I have created a developer account for two weeks, and now I want to submit my first App. However, when I click new app, the bundle ID list does NOT show the project I would like to submit, but It do show some projects I used to practice. I have look up a variety of solutions on internet, including sign out and log in again, or clean up my Safari data. I have suspected some reason, but I'm not quite sure if it right?
First doubt : some SDK import?
The Bundle ID shows on the list are some small project I used to practice when I was a beginner. Recently, I have tried to use some SDK like Facebook SDK and Firebase. Facebook and Firebase works fine on my simulator and iPhone devices. So I'm not quite think this might be the reason, nut just type on in case I missed something
Second doubt : Xcode version?
When I tried to using Firebase, since iOS 13.3.1 seems not to support, so I update my iPhone to iOS 13.4.1. However, the Xcode should also be updated to 11.4.1, otherwise it cannot connect to my devices. When I look up the bundle IDs listed on App Store Connect, I think those projects are created before I updated Xcode. The project created after updated not showed on the list. But I have created too many projects to practice, so I'm not quite sure I remembered right. I suspect this might be the reason, anyone else met the same problem after updated Xcode?
By the way, there is also a strange thing confused me. I have deleted some projects I used to practiced on my MAC, but they stilled shown on the list... I have manually deleted on my Apple Developer Web.
1) Go to https://developer.apple.com/account and set up the app with its explicit bundle ID.
2) Then go to https://appstoreconnect.apple.com > "Create new app" > Select the previously created bundle ID.
This does not really have anything to do with SDK usage or Xcode setup. (Automatic code signing might do some steps for you, but the most bullet-proof way is mentioned above)
I manually deleted my app from the iPhone and now I get this error message when trying to run it again from Xcode.
I cleaned the build folder, restarted the device, Xcode and the Mac, nothing helps.
I also tried everything that's mentioned here: Install claimed to have succeeded, but application could not be found on device
How do I force a re-installation?
As always, when the question is posted on SO, one finds a solution ;)
I edited the Scheme, setting the build configuration from debug to release and that installed the app again. Changed it back to debug and now it's running again as expected.
I ran into the same issue while testing a app on iOS 13 via XCode 11.0. Building via the legacy system solved it (File > Workspace Settings... > Build System > Legacy Build System).
Hope it helps
I had a similar issue after one of Carthage/XCode updates. It means iOS was not able to install app on the phone. XCode apparently is not able to provide this information directly. The first thing to do is open your phone console - go to Window/Devices and Simulators then select your device and click Open Console. In the console you can search for your app name what should provide you more detailed fail info. In my case it was sth like this:
Applications did fail to install: (
"<LSApplicationProxy: 0x118913b60> com.mydomain.myapp (null) <com.mydomain.myapp <INVALID >:0>"
) (appInfos: (null))
There was another console log few rows before flagging the problem:
0x16f4df000 -[MIExecutableBundle codeSigningInfoByValidatingResources:performingOnlineAuthorization:ignoringCachedSigningInfo:checkingTrustCacheIfApplicable:error:]: 789: Code signing identifier (org.alamofire.Alamofire.iphonesimulator) does not match bundle identifier (org.alamofire.Alamofire.iphoneos) for /private/var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.E83T1l/extracted/myapp.app/Frameworks/Alamofire.framework
There was an issue with one of the frameworks Alamofire I'm using in the project. I changed bundle identifier of the project and build framework again what solved the problem.
Hope it helps!
In my case, the problem was an embedded framework that was not being signed. In the General tab of the project settings, setting the embed setting to 'Embed & Sign' did the trick.
In my case it was a problem with new Development certificate. It's created automatically after Xcode updated to 11 and may not be included in current provisioning profile.
I was facing similar issue in Xcode 11.1. I have fix this issue. Not sure about this solution that it will to work for all or not.
My device iOS version was older then the iOS Xcode target build version.
Steps:
I have put Xcode target Device to iPhone device OS version.
Delete derived data
Start xcode and open project
Clean the project and gererate build and install in device
Note: Please check your developer account, certificate validation and already registered device warning.
Hope this solution will help some peoples. Happy coding.
After trying everything here, for me the solution was to change my distribution profile to use the new Apple distribution certificate that covers all apple platforms. This should be compliant with xcode 11 (if you're not experiencing one of the other million problems since the "upgrade").
The cert change is mentioned here:
https://developer.apple.com/documentation/xcode_release_notes/xcode_11_release_notes
Cert creation instructions here:
https://help.apple.com/developer-account/#/devbfa00fef7
Once done, make sure the correct profile is selected in Signing & Capabilities, and 'Apple Distribution' is selected under Build Setting -> Signing for the appropriate build configurations
A solution that solved this issue for me was to check the signing team for my tests target. Selecting the same development team then meant that my app was able to be built and run on device.
Build system: New Build System
Xcode: Version 11.1
Uninstall all the other apps that are under the same "Organization" or "Bundle Identifier" with your current app and try again.
It works for me. Hope it does for you too.
On your iPhone go to Settings/General/Profiles & Devices/Apple Development: "YOUR APPLE ID" and delete all apps from there. It fixed the problem for me.
It happened to me when trying to launch a watchOS app on a real device.
The only solution that worked was:
Delete iOS app from device
Delete watchOS app from device
Close and reopen Xcode
Clean build folder
I did a Product -> Clean then Build, and it was able to run.
Go to settings on your phone and wipe out all certificates and apps and then install your app again. That helped me
Problem occured on XCode 11
TL;DR:
Try changing Embed option in General=>Section Frameworks, Libraries.. to Do Not Embed (although it sounds strange)
In my General=>Section Frameworks, Libraries.. list are Security.framework and the CocoaPods Pods_projectname.framework amongst others. Default setting of these two was Do Not Embed. Sounded strange to me, so I changed it without need alternating to Embed & Sign or Embed Without Signing. With both options the error occured!
On your iPhone go to Settings/General/Profiles & Devices/Apple Deelopment: "YOUR APPLE ID" and delete all apps from there. It fixed the problem for me.
This was the solution that worked for me.
Please double check the bundle ID of the installed application to see if it is re-applied, this will also cause this problem .I uninstall the app and solve the problem.
In my case i have PROD certificate and trying to install the app in the device, later i changed to development certificate it got installed.
As Marcin's answer suggested, I visited the phone console and in my case, it is this error message:
-[MIFreeProfileValidatedAppTracker _onQueue_addReferenceForApplicationIdentifier:bundle:error:]: 182: This device has reached the maximum number of installed apps using a free developer profile: {(
So if you are signing your app with a Personal Team certificate, make sure that you don't have more than 3 apps.
Read more here: Why can I not install more than three apps?
As for me,
I added a custom key-value to Info.plist of main watchOS application file. That was wrong.
After removing it, all works correctly.
It seems this is not allowed but where is no other information about it.
If you have other under-development apps installed, try uninstalling those you are not using, and run Xcode to install your app again. It works for me.
I can Archive and Publish an app in debug mode, but when switched to App Mode i get the following error:
/Library/Frameworks/Mono.framework/External/xbuild/Xamarin/iOS/Xamarin.iOS.Common.targets: Error: No valid iOS code signing keys found in keychain. You need to request a codesigning certificate from https://developer.apple.com.
the attached file shows i do have the relevant Certificates but Xamarin keeps complaining
The app has been successfully published before but using a different profile on the same mac. Both users key chains contain the same certificates
I resolved that changing plataform build configuration from iPhone to iPhoneSimulator.
got it work in the end by remving all the certificates and then putting them back in the Key chain
I get this error when I open Xamarin University Exercises with Visual Studio 2015. A bug was entered and they decided that it is expected behavior. Xamarin Bug
If you work in Xamarin Studio and set this property for whatever reason, then open it in VS, you may hit this issue with no way to edit / remove the Entitlement setting in the Project Properties.
I guess the Exercises are created with Xamarin Studio.
The accepted workaround is to open the iOS .csproj and manually edit the <CodesignEntitlements></CodesignEntitlements> for the Debug|iPhone PropertyGroup.
I struggled too for the last day to make Xamarin (now Visual Studio for Mac) successfully deploy on my device with the free developer signing (since I'm new in this area and I'm not ready yet to join the developer program yet), and what helped was to first deploy a dummy app with the same bundle identifier from XCode like others suggested on different sources, keep CodesignEntitlements as it is in the .csproj file, but replace CodesignKey's value iPhone Developer like in the answer here: https://stackoverflow.com/questions/58062268/no-valid-ios-code-signing-keys-found-in-keychain-you-need-to-request-a-codesign#=
Hope this will help somebody in the future like it helped me!
Sometimes that happens when you newly start your computer and Visual Studio. Just don't hit green triangle debug Combobox-button and check what is selected in this combobox. If it is "Device" as in picture 1 select a simulator from the list as in picture 2 and start debugging. Else you get this error since VS will try to start debugging in a real device if "Device" selected in the combobox.
you can try either of this
remove any keys, if existing form Entitlements.plist .
Change the proj run mode to debug , select device .
I needed to create Signing Identity certificate from scratch and recreate Provisioning Profiles (on apple developer site). Then download using xcode.
We have been trying to submit an app to the iTunes store using Application Loader for three days and keep getting stuck at the "Authenticating with the iTunes store" step.
We have read many forums (including stackoverflow) and tried what was suggested:
making a new provisioning profile
using different or multiple versions of Application Loader
changing proxy settings
rebooting the Mac
uploading at a different time of the day, etc.
We have even left it running overnight and have not had success with getting past this step. Unfortunately, no feedback is given about what the issue may be, and we have not gotten any error messages. We have submitted multiple apps without any difficulty in the past but are completely stuck this time!
How were you able to solve it?
This only started happening to me today (May 2017) and no answers in this thread solved my issue. The resolution for me was from here;
https://forums.developer.apple.com/thread/76803
Open Terminal. Change to home directory,
cd ~
Move the current transporter directory,
mv .itmstransporter/ .old_itmstransporter/
Invoke the following file to let Transporter update itself.
"/Applications/Xcode.app/Contents/Applications/Application Loader.app/Contents/itms/bin/iTMSTransporter"
Wait till it updates, then open Xcode and attempt upload.
You have to agree to a new sign up in Application Loader. Select "Application Loader" under the "Xcode -> Open Developer Tool" menu (the first menu to the right of the Apple in the menu bar). Once you open Application Loader there will be a prompt to agree to new terms and then to login again into your iTunes account. After this any upload method will work.
Just wait. In a few minutes all will be ok.
Dec 10th 2019, Xcode Version 11.2.1, MacOS X 10.15.1
I was facing exactly same issue yesterday and I thought it might be network issues, at least it looks like so. But this morning I had tried couple different networks and several VPN connections, none of them is working!
The highest voted answer here asks me to reset a cache folder named .itmstransporter under my home dir, the run a program iTMSTransporter under a specific folder, but I can't find both of them.
But soon I figured that it is the cache folder for the people who uses the legacy uploader program: Application Loader, which is deprecated by Apple and can be no longer found in Xcode 11. Then I found that the latest Xcode has located iTMSTransporter here:
/Applications/Xcode.app/Contents/SharedFrameworks/ContentDeliveryServices.framework/itms/bin/iTMSTransporter
And its cache folder is here:
/Users/your_user_name/Library/Caches/com.apple.amp.itmstransporter/
I removed my existed cache folder, and run iTMSTransporter without any parameter, it soon started to output logs and download a bunch of files, and finished in 2 or 3 minutes. Then I tried again to upload my ipa file, it works!!!
CONCLUTION:
Either the old Application Loader, or the latest Xcode, uses a Java program iTMSTransporter to process the ipa file uploading.
To function correctly, iTMSTransporter requires a set of jar files downloaded from Internet and cached in your local folder.
If your cache is somehow broken, or doesn't exist at all, directly invoking iTMSTransporter with functional parameters such as --upload-app in our case, iTMSTransporter DOES NOT WARN YOU, NOR FIX CACHE BY ITSELF, it just gets stuck there, SAYS NOTHING AT ALL! (Whoever wrote this iTMSTransporter, you seriously need to improve your programming sense).
Invoking iTMSTransporter without any parameter fixes the cache.
A functional cache is about 65MB, at Dec 10th 2019 with Xcode Version 11.2.1 (11B500)
I was stuck at "Authenticating with the iTunes Store" today. I had used the same version and build number as a previous submission. After I updated the build number, the upload went fine. I don't know if it's related, or if it was a coincidence.
I had the same issue for months, I just removed hotspot shield and private tunnel applications from my computer and tried to upload my app and everything worked just fine. so I suggest if you have installed any VPN application on your computer, remove the application and then try uploading your app from either application loader or xcode's organizer.
Try answer mentioned in this Reference Link, it really worked for me and for others as well.
Mentioning answer here as well.
Open Terminal and run:
cd ~
mv .itmstransporter/ .old_itmstransporter/
"/Applications/Xcode.app/Contents/Applications/Application Loader.app/Contents/itms/bin/iTMSTransporter"
iTMSTransporter will then update itself, then you can try uploading in XCode again or via application loader.
There is no magic fix. Itunes is just working bad. Lately is having more and more issues and it takes more and more to update and send an ipa to the store.
I had this issue with AppLoader and Xcode organiser too and after trying multiple times it just went through.
Changing network connection helped.
Turned off wifi on my phone
Enabled 3G
Created HotSpot
Connected my mac to the hotspot and got through the authetication issue
In my case, I hadn't agreed to the newest Developer Agreement. Just run Application Loader once, click on [Accept] to agree, then quit the Application Loader and the Upload to App Store should work fine.
Following worked for me.
Open another instance of Application Loader.
( Select "Application Loader" under the "Xcode -> Open Developer Tool" menu)
"Agree" to the terms.
After completing Step 2. First instance of Application Loader proceeded to the next step and build got submitted.
I have also encounter the same issue. One possible solution is to go to Xcode -> Preferences -> Accounts and from the left menu select on App ID then click on the View Details and tap on the refresh button. while reloading you will get following error
The selected team's agent, 'ADMIN NAME' must agree to the latest
Program License Agreement.
If you will not get above error, Following solution will not work.
It means that you need to login into the developer account using Admin login and accept that latest agreement.
Then you will be able to upload binary on the app store.
The updated answer for Xcode 11.x.x and Transporter application, open terminal:
rm -rf ~/.itmstransporter/
"/Applications/Transporter.app/Contents/itms/bin/iTMSTransporter"
Wait a while
Problem solved!
I'm running MacOS Mojave 10.14.6, Xcode 11.3.1 and Transporter 1.1.1, and always got stuck at the Authentication with App Store stage, no matter how long I wait, I tried uploading using Xcode, using xcrun altool, Transporter, nada.
Finally I got it working by exporting the ipa file to a new Macbook (10.15.3, Xcode 11.3.1, Transporter 1.1.1), and used the Transporter app to upload it there.
The key difference is the Transporter tool on my new Macbook asked for a 6-digit code as authentication while the old Macbook did not, I suspect the authentication token on my old device expired but the system didn't ask for a new one when trying to upload the app. I had 2-FA enabled.
So I think forcing a manual re-authentication when you upload the app is the answer, the only other difference is the MacOS version, but I didn't test if it'll make a difference.
I solved the problem by removing ~/Library/Caches/com.apple.amp.itmstransporter.
For safety, renaming will be better,
cd ~/Library/Caches
mv com.apple.amp.itmstransporter com.apple.amp.itmstransporter.old
Then, xcrun altool uploaded my ipa successfully.
By the way, I'm using Xcode 11.x & 12.2, macOS Catalina.
In 2020 Dec, the fix did finally worked for me was restarting my mac.
Today I ran into this issue, on Xcode 11.2.1 I solved it by going to Xcode -> Preferences -> Accounts -> Tapped on the '-' next to my Apple ID, then signed in again. This fixed it for me!
In April 21, 2021, I followed #DawnSong's answer, outlined in the image below but I also restarted my Mac and voila it worked.
Spec
Xcode 12.4
macOS Big Sur 11.2.3
You may try to relogin your ITC account via Application Loader.
Just try a different Internet connection. I tried all the solutions above but none worked. However, when I tried using my cellular connection (instead of my DSL connection that stands behind a firewall), it worked immediately.
It might be a network issue. If you are running inside a virtual machine (e.g. VMWare or VirtualBox), try setting the network adapter mode from the default NAT to Bridged.
All i did was duplicate my Application Loader.app in /Applications and
ran both Application loaders at the same time.
this solution is out there, it used to work for me, but today not even that! what I did and worked is that (2 instances) + uploading with XCode (organizer). Had to try a couple of times and it worked.
hope this helps someone, this bug has been there for quite a lot of time now() an apple doesn't seem to care too much
Another reason could be that you have changed the machine from which you're submitting the app. Or the user account on the machine. The new machine may lack the private key and/or certificate for the App Store. Although a certificate with the correct name is displayed in Xcode.
In this case, go to https://developer.apple.com -> certificates, use the plus sign (+) to add a new certificate (distribution), and follow the steps to request a certificate for the private key on your current machine. After installing the certificate, authentication may work.
For me I tried almost all the suggestions given above but the problem still reoccurred after the first success in uploading to App store. Until I found this website. In summary, do the following
Open terminal
Run this command:
rm -rf ~/.itmstransporter/
ā/Applications/Xcode.app/Contents/Applications/Application
Loader.app/Contents/itms/bin/iTMSTransporterā
Note: this command(which is different from others above) will delete your ITMSTansporter folder and create a new one and ensure that xcode is quitted before running this command.
3. Start Xcode and all should be well.
Using Xcode 12.3 Distribute App and xcodebuild both got stuck today at this point.
I finally was able to solve this. Peeking around my system I found 3 versions of iTMSTransporter.
Printing the version of each using ./iTMSTransporter -version gives the following results:
/Applications/Transporter.app/Contents/itms/bin/ has version 2.0.0
/Applications/Xcode.app/Contents/SharedFrameworks/ContentDeliveryServices.framework/Versions/A/itms/bin/ has version 2.1.0
/usr/local/itms/bin/ has version version 1.9.3
So it looks that old version in /usr/local/itms was used by Xcode. After deleting /usr/local/itms I was able to upload my binary within Xcode 12.2 and using the xcodebuild command line tool.
Check your firewall
Network settings - (Check with network admin, usually they have blocked apple services unknowingly)
Check your system data/time.
I had same sort of issue, I resolved it by getting direct access to internet.
Also check Application Loader logs to see at which point it gets stuck.
I think I followed all the approaches given, but none worked for me.
My own approach that seems to work for me is to go thru the initial steps to upload a binary, then, after selecting the binary, do NOT click Send; instead close the window, and in the new window that will appear, start anew: hopefully it will go thru.
Found the solution:
I was uploading the build, Every activity went well except āAuthenticating with the iTunes storeā.
I disconnected my LAN cable and Connected my MAC with my mobile hotspot. and authentication problem was solved. If you have a limited internet plan then as soon as you pass authentication stage, again connect your LAN so that it will upload the app from you LAN cable's internet connection.
my upload failed each time when I uncheck the "include bitcode" option when uploading. So I checked the "include bitcode" option and upload went well.
Check your Firewall, If it is "On" then just Off it, then try