How do I change which program runs when asking Spyder to showan image?
For instance when I run `image.show(), the image is opened with Windows Photos.
If it makes a difference, I'd prefer to open it in Photoshop. Thanks in advance.
Spyder is relying on Windows' default program to open the image.
See Microsoft's documentation on how to configure default apps by file type. This case of OS configuration.
Related
I am having problems saving the Python code in Anaconda. I write code, Go to File Save as the file is saved but when I open it is empty, no code. I read that IDLE does not save code, it erases it when I close Anaconda.
I have searched in books, youtube tutorials and nothing. I could not find this topic. I can find advanced topics, but this one no.
Thank you for your help!
Best,
Tiberiu
This somewhat depends on what OS you are on. I can speak from my experience. I would highly recommend using PyCharm as an IDE.
But more fundamentally than that, lets talk about saving files. On Mac OS X or Ubuntu 14.04 (or the like), lets say you want to create a python file. One way is to do the following in a terminal:
nano hello.py
This opens up a text editor whose instructions for use are on the bottom of the screen. On Windows you could do:
notepad hello.py
In both cases you then write your code. Lets say the content was:
#content of hello.py
print "Hello World!"
Then you need to save the file and execute it with Python.
Which brings us to the Python issue.
Once you have installed Anaconda, and assuming that there are no other Python installations on your computer. The Anaconda Python should be the active Python on system.
Suffice to say that there are other ways of saving files rather than using IDLE. Personally I have found PyCharm to be a much better IDE for writing Python code.
To address the IDLE issue more directly once you type in the terminal/command prompt idle to launch an IDLE session, likely the IDLE Shell will open up. Perhaps you are trying to save this, in which case you will only save the Shell session.
So go to File - New - Save. This should work without any problem (it does on my system). Good luck! Hope this helps.
Total newbie questions, here. But I installed raring with cli-extra options. Then installed emacs24. I installed texlive. Now with C-c C-c command I can compile .tex documents in emacs. But I don't get a view of it.
My question is, is this because I never installed an X interface? Or is because I am accessing emacs through SecureShell in the ChromeOS?
Thanks so much, please correct any misunderstandings I have. Anyone have suggestions where I can look to find out?
Without a desktop environment there isn't anything that will be able to display images (the pdf).
An example of this is when you have images like pngs in your .emacs.desktop and you open it in no window mode (-nw), emacs gives an error as linux terminals don't support images.
If you want this functionality I'd recommend either loading a desktop manager like xfce, or open the pdf in chrome os, and hopefully it will update automatically when the pdf is re-rendered, otherwise you should just be able to refresh to update it.
Apologies in advance for the dated software question:
According to Code Composer help documentation the "Memory Load/Save Utility" should be be in the Tools menu. In my Code Composer 3.3 (which I have to use for this project, so I cannot upgrade), does not have this option in the tools menu, or any menu that I could find. It is not greyed out - it is just simply missing as far as I can tell. I've changed every view option to try and enable this.
Can anyone help me figure out how to enable/activate this option? Does the processor need to be in a specific state? Is this a special plug-in that I can't find?
Here is my setup:
Code Composer 3.3, Windows Xp, Using a Spectrum Digital xds510pp JTAG emulator on a TI ARM 9 processor.
Specifically the option is here: 13. Memory Load/Save Utility:
http://www.ti.com/lit/an/spraa07c/spraa07c.pdf
[EDIT] The File > Data > Save - this is not the same as the Memory Load/Save Utility. This sounds similar but does not export the values.
For example, I need to export data at a certain memory address for a certain length into a hex format.
Somehow my installation went bad.
I checked the Code Composer Studio Component Manager by running C:\CodeComposer3.3\cc\bin\comp_mgr.exe. Now, in this window un the TI node, there should be numerous plugins and one of which should be: "Memory Save/Load Utility Control..."
For me this was missing.
Repairing the installation via windows control panel did not work. I had to uninstall and then reinstalled. Upon reinstalling a TMS470 driver was reported missing. Not sure why this was.
Again, I uninstalled then complete removed the C:\CodeComposer3.3\ directory, then reinstalled. This time everything seemed to have worked and I do have the Memory Save/Load Utility and it is working.
EDIT:
It should also be noted that the plugins are bundled with the installer and could not be re installed separately.
I have made a simple installer application in Delphi, nothing fancy. Basically I include files into the Exe, and then extract them to a user specified path.
I stumbled across a problem however, and I have noticed this works with ANY Windows Executable, it does not matter if it is an installer or not.
If an Exe is named, or contains the following words in the filename, "Setup", "Build", "Install" and maybe others, then.. whenever the Application is run and closed, Windows pops up a Product Compatibility Assistant dialog, saying the Application may not have installed correctly.
This is a problem, as even though the Files from my installer have actually extracted, and in my eyes the installer has done its job, Windows is complaining about it.
The only idea I have regarding this, is that Windows must check the filename of the Applications when executed, and in this case has identified it as an Installer. Windows must of then set a flag or something on the System, my Installer must then update this flag to say that the installation was a success?
Windows does not complain about this when debugging from the IDE, so it cannot be code related, it must be the OS - this only happens when launching the Application from Windows, not Delphi.
You can try this easily, either create an Application or rename one as Setup.exe, Run it and then close it - wait a few seconds and the Product Compatibility Assistant Dialog will show.
I don't know where to start investigating how to stop this dialog, or where a setting may be to tell Windows the Installer was completed correctly.
Appreciate your thoughts and solutions thanks.
If I recall correctly, this happens when your install app does not include an application manifest. When UAC was introduced, MS introduced a heuristic detection for installers and shows the UAC elevation dialog. The heuristic checks for names like setup.exe, install.exe. The simple solution is to include an application manifest. If it is an installer you probably want to use the requireAdministrator setting.
The feature is known as Installer Detection and is discussed here.
For what it is worth, I would always build an installer with a dedicated install tool like InnoSetup for example.
As David pointed out, MS uses some fuzzy logic to try to guess if the program is an installer. I wouldn't rely on this, as this is only for supporting legacy installer applications.
All new applications should have a manifest file, specifying whether it requires elevated privileges.
If an application has a manifest file that includes the requestedExecutionLevel directive, then Windows does not attempt Installer Detection.
Any program that is detected as an installer program but does not add a registry entry to the Add Remove Programs section of the registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall) will get the message "This program might not have installed correctly".
Is there a way to just run the matlab (7.9.0) editor and not the rest of the "desktop" on linux?
This can't be done directly, because the editor stopped being a stand-alone executable many releases ago. It is now launched as a separate Java window from the Matlab desktop. However, you could try hiding the desktop once the editor is displayed, using the following simple code snippet:
com.mathworks.mde.desk.MLDesktop.getInstance.getMainFrame.hide % to hide desktop
com.mathworks.mde.desk.MLDesktop.getInstance.getMainFrame.show % to show desktop
Note that if your editor is docked to the desktop, it will be hidden together with the desktop, so be careful...
No, this is no longer possible since r2007a.
You can get Matlab syntax highlighting for emacs and vi, though.
On my windows machine, I can start MATLAB with the -nodesktop option, then once in the command prompt, I start only the editor with edit.
Im not sure if this is different in terms of memory space used, but this way you only get the editor and the command prompt (no auto-completion though)
You can add Matlab syntax highlighting to Kate via a plugin. I don't know about gedit, but there's probably an addon for that as well.