I've opened my 1 month old project and when I try to build it showing me error.
error: The sandbox is not in sync with the Podfile.lock. Run 'pod install' or update your CocoaPods installation.
and when I try to install 'pod install' or update 'pod update it shows me following error.
[!] Oh no, an error occurred.
Search for existing GitHub issues similar to yours:
https://github.com/CocoaPods/CocoaPods/search?q=%5B%21%5D+Xcodeproj+doesn%27t+know+about+the+following+attributes+%7B%22inputFileListPaths%22%3D%3E%5B%5D%2C+%22outputFileListPaths%22%3D%3E%5B%5D%7D+for+the+%27PBXShellScriptBuildPhase%27+isa.%0AIf+this+attribute+was+generated+by+Xcode+please+file+an+issue%3A+https%3A%2F%2Fgithub.com%2FCocoaPods%2FXcodeproj%2Fissues%2Fnew&type=Issues
If none exists, create a ticket, with the template displayed above,
on: https://github.com/CocoaPods/CocoaPods/issues/new
Be sure to first read the contributing guide for details on how to
properly submit a ticket:
https://github.com/CocoaPods/CocoaPods/blob/master/CONTRIBUTING.md
as shown following screenshot
What I've done
Delete Drive Data
Close xcode, restart system
Delete pods 'deintegrate pod'
But When I hit command 'pod install' it give me error.
Kindly help me where is issue and how to fix this.
Thanks
I would suggest you to update Ruby using Homebrew- https://brew.sh, this package manager comes out useful in many cases, after you installed it you can run brew install ruby in terminal in order to install the latest ruby version.
Here's what Ruby wrote:
Homebrew is a commonly used package manager on macOS. Installing a Ruby using Homebrew is easy: brew install ruby This should install the latest Ruby version.
Source: https://www.ruby-lang.org/en/documentation/installation/
Related
I have installed Appboy 2.22 using CocoaPods.
I'm getting the following error in my AppDelegate when I try to #import "Appboy-iOS-SDK/AppboyKit.h":
Appboy-iOS-SDK/AppboyKit.h not found.
Make sure that you are using Ruby 2.0.0 or higher.
To check, run ruby -v in terminal.
If ruby needs to be updated, follow instructions here.
Next, make sure that your Podfile includes pod 'Appboy-iOS-SDK' for all applicable targets. Then run 'pod install' in terminal.
For more details, Braze has setup instructions for Appbor-iOS-SDK using CocoaPods here.
Hope this helps.
I have application using Rails 4 and Ruby 2. I started to use mongoid-paperclip and it is working fine.
I installed ImageMagick-6.8.6-8. I added Paperclip.options[:command_path] = "/usr/local/bin/" in development.rb. And I have
mongoid-paperclip
rmagick (~> 2.13.2)
cocaine (0.5.1)
When I added "has_mongoid_attached_file :avatar, :styles => { :small => "160x160!" }" I started to get this error: Paperclip::Errors::NotIdentifiedByImageMagickError: Paperclip::Errors::NotIdentifiedByImageMagickError
Any help please I spent hours and hours without any luck.
NOTE: This solution is for OS-X machines and imagemagick installed via "brew"
Some of my students (I teach Rails at a dev bootcamp) had the exact same problem on their Mac OS-X machines. And, the following solution fixed them all.
The Cause
The cause of the problem is that jmagemagick is compiled using a wrong GCC compiler in your box. Although it probably has compiled into an executable (binary), however, when it runs, it fails due to linking errors (it's trying to dynamically load some dependencies, ie, libraries).
The Solution
You need to reinstall imagemagick using a correct GCC. If you have a Mac, please, follow the instructions below:
Open XCode program (if you don't have it, install it)
Go to Preference and open "Download" tab
Download "Command line tool"
After download is complete, open a terminal
Run "brew reinstall imagemagick"
That should do it!
When using brew install imagemagick, it seems to install a precompiled binary that lacks TIFF support. Use this to install ImageMagick with proper TIFF support:
brew install libtiff
brew reinstall imagemagick --with-libtiff
(Credits to Groveriffic: https://stackoverflow.com/a/13150641/235297)
1- I have the same issue, and I solved it, when i configure the dynamic linker run-time bindings to create the necessary links and cache to the most recent shared libraries using the ldconfig command.
So you need to use the following command:
sudo ldconfig /usr/local/lib
Actually, I advice to re-install imagemagick using steps at how-to-install-image-magick-and-setup-paperclip.
2- You need to add the following code in development.rb file:
Paperclip.options[:command_path] = "/usr/local/bin/"
Running these two commands did the trick for me. Remember to use the --force since libtool is keg-only
brew install libtool --universal
brew link libtool --force
First off, I'm sorry for any silly mistakes on my part. I'm just starting with OneMonthRails, and this is all very new to me. My problem is with Homebrew and git. I'm told that my problem has to do with environmental variables, and I've done enough research to be confident this is correct. Ok, here's the details:
I've tried to install Homebrew, but ran into a snag with Xcode being absent. Was running OSX 10.6.8, and had to upgrade to at least 10.7.x to install the latest Xcode. I upgraded to OSX 10.8.4 and installed Xcode and reran the following line
$ ruby -e "$(curl -fsSL https://raw.github.com/mxcl/homebrew/go)"
I get the following script:
==> Installation successful!
You should run `brew doctor' *before* you install anything.
Now type: brew help
I am installing Homebrew so that I can install ImageMagick in order to run the Paperclip gem, so I take the advice of my Terminal about running $ brew doctor.
$ brew doctor
produces the line
Warning: Experimental support for using Xcode without the "Command Line Tools".
You have only installed Xcode. If stuff is not building, try installing the
"Command Line Tools" package provided by Apple.
Warning: Broken symlinks were found. Remove them with `brew prune`:
///long list of broken symlinks///
Warning: An outdated version of Git was detected in your PATH.
Git 1.7.10 or newer is required to perform checkouts over HTTPS from GitHub.
Please upgrade: brew upgrade git
I want to know what my git version is so I run the following script:
$ git --version
and that produces the following line:
git version 1.7.9.6
I identify where my git is located:
$ which git
and that brings:
/opt/sm/pkg/active/bin/git
After some more research, I find out that I can upgrade my git with the following script:
$ brew install git
The final line of the resulting script is a warning:
Warning: This keg was marked linked already, continuing anyway
==> Summary
🍺 /usr/local/Cellar/git/1.8.3.2: 1325 files, 28M, built in 45 seconds
I verify my git upgrade
$ git --version
git version 1.7.9.6
sudo think...maybe I need to run upgrade instead of install.
///restart computer///
$ brew upgrade git
Error: git-1.8.3.2 already installed
hmm... try doctor again
$ brew doctor
Warning: Experimental support for using Xcode without the "Command Line Tools".
You have only installed Xcode. If stuff is not building, try installing the
"Command Line Tools" package provided by Apple.
Warning: "config" scripts exist outside your system or Homebrew directories.
`./configure` scripts often look for *-config scripts to determine if
software packages are installed, and what additional flags to use when
compiling and linking.
$ git --version
git version 1.8.3.2
YAY! I DID SOMETHING RIGHT! Now to finish with Homebrew so I can move on to installing ImageMagick:
$ brew doctor
Warning: Experimental support for using Xcode without the "Command Line Tools".
You have only installed Xcode. If stuff is not building, try installing the
"Command Line Tools" package provided by Apple.
Warning: "config" scripts exist outside your system or Homebrew directories.
`./configure` scripts often look for *-config scripts to determine if
software packages are installed, and what additional flags to use when
compiling and linking.
Arrg... I just installed Xcode. How do I install Command Line Tools? And what is this config Warning? I check it on StackOverflow, and it leads me here:
(.../questions/15225312/brew-doctor-gives-out-warnings)
I don't exactly know what I'm doing, so the following is kinda stupid
$ $PATH
nope
$ echo $PATH
nothing...
$ export PATH=/sm/pkg/active/bin/
nothing
$ export PATH= /sm/pkg/active/bin/
-bash: export: `/sm/pkg/active/bin/': not a valid identifier
(notice the space after the =)
I realize just how much I don't know what I'm doing, so I ask for help
$ brew help
-bash: brew: No such file or directory
uh oh...
$ brew doctor
-bash: brew: No such file or directory
I think I broke my computer, guys. What should I do??? I need to get Homebrew functioning so that I can install the ImageMagick image processor and use the Paperclip gem in Rails.
:((
I know it's super frustrating and some what confusing to get this all to work. Been there, done that.
There are a couple things at play here, so take them one at a time (in fact. I'm just guessing some stuff so I'm happy to update this answer as you let me know more)
Let's start with:
Warning: Experimental support for using Xcode without the "Command Line Tools". You have only installed Xcode. If stuff is not building, try installing the "Command Line Tools" package provided by Apple.
Installing command line tools is highly recommended. It's going to install gcc and other tools that help compile the code that homebrew downloads.
Open Xcode.
Open Preferences.
On the top bar, choose "Downloads"
Install "Command line tools"
Second, I'm not sure how you quite blew away your path. I would first see if you just messed up this terminal and if you close it and start a new terminal window if your PATH is okay.
However, failing that, here's a path that has some basic search paths that will help you get on your way:
export PATH=/usr/local/bin:/usr/bin:/bin:/sbin:/usr/sbin:/usr/local/sbin
You should probably check your .zshrc/.zsh_profile or .bashrc/.bash_profile and see what you are setting your PATH to.
You won't want the space on either side of the = when you are typing that command.
I recently tried the upgrade from 10.6 to 10.8 (to install rails, bundler, RVM) and had lots of the same problems with brew and RVM conflicting AND having their own separate problems (PATH, permissions/non-writable folders, old versions XCode etc). It went off without problems after i tripled backed up everything (TMachine, git and manually copying selected directory trees) and did the clean Mountain Lion install off a USB drive.
If you're only having PATH problems, you could edit it manually/temporarily (until next time .bashrc is run, per comment to the answer: Brew doctor gives out warnings
I am trying to update ruby and rails on my system (osx 10.8.2)
When I run
rvm install 1.9.3 --with-gcc=gcc-4.2
I get the following error:
You requested building with 'gcc-4.2' but it is not in your path.
2 questions; how do I install using gcc-4.2 (I have installed command line tools in xcode)?
Also, How do I get it to the correct path?
Any help in this issue would be greatly appreciated.
If you're not using Homebrew already, you'll probably want to install it, along with the apple-gcc42 package. This script will do that for you, but you'll probably just want to manually run the parts of it that you want: https://github.com/thoughtbot/laptop/blob/master/mac
Try installing using this package: https://github.com/kennethreitz/osx-gcc-installer
I'm getting this error when I try to run any brew command.
Holger-Sindbaeks-MacBook-Air:~ holgersindbaek$ brew help
-bash: /usr/local/bin/brew: /usr/bin/ruby: bad interpreter: No such file or directory
I have absolutely no idea on how to fix this and been searching for a long time without answer.
I got this error (much the same):
/usr/local/bin/brew: /usr/local/Library/brew.rb: /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby: bad interpreter: No such file or directory
/usr/local/bin/brew: line 26: /usr/local/Library/brew.rb: Undefined error: 0
and fixed by the solution below:
Open brew.rb:
$ sudo vim /usr/local/Library/brew.rb
Change the first line's 1.8 to Current:
Before:
#!/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby -W0
After:
#!/System/Library/Frameworks/Ruby.framework/Versions/Current/usr/bin/ruby -W0
Then brew works for me. Hope it helps if any other one got this issue. :)
If you get the error
Homebrew requires Leopard or higher. For Tiger support, see:
https://github.com/mistydemeo/tigerbrew
change the MACOS check from <10.5 to <10.
Tip by #TimCastelijns:
10.5 doesn't work because in comparison, it's higher than 10.10 (.1 vs .5). I added a check (and MACOS_VERSION != 10.10) instead of lowering from 10.5 to 10.
What you are getting means that Homebrew has not been able to locate the Ruby interpretter at the specified location.
Install Apple Developer Kit (comes with Xcode) which should be available to you as an optional install (or you can simply download it from Apple). This will install the Ruby interpreter for you.
In case you already have Xcode installed, this means that one of these things is happening:
You have a broken Ruby installation
You have more than one Ruby installation
Your installation has not been configured properly.
To identify if this is the first case, you can run ruby and see if you get any response.
If you don't, your installation is broken and you need to reinstall it. If you do, you then run which ruby. This should give you the absolute path to your Ruby executable. If this is anything other than /usr/bin/ruby then homebrew (and a bunch of other programs) will not be able to find it.
In case you have not ever tampered with your Ruby installation, you can check to see if /usr/bin/ruby already exists or not: cat /usr/bin/ruby. If you get No such file or directory, then you can easily create a symbolic link to your Ruby installation. Assuming the output of which ruby to by /usr/local/bin/ruby, you create the symbolic link this way: sudo ln -s /usr/local/bin/ruby /usr/bin/ruby and all should be well.
If there is a file at that location, you can run file /usr/bin/ruby to see if it's a real file, a symbolic link, or a corrupted file. If it is a symbolic link, your installation should be working, and since it's not, it probably is either a corrupted symlink or it's a bogus file.
You can remedy that by first deleting it (sudo rm /usr/bin/ruby) and then creating a new symlink to the correct location (sudo ln -s /usr/local/bin/ruby /usr/bin/ruby).
If non of the above works, you should consult the homebrew team after a clean install of Xcode and removing any traces of a Ruby installation on your system.
EDIT
Alternatively, as pointed out by the other answers, the issue might be because of a bad ruby version in your Homebrew settings.
A quick fix might be updating your Homebrew:
cd /usr/local
git pull -q origin refs/heads/master:refs/remotes/origin/master
If this does not help, you might want to get your hands dirty and manually fix the problem by:
Editing brew.rb from /user/local/Library/brew.rb
Changing /1.8/ to /Current/ in the first line, which will cause the hashbang to point to the current Ruby version as the executor
If this does not help, either, you can also modify the MACOS check and change it from 10.5 to 10 to avoid the infamous "Homebrew requires Leopard or higher" error.
DISCLAIMER
A bunch of thanks to other contributors in the answers below and their commenters. I am not committing plagiarism, simply aggregating the answers into one integrated article to help others.
Fix:
sudo gem install cocoapods
At the risk of oversimplifying things, try running
gem install bundler
I was transitioning my Ruby environment from RBENV to RVM and it worked for me.
This happened because I needed to update brew - in the updated version it already uses Current ruby
cd /usr/local
git pull -q origin refs/heads/master:refs/remotes/origin/master
This solved the problem
You need to change the path for Ruby.Framework
I solved it with commands as mentioned.
brew install cocoapods --build-from-source
brew link --overwrite cocoapods
If you have a lower version below Xcode 11, you have to remove it before you use the above commands.
Reference: Ruby Framework issue
None of the above worked for me, so I kept browsing and found this answer,
https://stackoverflow.com/a/24225960/1359088
which did fix brew for me. He says in step 1 to install XCode 6 command line tools, but doesn't say how; use this command:
xcode-select --install
I got the same issue when updated to MacOSX High Sierra & using Xcode 9 with that. High Sierra update ruby gem to version 2.3 but xcpreety command of Xcode 9 still using Ruby 2.0 which is unable to find now & gives bad interpreter.
Just go to Terminal & run
sudo gem install xcpretty
Restart Xcode & do fresh clean build it works for me.
Hope it helps!!!
After upgrading to macOS High Sierra, get it fixed with following commands:
sudo gem install cocoapods
In my case seems like fastlane installed incorrectly with brew install fastlane system didn't write correct path to fastlane. I fixed it with alias fastlane=~/.fastlane/bin/fastlane
I solved it with commands as mentioned.
1.) Uninstall your GEM.
gem unistall GEM
2.) Then Install your GEM.
sudo gem install GEM -n /usr/local/bin
I got bad interpreter: No such file or directory error when used xcpretty and xcpretty-travis-formatter on upgraded MacOS.
To solve it
gem install xcpretty
gem install xcpretty-travis-formatter
That is why I can recommend you to reinstall failed component gem install <name>
#For example error looks like
/usr/local/bin/xcpretty-travis-formatter: /System/Library/Frameworks/Ruby.framework/Versions/2.3/usr/bin/ruby: bad interpreter: No such file or directory
#use
gem install xcpretty-travis-formatter