I am new to SSIS, I am importing a flat file data into SQL Server. It throws error while importing data in the flat file source task.
[Flat File Source [60]] Error: Data conversion failed. The data conversion for column "DCN_NAME" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Flat File Source [60]] Error: The "Flat File Source.Outputs[Flat File Source Output].Columns[DCN_NAME]" failed because truncation occurred, and the truncation row disposition on "Flat File Source.Outputs[Flat File Source Output].Columns[DCN_NAME]" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Flat File Source returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
How to solve this issue. I don't have problem in destination.Is it possible to change the source field length?
I changed the source length in source connection manager. It works fine now.
You have not provided enough information to answer your question. Here is what I can gleam from what you have provided.
Your SSIS package is read a flat file and it assumes DCN_Name is data DT_STR
(type char). Confirm the origin and the destination have the same data type. If they do not, use a [Data Conversion] function which is found on the left side on the screen under Data Flow.
Be mindful that while SQL uses varchar and nvarchar, SSIS uses DT_WSTR and DT_STR. It can get confusing. In the link below you will find a SSIS to SQL Data Type Conversion
enter link description here
The errors generated by SSIS are counter intuitive.
The solution was use a data conversion because the source and destination were different data types.
Related
I tried to import my data from Neo4j into Gephi but it doesn't work.
I have the following result in Neo4j :
Failed to invoke procedure apoc.gephi.add: Caused by: com.fasterxml.jackson.core.JsonParseException: Invalid UTF-8 start byte 0xfb at [Source: (apoc.export.util.CountingInputStream); line: 1, column: 136]
As previously mentioned, it looks like neo4j is not exporting using UTF-8, so that, I would check how neo4j is generating the output.
Another possibility is that, when neo4j writing the output, something went slightly wrong.
I got this very same problem in the past when concurrently managing content in a file.
A thread crashed and closed "not correctly enough" the file. I mean, when reviewing the file, everything looks pretty normal, but some characters have been introduced which are not UTF-8. A tool like Atom can help you.
Best
Our Nightly TFS 2012 backup has just started to fail. It also fails when run directly through TFS Express Administration Console.
Which file is the following error actually referring to? If I can find it then I should be able to fix the "Root element is missing" error :)
[13/08/2014 23:00:00] [Info] Full database backup job
[13/08/2014 23:00:00] [Info] Getting backup lock
[13/08/2014 23:00:05] [Error]
Exception Message: There is an error in XML document (0, 0). (type InvalidOperationException)
Exception Stack Trace: at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at Microsoft.TeamFoundation.Admin.BackupSets.Load(String folder)
at Microsoft.TeamFoundation.Admin.Jobs.FullDatabaseBackupJobExtension.Run(TeamFoundationRequestContext requestContext, TeamFoundationJobDefinition jobDefinition, DateTime jobQueueTime, String& resultMessage)
Inner Exception Details:
Exception Message: Root element is missing. (type XmlException)
Exception Stack Trace: at System.Xml.XmlTextReaderImpl.ThrowWithoutLineInfo(String res)
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Xml.XmlReader.MoveToContent()
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderBackupSets.Read7_BackupSets()
[13/08/2014 23:00:05] [Info] Full Backups Failed
Thanks.
Dylan answered my original question as to where to find the unspecified xml file that was in error, but in case it helps anyone else...
The Backupsets.xml file was empty. Why this is I do not know...
Attempting to configure backups through TFS Express Administration Console also failed with the same error, so I
Deleted the Backupsets.xml file altogether
Reconfigured Backups using the wizard - Now that it didn't find the xml file at all it created a new one.
Ran a full backup - which was sucessful. Hopefully the scheduled backups will now also work from now on.
NB The newly created Backupsets.xml file (Before the first full backup) :
<?xml version="1.0"?>
<BackupSets xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Version>1</Version>
<BackupSets />
</BackupSets>
Look in the folder where your backups are configured to be placed. there will be an XML file there, can't remember the name, but maybe something like BackupSets.xml
FIX (user workaround):
Rename the file BackupSets.xml in the backup destination folder
Re-run Full Backup*
In TFS Admin Console select Scheduled Backups, then click Take Full Backup Now. Or use command line, PowerShell script, API call as desired.
CAUSE: backupsets.xml in backup destination does not contain valid XML.
Why does this cause failure? Backup wizard opens backupsettings.xml then calls XML deserializer function System.Xml.Serialization.XmlSerializer.Deserialize preparing to add new entry. Invalid XML content including empty/zero byte or text-only content will cause deserialize exception.
PRODUCTS IMPACTED: Repro confirmed in TFS2010 and on 2017-11-25 I had repro with TFS2015 SP3 :-O
Fix is fairly straightforward... once you understand what is going on. -Zephan
MICROSOFT CODE BUGFIX/feature improvement request:
BACKUP Wizard exception handling for backupsets.xml deserialize or parsing exceptions.
If XML deserialization error then close backupsets.xml, rename it to backupsets-YYMMDD-hhmm-corrupt-backup.xml, then jump to backupsets.xml file not found functionality.
SEVERITY: HIGH (data loss)
This is a long-standing problem that can lead to major data loss. I've personally seen over 1 month of data loss due to this issue silently blocking backups and making all earlier restore sets unusable (since parsing BackupSets.xml is VERY finicky I couldn't even hack to restore last successful backup.)
I've been trying to upsert and delete some data at objects in salesforce cloud using Data Loader 25.0.2. Data Loader executes without problems, but the insertions/deletions don't get done. The log file returns some lines with this errors:
2012-10-03 17:13:16,958 ERROR [deleteAccount]
client.PartnerClient processResult (PartnerClient.java:432) - Errors
were found on item0 2012-10-03 17:13:16,958 ERROR
[deleteAccount] client.PartnerClient processResult
(PartnerClient.java:434) - Error code is:INVALID_ID_FIELD 2012-10-03
17:13:16,958 ERROR [deleteAccount] client.PartnerClient
processResult (PartnerClient.java:435) - Error message:invalid record
id
I've checked that the object ids match, so there are not obvious differences between the data at the cloud and the csv being used to the deletion command.
What could be happening?
I finally found that the codification of the .csv file I've uploaded differed from the codification used for internal representation in salesforce for the data of that object. For example: My .csv file was codified on ANSI instead of UTF-8. This detail got salesforce into confussion. So I had only to change the file's codification to UTF-8 and everything got solved.
After calling to a com component procedure , an error raised
OLE error C0000094.
What does it mean, as searching yields this from this related question.
which contain :
0x80000001 -2147483647 Not implemented
0x80000002 -2147483646 Ran out of memory
0x80000003 -2147483645 One or more arguments are invalid
0x80000004 -2147483644 No such interface supported
0x80000005 -2147483643 Invalid pointer
0x80000006 -2147483642 Invalid handle
0x80000007 -2147483641 Operation aborted
0x80000008 -2147483640 Unspecified error
0x80000009 -2147483639 General access denied error
0x8000000A -2147483638 The data necessary to complete this operation
is not yet available.
0x80004001 -2147467263 Not implemented
0x80004002 -2147467262 No such interface supported
0x80004003 -2147467261 Invalid pointer
0x80004004 -2147467260 Operation aborted
0x80004005 -2147467259 Unspecified error
0x80004006 -2147467258 Thread local storage failure
0x80004007 -2147467257 Get shared memory allocator failure
0x80004008 -2147467256 Get memory allocator failure
0x80004009 -2147467255 Unable to initialize class cache
0x8000400A -2147467254 Unable to initialize RPC services
0x8000400B -2147467253 Cannot set thread local storage channel control
0x8000400C -2147467252 Could not allocate thread local storage channel
control
0x8000400D -2147467251 The user supplied memory allocator is
unacceptable
0x8000400E -2147467250 The OLE service mutex already exists
0x8000400F -2147467249 The OLE service file mapping already exists
0x80004010 -2147467248 Unable to map view of file for OLE service
0x80004011 -2147467247 Failure attempting to launch OLE service
0x80004012 -2147467246 There was an attempt to call CoInitialize a
second time while single threaded
0x80004013 -2147467245 A Remote activation was necessary but was not
allowed
0x80004014 -2147467244 A Remote activation was necessary but the
server name provided was invalid
0x80004015 -2147467243 The class is configured to run as a security
id different from the caller
0x80004016 -2147467242 Use of Ole1 services requiring DDE windows is
disabled
0x80004017 -2147467241 A RunAs specification must be
<domain name>\<user name> or simply <user name>
0x80004018 -2147467240 The server process could not be started. The
pathname may be incorrect.
0x80004019 -2147467239 The server process could not be started as the
configured identity. The pathname may be
incorrect or unavailable.
0x8000401A -2147467238 The server process could not be started because
the configured identity is incorrect. Check
the username and password.
0x8000401B -2147467237 The client is not allowed to launch this
server.
0x8000401C -2147467236 The service providing this server could not
be started.
0x8000401D -2147467235 This computer was unable to communicate with
the computer providing the server.
0x8000401E -2147467234 The server did not respond after being
launched.
0x8000401F -2147467233 The registration information for this server
is inconsistent or incomplete.
0x80004020 -2147467232 The registration information for this interface
is inconsistent or incomplete.
0x80004021 -2147467231 The operation attempted is not supported.
0x8000FFFF -2147418113 Catastrophic failure
0x80070005 -2147024891 General access denied error
0x80070006 -2147024890 Invalid handle
0x8007000E -2147024882 Ran out of memory
0x80070057 -2147024809 One or more arguments are invalid
Debugging HRESULTS from OLE-DB
Some OLE-DB error messages, such as 80040e37 (Table 'x' does not exist) are
fairly obvious whether using ADO or OLE-DB. Others such as 0x80040E06 (Invalid chapter) are not as clear to an ADO developer. You can use the ITest/ISpy tools that ship with the OLE-DB SDK to spy on the OLE-DB calls. ITest/ISpy are similar to ODBC Spy and you can use them for complex debugging in ADO/DB applications.
This list was compiled from the Oledberr.h file, which ships with the OLE-DB SDK:
Unsigned Signed
HRESULT Hex HRESULT Description
---------- ----------- ----------------------------------------------
0x80040E00 -2147217920 Invalid accessor
0x80040E01 -2147217919 Creating another row would have exceeded the
total number of active rows supported by the
rowset
0x80040E02 -2147217918 Unable to write with a read-only accessor
0x80040E03 -2147217917 Given values violate the database schema
0x80040E04 -2147217916 Invalid row handle
0x80040E05 -2147217915 An object was open
0x80040E06 -2147217914 Invalid chapter
0x80040E07 -2147217913 A literal value in the command could not be converted to the correct type due to a reason
other than data overflow
0x80040E08 -2147217912 Invalid binding info
0x80040E09 -2147217911 Permission denied
0x80040E0A -2147217910 Specified column does not contain bookmarks or
chapters
0x80040E0B -2147217909 Some cost limits were rejected
0x80040E0C -2147217908 No command has been set for the command object
0x80040E0D -2147217907 Unable to find a query plan within the given
cost limit
0x80040E0E -2147217906 Invalid bookmark
0x80040E0F -2147217905 Invalid lock mode
0x80040E10 -2147217904 No value given for one or more required
parameters
0x80040E11 -2147217903 Invalid column ID
0x80040E12 -2147217902 Invalid ratio
0x80040E13 -2147217901 Invalid value
0x80040E14 -2147217900 The command contained one or more errors
0x80040E15 -2147217899 The executing command cannot be canceled
0x80040E16 -2147217898 The provider does not support the specified
dialect
0x80040E17 -2147217897 A data source with the specified name already
exists
0x80040E18 -2147217896 The rowset was builtover a live data feed and
cannot be restarted
0x80040E19 -2147217895 No key matching the described characteristics
could be found within the current range
0x80040E1A -2147217894 Ownership of this tree has been given to the
provider
0x80040E1B -2147217893 The provider is unable to determine identity
for newly inserted rows
0x80040E1C -2147217892 No nonzero weights specified for any goals
supported, so goal was rejected; current goal
was not changed
0x80040E1D -2147217891 Requested conversion is not supported
0x80040E1E -2147217890 lRowsOffset would position you past either end
of the rowset, regardless of the cRows value
specified; cRowsObtained is 0
0x80040E1F -2147217889 Information was requested for a query, and the
query was not set
0x80040E20 -2147217888 Provider called a method from IRowsetNotify in
the consumer and NT
0x80040E21 -2147217887 Errors occurred
0x80040E22 -2147217886 A non-NULL controlling IUnknown was specified
and the object being created does not support
aggregation
0x80040E23 -2147217885 A given HROW referred to a hard- or soft-
deleted row
0x80040E24 -2147217884 The rowset does not support fetching backwards
0x80040E25 -2147217883 All HROWs must be released before new ones can
be obtained
0x80040E26 -2147217882 One of the specified storage flags was not
supported
0x80040E27 -2147217881 The comparison operator was invalid
0x80040E28 -2147217880 The specified status flag was neither
DBCOLUMNSTATUS_OK nor DBCOLUMNSTATUS_ISNULL
0x80040E29 -2147217879 The rowset cannot scroll backwards
0x80040E2A -2147217878 Invalid region handle
0x80040E2B -2147217877 The specified set of rows was not contiguous to
or overlapping the rows in the specified watch
region
0x80040E2C -2147217876 A transition from ALL* to MOVE* or EXTEND* was
specified
0x80040E2D -2147217875 The specified region is not a proper subregion
of the region identified by the given watch
region handle
0x80040E2E -2147217874 The provider does not support multi-statement
commands
0x80040E2F -2147217873 A specified value violated the integrity
constraints for a column or table
0x80040E30 -2147217872 The given type name was unrecognized
0x80040E31 -2147217871 Execution aborted because a resource limit has
been reached; no results have been returned
0x80040E32 -2147217870 Cannot clone a command object whose command
tree contains a rowset or rowsets
0x80040E33 -2147217869 Cannot represent the current tree as text
0x80040E34 -2147217868 The specified index already exists
0x80040E35 -2147217867 The specified index does not exist
0x80040E36 -2147217866 The specified index was in use
0x80040E37 -2147217865 The specified table does not exist
0x80040E38 -2147217864 The rowset was using optimistic concurrency and
the value of a column has been changed since
it was last read
0x80040E39 -2147217863 Errors were detected during the copy
0x80040E3A -2147217862 A specified precision was invalid
0x80040E3B -2147217861 A specified scale was invalid
0x80040E3C -2147217860 Invalid table ID
0x80040E3D -2147217859 A specified type was invalid
0x80040E3E -2147217858 A column ID was occurred more than once in the
specification
0x80040E3F -2147217857 The specified table already exists
0x80040E40 -2147217856 The specified table was in use
0x80040E41 -2147217855 The specified locale ID was not supported
0x80040E42 -2147217854 The specified record number is invalid
0x80040E43 -2147217853 Although the bookmark was validly formed, no
row could be found to match it
0x80040E44 -2147217852 The value of a property was invalid
0x80040E45 -2147217851 The rowset was not chaptered
0x80040E46 -2147217850 Invalid accessor
0x80040E47 -2147217849 Invalid storage flags
0x80040E48 -2147217848 By-ref accessors are not supported by this
provider
0x80040E49 -2147217847 Null accessors are not supported by this
provider
0x80040E4A -2147217846 The command was not prepared
0x80040E4B -2147217845 The specified accessor was not a parameter
accessor
0x80040E4C -2147217844 The given accessor was write-only
0x80040E4D -2147217843 Authentication failed
0x80040E4E -2147217842 The change was canceled during notification; no
columns are changed
0x80040E4F -2147217841 The rowset was single-chaptered and the chapter
was not released
0x80040E50 -2147217840 Invalid source handle
0x80040E51 -2147217839 The provider cannot derive parameter info and
SetParameterInfo has not been called
0x80040E52 -2147217838 The data source object is already initialized
0x80040E53 -2147217837 The provider does not support this method
0x80040E54 -2147217836 The number of rows with pending changes has
exceeded the set limit
0x80040E55 -2147217835 The specified column did not exist
0x80040E56 -2147217834 There are pending changes on a row with a
reference count of zero
0x80040E57 -2147217833 A literal value in the command overflowed the
range of the type of the associated column
0x80040E58 -2147217832 The supplied HRESULT was invalid
0x80040E59 -2147217831 The supplied LookupID was invalid
0x80040E5A -2147217830 The supplied DynamicErrorID was invalid
0x80040E5B -2147217829 Unable to get visible data for a newly-inserted
row that has not yet been updated
0x80040E5C -2147217828 Invalid conversion flag
0x80040E5D -2147217827 The given parameter name was unrecognized
0x80040E5E -2147217826 Multiple storage objects can not be open
simultaneously
0x80040E5F -2147217825 The requested filter could not be opened
0x80040E60 -2147217824 The requested order could not be opened
0x80040E61 -2147217823 Bad tuple
0x80040E62 -2147217822 Bad coordinate
0x80040E63 -2147217821 The given axis was not valid for this Dataset
0x80040E64 -2147217820 One or more of the given cell ordinals was invalid
0x80040E65 -2147217819 The supplied columnID was invalid
0x80040E67 -2147217817 The supplied command does not have a DBID (Note: DBID is SQL shorthand for Database ID.)
0x80040E68 -2147217816 The supplied DBID already exists
0x80040E69 -2147217815 The maximum number of Sessions supported by the
provider has already been created. The consumer
must release one or more currently held Sessions
before obtaining a new Session object
0x80040E72 -2147217806 The index ID is invalid
0x80040E73 -2147217805 The initialization string does not conform
to specification
0x80040E74 -2147217804 The OLE DB root enumerator did not return any
providers that matched an of the SOURCES_TYPEs
requested
0x80040E75 -2147217803 The initialization string specifies a provider
which does not match the currently active
provider.
0x80040E76 -2147217802 The specified DBID is invalid
0x80040E6A -2147217814 Invalid trustee value
0x80040E6B -2147217813 The trustee is not for the current data source
0x80040E6C -2147217812 The trustee does not support memberships/
collections
0x80040E6D -2147217811 The object is invalid or unknown to the provider
0x80040E6E -2147217810 No owner exists for the object
0x80040E6F -2147217809 The access entry list supplied is invalid
0x80040E70 -2147217808 The trustee supplied as owner is invalid or
unknown to the provider
0x80040E71 -2147217807 The permission supplied in the access entry list
is invalid
0x80040E77 -2147217801 The ConstraintType was invalid or not supported
by the provider.
0x80040E78 -2147217800 The ConstraintType was not CONSTRAINTTYPE_FOREIGNKEY
and cForeignKeyColumns was not zero
0x80040E79 -2147217799 The Deferrability was invalid or the value was not
supported by the provider
0x80040E80 -2147217792 The MatchType was invalid or the value was not
supported by the provider
0x80040E8A -2147217782 The UpdateRule or DeleteRule was invalid or the
value was not supported by the provider
0x80040E8B -2147217781 The pConstraintID did not exist in the data source
0x80040E8C -2147217780 The dwFlags was invalid
0x80040E8D -2147217779 The rguidColumnType pointed to a GUID that does not
match the object type of this column or this column
was not set
0x80040E8E -2147217778 The requested URL was out-of-scope
0x80040E90 -2147217776 The provider could not drop the object
0x80040E91 -2147217775 There is no source row
0x80040E92 -2147217774 The OLE DB object represented by this URL is locked
by one or more other processes
0x80040E93 -2147217773 The client requested an object type that is only
valid for a collection
0x80040E94 -2147217772 The caller requested write access to a read-only
object
0x80040E95 -2147217771 The provider could not connect to the server for
this object
0x80040E96 -2147217770 The provider could not connect to the server for
this object
0x80040E97 -2147217769 The attempt to bind to the object timed out
0x80040E98 -2147217768 The provider was unable to create an object at
this URL because an object named by this URL
already exists
0x80040E99 -2147217767 The provider could not drop the object
0x80040E9A -2147217766 The provider was unable to create an object
at this URL because the server was out of
physical storage
0x00040EC0 265920 Fetching requested number of rows would have
exceeded total number of active rows supported
by the rowset
0x00040EC1 265921 One or more column types are incompatible;
conversion errors will occur during copying
0x00040EC2 265922 Parameter type information has been overridden
by caller
0x00040EC3 265923 Skipped bookmark for deleted or non-member row
0x00040EC4 265924 Errors found in validating tree
0x00040EC5 265925 There are no more rowsets
0x00040EC6 265926 Reached start or end of rowset or chapter
0x00040EC7 265927 The provider re-executed the command
0x00040EC8 265928 Variable data buffer full
0x00040EC9 265929 There are no more results
0x00040ECA 265930 Server cannot release or downgrade a lock until
the end of the transaction
0x00040ECB 265931 Specified weight was not supported or exceeded
the supported limit and was set to 0 or the
supported limit
0x00040ECC 265932 Consumer is uninterested in receiving further
notification calls for this reason
0x00040ECD 265933 Input dialect was ignored and text was returned
in different dialect
0x00040ECE 265934 Consumer is uninterested in receiving further
notification calls for this phase
0x00040ECF 265935 Consumer is uninterested in receiving further
notification calls for this reason
0x00040ED0 265936 The operation is being processed asynchronously
0x00040ED1 265937 In order to reposition to the start of the
rowset, the provider had to reexecute the
query; either the order of the columns changed
or columns were added to or removed from the
rowset
0x00040ED2 265938 The method had some errors; errors have been
returned in the error array
0x00040ED3 265939 Invalid row handle
0x00040ED4 265940 A given HROW referred to a hard-deleted row
0x00040ED5 265941 The provider was unable to keep track of all
the changes; the client must refetch the data
associated with the watch region using another
method
0x00040ED6 265942 Execution stopped because a resource limit has
been reached; results obtained so far have been
returned but execution cannot be resumed
0x00040ED7 265943 The bind failed because the provider was unable
to satisfy all of the bind flags or properties
0x00040ED8 265944 A lock was upgraded from the value specified
0x00040ED9 265945 One or more properties were changed as allowed
by provider
0x00040EDA 265946 Errors occurred
0x00040EDB 265947 A specified parameter was invalid
0x00040EDC 265948 Updating this row caused more than one row to
be updated in the data source
0x00040EDD 265949 The row has no row-specific columns
It can be an Access Violation or a Division by zero exception.
But it is hard to know, since you provided no code at all.
in windows.pas found:
STATUS_INTEGER_DIVIDE_BY_ZERO = DWORD($C0000094);
STATUS_INTEGER_OVERFLOW = DWORD($C0000095);
Using Saxon-B, I'm trying to follow the javadoc and serially reuse an XsltTransformer object.
I'm thwarted by:
Error
XTDE1490: Cannot write more than one result document to the same URI, or write to a URI
that has been read: file:/Users/benson/x/btweb/web_2_0/sites/us/errors/404/404.xml.prepared
2011-03-22 11:06:23,830 [main] ERROR btweb.compiler.CompileSite - Site compilation terminated with error.
btweb.compiler.CompilerException: Error running transform Cannot write more than one result document to the same URI, or write to a URI that has been read: file:/Users/benson/x/btweb/web_2_0/sites/us/errors/404/404.xml.prepared
It's probably Saxon-B bug. You can find more information here. According to this site "Fixed in 8.9.0.4".