I am trying to integrate chatbot (built using Dialogflow) with twitter. I have read the documentation and followed all the steps correctly from Dialogflow's tab. Below given are the keys that I got from Twitter's Developer Console and this keys we have to enter in the Dialogflow's Console
Bot Username :
Consumer Key :
Consumer Secret Key :
Access Token :
Access Token secret :
When I press Start bot after filling the information on the Dialogflow console the only error message displayed is Bot was not started that's it. I referred This Url but didn't found something that could solve my problem.
You have to create the "Dev environments" at https://developer.twitter.com/en/account/environments
I had the same problem for a long time - it was a problem under the hood and wasn't fixable by an end user. I realised this by creating a brand new agent and trying Twitter integration with that - it worked first time!
So I exported my old bot as a zip file (Settings -> Export and Import -> Export as Zip), then created a brand new Dialogflow agent and loaded the zip file into it (Settings -> Export and Import -> Restore from Zip).
The new agent integrated with Twitter without any issues. The only pain was that I had other existing integrations which then needed to be migrated to the new agent.
Related
When I was trying to connect my IBM Watson chatbot to slack, I noticed that slack has optimized their App options for connection and integration, where they generate only 'Bot User OAuth Access Token'.
But IBM Watson slack integration process still asking in the second step: both: OAuth access token and User OAuth Access Token.
I tried to use the same token but doesn't work, I get my chatbot app on my slack workspace but no interaction.
My question is: how can I integrate my IBM Watson to slack with this new changes?
Have you thought about using a different system to Watson? I had a Bot powered by it but jumped shipped when it became difficult to use OAuth.
Finally, it works ;)
I tried to redo it again by understanding the new process, guess what? I find that slack has added again the 'OAuth access token'=> but if you keep following the IBM Watson slack integration steps you will keep facing problems (since it's not updated yet).
Here the steps I had followed:
1) Go to slack and create your app(https://api.slack.com/start)=> click [start Here] => at the bottom of page click [create a slack app]
2) You will be redirected to Building Apps for Slack page.=> click [Bot] widget.
3) Click [review scope to add]=> in the second section_ Scopes_ fill out:
*Bot Token Scopes with :(app_mentions: read, chat:write, im:read ,im: write).
*User Token Scopes with:(im:read, im:write)
4)In same page go to the top f page and click [install App to workspace]=> click [Allow]
5)Then you'll be redirected to OAuth Tokens & Redirect URLs page, copy the 'OAuth Access Token' and 'Bot User OAuth Access Token'=> go to IBM WATSON SLACK INTEGRATION STEP2 and fill it=> you will need also to fill verification token by copy it from slack >basic information> App Credentials section > Verification Token.
6)Follow steps 3 and 4 as mentioned in IBM WATSON SLACK INTEGRATION.
And OPPPAAA you have your bot app in your slack space work in app menu ^__^.
P.S In 6) you may receive in the top of slack page notification ( reinstall .....), just do by clicking in the notification or you will face PB in your app test.
I'm using Azure Log Analytics to write application logs to it, like trace and error logs and also audit logs.
I would need to be able to query this log data in my web application in a flexible way (no static searches), so I came up to their REST API, like described here:
https://dev.loganalytics.io/
For some reason the authentication for query the data is different than inserting new data to the log, which I already did successfully with building a signature using the workspace id and key.
According to the documentation when using the search API I need to register my app with their AAD service, so I tried to follow the steps described in here:
https://dev.loganalytics.io/documentation/Authorization/AAD-Setup
My log analytics registration:
Log analytics registration
So I tried to create the app registration and tried to add permissions:
App Registration
And then I want to choose "Log Analytics" in the API access - but "Log Analytics" is not listed there!
As can see in this image:
API List
Why Log Analytics is not listed here? Am I'm doing something wrong?
You need search for Log Analytics API in the "Select an API" menu, then you could see this. It is not in the default list.
I am trying to implement google sign in using firebase in to my iOS app. I follow this tutorial.
https://firebase.google.com/docs/auth/ios/google-signin
I have setup the iOS app in firebase and use the google clientID and reversedClientID from the dowloaded GoogleService-Info.plist.
FYI: I have a custom sign-in button instead of the google sign in button. Anyway when i click the sign in button, google following error display in a webview.
I know my problem is the same as which described in this question.
Google 400 Error: invalid request Custom scheme URIs are not allowed for 'Web' client type
But, in my case, I have created the app in Firebase still I get the error. Any idea please...
The first step is to check if you have already the OAuth 2.0 ID for iOS. To do this please open the Credentials page in the API Console. I hope you will find iOS client for your application under OAuth 2.0 client IDs section. If not, please follow this Guide
The second step is to replace the Web Client ID with in iOS Client ID from OAuth 2.0 client IDs section. To do this, you should open the GoogleService-Info.plist and modify following keys: CLIENT_ID with [value].apps.googleusercontent.com and REVERSED_CLIENT_ID with com.googleusercontent.apps.[value].
if you're using flutterfire ui package you need to change the client id parameter in your GoogleProviderConfiguration class with the iOS client id,
you can copy it from here Credential page
example:
providerConfigs: [
GoogleProviderConfiguration(
clientId: "your copied key here"),
]
re-build you're app and you should be good to go
I've just faced this same issue using flutterfire_ui on Flutter.
The error appears to be from a couple of things. As Valeriy points out you need the ios client ID. But I still got the error if I used the scopes
openid
"https://www.googleapis.com/auth/userinfo.email",
"https://www.googleapis.com/auth/userinfo.profile",
Instead change these to
openid
email
profile
Strangely the opposite is true for Android, where the WebID and the first of the scopes should be used.
It also pays to be aware of the OAuth Content Screen..
In google cloud go to APIs & Services > OAuth consent screen > Edit.
You can add scopes here and fix any missing required fields that Firebase might not be filling out (I had 1). I believe this takes a while to propagate after a change, so give it an hour.
When I am signing into Gmail in my iOS App, I am getting the below error (screenshot) and the sign-in fields do not appear. We are loading the sign-in screen in a WKWebView.
We are using a custom URI redirect but why is google throwing this error now. What are the alternatives to a custom URI?
Swift 2.3 project
Using OAuthSwift v0.6.0 cocoapod
This started quite recently only in the past week or so I believe something changed with Google's APIs.
I have read that google is deprecating webviews for OAuth and will block requests on April 20, 2017. As seen here in a Google Developers Blog:
https://developers.googleblog.com/2016/08/modernizing-oauth-interactions-in-native-apps.html
Does this mean I already need to use or is there another viable solution? I thought I had more time before needing to update this.
My guess is that your client is registered incorrectly in Google Cloud Console. A 'WEB' client is typically a server or Javascript application. An iOS app should be registered as an iOS client.
https://developers.google.com/identity/protocols/OAuth2InstalledApp#creatingcred
I Just found this problem too.
Please check google developer console and look at the credentials keys
Your Client ID in google-info plist must come from iOS application, not the web.
And use that Client ID to be revereseClientID and copy it in to URI type
I have solved the problems by create project in Fire Base Because REVERSED_CLIENT_ID generate from developers.google.com Incorrect.
Try create your project in FireBase
https://console.firebase.google.com
you must cross check clientId at your 'Google Dashboard' clientId and clientId at "GoogleProject.Plsit".if both are different, copy ClientID from 'Google Dashboard' and paste it on "GoogleService-Info.Plsit".and also amend your reverseClientId in "GoogleService-Info.Plsit" according to newly pasted ClientID(you check the pattern how reverseClientId created from client Id in "GoogleService-Info.Plsit"). And then paste thid reverseClientId in 'URL type' in your project setting.
In case of mine clientId on "GoogleService-Info.Plsit" and my 'Google Dashboard' were different.
chech your google dashboard here : https://console.developers.google.com/apis/credentials?project=firebase
I just experienced this issue following the Google Signin for iOS Guide. The plist generated file is not the good one. You need to take a look at the clientID and reversedClientID and be sure that they are the ones for the iOS app on your Google developer portal.
I faced this error after previously creating a GoogleService-Info.plist file using the site Google Sign In directs you to. I later started using Firebase, which seems to create a separate .plist file. After attempting to include Firebase's new .plist file, my Google Sign In button started yielding the invalid_request error with the Custom scheme URIs are not allowed for WEB client type message.
In order to fix the problem I tried many things, but in the end deleting MY ENTIRE Firebase project on their web console (not just the individual app), recreating a new Firebase project from scratch, and re-downloading the new .plist file, solved the error.
It creates two client ID. one for web and one for iOS application. Web client will be in the google plist by default. So it gives the above error. Use iOS Client id from google console or create credential for iOS application.
For my experience, I had followed Google's SignIn iOS Swift guide and had downloaded a Web OAuth JSON file. They literally provide you the wrong Plist file for an iOS setup.
Just in case somebody else runs into this issue here are the steps I followed:
Go to the Google Developers console.
Go to the Credentials section.
Notice there are two items in the "OAuth 2.0 client IDs" section. (If you previously attempted to configure an iOS Google SignIn project.
Click on the name of the "iOS client for ".
Click "Download PLIST File".
Delete the Google web Plist file from your project.
Drop in the new iOS based Plist file.
Copy over the new REVERSED_CLIENT_ID into your URL Types of the Info page of your project. (This is detailed in Google's guide).
Attempt to run your app again.
Note: I got the Google Sign In API to work with Swift v3 and XCode v8.
I was getting the same error. Then I figured out, that I did not provide my app Bundle Id to access the Google Sign In Service in my app.
You do that from the page with the link:
https://developers.google.com/mobile/add?platform=ios&cntapi=signin&cnturl=https:%2F%2Fdevelopers.google.com%2Fidentity%2Fsign-in%2Fios%2Fsign-in%3Fconfigured%3Dtrue&cntlbl=Continue%20Adding%20Sign-In
1.Sign in with your Google Developer account.
2.Create you app name and copy the App bundle Id from your project from:
Project and Target List> General> Bundle Identifier.
3.Choose your Country
4.Enable Google- Sign In.
Then perform the necessary steps to integrate Google Sign In in with your iOS App.
I was facing the same issue. I followed all the instructions to integrate my app several times, and played with the code to see if there was any hidden issue in the code.
I downloaded and configured the sample app from google at github https://github.com/googlesamples/google-services and go the same issue, so it was not the code.
It seemed like there is something in my console configuration so I switched between different google console apps, and played changing the bundle IDs.
The only thing that managed to fix this issue was to use Firebase instead. I created an app in the firebase console, downloaded the new plist, and it worked.
Still not sure why this didn't work for me in the first place, this doesn't seem to be a common problem, but I hope this helps someone.
cheers,
Kindly check console.developers.google.com/apis/credentials for your project and see whether there is already a client_id in OAuth 2.0 client IDs section , if so then copy that client id and replace it with you GoogleService-Info.plist file's CLIENT_ID and accordingly change REVERSED_CLIENT_ID (in reverse manner) now clean and build your app and test it will work
I was using Meteor with Cordova and Meteor's official google integration, which relies on cordova-plugin-googleplus.
I had to:
create both an iOS and a web Client ID
use the web Client ID on the settings / server / database as documented
but then use the reverse of the iOS web client as the REVERSED_CLIENT_ID for cordova-plugin-googleplus
Expo, authentication with Google.logInAsync from expo-google-app-auth
In my case I just used androidClientId instead of androidStandaloneAppClientId
Currently i am working on one of old project within that there is a client id and client secret. Now i want to update those with new client id and client secret using another Developer account. I followed each and every step from
https://developers.google.com/+/mobile/ios/getting-started
Google APIs Console - missing client secret
But i can see only client id. Where is the client secret ?
Here i can see only client id
Hey this is step by step process ,hope this helps you...
Step 1:
Goto Google Developer console and create new app
Step 2:Enable the google plus api
You can see the enable api in the Enable API's tab which is next to API Library ,which is visible in second image.
Step 3: Goto to credential in API & auth tab then select credentials option
select the type of authentication you require
then you will can see the configure consent screen configure the page with the information you wish to provide .
Step 4: Select the web Application option on top
and enter required url's
and finally click create button
once you do that ..you can see ...client id and client secret key...
When in iOS, the application type of the OAuth credential should be 'iOS'.
And then you should pass an empty string as the client secret in your code.
Keeping a secret (that is global to the entire application, not unique per user) in an app is NEVER EVER secure. See https://developer.okta.com/blog/2019/01/22/oauth-api-keys-arent-safe-in-mobile-apps This is an amazing article, please spend as much time as needed to understand it.
Because it can't be kept secure, using client secret in iOS is the old, outdated approach. Nowadays you want to use proof-key-code-exchange (PKCE). It's also explained in above link, but in short:
Generate a secret key in iOS, it is one time use for that one specific login
Only send the hash of the key to the login authority (Google). The original has not left the app yet
To get the tokens, you send: <AuthorizationCode,ORIGINAL secret> AuthorizationCode is also a one time use
Google can compare the "original secret" to the previously sent hash. It therefore knows you are not an attacker that has stolen the AuthorizationCode
Back to the question. Google let's you create different types of "Apps":
Web application: Has a client secret (It's on a backend server, not on a publicly accessible iOS app)
iOS app: Has "iOS URL scheme" instead. There are frameworks that use this URL scheme and do the steps I described above for you (including PKCE). Disclaimer: I'm not an iOS developer, but I'm 99% certain