I have simple server running on my nodeMCU and I would like to redirect all user request to one function. So that any page that will user type it will always go to the specific function.
Is there some wildcard or something?
I have tried something like this but it is not working:
server.on("/*",function);
server.on("*",function);
Ok i finnaly found it
server.onNotFound(function)
Related
I have a routine that currently uses
httpgettext to send two urls out to google..
The first with the maps key
and the second to get some distance calculations with is returned as a JSON object...
It all worked fine but now the client wants it to go through a proxy server.
I have tried modifying code that was on synapse knowledge base but i just get a bad response...
The code looks like this that works no proxy...
buildstring:='http://maps.google.com/maps?file=api&v2&key=ASASASASASASASAS-AAAA';
httpgettext(buildstring,myoutput);
buildstring:='http://maps.googleapis.com/maps/api/directions/json?origin='+trim(start_postcode)+'&destination='+trim(end_postcode)+'&sensor=false';
httpgettext(buildstring,myoutput);
How do I get the same response but through a proxy?
The google maps key above is fake - and will not work - you need to use your own.
When I tried modifying an example the first request came back OK the second one came back with a 400 bad request.
With thanks in advance
Phil Hutchinson
I have found the issue?
I looked at the source code demos supplied and if I create a type of httpsend and put the proxy info in and send the request, the first one works.
The second request fails - so it must be something to do with the htppsend method leaving some rubbish in the type. If I destroy it and send it again it works fine.
Not the perfect solution but it works!
I am trying to check the incomming request to my server. Another server which has hosted MVC application. An action method is sending some data to my server. I am using Fiddler. But somehow it is not showing the incoming request.
Below mentioned are my settings in Fiddler Custom Rules..
static function OnBeforeRequest(oSession: Session) {
if (oSession.host.toLowerCase() == "IP Address:8888")
oSession.host = "IP Address:82";
}
Below mentioned are my Fiddler Options.
Am I missing anything ?
It sounds like you're trying to use Fiddler as a reverse proxy. You should read the steps at http://www.fiddler2.com/r/?reverseproxy. The biggest thing to understand is that when running as a reverse proxy, you only see traffic in Fiddler if the client's URL is changed to point at Fiddler.
If it is ssl connection then you need to enable option 'capture https connection' from 'https' tab. Did you try to invoke request from other browser like chrome ? Does fiddler capture anything?
You don't need custom rule for this case. It should work if you enable these settings. I have faced only some problems in other browsers like FF.
I'm not sure I can answer your question fully without knowing a few additional pieces of information.
If the request being made is not a HTTP request, Fiddler will not be able to handle it.
Also, if you're using the loopback address localhost then Fiddler may not be able to find it.
I'm adding Google Oauth2 to a Rails app, but have been unable to get past the early stages.
I've set up an app, and defined client ID and secret.But I'm getting Invalid parameter value for redirect_uri: Non-public domains not allowed: http://localhost/path/to/callback
What does this mean? Is this because I'm testing on a local dev environment?
Thanks for any ideas.
EDIT
This might be because the app's URI differs from the sending URI. But when I go to Google and try to authorize the path to my dev app, I get OAuth2 redirect is invalid. Is this a limitation of using a locally hosted app?
EDIT 2
The request I'm generating looks like this:
https://accounts.google.com/o/oauth2/auth?response_type=code&client_id=###########&redirect_uri=http%3A%2F%2Fmyapp.dev%2Fusers%2Fauth%2Fgoogle_oauth2%2Fcallback&scope=https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fuserinfo.profile&approval_prompt=&access_type=offline
Is this correct. I've tried this with client_id including and excluding the .apps.googleusercontent.com section. Neither seems to work.
I was getting the redirect error for my python / tornado app running on ubuntu. Using localhost didn't work as the accepted answer highlighted. Google wants a public domain.
My solution was to piggyback "example.com" which is public and create a sub domain in my /etc/hosts file. The sub domain would work on my local dev box and google would be happy with the example.com domain. I registering the redirects via the google console and the redirect worked successfully for me.
I added the following to my /etc/hosts:
192.168.33.100 devbox devbox.example.com
In my case the IP was that of my machine. I could also have used 127.0.0.1 instead.
My Google API console (https://code.google.com/apis/console) set up for a new client ID was:
"Application Type: Web Application".
Via "Your site or hostname (more options)":
In "Authorized Redirect URIs" I entered http://devbox.example.com/
In "Authorized JavaScript Origins" I entered http://devbox.example.com/
Using xip.io you can provide a public url to redirect to like http://your_pow_app.192.168.0.1.xip.io/user/auth/google_oauth2/callback
Tested and working.
I used my public hostname. It helps if you have a static IP address. I used http://www.displaymyhostname.com/ to get my hostname. I plugged it straight into the Authorized JavaScript origins field when I created a new Web Application Client ID.
P.S. My hostname looked something like this: 111.111.111.111.static.exetel.com.au
This is my answer to a related question https://stackoverflow.com/a/23517146/1320083
For anyone else finding this, my problem was combination of several things.
I could not get callbacks to work on a local machine. The console API console suggests it is possible, but I couldn't get it working. Not sure of this is down to the service, or to my network/ connection/ firewall/ etc.
In the API console you must specify the full redirect URI, not just the root url back to your app.
Google lists scope parameters here https://developers.google.com/gdata/faq#AuthScopes. It seems this information is outdated, and the correct format for these is now https://www.googleapis.com/auth/plus.me, https://www.googleapis.com/auth/youtube, etc. Maybe someone else can confirm this?
I had a few other things going on as well. I had written a full explanation on another of my questions here on SO. Unfortunately my comments were deleted instead of moved by a moderator because I posted in the wrong place. I can't now remember all that I wrote. For others facing similar issue, feel free to comment, it may jog my memory so I can offer some ideas.
Error redirect_uri_mismatch - This error can occur when you entered an incorrect bundle ID in your Google Developers Console project that does not match your app's bundle ID. Check that your client ID and bundle ID match the values that are displayed in the Developers Console.
For me it was the function that built up the google url. I put line breaks in the string, once I removed the line breaks the url worked again.
I faced this issue but found it was really not an issue. As explained in my blog you can use the public redirect URI even when you are working on your localhost development machine. Google will just return the authorization code to the public URI where you can cut and paste it to your local machine.
I have started using the websocket php example in http://code.google.com/p/phpwebsocket/ It works pretty well on localhost but unfortunately, no client other than localhost can connect to the websocket server. And whenever I change the path to something like http://10.27.50.25:8787/client.html, it does not let the client to connect. Does anyone have any idea/sample about how to fix it?
Thanks in advance
Could be a crossdomain problem. Modern browsers prevent access to hosts other than the one where the page loaded from. You can get around it by providing JSON as an output then using jQuery Ajax JSON parsing.
I'm working on an app that uses Yahoo OAuth. The OAuth had been working fine but I just registered my domain with Yahoo and now it will not let me use the OAuth when I develop locally because
"Custom port is not allowed or the host is not registered with this consumer key."
The issue is because my call back URL is to a domain that is not registered with Yahoo (http://localhost:8080/welcome).
I'm not sure what to do. I'm also new to development so if you could be specific with suggestions that would be awesome! Any help is greatly appreciated.
Hiii... yahoo works on localhost :).. what you have to do is while registering for a yahoo consumer key and secret key, the registration page asks you what type of application is yours. I guess it gives you two options , website and the oder one as stand alone app. Choose stand alone app as in your case. Then it will give you a pair of keys, and it will work on localhost :). Enjoy!
It looks like Yahoo! doesn't want you to do this. Some answers from similar questions might be helpful (or not):
How do I develop against OAuth locally?
401 Unauthorized using Yahoo OAuth
Yahoo OAuth question
EDIT: more evidence Yahoo! doesn't support this: http://developer.yahoo.net/forum/?showtopic=6496&cookiecheckonly=1
I found the simplest solution was just to register for a separate key for my development environment. As long as you don't verify the domain for that key, you shouldn't hit any issues.
After many attempts, I too came to the conclusion that Yahoo's redirect_uri does not seem to work with ports other than 80.
The one solution that worked for me:
Download ngrok
Run the app and input ngrok http xxxx in the console - where xxxx is the port you are trying to access
The command will generate a http://xxxxxx.ngrok.io forwarding link that can be used for Yahoo's needs
Create a new Installed Application at https://developer.yahoo.com/apps/create/ and input http://xxxxxx.ngrok.io in the Callback Domain field.
Links should now work with this redirect_uri
Addressing Muhammad's comment in Vignes's answer here because I can't comment. You should be able to use a callback with a stand alone app if you specify 127.0.0.1 as the callback domain. You may also needed to change the port that your local server is listening to, because you cannot request that yahoo use e.g. port 8000. Make sure your local server is listening to port 80.
As of writing, setting the Application Type to Installed Application and then leaving the Callback Domain blank will give you errors.
What works is configuring 127.0.0.1 as the Callback Domain for the app. This works regardless if you are choosing Web Application or Installed Application as the Application Type. However, Yahoo! does not accept callback URLs with ports in it so you have to make sure your app listens to port 80 (or 443 if https) when running locally.
Another less ideal option would be using some random non-existent domain like local.dev.env.com as Callback Domain and then editing your hosts file by adding this:
127.0.0.1 local.dev.env.com
This will forward all requests on local.dev.env.com to 127.0.0.1.