I've added a folder with asp.net core project which isn't supported by Visual Studio 2015 (which is used for everything else) and thus not included to the general solution.
To have those files in source control I had to manually add them using "add items to folder" command in source explorer. So they are checked-in but tfs not tracking changes for them anymore although there are differences that are shown if compare to the latest folder on the server:
How do I make TFS track them and show pending changes for edited files?
According to your description, looks like these files are all out side of Visual Studio.
Not sure if you are using server workspace or local workspace.
When adding or editing the workspace you click Advanced >> . There is a setting of Location: Local/Server.
For local workspace, when your script or anything else changes files outside Visual Studio, your workspace detects the changes automatically.
It also detects adds or deletes but you have to include them to your Pending Changes manually with the link under Excluded Changes.
For server workspace, you could choose to use Reconcile command. See https://stackoverflow.com/a/22860674/932282 for a complete answer.
Besides, you could also take a look at other solutions in below similar question:
How to have TFS 2010 detect changes done to files outside of Visual Studio?
Force TFS to detect changes
I think you just added them to source explorer and not to the solution, as you said. In this case, there is no editor application (even your VS) that is responsible for doing the check-out operation because they are not aware of TFS. On the other side, TFS can detect that changes have happened to the files but can not track them.
If you do not activate the "Get the latest version before check-out" option in your team project, then you can go to the source control and check-out those files manually and then check-in them manually again when your work with them is done.
Please before doing this, take a backup of your source code for caution.
I have a solution on TFS "Project One".
"Project One" was copied via external to another device of mine and i needed to map the solution on the new device to source control. Once i mapped the project, it replaced all the source that was local with whatever was last on TFS for the project. Any way i can get my local source back or is it gone forever?
I had not done any backups on the local code as i didn't think it would delete my current source. In fact i thought it would as me to do a merge.
I had a look at this link after my code had been replaced
Unfortunately you've lost the changes as TFS has overwritten the local files. You set up the workspace after making the changes so TFS didn't know anything about them in order to merge.
If you created any additional files that weren't under source control then they should still exist locally, so maybe you haven't lost everything
In future, if you setup the workspace first then you can obviously make changes to the files and TFS will know about it.
Alternatively, map the workspace to a different local folder and then copy in your changes. If you are using a local workspace then TFS will generate the pending changes for you.
Over the last several months myself and those on my development team have run across a new issue. When TFS creates a folder or does a 'Get latest' and overwrites any of the files in the folder structure, it changes the folder permissions to 'Read-only'. This causes an issue, an inconvenience really, where when we go to build the project it will tell us that our access to those folders is denied. If we open the folder and un-check 'Read-only' we are then able to proceed with the build and/or publish of the solution.
We have checked with our networking department, this is not a network setting and is not occurring anywhere outside of TFS. This is only occuring when TFS creates the folder.
Is anyone else having this issue? I've been pouring over settings off and on, trying to determine if I can change this setting. I do not want the folder to be read-only when it is generated or updated.
This is by design but your inconvenience is not. In TFS 2012 (with VS2012) Microsoft introduced local workspaces that do not put anything as readonly.
You can go to the settings of your workspace and change it from server to local any time.
You are also making a common mistake in that you have files that change during a build under source control. If you remove those files you will be able to build even with server workspace.
It is bag practice to put files that you generate under source control.
Had to change my computername and domain. Now I can't access team foundation. I tried this statement to fix it.
tf workspaces /updateComputerName:MyOldComputerName /s:"http://MyServer/MyCollection"
It didn't work. I get the following error "Key not valid for use in specified state."
Not sure what to do now.
It sounds like you may have a problem that will prevent remapping the workspace. However, it's possible that the command isn't quite correctly formed, so try checking the collection URL (I'd expect it to include MyServer:8080), and in versions of TFS 2010 onwards the documentation refers to /collection: rather than /s:
If that fails, then one approach to rescue things is to create a new workspace and delete the old one. You can transfer any edited files you had checked out to the new workspace as follows:
Rename your old source code folder, so you keep a backup
Create a new workspace that maps the (old) source code folder location, and Get the latest version of the code.
If you think you deleted or added files, use a folder-diff utility to find them, and manually re-do those changes.
Now check out everything (right click on the root folder and check it out)
Copy your backed up source code over your workspace folder
Undo checkout on everything. Visual Studio will ask if you want to discard your changes. Carefully choose the "No to all" option. This means it will only discard locks on unchanged files.
You will now have all changed files listed in your pending changes.
Once you're absolutely sure this has all worked, you can delete your backup of the source.
(You can achieve a similar thing by unplugging your network cable to force Visual Studio to go offline, moving your old source code back in place of your new workspace folder, then plug the net cable back in and using File > Source Control > Go Online. This should diff your code to the server and work out what changed. I don't trust this as much as the above approach though)
Once you have the code in your new workspace, you can use the tf command to delete the old workspace to clean everything up.
Just started up Visual Studio 2012 and opened my solution which is in source control with Team Foundation Server 2012 Express and encountered this, any ideas? Can't get latest, can't check in, everything appears checked out :( Basically my workspace is unusable right now.
TF400018: The local version table for the local workspace MY-PC;My
User could not be opened. The workspace version table contains an
unknown schema version.
There is only one post I could find on the net, and the answers are pretty vague.
I had the same issue, and I just fixed it on mine.
If you don't mind re-map all your projects, you can try follow:
Click the box in "Workspace".
Click on "Workspaces".
Delete the workspace profile you're currently using
Re-connect to TFS open "Source Control"
Be aware that you may lose all your TFS mappings, you may need to re-map all your projects from TFS. Backup your changes that not checked in yet.
cycle6 is correct, but it isn't clear that you will not lose your pending check-in list if you follow some additional steps.
Click the box labelled "Workspace".
Click on "Workspaces".
Delete the corrupt workspace profile, accepting the warning.
Re-connect to TFS and open "Source Control Explorer"
Create a new workspace
One by one, map your projects to the same folder as before
You will be presented with a list of conflicts, where you have matching writable files in the folder already.
Choose "Keep local copy" for each file you had checked out before, and "Take Server Version" for any files changed by other members of the team that you didn't have the latest version for. This might take a while depending on the length of the list, but it is worth comparing versions for any file you are unsure of.
You will be left with your solution and all pending items marked as checked out, with your work preserved.
I did the following steps and it solved the issue:
deleted the hidden folder named $tfs and then
in the Visual Studio, Solution Explorer: Right click on the solution node > the Source Control > Get Specific version > latest version
If you already have multiple instances of Visual Studio open.
Close all of them . [in some cases you need to log out from windows & log back in OR restart ]
Rename the $tf folder with any other name (eg. $tft)
Start Visual Studio, to see your issue fixed. :)
Hope this helps.
Sometimes this happens when you are running out of disk space.
Try to see if you have very low space, eg. < 10 MB.
If that so, try to clean up your windows Temp folder. See if that solve this issue
It's a misleading message to an extent.
What has happened is that the internal data structures of the workspace have become corrupt.
The ends up as the code (in the tf command, Visual Studio, et al.) to load those data structures failing to load from the relevant files, which becomes an error about a schema version problem.
In the case that I experienced, this was because the machine hosting the workspace ran out of disc space while doing operations upon the workspace of various kinds (check-outs, check-ins, adding pending changes — it was actually a bunch of workspaces being used by TFS 2017 build agents and multiple active builds).
This corrupted parts of the data that are held in the files under the hidden $tf subdirectory (it always being a local workspace on a TFS 2017 build agent), because source control wasn't able to rewrite/extend these files.
Other answers here discuss partly retaining some of the files, based upon more specific knowledge of what has not been corrupted (such as preserving the internal files storing pending changes if one wasn't creating any pending changes), but the basic idea is that one needs to reset all of the stuff in $tf to a sane state of some kind.
In my case, I had the disadvantage of multiple potential causes and no consistent knowledge of which parts of $tf were corrupted, but I conversely had some advantages:
It being a TFS build, arranged to build from the build agent's s (source) directory into its a (artifact staging) and b (binaries) directories, there were not masses of non-source-controlled object and other files in the workspace (which is the s directory) that would have ended up as pending additions.
There were not any pending changes (to actual source files) worthwhile to preserve. I could afford to lose all information about source files, and indeed all current locally-stored information about the workspace, and simply run the build again with a fresh sane and largely unpopulated workspace. I did not even need to restore source files and directories for the whole workspace, as the first task in any TFS ("vNext") build is a "Get Sources" task that uses (variously) tf vc scorch, tf vc undo, and tf vc get to check out the right source version.
So simply, in Developer PowerShell (Visual Studio being installed on the build machine):
Remove-Item -Recurse -Force 'X:\Agents\07\_work\1138\s'
tf vc get 'X:\Agents\07\_work\1138\s'
(Note that one can always get at the tf command in some way on a TFS build machine. Every build agent has a local helper copy of tf.exe and its ancillary DLLs in its VSTS "OM" subdirectory.)
I possibly could have omitted the tf vc get step, but having had trouble with "Get Sources" in the past I do not trust it to robustly cope with arbitrary manual external alterations, such as no s directory when the build isn't configured to outright delete that entire directory itself (as it can be but was not here).
For the same reason, Microsoft's own "agent maintenance" (another way to clean things up) is quite dodgy, and ends up leaking workspaces on the TFS server (which I have raised a bug with Microsoft about).
There is simple workaround. Remove local mapping to folder where is the sources (Advanced -> Remove Mapping, or just rename or delete mapped folder. After that you will be able to connect to tfs. Download the project again.
If you already have multiple tfs instances of Visual Studio open.
1.) Open File -> Source Control -> Manage Workspaces
2.) Delete all tfs map
3.) Then select folder maps
For the same issue in eclipse: Find the folder $tf and delete it.
You will find the $tf folder in the workspace directory. If not then search for the $tf folder.
Once you have found it, delete it.
In my case, none of the other answers helped - the problem was occurring on a machine that didn't have Visual Studio and no matter how I tried to get rid of the bad workspace data it never worked. After working with procmon a bit, I discovered another critical folder that might be the source of this error: C:\Users\All Users\Microsoft Team Foundation Local Workspaces\ (it might also be under C:\ProgramData (on my system, 'All Users' is a symlink to that folder, but not sure if this is typical.) In this folder there are sub-folders named like guids that contain some other folders, one per workspace it appears. In my case, some of the data in these folders was old and some was corrupt. Once I deleted the bad workspace folders, all my problems disappeared. You might also want to delete the Cache folder as identified in the comments of this post, but that didn't help me (didn't seem to hurt though, either.)
Alternatively, you could just backup your current workspace to a different location, re-create your workspace, and copy the files back that you had made changed to. VS should detect the newest files and automatically check out these files allowing you to check in the newer versions that you copied back from your backup.
What worked for me is, delete the local folder(s), restart your machine, then map the projects again. Any pending changes you have just save them somewhere else temporarily.