I tried to setup wamp in my windows 64 bit operating system form the below link
http://www.wampserver.com/en/
While setting up it is alerting msvcr120.dll missing wamp error.
Can any one provide how could I fix this issue?
You are missing at least one of Microsofts MSVC C/C++ Runtime libraries required to run Apache/PHP or MySQL.
Look here on the WAMPServer backup repo Down at the bottom you will find a link called
All VC Redistribuable Packages (x86_x64) (32 & 64bits)
Download that ZIP file, it contains all the needed installs for all the needed MSVC Runtimes.
Unzip it, then run each MSVC Runtime version install One-at-a-Time in logical version number order, oldest first.
If you see a dialog saying that the version is installed click the REPAIR button to make sure its correctly installed.
As you are using a 64bit windows and a 64bit WAMPServer, you MUST install BOTH the 32bit AND 64bit MSVC Runtimes.
Once all these are installed, uninstall WAMPServer, manually delete the C:\wamp64 folder and then reinstall WAMPServer. This is required to be absolutely sure that the install works correctly, as without these MSVC Runtimes parts of the install can fail.
Small Note
The first dialog shown by the Install does actually tell you to make sure these runtime libraries are installed before continuing with the install.
During install u after 2 nd step focus on the 3rd step download all link software which start from c++ in it download all which is available and skip when u see error or file not found after all install done u should do further process and its done
Related
while during installing it is showing that {mysqld.exe- system error}-in which it is written that THE CODE EXECUTION CANNOT PROCEED BECAUSE MSVCP120.DLL WAS NOT FOUND. REINSTALLING THE PROGRAM MAY FIX THIS PROBLEM.
The first thing the install of WAMPServer does is remind you to check that you have all the required MSVC Runtime libraries.
If you are not sure that you have evenything, go to the backup repo for WAMPServer here Checks VC++ packages installed MD5 and download the checker, run it, it will tell you what you are missing.
You can also find a full set of 32 and 64 bit runtime libraries on that site as well
All VC Redistribuable Packages (x86) (32bits) MD5
or
All VC Redistribuable Packages (x86_x64) (32 & 64bits) MD5
Download there, they are zip files, unzip whichever one you need and then run each of the library installs one at a time in a logical version number order starting at the oldest to the newest
I've uninstalled my RAD Studio 10.2.2 and installed 10.2.3 in my Win10 development VM. Along the way I uninstalled all the previous 3rd-party libs, including the Jedi GetIt packages, and per the instructions got rid of all the old Jedi source and DCP/DCLs. I'm attempting to install them back into 10.2.3 via GetIt. The JCL libs install fine, but when I try to install JVCL, the installation batch file hangs after compiling the installer and the VM comes to its knees. I rebooted, started taskmgr and watched as the batch file ran - it appears to go into a loop creating many instances of msgfmt. I've tried removing it all again, downloading and installing the 3.8 version myself and running the install batch file by itself, same problem; then backing up to the 3.6 version that had installed OK in 10.2.2, and it does the same thing. If I edit the batch file to skip the language-setup section, the batch file completes OK, but trying to re-run the GetIt update causes it to re-download and replace that batch file. :(
The installer does compile before the languages part of the batch file is reached, so I tried running the installer directly. I assume I'm not passing it cmd line info it needs, because it compiles the 64-bit libs fine but chokes immediately on compiling the 32-bit version of JvCore250.bpl with an unspecified compile error.
Anyone else run into this? Is a solution known?
Turns out to ultimately be a pathing problem. When multiple installations of the IDE exist on a machine (e.g. my VM has or previously had D2007, XE2 and 10.1 on it), the PATH environment variable can be too long - edit the PATH in the system to remove the old/stale paths. Then make sure that the library paths in the IDE includes $(BDSLIB)\$(PLATFORM)\release or you'll get "can't find RTL" when building the packages.
For me the problem is generated from the msgfmt.exe of dxgettext.
msgfmt.exe generates multilanguage messages, for a multilanguage support of jvcl installation.
For the specific problem of msgfmt.exe try to see this: dxgettext and Windows 10
I resolved the problem opened the install.bat file in jvcl folder, and I commented (with ::) every line where the msgfmt is executed.
Attention:
If you use getit I suppose you have to open the folder where jvcl is downloaded and search install.bat (I didn't use getit)
Instead I downloaded jvcl directly from github in my component folder, and I did what is written above in that folder.
I download from tokumx website newest version. When I start mongod I have an error,
bash: ./mongod: cannot execute binary file
Any solution.
The only version available directly from the website is for linux, you'll need to contact them to get an OSX build.
The TokuMX Community Edition downloads featured on the Tokutek site are currently 64-bit Linux only. The system requirements also note that only 64-bit Linux is officially supported.
However, for OS X users there is a Homebrew TAP package available if you want to install binaries for development purposes.
Assuming you have have Homebrew installed, you should be able to install the tokumx-bin package by running the following from your shell prompt:
brew tap tokutek/tokumx
brew install tokumx-bin
Notes:
the package install will fail unless you enter some text when prompted for an email address (though any text including the default "email address" seems to work)
the tokumx-bin package conflicts with the mongodb package as both use the same names for binaries
TokuMX binaries and data files are not interchangeable with MongoDB
I have downloaded the latest version 6.1.1 from the windows installer for 32bit. I have a problem with the installation. The installer checks for software requierements are fulfilled. Out of 4 programs it installs i.e. msys, java, postgre and CsvnEdge, csvnEdge is marked as not installed. Tough in system i can see it is installed. If I cancel the setup and start again, it fails again to find CsvnEdge.
Regards
Anuj
I installed both the Delphi 2009 trial and actual release via the web installer when I received them and experienced the same errors when installing both.
Both times it appears that the core web installer failed when it went to spawn the additional install packages for boost, documentation and dbtools. (It brought up a findfile dialog asking for a setup.msi that didn't exist on my machine). When cancelling out of this, the installer reported a fatal error.
The uninstaller did not appear in my program list, and would did not launch from the installation folder.
Future attempts to bring up the installer had it in a state where it thought Delphi 2009 was already installed and it wouldn't correct or repair or uninstall it.
Step 1
Clean out the registry of all things Delphi 2009.
You're looking for HKLM\Software\Codegear\BDS\6.0 and everything under it. Purge the HKCU equivalent while you're at it.
Search under HKEY.CLASSES.ROOT for anything that contains "CodeGear\RAD Studio\6.0" - assuming you installed into the default folder. Purge all those items from the CLSID level.
Step 2
Clean up Windows Installer using the Microsoft Windows Installer Cleanup utility.
Step 3
I suggest a reboot at this stage.
Step 4
Try to install again.
Good Luck!
The problems seem to originate with the web installer not having all the files needed.
Download the 2009 ISO: http://cc.codegear.com/item/26049
Mounted it using this free tool from Microsoft: http://download.microsoft.com/download/7/b/6/7b6abd84-7841-4978-96f5-bd58df02efa2/winxpvirtualcdcontrolpanel_21.exe (You can burn it to a DVD too)
Then reran the installer. At this point, both the repair and uninstall worked.