I'm fairly new to Swift and the following code isn't asking me for location privileges or showing my current location in MKMapView. I have already added NSLocationAlwaysUsageDescription to my info.plist but my simulator is still not asking for my permission for location or showing my current loc.
import UIKit
import MapKit
import CoreLocation
class MapViewController: UIViewController, CLLocationManagerDelegate {
#IBOutlet var mapView: MKMapView!
var locationManager: CLLocationManager!
override func viewDidLoad() {
super.viewDidLoad()
if (CLLocationManager.locationServicesEnabled())
{
locationManager = CLLocationManager()
locationManager.delegate = self
locationManager.desiredAccuracy = kCLLocationAccuracyBest
locationManager.requestAlwaysAuthorization()
locationManager.startUpdatingLocation()
}
}
func locationManager(_ manager: CLLocationManager, didUpdateLocations locations: [CLLocation]) {
if let location = locations.last
{
let center = CLLocationCoordinate2D(latitude: location.coordinate.latitude, longitude: location.coordinate.longitude)
let region = MKCoordinateRegion(center: center, span: MKCoordinateSpan(latitudeDelta: 0.01, longitudeDelta: 0.01))
self.mapView.setRegion(region, animated: true)
}
}
}
Thanks in advance.
You are requesting authorization when the location services are enabled. The if block would never be executed as the location services are disabled by default. Rather check the authorization status for authorizationStatus == kCLAuthorizationStatusNotDetermined and then request authorization.
New coder, trying to figure out how to use MapKit. The goal is to create a map that users can add pins to using their address. However, the step I am at now, I am having trouble figuring out how to add pins to the map at all.
How can I add a pin to the map? I have been struggling to figure out how to use annotations thus far.
That's what I'm hoping for help/direction with. Thanks!
import UIKit
import MapKit
import CoreLocation
class ViewController: UIViewController, MKMapViewDelegate, CLLocationManagerDelegate
{
#IBOutlet weak var bigMap: MKMapView!
let locationManager = CLLocationManager()
override func viewDidLoad() {
super.viewDidLoad()
self.locationManager.delegate = self
self.locationManager.desiredAccuracy = kCLLocationAccuracyBest
self.locationManager.requestWhenInUseAuthorization()
self.locationManager.startUpdatingLocation()
self.bigMap.showsUserLocation = true
}
override func didReceiveMemoryWarning() {
super.didReceiveMemoryWarning()
}
func locationManager(_ manager: CLLocationManager, didUpdateLocations locations: [CLLocation]) {
let location = locations.last
let center = CLLocationCoordinate2D(latitude: location!.coordinate.latitude, longitude: location!.coordinate.longitude)
let region = MKCoordinateRegion(center: center, span: MKCoordinateSpan(latitudeDelta: 0.02, longitudeDelta: 0.02))
self.bigMap.setRegion(region, animated: true)
self.locationManager.stopUpdatingLocation()
}
func locationManager(_ manager: CLLocationManager, didFailWithError error: Error) {
print("Errors " + error.localizedDescription)
}
}
They're called annotations in the MapKit and you should instantiate them like so:
let annotation = MKPointAnnotation()
then in the viewDidLoad() method just set the coordinates and add them to the map like:
annotation.coordinate = CLLocationCoordinate2D(latitude: 11.12, longitude: 12.11)
mapView.addAnnotation(annotation)
The numbers are your coordinates
The way that I learned how to do this is:
In the same function as viewDidLoad(), place the following lines of code:
let annotation = MKPointAnnotation()
annotation.title = "Your text here"
//You can also add a subtitle that displays under the annotation such as
annotation.subtitle = "One day I'll go here..."
annotation.coordinate = center
This is the only place I can see where you have a coordinate
if all else fails, just add the coordinate (search on Google if you
need to know how to create a coordinate) and set it equal to the
"annotation.coordinate" variable
map.addAnnotation(annotation)
Dassit!
I had working mapview on users location at the start of my project but now it wont zoom in on the user at startup. Any idea how to fix this? the code i use:
In Class
class MapViewController: UIViewController, MKMapViewDelegate, CLLocationManagerDelegate
var Locationmanager = CLLocationManager()
In viewdidload
self.Locationmanager.delegate = self
self.Locationmanager.desiredAccuracy = kCLLocationAccuracyBest
self.Locationmanager.requestWhenInUseAuthorization()
self.Locationmanager.startUpdatingLocation()
self.Mapview.showsUserLocation = true
Mapview.setCenterCoordinate(Mapview.userLocation.coordinate, animated: true)
In function
func locationManager(manager: CLLocationManager, didUpdateLocations locations:[MKUserLocation]) {
let latitude = Locationmanager.location?.coordinate.latitude
let longitude = Locationmanager.location?.coordinate.longitude
let center = CLLocationCoordinate2D (latitude: latitude!, longitude: longitude!)
let region = MKCoordinateRegion (center: center, span: MKCoordinateSpan (latitudeDelta: 0.02, longitudeDelta: 0.02))
self.Mapview.setRegion(region, animated: true)
self.Locationmanager.stopUpdatingLocation()
And in info.plist
NSLocationWhenInUseUsageDescription
If your goal is to make a map view display the user's location, there is no need, and no point, to tell the location manager to do anything. Get rid of all that code - it is actually doing you harm here. Just set the map view's userTrackingMode to .follow and stand back.
I would like to know how to check if person is near some coordinates and then do something like say hello into console for testing. Right now I have already got user location and it is going to update every time person moves but how to know if he is near some coordinates or address? For example:
func sayHello(){
if mapView.userLocation.coordinate.latitude == 26{
print("Hello")
}
Code I've done already:
import UIKit
import MapKit
import CoreLocation
class ViewController: UIViewController, MKMapViewDelegate, CLLocationManagerDelegate {
#IBOutlet weak var mapView: MKMapView!
let locationManager = CLLocationManager()
override func viewDidLoad() {
super.viewDidLoad()
self.locationManager.delegate = self
self.locationManager.desiredAccuracy = kCLLocationAccuracyBest
self.locationManager.requestAlwaysAuthorization()
self.locationManager.startUpdatingLocation()
self.mapView.showsUserLocation = true
}
override func didReceiveMemoryWarning() {
super.didReceiveMemoryWarning()
// Dispose of any resources that can be recreated.
}
func locationManager(manager: CLLocationManager, didUpdateLocations locations: [CLLocation])
{
let location = locations.last
let center = CLLocationCoordinate2D(latitude: location!.coordinate.latitude, longitude: location!.coordinate.longitude)
let region = MKCoordinateRegion(center: center, span: MKCoordinateSpan(latitudeDelta: 0.01, longitudeDelta: 0.01))
self.mapView.setRegion(region, animated: true)
self.locationManager.stopUpdatingLocation()
}
func locationManager(manager: CLLocationManager, didFailWithError error: NSError)
{
print("Errors: " + error.localizedDescription)
}
}
What I would do is every time you update the user's location, check the distance between your user's location and the address location(s) you have stored. If the user is within x meters, print "Hello".
Below is code I would use to get the distance between your user and the address. If you have an array of objects that contain your addresses and their coordinates you could loop through each address and print Hello for each address that is within x meters.
let userLocation:CLLocation = CLLocation(latitude: 10.000, longitude: 29.000)
let addressLocation:CLLocation = CLLocation(latitude: 15.000, longitude: 20.000)
let meters:CLLocationDistance = userLocation.distanceFromLocation(addressLocation)
Get the distance between two coordinates and match if its less than 5m than show print statement
CLLocation *locA = [[CLLocation alloc] initWithLatitude:lat1 longitude:long1];
CLLocation *locB = [[CLLocation alloc] initWithLatitude:lat2 longitude:long2];
CLLocationDistance distance = [locA distanceFromLocation:locB];
I am learning how to use the new Swift language (only Swift, no Objective-C). To do it, I want to do a simple view with a map (MKMapView). I want to find and update the location of the user (like in the Apple Map app).
I tried this, but nothing happened:
import MapKit
import CoreLocation
class MapView : UIViewController, CLLocationManagerDelegate {
#IBOutlet weak var map: MKMapView!
var locationManager: CLLocationManager!
override func viewDidLoad() {
super.viewDidLoad()
if (CLLocationManager.locationServicesEnabled())
{
locationManager = CLLocationManager()
locationManager.delegate = self
locationManager.desiredAccuracy = kCLLocationAccuracyBest
locationManager.requestAlwaysAuthorization()
locationManager.startUpdatingLocation()
}
}
}
Could you please help me?
You have to override CLLocationManager.didUpdateLocations (part of CLLocationManagerDelegate) to get notified when the location manager retrieves the current location:
func locationManager(_ manager: CLLocationManager, didUpdateLocations locations: [CLLocation]) {
if let location = locations.last{
let center = CLLocationCoordinate2D(latitude: location.coordinate.latitude, longitude: location.coordinate.longitude)
let region = MKCoordinateRegion(center: center, span: MKCoordinateSpan(latitudeDelta: 0.01, longitudeDelta: 0.01))
self.map.setRegion(region, animated: true)
}
}
NOTE: If your target is iOS 8 or above, you must include the NSLocationAlwaysUsageDescription or NSLocationWhenInUseUsageDescription key in your Info.plist to get the location services to work.
100% working, easy steps and tested
Import libraries:
import MapKit
import CoreLocation
set delegates:
CLLocationManagerDelegate,MKMapViewDelegate
Take variable:
let locationManager = CLLocationManager()
write this code on viewDidLoad():
self.locationManager.requestAlwaysAuthorization()
// For use in foreground
self.locationManager.requestWhenInUseAuthorization()
if CLLocationManager.locationServicesEnabled() {
locationManager.delegate = self
locationManager.desiredAccuracy = kCLLocationAccuracyBest
locationManager.startUpdatingLocation()
}
mapView.delegate = self
mapView.mapType = .standard
mapView.isZoomEnabled = true
mapView.isScrollEnabled = true
if let coor = mapView.userLocation.location?.coordinate{
mapView.setCenter(coor, animated: true)
}
Write delegate method for location:
func locationManager(_ manager: CLLocationManager, didUpdateLocations locations: [CLLocation]) {
let locValue:CLLocationCoordinate2D = manager.location!.coordinate
mapView.mapType = MKMapType.standard
let span = MKCoordinateSpanMake(0.05, 0.05)
let region = MKCoordinateRegion(center: locValue, span: span)
mapView.setRegion(region, animated: true)
let annotation = MKPointAnnotation()
annotation.coordinate = locValue
annotation.title = "Javed Multani"
annotation.subtitle = "current location"
mapView.addAnnotation(annotation)
//centerMap(locValue)
}
Do not forgot to set permission in info.plist
<key>NSLocationWhenInUseUsageDescription</key>
<string>This application requires location services to work</string>
<key>NSLocationAlwaysUsageDescription</key>
<string>This application requires location services to work</string>
It's look like:
For swift 3 and XCode 8 I find this answer:
First, you need set privacy into info.plist. Insert string NSLocationWhenInUseUsageDescription with your description why you want get user location. For example, set string "For map in application".
Second, use this code example
#IBOutlet weak var mapView: MKMapView!
private var locationManager: CLLocationManager!
private var currentLocation: CLLocation?
override func viewDidLoad() {
super.viewDidLoad()
mapView.delegate = self
locationManager = CLLocationManager()
locationManager.delegate = self
locationManager.desiredAccuracy = kCLLocationAccuracyBest
// Check for Location Services
if CLLocationManager.locationServicesEnabled() {
locationManager.requestWhenInUseAuthorization()
locationManager.startUpdatingLocation()
}
}
// MARK - CLLocationManagerDelegate
func locationManager(_ manager: CLLocationManager, didUpdateLocations locations: [CLLocation]) {
defer { currentLocation = locations.last }
if currentLocation == nil {
// Zoom to user location
if let userLocation = locations.last {
let viewRegion = MKCoordinateRegionMakeWithDistance(userLocation.coordinate, 2000, 2000)
mapView.setRegion(viewRegion, animated: false)
}
}
}
Third, set User Location flag in storyboard for mapView.
MyLocation
is a Swift iOS Demo.
You can use this demo for the following:
Show the current location.
Choose other location: in this case stop tracking the location.
Add a push pin to a MKMapView(iOS) when touching.
Hi Sometimes setting the showsUserLocation in code doesn't work for some weird reason.
So try a combination of the following.
In viewDidLoad()
self.mapView.showsUserLocation = true
Go to your storyboard in Xcode, on the right panel's attribute inspector tick the User location check box, like in the attached image. run your app and you should be able to see the User location
Swift 5.1
Get Current Location and Set on MKMapView
Import libraries:
import MapKit
import CoreLocation
set delegates:
CLLocationManagerDelegate , MKMapViewDelegate
Declare variable:
let locationManager = CLLocationManager()
Write this code on viewDidLoad():
self.locationManager.requestAlwaysAuthorization()
self.locationManager.requestWhenInUseAuthorization()
if CLLocationManager.locationServicesEnabled() {
locationManager.delegate = self
locationManager.desiredAccuracy = kCLLocationAccuracyBest
locationManager.startUpdatingLocation()
}
mapView.delegate = self
mapView.mapType = .standard
mapView.isZoomEnabled = true
mapView.isScrollEnabled = true
if let coor = mapView.userLocation.location?.coordinate{
mapView.setCenter(coor, animated: true)
}
Write delegate method for location:
func locationManager(_ manager: CLLocationManager, didUpdateLocations
locations: [CLLocation]) {
let locValue:CLLocationCoordinate2D = manager.location!.coordinate
mapView.mapType = MKMapType.standard
let span = MKCoordinateSpan(latitudeDelta: 0.05, longitudeDelta: 0.05)
let region = MKCoordinateRegion(center: locValue, span: span)
mapView.setRegion(region, animated: true)
let annotation = MKPointAnnotation()
annotation.coordinate = locValue
annotation.title = "You are Here"
mapView.addAnnotation(annotation)
}
Set permission in info.plist *
<key>NSLocationWhenInUseUsageDescription</key>
<string>This application requires location services to work</string>
<key>NSLocationAlwaysUsageDescription</key>
<string>This application requires location services to work</string>
For Swift 2, you should change it to the following:
func locationManager(manager: CLLocationManager, didUpdateLocations locations: [CLLocation]) {
let location = locations.last
let center = CLLocationCoordinate2D(latitude: location!.coordinate.latitude, longitude: location!.coordinate.longitude)
let region = MKCoordinateRegion(center: center, span: MKCoordinateSpan(latitudeDelta: 0.01, longitudeDelta: 0.01))
self.map.setRegion(region, animated: true)
}
You just need to set the userTrackingMode of the MKMapView. If you only want to display and track the user location and implement the same behaviour as the Apple Maps app uses, there is no reason for writing additional code.
mapView.userTrackingMode = .follow
See more at https://developer.apple.com/documentation/mapkit/mkmapview/1616208-usertrackingmode .
you have to override CLLocationManager.didUpdateLocations
func locationManager(manager: CLLocationManager, didUpdateLocations locations: [CLLocation]) {
let userLocation:CLLocation = locations[0] as CLLocation
locationManager.stopUpdatingLocation()
let location = CLLocationCoordinate2D(latitude: userLocation.coordinate.latitude, longitude: userLocation.coordinate.longitude)
let span = MKCoordinateSpanMake(0.5, 0.5)
let region = MKCoordinateRegion (center: location,span: span)
mapView.setRegion(region, animated: true)
}
you also have to add NSLocationWhenInUseUsageDescription and NSLocationAlwaysUsageDescription to your plist setting Result as value
In Swift 4, I had used the locationManager delegate function as defined above ..
func locationManager(manager: CLLocationManager!,
didUpdateLocations locations: [AnyObject]!) {
.. but this needed to be changed to ..
func locationManager(_ manager: CLLocationManager,
didUpdateLocations locations: [CLLocation]) {
This came from .. https://github.com/lotfyahmed/MyLocation/blob/master/MyLocation/ViewController.swift - thanks!
mapView.showsUserLocation = true
Create UIButton and add this action
#IBAction func showCurrentLocation(_ sender: Any) {
let coordinate = mapView.userLocation.coordinate
let center = CLLocationCoordinate2D(latitude: coordinate.latitude, longitude: coordinate.longitude)
let region = MKCoordinateRegion(center: center, span: MKCoordinateSpan(latitudeDelta: 0.01, longitudeDelta: 0.01))
self.mapView.setRegion(region, animated: true)
}