Trying to get any TFS build definition to come pre-equipped with nuget restore so we can get the packages folder out of source control, but don't have a way to make sure these steps are at the beginning of every new build definition automatically. Any ideas?
You can't force it. You can encourage people to use templates (either the out-of-the-box templates or templates you create yourself), but you can't say "only allow users to create build definitions based on templates".
Related
TFS provides a list of templates that I can use for new build definitions:
Once I've used "Save as template..." on a build definition, I can then use it as a template within that project:
But when I switch to a different project, that custom template is no longer available.
How can I create a build template that I can use in any project?
There is no way to directly copy or sync a vNext build definition template between team projects on the Web Portal. The build definition template is only for the present team project. So you need to create a build definition template for each team project.
And also there have been a feature request in user voice, you can vote up and monitor it
VSO build vnext: share build templates between projects
https://visualstudio.uservoice.com/forums/330519-team-services/suggestions/8468566-vso-build-vnext-share-build-templates-between-pro
However, for a workaround, you can use the REST API to perform this. Here is an example shown in the blog.
It shows how to get the JSON response of a build definition and again using the same reference to make a new one in the project you desire.
You can also take a look at this nice article: How to move build definitions in TFS to other projects using the REST API
As for now it is not supported but you can vote it up to make it happen faster:
https://visualstudio.uservoice.com/forums/330519-team-services/suggestions/8468566-vso-build-vnext-share-build-templates-between-pro
Is it possible to modify a web.config file in one of my projects during a Team Foundation Server build? Inside of my web.config file I have two setting keys: VersionNumber and BuildNumber.
Is it possible to change the value of BuildNumber based on the ID of the build in TFS?
Since you're using TFS 2013 you have an easier option than the old way of modifying the workflow - Use PowerShell.
If you're using the build template TfvcTemplate.12.xaml (which is the new default in TFS 2013), then you have some extra build definition parameters you can set to specify Powershell scripts to run. This way you just write a little bit of powershell code that gets the TFS Build Number (from an environment variable), then finds your web.config file(s) and changes them.
There is a sample script published in the TFS Community Build Extensions project that will do something very similar that you could modify. It finds all AssemblyInfo.cs files, then uses RegEx to modify them to update the build number based on the TFS Build number.
See the sample PS script here: https://tfsbuildextensions.codeplex.com/SourceControl/latest#Scripts/ApplyVersionToAssemblies.ps1
See some docs on how to modify the build to run PowerShell here: http://msdn.microsoft.com/en-us/library/dn376353.aspx
The answer is yes, though it's non-trivial. I've done this in the past using two methods.
Method 1: Use CodeActivities and alter the TFS Build workflow XAML file to include the new CodeActivity as a workflow step.
Here's an article on creating custom workflows with custom code activities (it's a little dated but still relevant):
http://blogs.msdn.com/b/jimlamb/archive/2010/02/12/how-to-create-a-custom-workflow-activity-for-tfs-build-2010.aspx
Basically, you create a new object that inherits from CodeActivity, create properties for your inputs (BuildNumber,VersionNumber, TargetFile), perform your actions on the TargetFile and save it. Then you wire up this new DLL with your activity to the TFS Workflow XAML, injecting your activity in the desired build step (post-build & pre-package in your case I bet to ensure xml transforms are applied).
Method 2:
Tag the desired properties onto the MSBuild invocation inside the TFS XAML file so they are passed in to MSBuild and available for your to use as $(BuildNumber) and $(VersionNumber). Then you can use MSBuild tasks to inject the properties into the file at the right time.
Is there a way that I can make a build definition for TFS2012 that will include all projects in a given folder ($\AllProjects for example)? I would like such a feature so that each time a new project was added anywhere in the child folders I don't have to manually update the build definition. Is this possible?
I think this is not possible, but you can create one solution just for this purpose (something like DeployProjects.sln), with all projects that you want to build. For each new project, you will add it to this solution.
If you don't mind customizing the workflow you can do this.
Use the FindMatchingFiles activity to find all csproj files, then loop through them and use the MSBuild activity to build each one.
Although, I would stick with Rafael's advice and just create a sln specifically for TFS Build that contains all projects you want to build.
I'm currently working on creating a build template for TFS2010 builds. However, I notice that I'm currently 'spamming' the source control with every change I make to the template (and lots more for all the fixes for those changes).
I wonder what the easiest way is to test the build templates I'm creating?
Is there a way to change the template file and custom activity dlls that doesn't involve checking them in?
I currently have a build controller and agent running on my developer machine, which I'm using to test the template (test = start a build and hope for less errors than last time).
Why is 'spamming' a problem? Anyway, I have a separate Team Project for doing this kind of work, that way I can check in to my hearts content without affecting the developers who need to have a stable build. once I've done my testing I check the template in to the team project(s) used by the developers.
I want to test my builds against the teams latest code-base without having to branch it over to a trial project.
Instead, I do the following:
Create a separate build definition called 'Infrastructure'
clone a production definition
Set the trigger on the Infrastructure build definition to manual.
Set the Infrastructure definitions permissions to allow only [Project]\Build group members to have full control of it.
keeps the notification of broken builds away from the bulk of the team).
Create a separate build process template, called 'Infrastructure.xaml'.
Point the Infrastructure build definition at the Infrastructure process template.
Now when I want to iterate on a new build feature for the team:
Check out the build process template I want to update, and lock it.
Copy the build process template I want to update overtop of the Infrastructure.xaml.
Add my build feature to the Infrastructure.xaml file, and check that in.
Use the Infrastructure build definition to test my changes.
Iterate over 3-4 until I get it right.
Complete the feature and have my changes verified by another Infrastructure team member.
Copy Infrastructure.xaml over the build process template I locked in (1) and check it in.
This still results in 'spam' in the TFS source control, but it keeps the build definition iteration out of the eyes of the team. My build process templates are located out of the main source tree (under the Build Process Templates folder, or in the branches themselves under a 'Core/Build' folder where no-one else on the team is typically paying any attention) so that the team is largely unaffected by it.
#d3r3kk: Why not just branch the template and merge changes back when ready instead of creating copies? That way you can preserve source history in a cleaner way as well.
Ideally, there should be a way to have a build process template that is in progress by having it on your local file system and pointing the build definition to it temporarily. Not sure if something like this exists in later versions of VS/TFS. I haven't seen it available via the UI anyway.
In the TFS 2010 build definition window, under “Process” there are two required items. They are “Configurations to build” and “Projects to build”. Under projects to build, it will allow me to enter something like:
$/TeamProject/Area1/Area2/*
However, this doesn’t seem to do what I expect. The build fails because it’s looking for:
$/TeamProject/Area1/Area2/Sources/*
What I am trying to achieve by this is to build all the solutions held under this area. For example, I have:
$/TeamProject/Area1/Area2/Solution1/Solution1.sln
$/TeamProject/Area1/Area2/Solution2/Solution2.sln
$/TeamProject/Area1/Area2/Solution3/Solution3.sln
There are many more solutions than this, which is why I’m looking for a way to build all solutions under the specified path recursively. Is there a way to do this in TFS 2010?
You can modify the process template. Expand it with the Matching files (I don't have the exact naming now) activity. Add a parameter that passes the information you set in the build defintion to the MachingFiles actvity. Then pass into the build solution activity instead of the argument that you enter in the build definition the files that is found by the MatchingFiles activity.
Now add a dummy solution in the build definition for the solution to build (it is not used anymore).
See the blog post series on the build customization for more information on customizing the build process template.
FWIW,
I've got: "configurations to build" blank
and under "projects to build" I've added my solutions via the ellipsis button
I would setup mappings for
$/TeamProject/Area1/Area2/Solution1/
$/TeamProject/Area1/Area2/Solution2/
$/TeamProject/Area1/Area2/Solution3/
Then in the build definitions enter the three projects to build
$/TeamProject/Area1/Area2/Solution1/Solution1.sln
$/TeamProject/Area1/Area2/Solution2/Solution2.sln
$/TeamProject/Area1/Area2/Solution3/Solution3.sln
You can leave the configurations to build as blank, or if you want to do a certain build you can set it to (for example) something like Debug|Mixed Platforms (check your Configuration Manager... for the solutions you are building to see what is valid)
Alternatively, you can just map the following (depending on how much you have in this folder, if you have Solutions 4+ that you don't want to trigger builds on, don't do it at this level)
$/TeamProject/Area1/Area2
And have one solution which contains the Solution1, Solution2 and Solution3, and build that instead.
By default building your Solution1 which is mapped to
$/TeamProject/Area1/Area2
On a build agent with a working directory that is going to looks something like:
$(SystemDrive)\Builds\$(BuildAgentId)\$(BuildDefinitionPath)
You'll end up with it being build under
C:\Builds\1\Solution1\Binaries
C:\Builds\1\Solution1\Sources
C:\Builds\1\Solution1\TestResults
Which is why you want to make sure that your OutDir's etc are all correct and not hard coded!
If you have a look while building, you'll see the build agent populating the Sources folder, and it should (if configured correctly) put all outputs into the Binaries folder (and then copy them to the Drop Folder configured under Build Defaults in TFS.