I am trying to get dependency resolution to work in Grails 2.2 from a custom repository which has username password.
I have tried adding the following in my BuildConfig.groovy
grails.project.dependency.resolver = "maven"
grails.project.ivy.authentication = {
repositories {
mavenRepo('https://maven.companyname.com/repository/repository-name') {
auth([
username: 'myusername',
password: 'mypassword'
])
}
}
}
But I get error like
Caused by: groovy.lang.MissingMethodException: No signature of method: groovy.util.ConfigSlurper$_parse_closure5.auth() is applicable for argument types: (java.util.LinkedHashMap) values:
I tried looking at https://grails.github.io/grails2-doc/2.2.0/guide/single.html#dependencyRepositories but it does not tell me more information. It does say that I need to put the credentials in settings.groovy but is that absolutely necessary? I tried putting the credentials inside mavenRepo closure but that did not work. Any ideas?
Grails 2 - quite some time ago…
This way it is working here.
BuildConfig.groovy:
…
grails.project.dependency.resolver = "ivy"
grails.project.dependency.resolution = {
repositories {
mavenRepo "https://repo.example.com/myrepo"
}
…
~/.grails/settings.groovy:
…
grails.project.ivy.authentication = {
credentials {
realm = "My Realm"
host = "repo.example.com"
username = "user"
password = "secret"
}
}
…
Related
I need to set two or more credentials to a job, my plan is to use it separately like below, so that it can be used in multiple jobs
static void _artifactoryCredentialBinding(Job job) {
job.with {
wrappers {
credentialsBinding {
usernamePassword('USERNAME', 'PASSWORD', 'xxxxx')
}
}
}
}
static void _jasyptCredentialBinding(Job job) {
return job.with {
wrappers {
credentialsBinding {
usernamePassword('', 'PASSWORD', 'jasypt-credentials')
}
}
}
}
When I do this the first credential is getting over ridden by the second credential.
I will be calling these two methods as a helper method in where ever necessary in my groovy file.
I would require to add multiple credentials in few jobs and only one credential in a job.
Adding the credentials under one wrapper will work - multiple-credentials, but I will not be able to reuse if I add multiple under the same.
I tried returning the Job in the above methods and used the same methods to set the creds but getting the error while building -
ERROR: (CredentialBindingUtil.groovy, line 28) No signature of method: xxxx.CredentialBindingUtil$__pfJasyptCredentialBinding_closure3.wrappers() is applicable for argument types: (xxx.CredentialBindingUtil$__pfJasyptCredentialBinding_closure3$_closure9) values: [xxxx.CredentialBindingUtil$__pfJasyptCredentialBinding_closure3$_closure9#11b4d391]
[Office365connector] No webhooks to notify
How do I make the credentials to be appended with the existing ones ?
As discussed in the comments, it's possible to achieve this through the Configure Block.
static void _artifactoryCredentialBinding(def job) {
job.with {
configure { node ->
node / 'buildWrappers' / 'org.jenkinsci.plugins.credentialsbinding.impl.SecretBuildWrapper' / 'bindings' << 'org.jenkinsci.plugins.credentialsbinding.impl.UsernamePasswordMultiBinding' {
usernameVariable 'some-credential-id'
credentialsId PASS1
passwordVariable USER1
}
}
}
}
static void _jasyptCredentialBinding(def job) {
job.with {
configure { node ->
node / 'buildWrappers' / 'org.jenkinsci.plugins.credentialsbinding.impl.SecretBuildWrapper' / 'bindings' << 'org.jenkinsci.plugins.credentialsbinding.impl.UsernamePasswordMultiBinding' {
usernameVariable 'some-credential-id'
credentialsId PASS2
passwordVariable USER2
}
}
}
}
def a_job = job('a-temporaryjob')
_artifactoryCredentialBinding(a_job)
_jasyptCredentialBinding(a_job)
To understand how the Configure Block works I highly suggest reading the wiki page and an older blog post which explains step by step how to configure an unsupported plugin.
I am trying to apply Jasypt plugin in my application to encrypt fields of my table.
here's my code below.
DOMAIN CLASS
import com.bloomhealthco.jasypt.GormEncryptedStringType;
class TestForm {
String name
String age
String gender
static mapping = {
name type: GormEncryptedStringType
age type: GormEncryptedStringType
gender type: GormEncryptedStringType
}
static constraints = {
}
}
BUILDCONFIG
plugins {
// plugins for the build system only
build ":tomcat:7.0.52.1"
// plugins for the compile step
compile ":scaffolding:2.0.2"
compile ':cache:1.1.1'
compile ":jasypt-encryption:1.2.1"
// plugins needed at runtime but not for compilation
runtime ":hibernate:3.6.10.9" //or ":hibernate4:4.3.4"
}
CONFIG
//Database encryption configuration
Jasypt {
algorithm = "PBEWITHSHA256AND256BITAES-CBC-BC"
providerName = "BC"
password = "c3kr37"
keyObtentionIterations = 1000
}
all those i have done in my application, This also successfully downloads jasypt plugin. but when i try to save record it show the following error
Error 500: Internal Server Error
URI:
/grailsTest/testForm/save
Class:
org.jasypt.exceptions.EncryptionInitializationException
Message:
No string encryptor registered for hibernate with name "gormEncryptor"
Hope for the right direction to use this plugin, Thanks in advance.
Using Jms plugin for grails and add dependencies for ActiveMQ worked perfect. No problems.
Now I want to go beyond and perform some customization and fine tuning to make ActiveMQ behaves as I need, so I need to configure the broker instance.
e.g. I want to use JDBC storage.
How is possible to do that with grails and the vm embedded broker?
I've actually followed the reference documentation for the JMS grails plugin ... I add jms plugin and activemq dependencies and place this on resources:
jmsConnectionFactory(SingleConnectionFactory) {
targetConnectionFactory = { ActiveMQConnectionFactory cf ->
//brokerURL = 'vm://localhost'
brokerURL = 'tcp://localhost:61616?jms.useAsyncSend=true'
}
}
As I've said this is fine ... but I need more tuning here, so I've tried to go adding this in the resources, so I can access the broker to fine tuning:
/* Establish the broker */
amq.broker(useJmx: false, persistent: true) {
amq.transportConnectors() {
amq.transportConnector(uri: "tcp://localhost:61616")
}
}
amqConnectionFactory(ActiveMQConnectionFactory) {
brokerURL = "vm://localhost"
}
jmsConnectionFactory(SingleConnectionFactory) {
targetConnectionFactory = ref(amqConnectionFactory)
}
But I start to have dependency problems like:
2015-03-18 13:44:14 - spring.RuntimeSpringConfigUtilities [RuntimeConfiguration] Unable to load beans from resources.groovy
org.springframework.beans.FatalBeanException: NamespaceHandler class [org.apache.xbean.spring.context.v2.XBeanNamespaceHandler] for namespace [http://activemq.apache.org/schema/core] not found; nested exception is java.lang.ClassNotFoundException: org.apache.xbean.spring.context.v2.XBeanNamespaceHandler
So I start adding dependencies:
compile 'org.apache.activemq:activemq-spring:5.7.0'
compile 'org.springframework:spring-beans:4.1.1.RELEASE'
compile 'org.apache.xbean:xbean-spring:4.1'
But still have problems:
java.lang.NoClassDefFoundError: org/springframework/core/OrderComparator$OrderSourceProvider
At this point I get the feeling that I am doing something wrong since I see too much complexity.
Is there a best way to do this?
In order to be able to configure ActiveMQ you'll need:
Dependencies:
compile 'org.apache.activemq:activemq-core:5.7.0'
compile 'org.apache.activemq:activemq-spring:5.7.0'
compile 'org.springframework:spring-beans:4.0.6.RELEASE'
compile 'org.apache.xbean:xbean-spring:4.1'
Resources.groovy:
xmlns amq:"http://activemq.apache.org/schema/core"
...
/* Establish the broker */
amq.broker(useJmx: false, persistent: true) {
amq.transportConnectors() {
amq.transportConnector(uri: "tcp://localhost:61616")
}
//HERE YOU CAN CONFIGURE BROKER
}
amqConnectionFactory(ActiveMQConnectionFactory) {
brokerURL = "vm://localhost"
}
jmsConnectionFactory(SingleConnectionFactory) {
targetConnectionFactory = ref(amqConnectionFactory)
}
The above answer of Rafael is very useful just a small change you need to do if you are working with Grails 3.2.+ it took me few hrs to figure it out.
Depedencies (add them in build.gradle)
compile 'org.grails.plugins:jms:2.0.0.RC2'
compile 'org.apache.activemq:activemq-core:5.7.0'
compile 'org.apache.activemq:activemq-spring:5.14.5'
compile 'org.apache.xbean:xbean-spring:4.1'
Resources.groovy (should look something like)
import org.apache.activemq.ActiveMQConnectionFactory
import org.springframework.jms.connection.SingleConnectionFactory
beans = {
....
xmlns amq:"http://activemq.apache.org/schema/core"
amq.broker(useJmx: false, persistent: true) {
amq.transportConnectors() {
amq.'transportConnector'(uri: "tcp://localhost:61616")
// optional if you want to do something with mqtt
amq.'transportConnector'(uri:'mqtt://0.0.0.0:61612')
}
}
jmsConnectionFactory(SingleConnectionFactory) {
targetConnectionFactory = { ActiveMQConnectionFactory cf ->
brokerURL = 'vm://localhost'
}
}
...
}
We are using grails 2.3.5 app with mongodb (no hibernate installed). I had forked & modified grails database session plugin with HQL queries to use simple queries so as to support mongodb.
Then when I'm trying to login via ajax, it fails. By fail, I mean that, session in created & persisted to the database but not able to login. When I enabled to logs, I saw cookies is present in the request path /j_spring_security_check after authentication but is not available after redirect i.e. in path /login/ajaxSuccess which causing authentication to be treated as false & a new session is created.
Our URL mapping config looks like this: (Does not matters)
"/$controller/$action?/$id?(.$format)?" {
constraints {
}
}
"/v2/$customController/action/$customAction" {
controller = {
return params.customController?.toUpperCamelCase()
}
action = {
return params.customAction?.toUpperCamelCase()
}
}
"/v2/$resource/$resourceId?/$subResource?/$subResourceId?" {
controller = {
if (params.subResource) {
return params.subResource.toUpperCamelCase()
}
return params.resource.toUpperCamelCase()
}
action = {
Map actionMethodMap = [GET: params.resourceId ? "show" : "index", POST: "save", PUT: "update", DELETE: "delete"]
return actionMethodMap[request.method.toUpperCase()]
}
id = {
if (params.subResource && params.subResourceId) {
return params.subResourceId
}
return params.resourceId
}
}
Our configuration looks like this for spring security:
grails.plugins.springsecurity.authority.className = 'com.test.Role'
grails.plugins.springsecurity.userLookup.userDomainClassName = 'com.test.User'
grails.plugins.springsecurity.userLookup.authorityJoinClassName = 'com.test.UserRole'
grails.plugins.springsecurity.useSessionFixationPrevention = true
//grails.plugins.springsecurity.redirectStrategy.contextRelative = true
grails.plugins.springsecurity.successHandler.defaultTargetUrl = "/app/ng/index.html"
grails.plugins.springsecurity.auth.loginFormUrl = "/app/ng/index.html#/auth/signin"
grails.plugins.springsecurity.auth.ajaxLoginFormUrl = "/v2/login/action/auth-ajax"
grails.plugins.springsecurity.ui.encodePassword = false
grails.plugins.springsecurity.controllerAnnotations.staticRules = [
'/j_spring_security_switch_user': ['ROLE_ADMIN'],
'/ck/standard/filemanager': ['ROLE_ADMIN'],
'/ck/standard/uploader': ['ROLE_ADMIN'],
'/ck/ofm/filemanager': ['ROLE_ADMIN'],
'/ck/ofm/filetree': ['ROLE_ADMIN'],
'/quartz/**': ["ROLE_ADMIN"],
'/**' : ['IS_AUTHENTICATED_ANONYMOUSLY']
]
Other than this, grails.serverURL config is commented for all environments to support wildcard subdomain.
Using:
Spring Security Core plugin version 1.2.7.3
Cookie plugin version 0.51
Webxml plugin version 1.4.1
Mongodb plugin version 2.0.1
I'm using Grails 2.2.4 to build a plugin. The plugin is an access manager and need to access some datasources (more than one). As the Grails manual specify in Providing Basic Artefacts, the DataSource.groovy is not bundled with the plugin.
Is there a way to "copy" the datasources defined on the plugin DataSource.groovy file to the application's DataSource.groovy file that uses the plugin?
I really don't want to manually define the plugin datasources on every application that uses the plugin.
============
Full stacktrace (requested in comments)
2013-12-11 11:39:33,055 ERROR org.codehaus.groovy.grails.web.context.GrailsConte
xtLoader - Error initializing the application: groovy.lang.MissingMethodExceptio
n: No signature of method: portal.Aplicacao.methodMissing() is applicable for ar
gument types: () values: []
org.codehaus.groovy.runtime.InvokerInvocationException: groovy.lang.MissingMetho
dException: No signature of method: portal.Aplicacao.methodMissing() is applicab
le for argument types: () values: []
at grails.util.Environment.evaluateEnvironmentSpecificBlock(Environment.
java:308)
at grails.util.Environment.executeForEnvironment(Environment.java:301)
at grails.util.Environment.executeForCurrentEnvironment(Environment.java
:277)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor .java:908)
at java.lang.Thread.run(Thread.java:662)
Caused by: groovy.lang.MissingMethodException: No signature of method: portal.Ap
licacao.methodMissing() is applicable for argument types: () values: []
at portal.PortalService.criaAplicacaoNoPortal(PortalService.groovy:233)
at BootStrap$_closure1.doCall(BootStrap.groovy:16)
... 8 more
You can use the platform-core plugin, and then define the dataSources as application config in the doWithConfig section of your plugin, like so:
def doWithConfig = { config ->
// ...
application {
Environment.executeForCurrentEnvironment {
development {
dataSource_myDatasource {
dbCreate = "create-drop"
url = "jdbc:h2:mem:devDb;MVCC=TRUE;LOCK_TIMEOUT=10000"
// other datasource configuration here...
}
}
}
test {
dataSource_myDatasource {
// test datasource
dbCreate = "create-drop"
url = "jdbc:h2:mem:devDb;MVCC=TRUE;LOCK_TIMEOUT=10000"
// ...
}
}
}
}
}
}