I've stuck with a Flurry: I add Flurry (Analytics only) to my swift project according this guide:
https://developer.yahoo.com/flurry/docs/integrateflurry/ios-manual/
After all steps done it throws error:
Has anyone encountered a similar one?
It's look like library not found.
Check Link Library With Libraries on Build Phases in Xcode.
Read documentation about Import Flurry Libraries:
https://developer.yahoo.com/flurry/docs/integrateflurry/ios-manual/?guccounter=1#import-flurry-libraries
I integrated Flurry it works perfectly. You are making mistake here,you are opening project using this projectname.xcodeproj rather than this file projectname.xcworkspace . After install pod you must open project using this projectname.xcworkspace
For your reference i updated sample project please take a look if you could not get it. Sample Project
Related
Xcode version 8.2.1
I can't run my project made in react native (Version 0.41.2). It's always popping me the same error:
Here's a
Screenshot
I've already tried this: onesignal/onesignal.h file not found
https://github.com/geektimecoil/react-native-onesignal/issues/127
I'm trying to add push notifications with onesignal on IOS, hope you can tell me what's the issue here.
try to change #import "RCTOneSignal.h" with #import <RCTOneSignal.h>
Please add the following to your target Header Search Paths under Build Settings on your XCode workspace:
$(SRCROOT)/../node_modules/react-native-onesignal/ios/RCTOneSignal
also make sure libRCTOneSignal.a present in Link library with banary if not drag it from RCTonesignal.xcodeproj
you can take reference from below link
https://facebook.github.io/react-native/docs/linking-libraries-ios.html#manual-linking
I am getting this error:
ERROR: GPGSAppController.mm GIDSignIn.h File not found error
I am using Google Play Game Service plugin for Unity for leaderboard and Achievements, and every thing is working fine in android but when I build to IOS and try to run my project to an iOS device I keep getting this error and I couldn't find a solution to it for hours now.
I tried to deleted everything related to Google Play service (After creating a back up of course) and the app installed and worked ok, except it was a bit laggy but that is a another issue. So I'm sure the problem comes from Google Play Service, but I have no clue how to fix it. Again I'm new to Xcode and iOS development in general and even Mac.
I also get this message after building the project in Unity:
TO FINISH CONFIGURING THE EXPORTED XCODE PROJECT
Add these frameworks:
AddressBook.framework
AssetsLibrary.framework
CoreData.framework
CoreTelephony.framework
CoreText.framework
Security.framework
libc++.dylib
libz.dylib
Add the following bundles and frameworks from the Google Plus
and the Google Play Games C++ SDKs. These can be downloaded from
https://developers.google.com/games/services.
GoogleOpenSource.framework
GoogleSignId.bundle
GoogleSignId.framework
gpg.bundle
gpg.framework
Note: Make sure the bundles are copied to application. This can be
verified under Build Phases/Copy Bundle Resources.
Add the '-ObjC' linker flag. To do this, select the top-level project
object, select the 'Unity-iPhone' build target, then go to the
Build Settings tab. Search for Other Linker Flags and add
the '-ObjC' flag to that list.
** Note: To run in the simulator, use Unity 4.6.8 or greater.
ios_instructions on plugin repository
But I have no idea how to do any thing above as am not familiar with iOS development. Any help is appreciated.
#aimozs answer was right for indicating where to add required files, a few google search gave me the answers;
From instructions (didn't work for me, scroll down)
AddressBook.framework
AssetsLibrary.framework
CoreData.framework
CoreTelephony.framework
CoreText.framework
Security.framework
libc++.dylib
libz.dylib
These can all be located directly when linking frameworks. (In my case, libc++.dylib and libz.dylib were already linked, and I couldn't find them somehow, but regenerating your xcode project should add these two again.
GoogleOpenSource.framework
I've found it here:
https://developers.google.com/+/mobile/ios/getting-started#step_1_creating_the_console_name_project
GoogleSignId.bundle
GoogleSignId.framework
Found them in:
https://developers.google.com/identity/sign-in/ios/sdk/
(I grabbed latest version Google Sign-In SDK 3.0.0)
gpg.bundle
gpg.framework
I found them here:
https://developers.google.com/games/services/downloads/sdks
(Grabbed Play Games C++ SDK Version 2.1)
Also, the following part of the message seemed important:
Make sure the bundles are copied to application
I tried to copy bundle files to root of the project, but I still get the same error.
Solution: CocoaPods and the podfile!
I saw the PodFile in xcode project directory!.
Here you go; make sure you followed these steps:
https://github.com/playgameservices/play-games-plugin-for-unity#ios-setup
Then see https://cocoapods.org/
sudo gem install cocoapods
pod repo update
pod install
open Unity-iPhone.xcworkspace
Way better than manually copying files everywhere! ;)
Note: I also had to disable bitecode because I was having a linker error concerning GoogleOpenSource:
You must rebuild it with bitcode enabled (Xcode setting ENABLE_BITCODE)
It doesn't seem to be compiled with bitcode enabled, solution in here: how to ENABLE_BITCODE in xcode 7?
Build, enjoy and focus on making awesome games!
Linked questions
There's also a small discussion here:
http://forum.unity3d.com/threads/googleplus-googleplus-h-file-not-found-gpgsappcontroller-mm-xcode.294398/
A similar issue on UnityAnswers:
http://answers.unity3d.com/questions/1098655/gpgsappcontrollermm-gidsigninh-file-not-found-erro.html
Im going through that aswell, and for #1 it has to be done in xcode, here's a screenshot of how to add those libs
And that is for #3
Hope that helps :) and I'll get back to you about #2 when I've found out about it ;)
I don't know what Happens to the code or google.
I just Downloaded the Sample App for Google Analytics for Google.
I downloaded it via pod using:
pod try Google
and chooses the option for Analytics.
After downloading when I build the project I am getting Linker Error.
Fully Stuck Tried All The way available in SO.
Removed -ObjC Flag
Removed -force-load Flag
Changed Load Common Section from Yes to NO
But none of the way help me Out. What is the issue with it.
Here is the Screen shot of the Error:
Here is the Following reason of this ERROR :
*Note - Integrated GooGle Analytic without CocoaPods.
If latest GA(Google Analytics) sdk is using then better to upgrade to Xcode 7 otherwise it will give you duplicate error (even if configured properly)
Running with Xcode 6.2 or < Xcode 7 then better to download September (August) Release Sdk.
Go with Xcode and select GA folder and right click - choose show in Finder then all files should be there . If yes then check is there two different copy exists in other folder .
Thanks
It basically says that there are functions duplications in the project...
Make sure the following:
The project does not have #import for .m files by mistake
In the projects build phases there are no file names duplications
There are no initialized variables in .h files e.g "int
variableA = 5"
If none of the above works, remove in project settings Other Linker
Flags "-ObjC", that will allow to load the same functions more then
one time.
I follow all the steps in This Tutorial and/or Facebook SDK Documentation to install Facebook Login on my App, but when I run the code I get an error. although Facebook mention I can just use import (Swift) to include the framework, I try to do it the old fashion as well with Objective-C Bridge Header.
Error:
'FBSDKLoginKit/FBSDKLoginKit.h' file not found
ScreenshotAs you can see the bridge.h is being read by the compiler, but due to internal file error it will throw error.
Bridge.h In Xcode 6 you don't require bridge header file, I could just do it with import
#import <FBSDKLoginKit/FBSDKLoginKit.h>
This problem is due to Xcode 7 Beta, I have tried to do it on Xcode 6 and it worked perfectly with just an import FBSDKLoginKit. Can anyone tell me a hack around this? or if there is a way to convert my Swift 2 code back to 1.4 and work on Xcode 6.
I had the same problem.
Managed to sort the directory by adding the Facebook SDK in "Framework Search Path".
Target -> Build Settings -> Framework Search Paths -> + /Users//Documents/FacebookSDK
it works!
=]
For those using cocoapods the solution for me was actually adding FBSDKCoreKit to podfile:
pod 'FBSDKCoreKit'
pod 'FBSDKLoginKit'
The facebook documentation is incomplete, they dont mention anything about including FBSDKCoreKit pod reference.
For [login,sharekit,corekit].h file not found error , My solution was:
changing framework searchpath of RCTFBSDK (inside library of the project)
~/Documents/FacebookSDK
to
$(HOME)/Documents/FacebookSDK
I have the same issue and recognized, that my old XCode 6 projects worked with the Facebook frameworks.
So i try the following workaround and that fixed the problem. however i don't know why:
Facebook iOS SDK 4.2
Create a fresh project in XCode 6
Link the Facebook Frameworks to your project as described in the docs
Close the project and reopen it in XCode 7
The "To Swift 2 Converter" should open within the project - Convert the project to Swift 2
Run the project - in my case everything works fine.
After that i copied my "old" Swift 2 Files into the new project. The app starts without any issues.
I observed the changes by the converter, but can't recognized any change depending the Facebook frameworks.
Had the same issue, instead of updating the search path
I solved it by removing the Frameworks from the project and then adding them checking the Copy items if needed box
My header files looks this
#import <FBSDKCoreKit/FBSDKCoreKit.h>
#import <FBSDKLoginKit/FBSDKLoginKit.h>
You can simply put ~/Documents/FacebookSDK in Framework Search Paths and it will work for any user
this is a known bug: https://developers.facebook.com/bugs/362995353893156/
Check out this solution: Facebook iOS8 SDK build module error for FBSDKCoreKit
I'm trying to add the AWS SDK to my xcode project that is written in swift.
I followed these steps: http://mobile.awsblog.com/post/Tx2AA7ZHB1FK0G1/Version-2-of-the-AWS-SDK-for-iOS-Developer-Preview to create a Bridge-Header file, and add the SDK itself to my project.
The problem is that when I try to build the app I get an error now... the Bridge Header cannot be imported because one of the files in the AWS SDK (AWSModel.h) has an error. This file tries to import Mantle/Mantle.h, and the error reads "Mantle/Mantle.h file not found"
do I need to add this file to my project as well? If so, how would I go about doing that? The only frameworks I'm using are Facebook SDK, and I would like to add AWS as well.
There is a working sample app on GitHub. You should follow README and see if you can compile the app. It should help you understand how to set up the project.