Suddenly it stops building application in device. In simulator its working but when I connect the device and try to run it in device it gives me an error:
Could not build module UIKit
I tries a lot but couldn't solve it.
A full clean + deleting the derived data worked for me.
Be sure to fix any code that may be broken because UIKit cannot be installed, before the clean and build.
So, for example, if you are trying to reference UICollectionViewController, and need UIKit to reference it, comment out the code that is using UICollectionViewController, comment out the import for UIKit.
Then clean, build. Now uncomment import UIKIt, build. NOW uncomment UICollectionViewController code, build again.
Please don't make the same mistake like I did. In my case, I accidentally typed some words into Foundation framework file.
Something that might help would be to set the Derived Data location to "Relative" in XCode preferences, then Clean & Build
For some reason your UIKit.framework is corrupted, either copy a working UIKit.framework from somewhere else into
/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS.sdk/System/Library/Frameworks
Or reinstall Xcode the fix the issue.
I accidentally edited the Foundation framework file
so UIKit.framework got corrupted. The only solution is recover the original.
You have two ways to achieve the same:
Just reinstall Xcode. OR
copy the Framework from another machine with the same XCode version and paste into yours.
Location:
/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS.sdk/System/Library/Frameworks
If you have two Xcode then uninstall both and again install Xcode. It worked for me.
If cleaning the project and deleting the 'derived data' doesn't work,
try to change the 'Deployment target' (at 'General' tab) from 7.0 to 7.1
Check whether the appropriate target is selected or not from the "active scheme selector". Selecting "Generic iOS Device" solved my problem.
Click to select simulator
Select "Generic iOS Device":
Make sure none of the files are edited in the UIKit framework located inside Xcode.
Cleaning Derived data worked for me
Check the tool chains installed and select the right xcode tool chain. In my case i changed it from Swift 4.0 to xcode 9.2 and it worked.
In my case, after cleaning the project, only restarting my Mac helps.
Cleaning the project and restart xCode worked for me.
I am also facing this issue for very long time and after trying all the suggestions given in the different portals, i came to know that the issue is with the device you want to run the application. Device have latest iOS and your Xcode is not supporting that iOS.
For example you have Xcode 7.2 and want to run the application on device which have iOS 9.2.1. So you only need to update your Xcode.
And one more thing Base Sdk in Build Settings is always greater or equal to the software version number on your development device.
Already tried all the solutions above. I still could not solve my problem. So I uninstall the Xcode and reinstall it. It worked magically.hope this helps.
Suppose you have changed or deleted anything in the UIKit framework, then shows this error.
If you are able to find that class or .h file to be changed or deleted, then replace that whole file content in that .h file from other system's Xcode (confirm that should be similar Xcode version).
For example, In UIView.h file - I have deleted a method and closed and opened the Xcode. Then I couldn't reverted that code.
I tried with delete derived data,delete application from project list but when i delete xcode and install new one its working so its best way just delete xcode and install new xcode.
This error happened to me when I accidentally modified the uikit framework. Removing and re-adding the uikit framework in link binary with library, cleaning derived data and restarting xcode didn't work. I don't want to uninstall my xcode so I tried to copy codes of the class that I might have modified from other pc with xcode that works fine and paste it to mine. It worked!
If your project builds for another target (e.g. it builds for simulator and NOT your device), then it's confirmed you accidentally edited one of the header files of the frameworks for that target. The affected framework is the one you are receiving compiling errors for.
It worked for me after remove all folders in DerivedData folder.
My Issue causing this same error was due to working in a workspace created by coco pods, somehow the link to the UiKit Framework had been lost from the original project.
To solve this i just reopened the xCode project not the workspace and re added the missing UIKit framework, saved the project and closed it, re opened my workspace for the project and the annoying nag messages caused by this were fixed. Hopefully this helps someone else.
I had this issue, and I set Device on Generic iOS Device, clean project, make build. Then I switched device to my real device and run project. The error does not appear.
Cleaning some unnecessary Xcode data using DevCleaner for Xcode app worked for me.
My error was a wrong version of command line tools - go to Preferences->Locations and change the command line tools version - quit xcode and try again.
Related
Getting this errors when i build the application
Main.storybord: Internal error. Please file a bug at bugreport.apple.com and attach "/var/folders/v5/4tnjcvds103g1y3tf1mnfv680000gn/T/IB-agent-diagnostics_2015-10-30_11-30-47_678000".
And
LaunchScreen.storyboard: Internal error. Please file a bug at bugreport.apple.com and attach all crash logs from ~/Library/Logs/DiagnosticReports.
Done all things Cleaning project, Quit Xcode Several times and also restarted the System, Still getting errors.
Any one got solution help me please ?
Try following options to clean up the build files :
cmd + shift + k
AND
cmd + option + shift + k
OR
even you can send the bug report on this link for this issue.
I had same issue,
Solution was: clearing out the DerivedData folder.
Can be found in ~/Library/Developer/Xcode/DerivedData
That worked for me.
I got the same issue when i have updated my launch screen into project.
I just do following things the issue got cleared.
1.Get the back up of your source code.
2.Delete your LaunchScreen.storyboard file.
3.Pop up will appear and it will ask re save the storyboard file or close option,press close.
4.Just Add LaunchScreen.storyboard file into your current project from your back up source code.
5.Now clean then build , issue will cleared.
cmd+shift+k
cmd+option+shift+k
All this is not work for me or for you????
Waring:You can do this
The reason is you download Simulators on the new Xcode, you must delete it!!
the path is "/Library/Developer/CoreSimulator/Profiles/Runtimes"
For example your xcode version is Xcode 8.0, Now you download Xcode 9.0, You have two xcode, you download ios 10 Simulator on the Xcode 9.0, Then Xcode 8.0 will appear the Storyboard can't run, Because, Xcode 8.0 default Simulator is ios 10, Conflicted!!!
After successfully compiling the project in Xcode 6, I am unable to run it in the simulator with the above mentioned message. I did all the possible research, tried everything and still no advances.
I am not working with swift, neither I use widgets or extensions, so please do not suggest solutions caused by these as can be seen in similar questions.
If someone found a possible cause (or solution!!) other than these, please help. Thanks
"Reset Content and Settings" from iOS Simutalor menu options and launching simulator after Quitting solved my issue.
Cleaning the build folder resolved the issue for me.
(While holding down the Alt-key: Product > Clean build folder)
I tried every other solution listed here. Well, I ported my project from Swift 1.2 to Swift 2.0. The application was stuck even after a lot debugging and launch services error 0 was reported.
solution: It happens because of framework compilation.
App target -> Build Phases -> Embed Frameworks.
So mark copy only when installing on. Clean the project and run it!
This has now been resolved. The problem was caused by ShareKit library added by CocoaPods for compatibility reasons. After removing the library and all related code, the app successfully launched in simulator. I recommend checking the system log for more details on the issue as to me it pointed me in the right direction (stating the name of conflicting library).
In case anyone has this problem in combination with cocoa pods, these steps helped me to solve this error (after few hours):
run pod cache clean
from SRC_ROOT run rm -rf Pods (optionally rm Podfile.lock)
Click on the Simulator app, click Simulator -> Reset Content and Settings...
Go into Xcode, In the Menu bar click Product -> Clean (or click Shift + Command + K).This will to clean your Xcode project.
Create a new Terminal Shell (From menu bar click Shell -> New Window)
run rm -rf ~/Library/Developer/Xcode/DerivedData/
...then try to Build & Run your project.
Note:
SRC_ROOT can be found by entering the Navigator, clicking on the project, clicking on the project again from the project and targets list, going into Build Settings, scrolling all the way to the bottom to the User-Defined Section, and the SRC_ROOT will be labeled as PODS_ROOT. Take that and copy it verbatum into the Terminal and proceed with step 2 from the list above.
Hope it helps.
I get rid from the issue by the given steps for simulator
1. Way
Reset Content and Settings of Simulator.
Clean your project by Cmd+Shift+K.
Clear your Derived Data.
The last one which is more important change your Bundle Identifier by "com.yourcompanyname.projectname" like "com.facebook.Facebook"
2. Way
You can do only be the given line, it works for me
The last one which is more important change your Bundle Identifier by "com.yourcompanyname.projectname" like "com.facebook.Facebook"
Thanks and enjoy programming.
Might be related to this issue: "This app contains an app extension with an illegal bundle identifier" issue
I had to format the bundle identifiers for my app and extension as follows:
com.company.AppName
com.company.AppName.Extension
First "Reset Content and Settings"
If you didn't fill the build number and fill it and Run.
It's solved for me.
If you change the name of the supplied class InterfaceController set by default when you start a new project. This class is referenced in the Info.plist under the key RemoteInterfacePrincipalClass. In my case, I got the error mentioned by the OP until I fixed the name of the class in there (see screenshot).
If you are here after having issues doing an integration with WatchOS 2.0, go to - ~/Library/Logs/CoreSimulator/[Device UDID]/system.log and if says something like WatchKit 2 app has frameworks; that's not allowed. then follow the link below.
http://zyafa.me/blog/watchos-2-and-embedded-frameworks
Thanks for pointing this out #Miki and kudos to you. I had the same issue as you yesterday (and I added ShareKit 3.0.0 from CocoaPods to the app a few days ago). I suspected ShareKit giving me this problem, but now I can be confident of exactly which library is causing this. Here is what I found in my log (if it can benefit others):
Error Domain=LaunchServicesError Code=0 "The operation couldn’t be
completed. (LaunchServicesError error 0.)" UserInfo=0x7fa836097aa0
{Error=PackageInspectionFailed, ErrorDescription=Failed to load
Info.plist from bundle at path
/Users/{UserName}/Library/Developer/CoreSimulator/Devices/99FEB34E-6F00-4EFA-861A-A6985AFE96D8/data/Library/Caches/com.apple.mobile.installd.staging/temp.X7eead/extracted/{AppName}.app/Frameworks/LiveSDK.framework}
I'm adMob user and I solved enabling "Copy only when installing" in App target -> Build Phases -> Embed Frameworks.
Have the same problem after localizing my app. Especially Info.plist. Seems I had empty CFBundleShortVersionString in InfoPlist.strings, after fixing that the simulator started to work properly.
I got this issue by adding a folder reference named "Resources".
If I give it another name, then it runs !
There are a number of things that can cause this error. The best general answer is to search the console log for CoreSimulator, as the simulator logs the underlying problem when it displays this message.
If you have installed any libraries using CocoaPods while XCode was open, all you have to do is, Close XCode and remove the library from Pod file, run the command pod install it will uninstall that library. then install library again. Please make sure that XCode is always closed while installing and uninstalling libraries.
I hade exactly the same problem and it was ShareKit.
On the simulator I had "Error Domain=LaunchServicesError Code=0".
On the iPhone6 device I had "App installation failed Could not inspect the application package."
When I removed ShareKit it worked.
I had this problem when I added an Apple Watch target to my app, and accidentally removed the InterfaceController.m file. Adding back the file in the target fixed the problem.
There are different things that can cause this. Looking in the console may well give you a clue.
In my case - the issue was an extension built before I changed the name of the product. Xcode didn't clear the old one out, then got stressed at two extensions with the same bundle id.
(Deleting the build folder fixed my particular issue).
In my case the issue came from an icon set added with some images missing. Once I replaced the icon set with another one, and uninstalled the app in the simulator; I was able to run it again.
I removed all my pod files and replaced them all, seems the problem for me was the bolts framework was old, and causing this error. I did a clean & reset content and now it's all good.
Do not add the google maps framework to the embedded lib section this solved my build break.
I had this error in developing app for Apple Watch after adding in Info.plist: "App Transport Security Settings" and "Allow Arbitry Loads" = YES. (In WatchKit App, in WatchKit Extension is good!!)
Deleting this two rows, it keeps working.
For me, the problem occurs because I added my framework (GoogleMobileAds.framework in my case) to Embedded Binaries, not Linked Frameworks and Libraries.
For your information, AdMob instructs you to use Add Files to "Your Project" menu on Xcode, but I was too lazy to obey the instruction.
I had this problem when trying to run UI tests in a project containing AWS Cognito.
Here's how I resolved it.
Select the UI test target.
Click on the Build Phases section.
Click the plus to add a Copy Files phase
In the Copy Files phase, change the destination to Frameworks (see the last image)
Hit the plus below the Copy Files phase.
Select the framework for which you're receiving an error and hit the Add button (yours will probably not be the first item in your project hierarchy).
It should end up looking like this.
Repeat steps 5 and 6 for all frameworks giving you an error.
Run your tests.
I am using PhoneGap 2.2.0 and XCode 4.5.2.
I can test my programs in the simulators, and I can put them on my devices to test them.
But I simply cannot build for distribution. It always fails with the following error:
my-projevt-path/Classes/AppDelegate.h:30:9: 'Cordova/CDVViewController.h' file not found
I've seen this problem around the web and still can't make it work, given whatever solutions have been posted.
I've changed things in Build Settings, I've reinstalled PhoneGap, I've run new lines in terminal, I've done my app over starting a new PhoneGap project from scratch, I've checked preferences in the build location in Xcode... I can't figure this out AT ALL.
Please, can anyone help? I've been working on this for days.
Thanks!
Problems in Xcode
If you have compilation problems related to missing headers, the build products should build into the same build directory. You may need to set the preference "Xcode Preferences -> Locations -> Derived Data -> Advanced…" to "Unique". This is the default setting for Xcode on a fresh new install, if you upgraded from older versions of Xcode, you might have a legacy preference in there that you need to update.
Found the answer!!!
Yes I am getting the same problem yeah and some help could be great.....
I followed all the instructions even with the ./update_cordova_subproject path as well it does not work. Also I solved the locking problem but I could not find the solution to this problem
The answer, in my case, had seemingly nothing to do with the error message that was being sent. Missing header files? That didn't seem to be the issue. Or, at least, not the direct cause of the issue.
This was an issue with my provisioning/certificates being somehow not right. I had re-created them several times, but it continued to be an issue.
I sent the job to another developer, who opened it on his machine, revoked my certificates and created new ones, and built it without changing anything else. He forwarded me the certificate, the provisioning, and an archive of the job. I opened the archive in xCode and validated it and uploaded it. And it was fine.
If you have got this problem, be certain your certificate/provisioning is set up right. I thought mine was, but apparently it wasn't? The "Apple Process" is definitely weird, and when certificates / profiles gets messed up, problems arise.
I was having the same problem and just solved it! First of the problem may very well be because of your distribution provisioning files... but when you look at the Project Navigator in xCode at the top level you have your Project and inside you have the CordovaLib.xcodeproj click on this file and you will see the iOS Deployment target. Make sure the proper IOS version is selected there. This is 1/2.
2) Then you need to duplicate the Release configuration and rename it Distribution. While the CordovaLib.xcodeproj is selected make a build and then build the actual project. This worked smoothly for me.
Add this line to your Build Settings -> Header Search Paths:
$(OBJROOT)/UninstalledProducts/$(PLATFORM_NAME)/include
Don't replace the existing line that looks similar, that is still needed to be backwards compatible with Xcode 7 and Xcode 6.4.
I've got an app that I created that I'm trying to test on an older iphone 3g. I've used this phone many times for testing but this new app for some reason will not accept the build.
I've done some searching and found that I need to charge the architecture from "armv7" to "armv6", I did this in both the project and target. After doing that I get the following error when trying to build to the device (construction is the name of the app)
Could not launch "construction"
No such file or directory (/Users/Matthew/Library/Developer/Xcode/DerivedData/Construction-cqtujdbjhpvbkrehtfzwvuhvxdrs/Build/Products/Debug-iphoneos/Construction.app/Construction)
But I can build in the simulator at it works fine... any idea?
thank you so much - clearing UIRequiredDeviceCapabilities in Info.plist would have never appeared to me.
None of these solutions worked for me. I'm using XCode 4.5 and ML. What I ended up doing (and still need to test thoroughly), was to re-create my project, started clean and then moved all sources and libraries to the new project and chose my provisioning profile for this new project. In the copy, I also manually copied the contents of the old Info.plist file and pasted them onto the newly Info.plist replacing them all.
In my case, I'm using CorePlot and that library needs armv7 (according to linker), so I can't just go armv6.
What I'm trying to figure out is when (cheap) XCode changed some settings to not run as a debugger on the device. I'm guessing something in the 'project.pbxproj' file. Otherwise I can't explain why the newly created project works and the old one doesn't.
I know this solution might not work for everyone, as in my case, as would lose all svn changes.
I'll post any progress on this.
My next step is to add CorePlot and let the project build it and not use the prebuilt one.
None of these worked for me either. But this DID work...
DO THE USUAL THINGS:
I cleared the build directory (cmd-k),
cleared the DerivedData (see prefs|Locations),
deleted the app from my iPhone 5,
unplugged the iPhone, and
restarted Xcode.
AND LASTLY DO THIS:
Open Xcode Organizer. Click on Devices | (your device name) | Applications. And finally, delete your application from here (aka. delete the app from your device, AGAIN).
Build and run...
Sorry I answered my own question! I figure I should leave this up in case anyone else has the same problem... I didn't update the plist setting to armv6 before... I did have to delete the armv7 in the plist to make it work
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 6 years ago.
Improve this question
Xcode has stopped being able to run my app, it started directly after I deleted it from the device and attempted to re-install by rerunning it in Xcode (something I've done hundreds of times before).
It says
"Could not launch XXX.app"
"No such file or directory (/Users/Mylaptop/Library/Developer/Xcode/DerivedData/MyApp-ekxcbebfpzkahtfkujyqkcwprzia/Build/Products/Debug-iphoneos/MyApps.app/MyApp)."
I've rebooted the phone, relaunched Xcode, cleaned everything, rebuilt everything. This error message won't go away.
This is with Xcode 4.5 which I've been using since it became available, if I revert to 4.3.2 then Xcode says "Finished running app" but it doesn't actually do anything - the app is neither installed nor run.
I'm completely stuck - unable to run anything on the device anymore.
Any suggestions?
That is really annoying. This error happens in a number of different situations. Sometimes restarting the Xcode, fixes the problem. If not, follow these steps:
Disconnect your device.
Delete the app from your device.
Quit Xcode (Do not just simply close the window, quit it)
Delete derived data folder (~/Library/Developer/Xcode/DerivedData/-gbrvhlvwmpiobxdujegtghggrffp - or something like that)
Now start Xcode once again, connect device and run the project. It should work fine.
from DhilipSiva blog
Try deleting "Required device capabilities" in the -Info.plist file.
You can't require armv7 on a 3G, and you can't require armv6 on any newer device, so just delete this attribute entirely.
I found the answer. The iOS deployment target's version was not the same as my device's OS version.
First tried some of the above with info.plists and deleting derived data, clean, etc.
My solution: quit XCode, reopen project. Go to derived data in Finder. Deleted data for all projects (was all trashable, but I would try deleting your troubled projectdata first). And then it worked again. Deleting derived data from XCode didn't work.
The following resolved my problem... my app worked for me in debug/release, then I built a few ad-hoc archives and debug/release builds stopped working.
Symptoms:
invalid entitlements errors when launching from Xcode to device (play with entitlements...)
immediate abort with no error (finished running ) when running simulator
could not launch ... directory blabla.../build/product/debug-iphoneos/... not found when launching from Xcode to device.
Eventually after trying to benefit from everyone else's pain I found in Targets [AppName]:
Build Settings
Build Locations
Build Products Path build
should be
Build Products Path build/Products
No idea how this got set incorrectly.
This must be hard-coded somewhere in Xcode/Springboard because 'Products' appears in both Xcode and in the Device console.
This is Xcode 4.5.1.
I solved this problem by
renaming a directory above my XCode project
Changing the name of the project in XCode fixed it for me.
In XCode, under the Project Navigator, click the project name, and it should let you rename it just like a file in Finder. Deleting derived data did not help.
I built my XCode Project with CMake and somehow it (or my stupid self) deleted or emptied the property "Executable file" in the info.plist. I set it back to ${EXECUTABLE_NAME} and it worked again.
Took me really alot of time working through all the suggestions and fixes until I finally found that problem.
Hope this will help some one struggling with the same problem
Edit:
It was in some way CMake messing up my plist file. I created my own Info.plist and used it the following way:
SET_TARGET_PROPERTIES( MyApp PROPERTIES MACOSX_BUNDLE_INFO_PLIST ${CMAKE_CURRENT_LIST_DIR}/MyApp.plist )
Inside my plist I had this entry:
<key>CFBundleExecutable</key> <string>${EXECUTABLE_NAME}</string>
Unfortunately CMake still seems to parse that file and replaced ${EXECUTABLE_NAME} with an empty string since its the CMake variable syntax. My quick work around is the following:
SET( EXECUTABLE_NAME "\${EXECUTABLE_NAME}" )
Now it works like a charm.
I am probably alone with exactly this problem, but who knows.
I had the same problem, but in my case I had a wrong requirement in my info.plist (require gyroscope for an iPhone 3Gs)
I tried to run my project on a different system other than that on which it was developed. I was getting “Could not launch xxx.app: .. No such file..”.
Removed the app from the device and then deleted the derived data from organizer in xcode for the app.
Organizer-->Projects-->Derived DAta-->Delete
My problem was resolved.
You need to set the deployment target LOWER than your device's version
For me, the solution was just to use the correct (non-distribution) provisioning profile.
I was defaulting to always using my ad hoc provisioning profile, but then I changed to using my developer profile (team profile) and that solved things. I went ahead and cleaned out the Derived Data directory to be safe but I don't know for certain if it is required.
XCode used to have a warning that told you to use the correct provisioning profile but that error message seems to have gone away in XCode 4.5.
I've had this problem by a very strange solution.
My problem was slightly different as I have 2 Developer certificates in Keychain. We have two developer accounts (lets say AD and BD).
1) I did change Bundle identifier from com.BD.game to com.AD.game
2) Device on which I had problems was only signed in AD provisioning profiles.
3) I was unable to debug the game on iPad - although the device had valid provisioning profiles, I had valid certificates, I restarted Mac, device, reinstalled Xcode ... nothing helped.
Do what i did today was examining the project.pbxproj file for any strange entries.
What I found was that Xcode was using proper provisioning profile, but signed the ipa/app with wrong certificate.
"CODE_SIGN_IDENTITY[sdk=iphoneos*]" = "iPhone Developer: **BD** (XX******)";
After I manualy corrected the name and id; everything works like charm.
I got the same error. In my case I was set deployment target as 6.1 and trying to run an iOS 5.1 iPad. When I changed my deployment target to 4.3, issue solved.
Still having the problem . Try this
Disconnect your device.
Delete the app from your device.
Quit xcode.
Now start Xcode, connect device and run the project. It should work fine.
For me (using IOS 7 and Xcode 5), the error went away right after I did "Add to Member Center" with my device in the Organizer.
I would like to mention that the easiest way to open the DerivedData folder in Finder is the following:
Open the Organizer.
Click on "Projects".
Select your problematic project.
Next to the path of the DerivedData, click on the little right-arrow button.
Deleting the contents of the DerivedData folder worked for me. Instead of using the "Delete..." button, you should have more success deleting the files manually through Finder.
Go to: your project Target - > Info and from CustoM iOS Target Properties remove the Required Device Capabilities.
In my case that were armv7 and armv7s.
After that the app was built successfully on my iPhone 4.
This is how it looks after i removed both of requirements
For me, I forgot that I had "telephony" in the "Required device capabilities" in the info.plist. Removed that, and it finally worked on my iPad.
For me restarting of Xcode, cleaning DerivedData and restaring device wasn't enough in most cases, until I had figured out that iTunes was also running, and after quitting iTunes everything worked fine!
So my steps now are simple:
1. Quit Xcode.
2. If iTunes is running, quit iTunes.
3. Reopen project.
No need to remove app from the device, clean project or restart/disconnect device.
I think that's because Xcode and iTunes use some common libraries (as you know, Xcode Installer always asks to quit iTunes on installing iOS SDK).
I had this problem and tried a number of the suggestions which didn't work for me - then I found the one about removing the "Required device capabilities" in the -Info.plist file (which for me included location-services & gps)
That worked!
I then re-added them and it still worked.. go figure.
This was xCode 4.6.1 & my app is developer with Phonegap/Cordova
I tried all the above and yet it still wouldn't run. I fixed the problem by changing the derived build location. File>Project settings>"derived data location" change to project-relative. Or you could just make sure the default path has permission to read/write.
My issue seemed to be picking picking Portrait (top home button) as Item 0 in Supported Interface orientations in my plist. Removing that or moving it down seemed to fix my problem. Go figure.
I had this problem too for a Universal app with Xcode 4.5 on my iPhone ONLY, where I had two debug devices:
iPhone 4 iOS 5.1.1
iPad 1 iOS 5.1.1
The Info.plist had an empty entry under "Required device capabilities"
I know that I did not enter this empty 'Item 0'. The app loads on the iPhone
since I removed the empty item. I did not encounter
this problem on any of several earlier versions of Xcode,
This means that Xcode 4.5 handles this 'inserted' item differently
for the two devices I use. I have been wrong before, but this does seem
like a bug in Xcode 4.5.
This may seem obvious but you must also set your deployment target to the operating system that your device is running.
So if you upgrade to iOS 6, it will set your deployment target to iOS 6. You'll need to deploy to 5.1 if the device you are testing on still runs 5.1.
My issue finally got resolved by checking to make sure that the productName attribute in the /* Begin PBXNativeTarget section */ section of my project.pbxproj file matched the name attribute.
Once editing it so that they were the same, Xcode finally runs the app on my device correctly!
Thanks to Max Weisel for helping me! :D
Deleting the derived data folder did not help for me.
Using Xcode 4.4.2 the only solution was to open Organizer and delete old expired and extraneous provisioning profiles on the iDevice. Then everything worked perfectly again.
This may be a red herring, but I experienced these problems when I added custom launch images before deleting the default ones. Deleting the default launch and custom images and then adding back in the custom ones fixed it for me. I'm working with iOS 6 and Xcode 4.5.2
There seems to be a few different things that can cause this very helpful error message.
For me, it was down to an incorrect "Required device capabilities" in the Info.plist. I had added a blank array item by mistake (on top of the the architecture, armv7).
Deleted the blank array item and now everything is fine!
I had this problem and nothing really helped except:
My problem started after changing the contents of my info.plist and no reverting had helped.
What solved it for me was:
Create a vanilla info.plist in a brand new project
replace the old info.plist with the new
renaming it (like app_info.plist)
Set Build Settings/Packaging/INFOPLIST_FILE to be the new one.
Make all the changes you need for your project
Hope that helps. I tried everything else suggested here and this was the only solution for me.
Facing same problem but now problem is solved, i deleted Executable file info.plist. I set it back to ${EXECUTABLE_NAME} and it worked again.. :)
In my case i just set 777 permission directly to xxx.app folder to all files and work!