For e.g. when clicking the link within email, I got redirected in browser to http://0.0.11.184/users/confirmation?confirmation_token=rcqn2fYMdAYYwZ-d_fXh
with error message:
This site can’t be reached
The connection was reset.
Try:
Checking the connection
Checking the proxy and the firewall
ERR_CONNECTION_RESET
I have my entire repo up at https://github.com/cheese1884/197451.git as I'm not sure which codes I am to post up online here for possible faults. Just need this to work in development mode.
Found the solution in Mailcatcher. Thanks guys!
Related
I am trying to configure JDBC but kept getting the same error I am getting using snowsql:
250001 (08001): Failed to connect to DB. Verify the account name is correct: JG3409.canada-central.azure.snowflakecomputing.com:443. 000403: 403: HTTP 403: Forbidden
If the error message is unclear, enable logging using -o log_level=DEBUG and see the log to find out the cause. Contact support for further help.
Goodbye!
I have configured the config file, and I have double checked the account, company, region, reset password to only use alphanumeric.
I have used both forms of the URL
The only possibility is that I am using a trial account, but I can't imagine that this would limit external non-browser connections?
I use a simple user/password, I have whitelisted my IP and I don't have a problem with a proxy or a firewall. I can successfully connect using a browser.. using:
https://app.snowflake.com/canada-central.azure/jg63409
Important contents of the config file:
[connections]
accountname=JG3409
#accountname=uegxydq-pz20606
region=canada-central.azure
username=ASHSNOWFLAKE
any ideas?
Your account is not JG3409 but JG63409 based on this link:
https://app.snowflake.com/canada-central.azure/jg63409
Try in your browser:
https://jg63409.canada-central.azure.snowflakecomputing.com
I found out using snowcd that my computer could not connect via my home router.
When I used my personal hotspot on my (5G) phone, snowcd passed all the tests immediately. The problem then arose how to adjust the network security policy to allow a CIDR block of network addresses through since my phone uses a new address every time I connect, and I can't edit the policy to allow my phone while connected via my phone (for obvious reasons)
Catch 22
123.45.0.0/16 is not accepted in the new Snowflake UI, and 0.0.0.0 doesn't work for me, but the documentation gave me a clue.. the new UI doesn't separate by commas, so I switched to the old UI and voila!
Incidentally the OLD UI uses the same URL as SnowSQL so I picked up my error in my account number there as well (although I should have seen it earlier).
Diabolical but thanks #Sergiu too!
my mailer can't work because of this error. I can't understannd why. I use G-suite for my email.
Thanks very much for your help !
I had the same problem, recently Google really blocked the access to less secure apps.
But, you could resolve it turning on the 2 steps verification log in, and then the option app password should be allowed. this feature was created to applications that cant' make the 2 steps verification. Google will register a diferent password to be only accessed from this app.
https://www.google.com/settings/security
https://support.google.com/accounts/answer/185833?hl=pt-BR
Reason: Google was blocking access from unknown location (app in production)
Solution: go to following link and turn on https://www.google.com/settings/security/lesssecureapps
I want to start my Dropbox-app by linking to a dropbox account as specified here:
https://www.dropbox.com/developers/datastore/tutorial/js
However, dropbox won't redirect back to my website and throws "Invalid redirect_uri"
I specified various redirect urls and double checked my app_key, but i could not get it to work. What am i doing wrong?
Thanks in advance!
When I had this issue, I realized that when refreshing the dropbox app console page, it hadn't saved my domain value. Apparently, ONLY HTTPS prefixed domains will work. When I added https it worked fine and saved my value, then I was able to get that to work with my javascript, but I was wishing that I didn't have to setup a server with a cert just to test. Security security, I guess.
http://blah.com // didn't work
https://blah.com // did work
Make sure the full, exact URL is registered as a redirect URI. (E.g. https://www.mydomain.com/mypage.html) The error message in the browser should tell you the exact URI that was attempted, so you should be able to match it perfectly.
I am brand new on this and ran into the same issue today attempting to follow the "Dropbox Datastores and Drop-Ins" tutorial on net.tutsplus.com
My setup is on a local system as well with the solution in a sub directory called "todo".
By trial and error, I got through to the authorisation screen by adding this URI in the Dropbox Developer Console: "http://LH.LH/todo/" (without quotes, AND because of comment restrictions on this board, please replace "LH.LH" with "localhost")
Btw I can see in the console, that there are some other issues with the code, but I will be looking into that.
I'm facing the same issue. It works fine locally, but not on production. I find it to be because of the redirection URI: it adds the 'http://' bit, while you can't add this to the list of supported URI in the Dropbox app list.
Try changing the url manually from the browser, removing the http:// and leaving only the domain. Does it work? If so, you have the same problem as I do... which I still don't know how to fix :(
I'm using the grails plugin "mail=0.9". Emails are not sending on production server. It just works fine on development environment on localhost.
Error is given below;
Stacktrace follows:
javax.mail.AuthenticationFailedException
at javax.mail.Service.connect(Service.java:319)
at org.grails.mail.MailService.sendMail(MailService.groovy:63)
at org.grails.mail.MailService.sendMail(MailService.groovy:46)
at org.grails.mail.MailService$sendMail.call(Unknown Source)
at MailGrailsPlugin$_configureSendMail_closure4.doCall(MailGrailsPlugin.groovy:86)
at com.tkxel.chefvivant.api.SommelierController$_closure4.doCall(SommelierController.groovy:107)
at com.tkxel.chefvivant.api.SommelierController$_closure4.doCall(SommelierController.groovy)
at java.lang.Thread.run(Thread.java:636)
Can anyone help me? Why emails are not sending?
Thanks
Finally, after being spending the much time on this issue. I have fixed this error.
Actually the problem was just about to set the Gmail account settings. Google was sending the hidden captcha and that's obvious machine cannot recognize it. So that's why I was getting authentication error.
Solution:
I just unlocked the Gmail captcha and now it works fine.
Steps to reproduce this
1. Logout your gmail account first.
2. Visit this url https://accounts.google.com/DisplayUnlockCaptcha and then put username and password to login
3. Press "Continue" button to unlock the captcha
4. It will automatically save the settings.
Now, Check your application to hit the url like "Forgot Password" request. You will must receive email. :)
You can also read this article.
http://productforums.google.com/forum/#!topic/gmail/uBdBQAuGeTw
Thanks
javax.mail.AuthenticationFailedException means that you are useing incorrect credentials to access to account you use to send emails.
I am trying to connect facebooker and authlogic using this http://github.com/kalasjocke/authlogic_facebook_connect
I was having problems so began to debug the facebooker gem code. I realized that no params are getting set using the facebook login that have anything to do with facebook. I can push the facebook login button, it brings up the facebook window as it should and I accept/sign into facebook. Then in facebooker/rails/controller.secure_with_facebook_params! I print out params, this is what shows:
authenticity_token<pulled out token number>actioncreatecontrollerperson_sessions
person_sessions is the name of my user_sessions. Not sure if this makes a difference though...
This is it. Clearly there should be other parameters here. I checked to make sure that my application numbers are all OK with facebooker.yml (although honestly I don't understand why that would matter as I'm not yet making a facebook app, just want to use connect).
Any ideas?? I would be SOOOO thankful if someone could help me out... any clues would be useful!
K
Argh I think I finally figured it out! Since I don't have an app yet then set_asset_host_to_callback_url in facebooker.yml should be set to false. However, after this is done, you have to close browser as it seems to store previous session. Now to fix my next problem!
I had this same issue, my problem was that I had set a Site Domain on my application settings page on Facebook itself... I wasted lots of time fiddling with my code and my settings in my rails app when it was a facebook setting all along. Big up to Alex Neth on the authlogic google group in the end. So what I had was
Application ID 150132505999999
Application Secret e7fb8001d80e99999999999999999999
Site URL http:// localhost:3000
Site Domain localhost
and what I should have had was
Application ID 150132505999999
Application Secret e7fb8001d80e99999999999999999999
Site URL http:// localhost:3000
Site Domain
duh, probably an obvious one but I hope this helps someone out somewhere.
(I've had to break up the site url there for spam issues on this site)