Related
I am working with Docker through the Fabric8's Docker Maven Plugin.
That requires me to fully qualify the images because login happens at the beginning, so <from>mongo:5</from> is rejected by our company's registry.
So, by default, docker works with docker.io/library.
Right?
Because I did not find this anywhere on https://hub.docker.com/.
The only mention I found is here: https://docs.docker.com/registry/introduction/
Just along the way with the naming conventions documentation:
docker pull ubuntu instructs docker to pull an image named ubuntu from the official Docker Hub. This is simply a shortcut for the longer docker pull docker.io/library/ubuntu command
1) Is this default registry docker.io/library/ defined anywhere?
(Similarly to what Maven has in the "Super POM" which is actually available in the distribution archives MAVEN_HOME/lib/maven-model-builder-3.2.3.jar and available through e.g. mvn help:effective-pom.)
2) My scripts also work with just docker.io/mongo:5. Why is that? What is the relation between docker.io/ and docker.io/library/?
By default, if I issue command:
sudo docker pull ruby:2.2.1
it will pull from the docker.io offical site by default.
Pulling repository docker.io/library/ruby
How do I change it to my private registry. That means if I issue
sudo docker pull ruby:2.2.1
it will pull from my own private registry, the output is something like:
Pulling repository my_private.registry:port/library/ruby
UPDATE: Following your comment, it is not currently possible to change the default registry, see this issue for more info.
You should be able to do this, substituting the host and port to your own:
docker pull localhost:5000/registry-demo
If the server is remote/has auth you may need to log into the server with:
docker login https://<YOUR-DOMAIN>:8080
Then running:
docker pull <YOUR-DOMAIN>:8080/test-image
There is the use case of a mirror of Docker Hub (such as Artifactory or a custom one), which I haven't seen mentioned here. This is one of the most valid cases where changing the default registry is needed.
Luckily, Docker (at least version 19.03.3) allows you to set a mirror (tested in Docker CE). I don't know if this will work with additional images pushed to that mirror that aren't on Docker Hub, but I do know it will use the mirror instead. Docker documentation: https://docs.docker.com/registry/recipes/mirror/#configure-the-docker-daemon.
Essentially, you need to add "registry-mirrors": [] to the /etc/docker/daemon.json configuration file. So if you have a mirror hosted at https://my-docker-repo.my.company.com, your /etc/docker/daemon.json should contain:
{
"registry-mirrors": ["https://my-docker-repo-mirror.my.company.com"]
}
Afterwards, restart the Docker daemon. Now if you do a docker pull postgres:12, Docker should fetch the image from the mirror instead of directly from Docker Hub. This is much better than prepending all images with my-docker-repo.my.company.com
It turns out this is actually possible, but not using the genuine Docker CE or EE version.
You can either use Red Hat's fork of docker with the '--add-registry' flag or you can build docker from source yourself with registry/config.go modified to use your own hard-coded default registry namespace/index.
The short answer to this is you don't, or at least you really shouldn't.
Yes, there are some container runtimes that allow you to change the default namespace, specifically those from RedHat. However, RedHat now regrets this functionality and discourages customers from using it. Docker has also refused to support this.
The reason this is so problematic is because is results in an ambiguous namespace of images. The same command run on two different machines could pull different images depending on what registry they are configured to use. Since compose files, helm templates, and other ways of running containers are shared between machines, this actually introduces a security vulnerability.
An attacker could squat on well known image names in registries other than Docker Hub with the hopes that a user may change their default configuration and accidentally run their image instead of the one from Hub. It would be trivial to create a fork of a tool like Jenkins, push the image to other registries, but with some code that sends all the credentials loaded into Jenkins out to an attacker server. We've even seen this causing security vulnerability reports this year for other package managers like PyPI, NPM, and RubyGems.
Instead, the direction of container runtimes like containerd is to make all image names fully qualified, removing the Docker Hub automatic expansion (tooling on top of containerd like Docker still apply the default expansion, so I doubt this is going away any time soon, if ever).
Docker does allow you to define registry mirrors for Docker Hub that it will query first before querying Hub, however this assumes everything is still within the same namespace and the mirror is just a copy of upstream images, not a different namespace of images. The TL;DR on how to set that up is the following in the /etc/docker/daemon.json and then systemctl reload docker:
{
"registry-mirrors": ["https://<my-docker-mirror-host>"]
}
For most, this is a non-issue (this issue to me is the docker engine doesn't have an option to mirror non-Hub registries). The image name is defined in a configuration file, or a script, and so typing it once in that file is easy enough. And with tooling like compose files and Helm templates, the registry can be turned into a variable to allow organizations to explicitly pull images for their deploy from a configurable registry name.
if you are using the fedora distro, you can change the file
/etc/containers/registries.conf
Adding domain docker.io
Docker official position is explained in issue #11815 :
Issue 11815: Allow to specify default registries used in pull command
Resolution:
Like pointed out earlier (#11815), this would fragment the namespace, and hurt the community pretty badly, making dockerfiles no longer portable.
[the Maintainer] will close this for this reason.
Red Hat had a specific implementation that allowed it (see anwser, but it was refused by Docker upstream projet). It relied on --add-registry argument, which was set in /etc/containers/registries.conf on RHEL/CentOS 7.
EDIT:
Actually, Docker supports registry mirrors (also known as "Run a Registry as a pull-through cache").
https://docs.docker.com/registry/recipes/mirror/#configure-the-docker-daemon
It seems it won't be supported due to the fragmentation it would create within the community (i.e. two users would get different images pulling ubuntu:latest). You simply have to add the host in front of the image name. See this github issue to join the discussion.
(Note, this is not intended as an opinionated comment, just a very short summary of the discussion that can be followed in the mentioned github issue.)
I tried to add the following options in the /etc/docker/daemon.json.
(I used CentOS7)
"add-registry": ["192.168.100.100:5001"],
"block-registry": ["docker.io"],
after that, restarted docker daemon.
And it's working without docker.io.
I hope this someone will be helpful.
Earlier this could be achieved using DOCKER_OPTS in the /etc/default/docker config file which worked on Ubuntu 14:04 and had some issues on Ubuntu 15:04. Not sure if this has been fixed.
The below line needs to go into the file /etc/default/docker on the host which runs the docker daemon. The change points to the private registry is installed in your local network. Note: you would require to restart the docker service followed with this change.
DOCKER_OPTS="--insecure-registry <priv registry hostname/ip>:<port>"
I'm adding up to the original answer given by Guy which is still valid today (soon 2020).
Overriding the default docker registry, like you would do with maven, is actually not a good practice.
When using maven, you pull artifacts from Maven Central Repository through your local repository management system that will act as a proxy. These artifacts are plain, raw libs (jars) and it is quite unlikely that you will push jars with the same name.
On the other hand, docker images are fully operational, runnable, environments, and it makes total sens to pull an image from the Docker Hub, modify it and push this image in your local registry management system with the same name, because it is exactly what its name says it is, just in your enterprise context. In this case, the only distinction between the two images would precisely be its path!!
Therefore the need to set the following rule: the prefix of an image indicates its origin; by default if an image does not have a prefix, it is pulled from Docker Hub.
Didn't see the answer for MacOS, so want to add here:
2 Method as below:
Option 1 (Through Docker Desktop GUI):
Preference -> Docker Engine -> Edit file -> Apply and Restart
Option 2:
Directly edit the file ~/.docker/daemon.json
Haven't tried, but maybe hijacking the DNS resolution process by adding a line in /etc/hosts for hub.docker.com or something similar (docker.io?) could work?
By default, if I issue command:
sudo docker pull ruby:2.2.1
it will pull from the docker.io offical site by default.
Pulling repository docker.io/library/ruby
How do I change it to my private registry. That means if I issue
sudo docker pull ruby:2.2.1
it will pull from my own private registry, the output is something like:
Pulling repository my_private.registry:port/library/ruby
UPDATE: Following your comment, it is not currently possible to change the default registry, see this issue for more info.
You should be able to do this, substituting the host and port to your own:
docker pull localhost:5000/registry-demo
If the server is remote/has auth you may need to log into the server with:
docker login https://<YOUR-DOMAIN>:8080
Then running:
docker pull <YOUR-DOMAIN>:8080/test-image
There is the use case of a mirror of Docker Hub (such as Artifactory or a custom one), which I haven't seen mentioned here. This is one of the most valid cases where changing the default registry is needed.
Luckily, Docker (at least version 19.03.3) allows you to set a mirror (tested in Docker CE). I don't know if this will work with additional images pushed to that mirror that aren't on Docker Hub, but I do know it will use the mirror instead. Docker documentation: https://docs.docker.com/registry/recipes/mirror/#configure-the-docker-daemon.
Essentially, you need to add "registry-mirrors": [] to the /etc/docker/daemon.json configuration file. So if you have a mirror hosted at https://my-docker-repo.my.company.com, your /etc/docker/daemon.json should contain:
{
"registry-mirrors": ["https://my-docker-repo-mirror.my.company.com"]
}
Afterwards, restart the Docker daemon. Now if you do a docker pull postgres:12, Docker should fetch the image from the mirror instead of directly from Docker Hub. This is much better than prepending all images with my-docker-repo.my.company.com
It turns out this is actually possible, but not using the genuine Docker CE or EE version.
You can either use Red Hat's fork of docker with the '--add-registry' flag or you can build docker from source yourself with registry/config.go modified to use your own hard-coded default registry namespace/index.
The short answer to this is you don't, or at least you really shouldn't.
Yes, there are some container runtimes that allow you to change the default namespace, specifically those from RedHat. However, RedHat now regrets this functionality and discourages customers from using it. Docker has also refused to support this.
The reason this is so problematic is because is results in an ambiguous namespace of images. The same command run on two different machines could pull different images depending on what registry they are configured to use. Since compose files, helm templates, and other ways of running containers are shared between machines, this actually introduces a security vulnerability.
An attacker could squat on well known image names in registries other than Docker Hub with the hopes that a user may change their default configuration and accidentally run their image instead of the one from Hub. It would be trivial to create a fork of a tool like Jenkins, push the image to other registries, but with some code that sends all the credentials loaded into Jenkins out to an attacker server. We've even seen this causing security vulnerability reports this year for other package managers like PyPI, NPM, and RubyGems.
Instead, the direction of container runtimes like containerd is to make all image names fully qualified, removing the Docker Hub automatic expansion (tooling on top of containerd like Docker still apply the default expansion, so I doubt this is going away any time soon, if ever).
Docker does allow you to define registry mirrors for Docker Hub that it will query first before querying Hub, however this assumes everything is still within the same namespace and the mirror is just a copy of upstream images, not a different namespace of images. The TL;DR on how to set that up is the following in the /etc/docker/daemon.json and then systemctl reload docker:
{
"registry-mirrors": ["https://<my-docker-mirror-host>"]
}
For most, this is a non-issue (this issue to me is the docker engine doesn't have an option to mirror non-Hub registries). The image name is defined in a configuration file, or a script, and so typing it once in that file is easy enough. And with tooling like compose files and Helm templates, the registry can be turned into a variable to allow organizations to explicitly pull images for their deploy from a configurable registry name.
if you are using the fedora distro, you can change the file
/etc/containers/registries.conf
Adding domain docker.io
Docker official position is explained in issue #11815 :
Issue 11815: Allow to specify default registries used in pull command
Resolution:
Like pointed out earlier (#11815), this would fragment the namespace, and hurt the community pretty badly, making dockerfiles no longer portable.
[the Maintainer] will close this for this reason.
Red Hat had a specific implementation that allowed it (see anwser, but it was refused by Docker upstream projet). It relied on --add-registry argument, which was set in /etc/containers/registries.conf on RHEL/CentOS 7.
EDIT:
Actually, Docker supports registry mirrors (also known as "Run a Registry as a pull-through cache").
https://docs.docker.com/registry/recipes/mirror/#configure-the-docker-daemon
It seems it won't be supported due to the fragmentation it would create within the community (i.e. two users would get different images pulling ubuntu:latest). You simply have to add the host in front of the image name. See this github issue to join the discussion.
(Note, this is not intended as an opinionated comment, just a very short summary of the discussion that can be followed in the mentioned github issue.)
I tried to add the following options in the /etc/docker/daemon.json.
(I used CentOS7)
"add-registry": ["192.168.100.100:5001"],
"block-registry": ["docker.io"],
after that, restarted docker daemon.
And it's working without docker.io.
I hope this someone will be helpful.
Earlier this could be achieved using DOCKER_OPTS in the /etc/default/docker config file which worked on Ubuntu 14:04 and had some issues on Ubuntu 15:04. Not sure if this has been fixed.
The below line needs to go into the file /etc/default/docker on the host which runs the docker daemon. The change points to the private registry is installed in your local network. Note: you would require to restart the docker service followed with this change.
DOCKER_OPTS="--insecure-registry <priv registry hostname/ip>:<port>"
I'm adding up to the original answer given by Guy which is still valid today (soon 2020).
Overriding the default docker registry, like you would do with maven, is actually not a good practice.
When using maven, you pull artifacts from Maven Central Repository through your local repository management system that will act as a proxy. These artifacts are plain, raw libs (jars) and it is quite unlikely that you will push jars with the same name.
On the other hand, docker images are fully operational, runnable, environments, and it makes total sens to pull an image from the Docker Hub, modify it and push this image in your local registry management system with the same name, because it is exactly what its name says it is, just in your enterprise context. In this case, the only distinction between the two images would precisely be its path!!
Therefore the need to set the following rule: the prefix of an image indicates its origin; by default if an image does not have a prefix, it is pulled from Docker Hub.
Didn't see the answer for MacOS, so want to add here:
2 Method as below:
Option 1 (Through Docker Desktop GUI):
Preference -> Docker Engine -> Edit file -> Apply and Restart
Option 2:
Directly edit the file ~/.docker/daemon.json
Haven't tried, but maybe hijacking the DNS resolution process by adding a line in /etc/hosts for hub.docker.com or something similar (docker.io?) could work?
By default, if I issue command:
sudo docker pull ruby:2.2.1
it will pull from the docker.io offical site by default.
Pulling repository docker.io/library/ruby
How do I change it to my private registry. That means if I issue
sudo docker pull ruby:2.2.1
it will pull from my own private registry, the output is something like:
Pulling repository my_private.registry:port/library/ruby
UPDATE: Following your comment, it is not currently possible to change the default registry, see this issue for more info.
You should be able to do this, substituting the host and port to your own:
docker pull localhost:5000/registry-demo
If the server is remote/has auth you may need to log into the server with:
docker login https://<YOUR-DOMAIN>:8080
Then running:
docker pull <YOUR-DOMAIN>:8080/test-image
There is the use case of a mirror of Docker Hub (such as Artifactory or a custom one), which I haven't seen mentioned here. This is one of the most valid cases where changing the default registry is needed.
Luckily, Docker (at least version 19.03.3) allows you to set a mirror (tested in Docker CE). I don't know if this will work with additional images pushed to that mirror that aren't on Docker Hub, but I do know it will use the mirror instead. Docker documentation: https://docs.docker.com/registry/recipes/mirror/#configure-the-docker-daemon.
Essentially, you need to add "registry-mirrors": [] to the /etc/docker/daemon.json configuration file. So if you have a mirror hosted at https://my-docker-repo.my.company.com, your /etc/docker/daemon.json should contain:
{
"registry-mirrors": ["https://my-docker-repo-mirror.my.company.com"]
}
Afterwards, restart the Docker daemon. Now if you do a docker pull postgres:12, Docker should fetch the image from the mirror instead of directly from Docker Hub. This is much better than prepending all images with my-docker-repo.my.company.com
It turns out this is actually possible, but not using the genuine Docker CE or EE version.
You can either use Red Hat's fork of docker with the '--add-registry' flag or you can build docker from source yourself with registry/config.go modified to use your own hard-coded default registry namespace/index.
The short answer to this is you don't, or at least you really shouldn't.
Yes, there are some container runtimes that allow you to change the default namespace, specifically those from RedHat. However, RedHat now regrets this functionality and discourages customers from using it. Docker has also refused to support this.
The reason this is so problematic is because is results in an ambiguous namespace of images. The same command run on two different machines could pull different images depending on what registry they are configured to use. Since compose files, helm templates, and other ways of running containers are shared between machines, this actually introduces a security vulnerability.
An attacker could squat on well known image names in registries other than Docker Hub with the hopes that a user may change their default configuration and accidentally run their image instead of the one from Hub. It would be trivial to create a fork of a tool like Jenkins, push the image to other registries, but with some code that sends all the credentials loaded into Jenkins out to an attacker server. We've even seen this causing security vulnerability reports this year for other package managers like PyPI, NPM, and RubyGems.
Instead, the direction of container runtimes like containerd is to make all image names fully qualified, removing the Docker Hub automatic expansion (tooling on top of containerd like Docker still apply the default expansion, so I doubt this is going away any time soon, if ever).
Docker does allow you to define registry mirrors for Docker Hub that it will query first before querying Hub, however this assumes everything is still within the same namespace and the mirror is just a copy of upstream images, not a different namespace of images. The TL;DR on how to set that up is the following in the /etc/docker/daemon.json and then systemctl reload docker:
{
"registry-mirrors": ["https://<my-docker-mirror-host>"]
}
For most, this is a non-issue (this issue to me is the docker engine doesn't have an option to mirror non-Hub registries). The image name is defined in a configuration file, or a script, and so typing it once in that file is easy enough. And with tooling like compose files and Helm templates, the registry can be turned into a variable to allow organizations to explicitly pull images for their deploy from a configurable registry name.
if you are using the fedora distro, you can change the file
/etc/containers/registries.conf
Adding domain docker.io
Docker official position is explained in issue #11815 :
Issue 11815: Allow to specify default registries used in pull command
Resolution:
Like pointed out earlier (#11815), this would fragment the namespace, and hurt the community pretty badly, making dockerfiles no longer portable.
[the Maintainer] will close this for this reason.
Red Hat had a specific implementation that allowed it (see anwser, but it was refused by Docker upstream projet). It relied on --add-registry argument, which was set in /etc/containers/registries.conf on RHEL/CentOS 7.
EDIT:
Actually, Docker supports registry mirrors (also known as "Run a Registry as a pull-through cache").
https://docs.docker.com/registry/recipes/mirror/#configure-the-docker-daemon
It seems it won't be supported due to the fragmentation it would create within the community (i.e. two users would get different images pulling ubuntu:latest). You simply have to add the host in front of the image name. See this github issue to join the discussion.
(Note, this is not intended as an opinionated comment, just a very short summary of the discussion that can be followed in the mentioned github issue.)
I tried to add the following options in the /etc/docker/daemon.json.
(I used CentOS7)
"add-registry": ["192.168.100.100:5001"],
"block-registry": ["docker.io"],
after that, restarted docker daemon.
And it's working without docker.io.
I hope this someone will be helpful.
Earlier this could be achieved using DOCKER_OPTS in the /etc/default/docker config file which worked on Ubuntu 14:04 and had some issues on Ubuntu 15:04. Not sure if this has been fixed.
The below line needs to go into the file /etc/default/docker on the host which runs the docker daemon. The change points to the private registry is installed in your local network. Note: you would require to restart the docker service followed with this change.
DOCKER_OPTS="--insecure-registry <priv registry hostname/ip>:<port>"
I'm adding up to the original answer given by Guy which is still valid today (soon 2020).
Overriding the default docker registry, like you would do with maven, is actually not a good practice.
When using maven, you pull artifacts from Maven Central Repository through your local repository management system that will act as a proxy. These artifacts are plain, raw libs (jars) and it is quite unlikely that you will push jars with the same name.
On the other hand, docker images are fully operational, runnable, environments, and it makes total sens to pull an image from the Docker Hub, modify it and push this image in your local registry management system with the same name, because it is exactly what its name says it is, just in your enterprise context. In this case, the only distinction between the two images would precisely be its path!!
Therefore the need to set the following rule: the prefix of an image indicates its origin; by default if an image does not have a prefix, it is pulled from Docker Hub.
Didn't see the answer for MacOS, so want to add here:
2 Method as below:
Option 1 (Through Docker Desktop GUI):
Preference -> Docker Engine -> Edit file -> Apply and Restart
Option 2:
Directly edit the file ~/.docker/daemon.json
Haven't tried, but maybe hijacking the DNS resolution process by adding a line in /etc/hosts for hub.docker.com or something similar (docker.io?) could work?
I'm trying to download a tagged docker image
docker pull clkao/postgres-plv8:10-2
and, in a compose file,
postgres:
image: clkao/postgres-plv8:10-2
But receive a manifest not found exception.
Unless I'm mistaken, that tag exists in Docker Hub, however I notice that it doesn't appear on the tags list.
Am I doing something wrong? Or is this perhaps an issue with Docker Hub or the way that repo has been set up?
If it isn't 'my fault', what's a recommendation to move forward? Create my own Dockerfile perhaps?
You might also try
docker pull -a <image>.
The -a will pull all versions of that image, which at least lets you know what is there.
(This is less useful if you really need a specific version, but helped me when I tried to pull an image that for some reason did not have a 'latest' tag.)
Edit: This is actually a really bad idea, since it will pull down the entire history, which for many repositories could be many GB. Better to go look at the repository site and see what tag you want. Note to self: don't post answers when you are tired. :-(
You get the error message because there exist no tag with "10-2".
You can try to figure out why and contact the repository owner or you can try to build your own one.
I just got over this "manifest for / not found: manifest unknown: The named manifest is not known to the registry."
Using
docker login <repo>
Check the docker's image also not only that the tag exists, I was trying to run Flyway version 5.0.1 for an image flyway/flyway which version did not exist, it existed only in version flyway/flyway:latest it seems, whereas 5.0.1 existed and I pulled it but in/from a different repository name, with repository name boxfuse/flyway.
for the error message 'docker manifest unknown'
When you use docker pull, without a tag, it will default to the tag :latest. Make sure that when we are building a image add tag latest or we can access the image by the tag name after image name with colon
I think you are trying to tag your image as v8.10.2. Make sure while tagging image locally you use same tag which you want to pull in future. So steps will be like below:
docker build -t clkao/postgres-pl:v8.10.2 .
docker push clkao/postgres-pl:v8.10.2
docker pull clkao/postgres-pl:v8.10.2
If this is from Git via docker.pkg.github.com then you need to switch to use ghcr.io. The former is deprecated and does not support the manifest endpoint so some docker clients, when they attempt to download various resources, fail with this error message. If you instead publish your image to ghcr (Github Container Repository), the docker image pulling process should complete successfully.
cd <dir with Dockerfile in it>
docker build -f Dockerfile -t ghcr.io/<org_id>/<project_id>:<version> .
docker push ghcr.io/<org_id>/<project_id>:<version>
More info here: https://docs.github.com/en/packages/working-with-a-github-packages-registry/migrating-to-the-container-registry-from-the-docker-registry
Note: The Container registry is currently in public beta and subject
to change. During the beta, storage and bandwidth are free. To use the
Container registry, you must enable the feature preview. For more
information, see "Introduction to GitHub Packages" and "Enabling
improved container support with the Container registry."