I tried to replace the Page content using Microsoft Graph like this:
MultipartFormDataContent form = new MultipartFormDataContent();
form.Add( some stream contents );
var formdatastream = form.ReadAsStreamAsync();
graphClient.Users[userPrincipalName]
.Onenote
.Pages[onenotepage.Id]
.Content
.Request()
.PutAsync<OnenotePage>(formdatastream);
It returns No HTTP resource was found that matches the request, which implies that it does not accept an HTTP PUT request.
Clearly, it is saying it accepts HTTP Patch so maybe the .Net library needs to be changed?
This is a known issue and is a result of a mismatch of the service definition and the service behavior.
If you search for 'onenoteupdatepage' in the OneNote SDK tests, you can see one possible workaround for how to replace an existing page.
To update the OneNote API, you need to trigger a PATCH request like so:
PATCH https://graph.microsoft.com/v1.0/me/onenote/pages/{id}/content
{JSON PAYLOAD}
Perhaps that's not what the SDK is doing?
Related
The F# Saturn web framework fails on retrieving a value for GET method when acceptJson is a part of pipeline.
Below a sample code that I run to reproduce the issue:
let api = pipeline {
plug acceptJson
set_header "x-pipeline-type" "Api"
}
let apiRouter = router {
not_found_handler (setStatusCode 404 >=> text "Api 404")
pipe_through api
get "/test" (text "Hello world")
}
let appRouter = router {
forward "/api" apiRouter
}
appRouter is then added in the use_router section of the application code.
When I'm sending the request with a header Content-Type:application/json the response is "404 not found". But if I remove plug acceptJson from the api pipeline definition I get a correct response.
How to make Saturn work with the plug acceptJson?
I suspect 3615 is right - this seems similar to a problem I just solved yesterday after beating my head against the wall for a week. A request to my app (just a straight app from "dotnew new Saturn") from my browser was accepted. But a request to the same url from a test method returned a 404. It boiled down to the fact that the test request was missing an "Accept" header. When I added "Accept text/html", it worked. What I deduced from that is that, if the app can't find a content type that will be accepted according to the request, then it will report a 404. Your situation is the same - you're trying to return Json, but the request didn't include an "Accept application/json", so it can't find any page that the request would accept.
Of course, I could be wrong.
I am attempting to get an OAuth2 access token from ZOHO using RestSharp code. The Postman simulation works correctly so I know there is something I'm missing in my code.
I always get an "invalid client id" result status. However in Postman, it works and returns a code when I click the "Get new access token". I have the same items as in the Postman authorization tab (client_id, client_secret, etc). In Postman, "Body" is set to "none", and there are no parameters or headers. The only difference between my code and postman, is that Postman requires the Callback URL. My code is trying to get the code using "self-client", which bypasses the callback URL.
I have tried several different alternatives to the request call including ParameterType.Body, and ParameterType.GetOrPost. Is GetOrPost the same as a form?
client = New RestClient(ZOHO_API_URL)
request = New RestRequest(TokenUrl, Method.POST)
request.AddHeader("content-type", "application/x-www-form-urlencoded") ' also tried: "application/json")
request.AddParameter("grant_type", "authorization_code",
ParameterType.GetOrPost)
request.AddParameter("client_id", Client_ID, ParameterType.GetOrPost)
request.AddParameter("client_secret", Client_Secret,
ParameterType.GetOrPost)
request.AddParameter("code", Grant_Token, ParameterType.GetOrPost)
response = client.Execute(request)
This is the translated Postman code for RestSharp:
var client = new RestClient("http://");
var request = new RestRequest(Method.POST);
request.AddHeader("Postman-Token", "xxxxxx-xxxx-xxxx-xxxx-xxxxxxxxx");
request.AddHeader("cache-control", "no-cache");
IRestResponse response = client.Execute(request);
Any ideas on what I am doing wrong. I have tried to view the raw data coming across with Fiddler, but when I do that, Postman indicates a failure.
What code do I need to use to duplicate what Postman is doing?
How do I implement a callback URL if that is also required?
I quickly checked ZoHo REST API docs and it seems like you should use the Limited Input Device authentication flow.
From what I can understand from their help page, you indeed need to do a POST request, but parameters must be specified as query parameters:
https://accounts.zoho.com/oauth/v3/device/code?
client_id=1000.GMB0YULZHJK411248S8I5GZ4CHUEX0&
scope=AaaServer.profile.READ&
grant_type=device_request
You will also get better off with JSON set as a default for serialisation and content type just by using client.UseJson().
It maybe that Postman is following a redirect from your API endpoint as the functionality is different Postman verses RestSharp (possibly missing a trailing slash or similar).
Try adding
client.FollowRedirects = false;
to your RestSharp code and analyse the result.
I created an AWS API-gateway for an HTTP method PUT. When I do a test in API-gateway, that works fine, but when I call it from a REST client, I get 404 bad-request and missing authentication token errors. I didn't set any authorization to true or a required API key to true.
I passed these query parameters to a REST client:
auth_id : 8798iuyiu123123
time_stamp :1231231
test_json : [{"id"=>"1","value"=>"mount"},{"id"=>"2","value"=>"chart"}]
HEADER
content-type : application/json
When I change the test_json value to %5B%7B%22id%22:%221%22,%22value%22:%22test%22%7D,%7B%22id%22:%222%22,%22value%22:%2213+%D8%B4%D8%A7%D8%B1%D8%, then I get the response.
i am new to react, calling from react
Request.put('https://api-gateway.sqwdwed123.com/eretw/update-chart')
.set('Content-Type', 'application/json')
.query({ auth_id: localStorage.auth_id})
.query({ time_stamp:this.props.time_stamp})
.query({ test_json:JSON.stringify(newadd)})
should i pass this test_json through body?
Am I doing anything wrong?
This is usually related to requesting a URL that doesn't exist. Please make sure you're using the correct HTTP method and resource path to a valid resource (the sample invoke URL does not include any resource path). If this still doesn't work. Make sure you actually deployed your API.
The HTTP Response of Bad Request is because you have the Query Parameter that are not URL Encoded. There are 2 things that you can do now:
Pass the test_json as Query Param but making sure that they are URL Encoded. This will put a restriction on the size of the string and hence Not Recommended.
Pass the test_json as Request Body. (Recommended)
In my Apigee API Proxy, I need to get the environment URL that is defined in my configuration, so that I can send it as part of the response.
For example: http://myorg-test.apigee.net/pricing
However, when I try to get it using proxy.url, I get an aliased path, like http://rrt18apigee.us-ea.4.apigee.com/pricing
Currently, I'm trying to get it like:
var response = {
proxyUrl : context.getVariable("proxy.url"),
};
Here is a work around. You can try to get the following variables and create the entire URL
Get the request scheme (http or https) from request.Headers.X-Forwarded-Proto (if you are using cloud version) or client.scheme if you are using on-prem
Get the host name from request.host
Get the entire request path from request.path
Entire list of URL query params and list from message.querystring
You can then construct the entire request URL.
( I know this should not be this painful. Please log a bug in case proxy.url is really broken. )
I'm trying out http requests to download a pdf file from google docs using google document list API and OAuth 1.0. I'm not using any external api for oauth or google docs.
Following the documentation, I obtained download URL for the pdf which works fine when placed in a browser.
According to documentation I should send a request that looks like this:
GET https://doc-04-20-docs.googleusercontent.com/docs/secure/m7an0emtau/WJm12345/YzI2Y2ExYWVm?h=16655626&e=download&gd=true
However, the download URL has something funny going on with the paremeters, it looks like this:
https://doc-00-00-docs.googleusercontent.com/docs/securesc/5ud8e...tMzQ?h=15287211447292764666&\;e=download&\;gd=true
(in the url '&\;' is actually without '\' but I put it here in the post to avoid escaping it as '&').
So what is the case here; do I have 3 parameters h,e,gd or do I have one parameter h with value 15287211447292764666&ae=download&gd=true, or maybe I have the following 3 param-value pairs: h = 15287211447292764666, amp;e = download, amp;gd = true (which I think is the case and it seems like a bug)?
In order to form a proper http request I need to know exectly what are the parameters names and values, however the download URL I have is confusing. Moreover, if the params names are h,amp;e and amp;gd, is the request containing those params valid for obtaining file content (if not it seems like a bug).
I didn't have problems downloading and uploading documents (msword docs) and my scope for downloading a file is correct.
I experimented with different requests a lot. When I treat the 3 parameters (h,e,gd) separetaly I get Unauthorized 401. If I assume that I have only one parameter - h with value 15287211447292764666&ae=download&gd=true I get 500 Internal Server Error (google api states: 'An unexpected error has occurred in the API.','If the problem persists, please post in the forum.').
If I don't put any paremeters at all or I put 3 parameters -h,amp;e,amp;gd, I get 302 Found. I tried following the redirections sending more requests but I still couldn't get the actual pdf content. I also experimented in OAuth Playground and it seems it's not working as it's supposed to neither. Sending get request in OAuth with the download URL responds with 302 Found instead of responding with the PDF content.
What is going on here? How can I obtain the pdf content in a response? Please help.
I have experimented same issue with oAuth2 (error 401).
Solved by inserting the oAuth2 token in request header and not in URL.
I have replaced &access_token=<token> in the URL by setRequestHeader("Authorization", "Bearer <token>" )