I have a formula as follows which I'm using for a scheduling system within Google Sheets:
=IF(B2="","",(CONCATENATE($B$1&" "&B2&CHAR(10)&$C$1&" "&C2&CHAR(10)&$D$1&" "&D2&CHAR(10)&$E$1&" " &E2&CHAR(10)&$F$1&" " &F2&CHAR(10)&$G$1&" " &G2)))
currently my formula works b2 has a value inside it which is great, what I want however, is for the formula only to show if one value is inside either.
B2, C2, D2, E2, F2 or G2.
so if c2 has a value I want the formula to parse.
I've tried
=IF(B2,C2,E2) etc with no luck.
I've also tried:
=IF(OR(B2="",C2="") which parsed the formula but kept it visible even with no data.
Reason for this is that I pull these fields into a master schedule and I only want it to show when one of the fields is populated, if that makes sense? otherwise the schedule will look far to busy.
https://docs.google.com/spreadsheets/d/1KE3VOI43M4-QlWB0EZldCqR73d3RHDnRnUNlv1MqLMo/edit?usp=sharing
Document for you guys.
Cheers!
If your goal is to show a formula when any of a given range of cells is not empty (and display nothing if they are all empty), you can simplify your condition check by first joining all ranges, and then comparing to the empty string:
=IF(JOIN("", B2:G2)="", "", "Your Formula")
You need to use AND() instead of OR().
=IF(AND(B2="", C2=""), "", "Formula")
Also, although this makes the formulas longer, I do prefer to use a combination of IFERROR(), ISBLANK(), and NA(). I prefer this because a blank cell is not the same as one with an empty string in it. So my preferred way of writing the above would actually be:
=IFERROR(IF(AND(ISBLANK(B2), ISBLANK(C2)), NA(), "Formula"))
just another solution I came across which I thought was much better than my own and made the data above a little tidier.
=IF(A2<>"",CONCATENATE(IF(B2<>"",$B$1&": "&B2&CHAR(10),),
IF(C2<>"",$C$1&": "&C2&IF(OR(D2<>"",E2<>"",F2<>"",G2<>""),CHAR(10),),),
Essentially this will populate only whats selected instead of populating all the fields in headers and then populating the scheduled work stream.
Related
I have a google sheet with multiple tabs, one of the tabs is for holding each observation of data while another needs to combine data based on certain criteria. I am trying to use a SUMIFS within and ARRAYFORMULA to get the correct information and it will only pull "0" no matter what I try.
I have set up a test google sheet with some dummy information to show an example of what I need to do in a more complex situation.
https://docs.google.com/spreadsheets/d/1JLyEuVijQ8MvfOKrtbRD_YKmRDnTCxf7qCSw9Ggty_Y/edit#gid=1250575550
In this example, the data tab is the individual observations and the sums tab is where I'm trying to pull combinations. I need column D to sum the totals in column E on the data tab if the Month and Year and Type all match what is on the sums sheet. In this example, cell D3 on the sums tab should equal 11.
you cannot use SUMIFS() in Arrayformula(), along with many other functions, though there is no formal documented list.
In your case you can use a SUMIF() instead by &'ing the condtions together.
I've demoed the concept on a new tab called MK_Help in cell D2:
=ARRAYFORMULA(IF(ROW(A2:A) = ROW(A2), "# TOTAL TYPE", IF(A2:A = "", , SUMIF(data!A:A&data!B:B&data!C:C,A2:A&B2:B&C2:C,data!E:E))))
Note that I made a couple of other small changes to your formula.
Namely, that you should always use a true "empty" instead of double quotes in your IF() mask up front tor return empty when there's no value in A. Double quotes("") is actually not quite empty for many other things in Google sheets.
Also I modified your header conndition from ROW(A2:A)=2 to ROW(A2:A) = ROW(A2). I find that this is a more flexible condition for the header as it allows you to potentially insert/delete rows above the header without breaking things.
It seems QUERY() may be good choice. Try-
=QUERY(data!A2:E,"select A,B,C, sum(E) where A is not null group by A,B,C",1)
If you need specific month then you can add criteria to where clause like-
=QUERY(data!A2:E,"select A,B,C, sum(E) where A =5 group by A,B,C",1)
I'm looking for a way to add together a dynamically generated list of ranges using (I'm guessing) an ARRAYFORMULA.
The normal way of attacking this is fine if there is a known list of ranges, the example of the results I want would work using this:
=ARRAYFORMULA( A1:A10 + B1:B10 )
In the case I'm after I want to add together ranges in multiple sheets. I don't want the users to have to manually adjust the array formula every time they add a new sheet to be calculated, and I also want to be able to add some logic to include or remove the particular sheet from the calculation, but for now I'm happy to ignore that and just focus on adding cells together.
My approach to this was to create a column with a list of names, each one matching a sheet in the document, and then using that list to dynamically build the list of ranges to add together, using INDIRECT.
.------------.
| sheet1 | <---- SheetListNamedRange
|------------|
| sheet2 |
`------------'
Here's a quick example
=ARRAYFORMULA( INDIRECT("'" & SheetListNamedRange & "'!D4:75") )
There are lots of failure modes depending on how it's done, but this particular formula only puts in the values of the first sheet and ignores any others, which I guess makes sense.
What I'm after is kind of the equivalent of i++ in a loop found in a normal coding language. Is there some way of making this work?
If I understand you correctly, you'd like to get a list generated based on different ranges across different sheets. If your case is as simple as the one you mention in the beginning of your post, the following would do the job.
={Sheet1!A1:A2; Sheet2!B1:B2}
If you want the sum of all these values, you can use SUM.
=SUM({Sheet1!A1:A2; Sheet2!B1:B2})
Please let me know if this isn't what you were looking for, so I can change the answer accordingly.
you can't refer to array of arrays in INDIRECT. you will need to INDIRECT each sheet which contains array.
=SUMPRODUCT(ARRAYFORMULA(INDIRECT(A1&"!"&"D:D")+
INDIRECT(A2&"!"&"D:D")+
INDIRECT(A3&"!"&"D:D")+
INDIRECT(A4&"!"&"D:D")))
note1: in this case result is 25 as sum of 10 + 15.
10 is sum of sheet1!D:D
and 15 is sum of sheet2!D:D
note2: there is no sheet3 and sheet4 which is equal to 0 in INDIRECT
note3: D:D of the sheet where you have the list of sheets needs to be empty
Here's the straightforward version of my question:
I want to change the following formula to an array formula...
Original formula (from cell J2):
=if(F4="VM:",G4,J1)
My attempt at converting to an array formula (in cell K1):
=arrayformula(if(row(A:A)=1,G3,if(F:F = "VM:",G:G,indirect("K"&row(A:A)-1))))
This works on rows where F = "VM:", but returns a #REF error on other rows. Function INDIRECT parameter 1 value is 'K0'. It is not a valid cell/range reference.
Thoughts on how to fix this?
The more complex version of my question. i.e. Why am I trying to do this?...
I have a weird spreadsheet with data that should really be in a Wiki.
I want to create filter views for each person so they can easily filter on only their own vendors. The original formula will work, but as more vendors are added, I'd like for the formula to automatically work for those rows as well.
If there's a better way to do this, I'm listening.
I don't exactly understand your needs, but If you want to autopopulate your formula, then you only need this code in desire column in row 4 (you can change this to any other - this will autofill down from this point):
=ArrayFormula(if(F4:F="VM:",G4:G,J1:J))
Is this what you are trying to get?
After clarification:
You need this code in J2 only:
=ArrayFormula(VLOOKUP(ROW(J2:J),
QUERY({F:G,ROW(G:G)},"select Col3,Col2 where Col1='VM:'",1)
,2,1)
)
Works for you?
maybe you just need to hide errors?
=IFERROR(ARRAYFORMULA(IF(ROW(A:A)=1,G3,IF(F:F = "VM:",G:G,INDIRECT("K"&ROW(A:A)-1)))),)
I watched a tutorial where the author uses an IF statement along with the ARRAYFORMULA function to add a title row to a column of data. Links are given to the docs; however, for an example of how to use ARRAYFORMULA see this answer.
An example can be seen below:
I was able to populate the C column by placing the following formula in C1:
=ARRAYFORMULA(if(row(A:A) = 1, "spent", B:B - A:A))
I'm confused about the syntax. I understand that X:X references the entire X column but I don't understand how it's being used to check if we're at cell A1 in one context and then being used to apply mass formulas in another context.
How does the above line work?
Can you illustrate with some examples?
It sounds to me that the information you learned led you to expect that row(A:A)=1 translates to row A1?
It works a little different than that, the syntax as your using it now, is basically saying if any row in A:A has a value of 1, then write "spent" else subtract B-A
My suggestion:
use a literal array to make your header, then use the if(arrayformula) to only populate rows with values, for aesthetics:
Example:
={"Spent";arrayformula(if(isnumber(A2:A),B2:B-A2:A,))}
Explanation:
The {} allow you to build a literal array, and using a semicolon instead of a comma allows you to stack your cells vertically, following that we check if there is a value in column A, if so, subtract A from B, else leave it blank.
why not just put the column title directly on the first row cell, and start the array formula from the 2nd row, using the A2:A, B2:B syntax?
If something does not have to be in a formula, better put it directly on the cell - simpler for others to understand what's going on, and the formula will be simpler.
If you put the array formula in line 2, and someone sorts the data, then the arrayformula will move. If it is in the header line, this is less likely to happen.
You can also use the IFS function to achieve a similar effect to the array,
=arrayformula(ifs(row(A1:A)=1,"Spent",A1:A="",,True,B1:B-A1:A)
Here the first condition checks the row number, and if it is row ONE, then inserts a Column Header.
The Second condition - A1:A="",, - ensures that blank lines are ignored.
The Third condition True (ELSE) performs the calculation.
This method also allows for different calculations to performed on different rows depending on requirements.
Okay, I'm an huge noob with that kind of stuff, and I don't really know where to begin with. Google help is somehow not enough :/.
I want to make a conditionnal count on a single column :
COUNTIF(A1:A10, "3")
It will return the number of 3 in the cells from A1 to A10. Now the problem is, there can be multiples values in each cell formatted like this : "1; 3; 5". I can easily match this using regex :
B1 = REGEXEXTRACT(A1,"3")
Then repeat and sum on the second column. Now, how can I do this using a single formula?
COUNTIF(A1:A10, REGEXEXTRACT(A1:A10,"3"))
This doesn't work because regexextract take as an input a single cell. I would like to tell it to use the same cell than in the countif, but I have no clue on how to achieve this.
you can have regextract working on an array. E.g.:
=ArrayFormula(sum(--regexmatch(A2:A&"", "3")))
should count all threes (either single or in cells with multiple values), but in case you have multiple threes in one cell, you may need to use something like this:
=ARRAYFORMULA(sum(len(A:A)-len(SUBSTITUTE(A:A,"3","")))/len("3"))
This should work:
=COUNTIF(SPLIT(JOIN(";",A:A),";"),"3")