(Post created on Oct 05 '16)
I noticed that every time I run an image and delete it, my system doesn't return to the original amount of available space.
The lifecycle I'm applying to my containers is:
> docker build ...
> docker run CONTAINER_TAG
> docker stop CONTAINER_TAG
> rm docker CONTAINER_ID
> rmi docker image_id
[ running on a default mac terminal ]
The containers in fact were created from custom images, running from node and a standard redis. My OS is OSX 10.11.6.
At the end of the day I see I keep losing Mbs. How can I face this problem?
EDITED POST
2020 and the problem persists, leaving this update for the community:
Today running:
macOS 10.13.6
Docker Engine 18.9.2
Docker Desktop Cli 2.0.0.3
The easiest way to workaround the problem is to prune the system with the Docker utilties.
docker system prune -a --volumes
WARNING:
By default, volumes are not removed to prevent important data from being deleted if there is currently no container using the volume. Use the --volumes flag when running the command to prune volumes as well:
Docker now has a single command to do that:
docker system prune -a --volumes
See the Docker system prune docs
There are three areas of Docker storage that can mount up, because Docker is cautious - it doesn't automatically remove any of them: exited containers, unused container volumes, unused image layers. In a dev environment with lots of building and running, that can be a lot of disk space.
These three commands clear down anything not being used:
docker rm $(docker ps -f status=exited -aq) - remove stopped containers
docker rmi $(docker images -f "dangling=true" -q) - remove image layers that are not used in any images
docker volume rm $(docker volume ls -qf dangling=true) - remove volumes that are not used by any containers.
These are safe to run, they won't delete image layers that are referenced by images, or data volumes that are used by containers. You can alias them, and/or put them in a CRON job to regularly clean up the local disk.
It is also worth mentioning that file size of docker.qcow2 (or Docker.raw on High Sierra with Apple Filesystem) can seem very large (~64GiB), larger than it actually is, when using the following command:
ls -klsh Docker.raw
This can be somehow misleading because it will output the logical size of the file rather than its physical size.
To see the physical size of the file you can use this command:
du -h Docker.raw
Source: https://docs.docker.com/docker-for-mac/faqs/#disk-usage
Why does the file keep growing?
If Docker is used regularly, the size of the Docker.raw (or Docker.qcow2) can keep growing, even when files are deleted.
To demonstrate the effect, first check the current size of the file on the host:
$ cd ~/Library/Containers/com.docker.docker/Data/com.docker.driver.amd64-linux/
$ ls -s Docker.raw
9964528 Docker.raw
Note the use of -s which displays the number of filesystem blocks actually used by the file. The number of blocks used is not necessarily the same as the file “size”, as the file can be sparse.
Next start a container in a separate terminal and create a 1GiB file in it:
$ docker run -it alpine sh
# and then inside the container:
/ # dd if=/dev/zero of=1GiB bs=1048576 count=1024
1024+0 records in
1024+0 records out
/ # sync
Back on the host check the file size again:
$ ls -s Docker.raw
12061704 Docker.raw
Note the increase in size from 9964528 to 12061704, where the increase of 2097176 512-byte sectors is approximately 1GiB, as expected. If you switch back to the alpine container terminal and delete the file:
/ # rm -f 1GiB
/ # sync
then check the file on the host:
$ ls -s Docker.raw
12059672 Docker.raw
The file has not got any smaller! Whatever has happened to the file inside the VM, the host doesn’t seem to know about it.
Next if you re-create the “same” 1GiB file in the container again and then check the size again you will see:
$ ls -s Docker.raw
14109456 Docker.raw
It’s got even bigger! It seems that if you create and destroy files in a loop, the size of the Docker.raw (or Docker.qcow2) will increase up to the upper limit (currently set to 64 GiB), even if the filesystem inside the VM is relatively empty.
The explanation for this odd behaviour lies with how filesystems typically manage blocks. When a file is to be created or extended, the filesystem will find a free block and add it to the file. When a file is removed, the blocks become “free” from the filesystem’s point of view, but no-one tells the disk device. Making matters worse, the newly-freed blocks might not be re-used straight away – it’s completely up to the filesystem’s block allocation algorithm. For example, the algorithm might be designed to favour allocating blocks contiguously for a file: recently-freed blocks are unlikely to be in the ideal place for the file being extended.
Since the block allocator in practice tends to favour unused blocks, the result is that the Docker.raw (or Docker.qcow2) will constantly accumulate new blocks, many of which contain stale data. The file on the host gets larger and larger, even though the filesystem inside the VM still reports plenty of free space.
TRIM
A TRIM command (or a DISCARD or UNMAP) allows a filesystem to signal to a disk that a range of sectors contain stale data and they can be forgotten. This allows:
an SSD drive to erase and reuse the space, rather than spend time shuffling it around; and
Docker for Mac to deallocate the blocks in the host filesystem, shrinking the file.
So how do we make this work?
Automatic TRIM in Docker for Mac
In Docker for Mac 17.11 there is a containerd “task” called trim-after-delete listening for Docker image deletion events. It can be seen via the ctr command:
$ docker run --rm -it --privileged --pid=host walkerlee/nsenter -t 1 -m -u -i -n ctr t ls
TASK PID STATUS
vsudd 1741 RUNNING
acpid 871 RUNNING
diagnose 913 RUNNING
docker-ce 958 RUNNING
host-timesync-daemon 1046 RUNNING
ntpd 1109 RUNNING
trim-after-delete 1339 RUNNING
vpnkit-forwarder 1550 RUNNING
When an image deletion event is received, the process waits for a few seconds (in case other images are being deleted, for example as part of a docker system prune ) and then runs fstrim on the filesystem.
Returning to the example in the previous section, if you delete the 1 GiB file inside the alpine container
/ # rm -f 1GiB
then run fstrim manually from a terminal in the host:
$ docker run --rm -it --privileged --pid=host walkerlee/nsenter -t 1 -m -u -i -n fstrim /var/lib/docker
then check the file size:
$ ls -s Docker.raw
9965016 Docker.raw
The file is back to (approximately) it’s original size – the space has finally been freed!
Hopefully this blog will be helpful, also checkout the following macos docker utility scripts for this problem:
https://github.com/wanliqun/macos_docker_toolkit
Docker on Mac has an additional problem that is hurting a lot of people: the docker.qcow2 file can grow out of proportions (up to 64gb) and won't ever shrink back down on its own.
https://github.com/docker/for-mac/issues/371
As stated in one of the replies by djs55 this is in the planning to be fixed, but its not a quick fix. Quote:
The .qcow2 is exposed to the VM as a block device with a maximum size
of 64GiB. As new files are created in the filesystem by containers,
new sectors are written to the block device. These new sectors are
appended to the .qcow2 file causing it to grow in size, until it
eventually becomes fully allocated. It stops growing when it hits this
maximum size.
...
We're hoping to fix this in several stages: (note this is still at the
planning / design stage, but I hope it gives you an idea)
1) we'll switch to a connection protocol which supports TRIM, and
implement free-block tracking in a metadata file next to the qcow2.
We'll create a compaction tool which can be run offline to shrink the
disk (a bit like the qemu-img convert but without the dd if=/dev/zero
and it should be fast because it will already know where the empty
space is)
2) we'll automate running of the compaction tool over VM reboots,
assuming it's quick enough
3) we'll switch to an online compactor (which is a bit like a GC in a
programming language)
We're also looking at making the maximum size of the .qcow2
configurable. Perhaps 64GiB is too large for some environments and a
smaller cap would help?
Update 2019: many updates have been done to Docker for Mac since this answer was posted to help mitigate problems (notably: supporting a different filesystem).
Cleanup is still not fully automatic though, you may need to prune from time to time. For a single command that can help to cleanup disk space, see zhongjiajie's answer.
docker container prune
docker system prune
docker image prune
docker volume prune
Since nothing here was working for me, here's what I did. Check file size:
ls -lhks ~/Library/Containers/com.docker.docker//Data/vms/0/data/Docker.raw
Then in the docker desktop simply reduce the disk image size (I was using raw format). It will say it will delete everything, but by the time you are reading this post, you probably already have. So that creates a fresh new empty file.
i'm not sure if it is related to the current topic , but this been a solution for me personally
open docker settings -> resources -> disk image size - 16gb
There are several options on how to limit docker diskspace, I'd start by limiting/rotating the logs: Docker container logs taking all my disk space
E.g. if you have a recent docker version, you can start it with an --log-opt max-size=50m option per container.
Also - if you've got old, unused containers, you can consider having a look at the docker logs which are located at /var/lib/docker/containers/*/*-json.log
$ sudo docker system prune
WARNING! This will remove:
all stopped containers
all networks not used by at least one container
all dangling images
all dangling build cache
I am developing a dockerized application. From time to time I rebuild and run the image/container on my machine to do some testing. To do so I naively executed the following:
docker image build -t myapp .
docker container run -p 8020:5000 -v $(pwd)/data:/data myapp
This seems to work quite well. But today I realized that the docker folder on my machine has grown quite big in the last three weeks (> 200 GB).
So it seems that all the supposedly temporary containers, images, volumes etc. have piled up on my disk.
What would be the right way to solve this? I only need one version of my image, so it would be great everything was simply overwritten every time I start a new test cycle.
Alternatively I could execute a docker system prune, but that seems overkill.
Majority of space is occupied by images and volumes so pruning only them would be better option then docker system prune.
docker image prune
docker volume prune
image prune will clean all dangling images that were untagged from myapp due to a new image built and tag to myapp.
Also as the containers are started for testing/dev, they can be started with --rm for cleaning when stopped.
#docker system df
TYPE TOTAL ACTIVE SIZE RECLAIMABLE
Images 222 0 42.87GB 42.87GB (100%)
Containers 0 0 0B 0B
Local Volumes 10 0 77.68MB 77.68MB (100%)
Build Cache 946 0 7.982GB 7.982GB
From the docker system df command, it seems my docker disk is running out of space. But Docker desktop shows:
So I am confused which one should be the right one to indicate docker space usage?
If you're on a mac/windows, then it means that behind the scenes you're running a VM running linux. That disk size then corresponds to the VM disk size containing the Linux distro, rather than just the docker stuff.
Actually, the RECLAIMABLE column is basically the size and percentage of the resources that aren't in use, there is no container using these images/volumes. In your case, 100% of the images and volumes are in "Idle" so you can remove them if you want, there are some good ways to remove it like docker image prune and docker system prune.
The image that you sent has what you are looking for.
I am currently trying to create docker image with python files and lot of extra packages in requirement.txt.
While I am running the command "sudo docker build -t XXX ." the packages are downloaded and than installed one by one untill I receive an error:
"Could not install packages due to an EnvironmentError: [Errno 28] No space left on device"
I have already did the atomic option of "sudo docker system prune" and all the past docker images are deleted.
Moreover, "sudo docker info" shows that I have 15 GB allocated to docker and while my unsuccesfull docker image size is 1 GB size it is still well below the total memory.
None of the options mentioned here: https://unix.stackexchange.com/questions/203168/docker-says-no-space-left-on-device-but-system-has-plenty-of-space
or here: Docker error : no space left on device
worked. I can create several "failed" dockers of ~1GB with the total size of more than 20GB so it is not an issue of lack of space on my HDD of VM.
So I would be grateful for some more ideas.
The disk partition used by Docker is becoming full during the build. You can see the available and used space on your partitions using df -h. You can either add more space to that partition or you need to clean more files.
The docker system prune only removes unused data (dangling images, unreferences volumes ...). You can clean more space, by deleting images that you don't need. I suggest you take a look at the images you have using docker image ls and explicitly delete unneeded ones using docker image rm <image>.
If you are using Docker Desktop on Mac, go to Preferences and increase the Disk image size. In my case it was displaying that it was full Disk image size: 59.6 GB (59.6 GB used).
Let say I have 10 docker images. In all the 10 docker images many layers are similar.
While using docker save -o, saved image is standalone and therefore images size grow bigger. (~ For 10 images size is around 9GB )
After pulled docker images, I explore:
/var/lib/docker
--- aufs (~3GB only)
--- containers (Few KBs)
--- image (Few KBs)
--- ...
--- mnt
Is there anyway to efficiently export images ?
I also tried copy-paste aufs and image folder to new host. But some containers can't start.
While inspect log:
/usr/bin/sudo must be owned by uid 0 and have the setuid bit set
Note: I already referred this . This question is not duplicate of it. It didn't solve my use case which I mentioned above.
I don't know whether this is a correct approach. But Below method worked for me. I tested with 30 Kolla Openstack Docker Images.
Why I have problem with docker save ?
As I said, I have 30 docker images. While I save using docker save -o <save image to path> <image name>. Total size is 15 GB which is too BIG to portable.
What I did ?
Long Story Short: I copied aufs and image folder carefully.
Step 1:
In the machine you want to export : Make sure you have only images(which are to be export). Remove all the containers which are running and stopped.
In the machine you want to import: Make sure You don't have any images and containers.
Step 2: tar -cvf docker-images.tar /var/lib/docker/aufs /var/lib/docker/image It will zip all of your image layers and its database into a single tar file. Size is only 3 GB
Step 3: In the machine, you want to import images,
tar -xvf docker-images.tar -C /var/lib/docker/.
Now restart docker. service docker restart.