try again.
…and this time after an umpteenth launch I finally saw the light 🤪💡
Hope this answer will help and if you have a question don’t hesitate.
Good luck & have fun :)
PS: You’ll find here some options to run script with parameters:
./run-sonar-swift.sh -noswiftlint -v (run script with verbose option and skip SwiftLint)
./run-sonar-swift.sh -notailor -v (run script with verbose option and skip Tailor)
./run-sonar-swift.sh -nounittests -v (if your project does not have scheme configured to be tested launch with this parameter)
If you want more info check in run-sonar-swift.sh script and check around lines 125 ## COMMAND LINE OPTIONS
PS2: I have also opened an issue in sonar-swift GitHub if it can help: https://github.com/Backelite/sonar-swift/issues/138
I had an extra issue with oclint: oclint: Not enough positional command line arguments specified!. So I had to modify the run-sonar-swift.sh script a little bit in order to get it working: https://gist.github.com/Edudjr/79a2379842357c33709aecf040d9ae77#file-run-sonar-swift-sh
And this is a model of my sonar-project.properties: https://gist.github.com/Edudjr/db51907068ea76b116d11d9a9b13f05f#file-sonar-project-properties
I have up-to-date OSX Sierra, up-to-date XCode with applicable plugins, and an iPhone 6 simulator open and ready.
I have followed all the directions at https://flutter.io/setup-macos/#ios-setup.
When I "flutter run" from Terminal, the app fails to install on the simulator with message:
Could not build the application for the simulator.
Error launching application on iPhone 6.
Here is what Terminal said...
Launching lib/main.dart on iPhone 6 in debug mode...
Running pod install... 8.5s
Running Xcode build... 24.1s
Failed to build iOS app
Error output from Xcode build:
↳
2017-11-22 13:13:38.122 xcodebuild[47659:25935636] DVTAssertions: Warning in /Library/Caches/com.apple.xbs/Sources/IDEXcode3ProjectSupport/IDEXcode3ProjectSupport-13510/Xcode3Core/LegacyProjects/Frameworks/DevToolsCore/DevToolsCore/BuildSystem/Runtime/PBXTargetBuildContext.mm:757
Details: unexpected successful exit code from cancelled command <C0009:'CpResource app.flx':P12>
Object: <PBXTargetBuildContext: 0x7fccf1235200>
Method: -createCommandInvocationRecordFromInvocation:
Thread: <NSThread: 0x7fccf2847ea0>{number = 16, name = (null)}
Please file a bug at http://bugreport.apple.com with this warning message and any useful information you can provide.
** BUILD FAILED **
The following build commands failed:
CopyPlistFile /Users/deborah/Desktop/chq_emulator/build/ios/Debug-iphonesimulator/Runner.app/GoogleService-Info.plist Runner/GoogleService-Info.plist
(1 failure)
Xcode's output:
↳
Build settings from command line:
ARCHS = x86_64
BUILD_DIR = /Users/deborah/Desktop/chq_emulator/build/ios
ONLY_ACTIVE_ARCH = YES
SDKROOT = iphonesimulator11.1
=== CLEAN TARGET leveldb-library OF PROJECT Pods WITH CONFIGURATION Debug ===
... list of subsidiary infomation ...
Could not build the application for the simulator.
Error launching application on iPhone 6.
Anyone else out there with advice for how to get Flutter going on the simulator?
Try running your Xcode first and make sure that it's up-to-date. Open the {flutter_project}/ios build on Xcode then try to run the iOS project on the Simulator from there.
If you're still having issues, you can run this command on your Terminal. This should set the path for the active developer directory.
sudo xcode-select --switch /Applications/Xcode.app/Contents/Developer
I am currently using travis-ci to run builds/unit tests on every github checkins I make for my iOS project. One of my unit test deals with iOS keychain store, and locally when I run the unit tests, they all pass.
However, on my travis-ci server, it fails with the following error:
Aug 6 23:01:31 itako16044.miso xctest[2160] <Error>: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x5a8f430> { name = com.apple.securityd, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
I am a n00b when it comes to travis-ci, and some google searches did not yield anything useful. Is there something I am missing? How can I set up travis such that I can write things into the keychain store for iOS (it looks like I cannot access keychain store)?
Are you using xctool? I was having the same problem, but I managed to fix it by using xcodebuild instead. My travis.yml looks like this:
language: objective-c
before_script:
- brew update
- brew install xctool && brew cleanup xctool
script:
- cd NitroKeychain
- xcodebuild -project NitroKeychain.xcodeproj -scheme NitroKeychain -destination 'platform=iOS Simulator,name=iPhone Retina (4-inch)' test
It looks like xctool is having some issue accessing the keychain.
Anyway, you can see my project travis.yml and its settings here: https://github.com/danielalves/NitroKeychain