Recently, i've been building and app which requires a scrollview, for all the content to fit. I've had a few difficulties creating my scrollview. I've tried a few different methods for building it, but ended up building it in storyboard with autolayout. I've set the height of the view controller to 1000, and therefore also the simulated size to freeform. The width of the content view inside the scrollview, I've to the same as the view which contains the scrollview.
The hierarchy goes like this:
-View controller scene
-Top layout guide
-Bottom layout guide
-View
-Scroll view
-Content view
-Label with text here
-Constraints
-And so on
I've been replicating the process in this link, to create the scrollview:
https://www.ralfebert.de/snippets/ios/auto-layout-recipes/uiscrollview-storyboard/
When running the application on the simulator, I get the following result:
The scrollview is not working properly on the iPad. It seems like the scrollview doesn't adapt to the changes in the width, which happens when its ran on an iPad, since it's bigger. When the app is ran on the iPad, the scrollview stays the same width as if it were shown on the iPhone.
This is how it looks in the editor. The view controller on the left is the view controller which has the scrollview implemented, and the one on the right doesn't. The first image shows the storyboard, when I view it with the iPhone 8, and the second image is when I view it with an 9,7" iPad:
It would be greatly appreciated if anyone could give me a hint to whats going on!
EDIT:
Left side is what it looks like, and right side is what it should look like:
Add the UIScrollView to your main view
Set Top, Left, Right, Bottom constraints all to Zero
Add a UILabel inside the scroll view
Set number of lines to Zero
Set Top, Left, Right, Bottom constraints all to Zero
Set the label's width constraint equal to the scroll view's width
That should do it :)
This will keep the label's text aligned to the top of the scroll view. If you add enough text to fill more than the full screen, it will scroll vertically.
I am a pretty new iOS developer and am coming across my first need for a scroll view. The page I need to design is a little complex. Since I was struggling to get that to layout correctly, I decided to create a super simple scene just so I could make sure I understood how to get UIScrollViews to work. Apparently it didn't help as things aren't working and I am stuck after following several tutorials.
I'm working in Xcode 8.1 and Swift 3.
Screenshots at the end of this post.
I have a scene that consists of a scrollview and a child view with two labels in it. I’ve set the labels to be ~700pt apart to try to make scrolling happen. Nothing scrolls and you can only see the first label. Additionally, the child view does not expand to be full height.
You can see in the screen shots that my scroll view has constraints to pin it to the sides of the superview.
The child view has the same.
The label constraints position them within the child view and 700pt from each other. I thought that this would give the views the height they need to make scrolling happen. There are no constraint errors.
I am hoping for the red childview to fill the vertical space and then scroll. At this point I’d take any layout as long as something was scrolling. Nothing is though, what do I not get?
Screenshots:
(removed due to link limit because I'm still a new SO user)
EDIT (6/12/16):
I've made some changes and gotten a little closer. Primarily, it was suggested to me elsewhere to set one of the labels to be equal height with the scroll view. This now gives me the "bounce" effect which means stuff is sort of scrolling; however, we're still only dealing with one screen of content as the second label which is hidden below is clipped off.
Here's where things stand:
edited hierarchy
edited screenshot
When you are using a UIScrollView in a storyboard, you need to ensure that the scroll view is able to compute the size of its content. If you don't have sufficient constraints then you will get an error in Interface Builder:
Scrollable Content Size Ambiguity
Clicking the Info icon on this error will advise you that there needs to be constraints touching all sides of the scroll view and to ensure that you can trace a continual line of constraints from left-to-right and top-to-bottom.
You can achieve this with or without the content view you have added. I will show you how to do it without the content view in scroll view, simply because there are fewer constraints that way and therefore less typing.
Add the scroll view to the root view
Constrain the top/left/top/bottom of the scroll view to its superview (the root view). Remember to turn off constrain to margins if you want the full width of the screen
Add label 1 and label 2 to the scroll view
Constrain top/leading/bottom of label 1 to the scroll view
Constrain top/trailing/bottom of label 2 to the scroll view
Constrain the trailing edge of label 1 to the leading edge of label 2 with 0 space
Constrain label 1 width to be equal to the width of the scroll view
Constrain label 1 height to be equal to the height of the scroll view
Constrain the width and height of label 2 to be equal to the width and height of label 1
There is no step 10 :)
ScrollViews are particular in that they like to know explicitly how much they are supposed to scroll. The best way I have found to handle this is to have the following hierarchy with some constraints:
-Scroll View
-Content View
-View (constrained to top, bottom, leading, trailing anchors)
-Your other views (e.g. Label)
By having one View living underneath the Content View and then containing all of your other Views within that View, the ScrollView then knows how much it's supposed to scroll (it just uses the size of the one child View) no matter how much stuff you have inside of the child View.
Let me see if I can snap a picture of an example from one of my projects. In the meantime, give this hierarchy a try and let me know if it works for you. You would probably constrain the Label to the top and leading anchors of the child View and then constrain the height to something taller than the screen (e.g. 1000 units).
Let me know if you have any questions.
Edit: Example hierarchy below
I am making an app that has a (child) View inside a Scroll View. I understand I have to explicitly set the child View's width since the Scroll View won't provide that information to the child, but how can I make this child View's width auto-adjust based on the width of the device?
For example, in the below I've set the width to 380 which centers the "Quotes" in iPhone 6, but makes them slightly right of center in iPhone 5.
You can use auto layout to set the width of your subView equal to your main View by performing a control drag from your subView to your main View like this:
Then select "Equal Widths" from the popup
Select viewController
Stretch the view you want full screen size to the size of the screen
Click the central icon from the three choices along the bottom of the window
You will an icon pop up
The top 4 values will have a dotted red line joining them
click them all
at the bottom of the pop up you will see 'add 4 constraints'
click this
Done!
You can delete the constraint for width. The view will place it self horizontally becuase of the leading and trailing space to superview. No need for a specific width.
I think your scrollview will be scrolling vertically so in that case you probably need to provide a constraint for the height or your view, and update scrollview contentsize accordingly to this.
Since your child view is located in the view hierarchy of your view controller's view you can assign constraints between your child view and your view controller's view.
Ctrl drag from your child view to your view controller's view. You will see option to set them to have equal widths. Select it. Then adjust the constant if you want the width of your child view to be lower.
You can then add leading and trailing constraints between your child view and your scroll view.
Doing it in this way will also ensure that you set the content width of you scroll view dynamically and correctly.
Let me know if it works for you
I'm setting constraints in IB like
But when i run the app on iPhone4 it shows
Why last three buttons not shown properly on iPhone4 screen?is there any mistake in my constraints ?
Edit:- This is my view hierarchy:-
UITabbarControlle -> UINavigationController -> UIViewController and tab bar controller is rootviewcontroller.
Edit:- FYI there is no effect of any constraints on the screen(basically autolayout not working for me).
You have designed the buttons on 4 inch and you don't have enough space on 3.5 for all of them.
One way to do this is to place scroll view over your view controller's view and add the buttons on the scroll view.You have to add constraint on the scroll view , to be fixed on each side (without width/height).
After that grab all the buttons and add constrains on each side and sizes , so they will be fixed
If you , on other hand, have enough space for all the buttons to fit in 3.5' without any top/bottom margins you can add the button in UIView (instead of scroll view). Place the buttons in the view and set fixed width/height on that view.Center the view and it will keep his size (with the buttons inside on both screen sizes)
There is an issue in your constraints, you have to update them.
You can do as is shown on the image bellow:
Once done, you will see, the Orange lines under your buttons turned to blue.
I wish that helps you!
Your view is probably within a UIScrollView which will extend your total contentheight. It is not related to the absolute height of your viewport.
However, what do you expect? Your 3 buttons would overlay to the next buttons, if your theoretical approach would work.
What you need to to do is to wire all buttons to each other and give the view a top and bottom constraint to the top and bottom layout. You probably need to adjust your view to be on full screen and not to extend to the bottom.
Hint: as long as something is 'yellow' you need to add further constraints.
I have a scroll view with content that is 1000px tall and would like to be able to lay it out for easy design on the storyboard.
I know it can be done programmatically but I really want to be able to see it visually. Every time I put a scroll view on a view controller it won't scroll. Is it possible to get it to work like I want or do I have to do it in the code?
I'm answering my own question because I just spent 2 hours to find the solution and StackOverflow allows this QA style.
Start to finish here is how to make it work in storyboard.
1: go to you view controller and click on Attribute Inspector.
2: change Size to Freeform instead of Inferred.
3: Go to the main view on that storyboard, not your scrollview but rather the top level view.
4: Click Size Inspector and set this view to your desired size. I changed my height to 1000.
Now you will see that you storyboard has your view setup so you can see the entire height of your scroll for easy design.
5: Drop on a scrollview and stretch it so it takes up the whole view. You should now have a scrollview with size of 320,1000 sitting on a view in your view controller.
Now we need to make it scroll and need to make it show content correctly.
6: Click on your scrollview and click on Identity Inspector.
7: Add a User Defined runtime attribute with KeyPath of contentSize then type of SIZE and put in your content size. For me it is (320, 1000).
Since we want to see our whole scroll view on the storyboard we stretched it and it has a frame of 320,1000 but in order for this to work in our app we need to change the frame down to what the visible scrollview will be.
8: Add a runtime attribute with KeyPath frame with Type RECT and 0,0,320,416.
Now when we run our app we will have a visible scrollview has a frame of 0,0,320, 416 and can scroll down to 1000. We are able to layout our subviews and images and whatnot in Storyboard just the way we want them to appear. Then our runtime attributes make sure to display it properly. All of this without 1 line of code.
Here are the steps with Auto Layout that worked for me on XCode 8.2.1.
Select Size Inspector of View Controller, and change Simulated Size to Freeform with height 1000 instead of Fixed.
Rename the view of View Controller as RootView.
Drag a Scroll View as subview of RootView and rename it as ScrollView.
Add constraints for ScrollView:
ScrollView[Top, Bottom, Leading, Trailing] = RootView[Top, Bottom, Leading, Trailing]
Drag a Vertical Stack View as subview of ScrollView and rename it as ContentView.
Add constraints for ContentView:
ContentView.height = 1000
ContentView[Top, Bottom, Leading, Trailing, Width] = ScrollView[Top, Bottom, Leading, Trailing, Width]
Select Attributes Inspector of ContentView, and change Distribution to Fill Equally instead of Fill.
Drag a View as subview of ContentView and rename it as RedView.
Set Red as the background of RedView.
Drag a View as subview of ContentView and rename it as BlueView.
Set Blue as the background of BlueView.
Select RootView, and click Update Frames button.
Update Frames is a new button in Xcode8, instead of Resolve Auto Layout Issues button. It looks like a refresh button, located in the control bar below the Storyboard:
View hierarchy:
RootView
ScrollView
ContentView
RedView
BlueView
View Controller Scene (Height: 1000):
Run on iPhone7 (Height: 1334 / 2):
Here are the steps that worked for me on iOS 7 and XCode 5.
Drag a ViewController (it comes with UIView "View").
1.1 Select "View Controller" and select "File Inspector" and uncheck "Auto layout".
Drag a ScrollView (as child of ViewController's UIView "View")
Select ScrollView and open "Identity Inspector".
Enter "contentSize" for keyPath. Select "Size" for Type. And Enter {320, 1000} for value.
Note: Step 4 is simply saying that the scroller contains some content whose size is 320x1000 units. So setting contentSize will make scroller work.
Select View Controller, Select "Attributes Inspector" then select Freeform from Size.
Note: step 5 will allow us to change the size of "View" that the view controller comes with.
Select "View" and then select "Size Inspector".
Set Width to 320 and height to 1000.
Note: 5, 6 & 7 is purely for us to see stretched or entire expanded view inside StoryBoard.
Note: Make sure to unselect "Auto Layout" on View Controller.
Your View hierarchy should look like:
After hours of trial and error, I've found a very easy way to put contents into scrollviews that are 'offscreen'. Tested with XCode 5 & iOS 7. You can do this almost entirely in Storyboard, using 2 small tricks/workarounds :
Drag a viewcontroller onto your storyboard.
Drag a scrollView on this viewController, for the demo you can leave its size default,
covering the entire screen.
Now comes trick 1 : before adding any element to the scrollView, drag in a regular 'view' (This view will be made larger than the screen, and will contain all the sub elements like buttons, labels, ...let's call it the 'enclosing view').
Let this enclosing view's Y size in the size inspector to for example 800.
Drop in a label onto the enclosing view, somewhere at Y position 200, name it 'label 1'.
Trick 2 : make sure the enclosing view is selected (not the scrollView !), and set its Y position to for example -250, so you can add an item that is 'outside' the screen
Drop in a label, somewhere at the bottom of the screen, name it 'label 2'. This label is actually 'off screen'.
Reset the Y position of the enclosing view to 0, you'll no longer see label 2, as it was positioned off screen.
So far for the storyboard work, now you need to add a single line of code to the viewController's 'viewDidLoad' method to set the scrollViews contents so it contains the entire 'enclosing view'. I didn't find a way to do this in Storyboard:
- (void)viewDidLoad
{
[super viewDidLoad];
self.scrollView.contentSize = CGSizeMake(320, 800);
}
You can try doing this by adding a contentSize keyPath as a size to the scrollView in the Identity Inspector and setting it to (320, 1000).
I think Apple should make this easier in storyboard, in a TableViewController you can just scroll offscreen in Storyboard (just add 20 cells, and you'll see you can simply scroll), this should be possible with a ScrollViewController too.
Getting Scrolling to work in iOS7 and Auto-layout in iOS 7 and XCode 5.
In addition to this: https://stackoverflow.com/a/22489795/1553014
Apparently, all we need to do is:
Set all constraints to Scroll View (i.e. fix scroll view first)
Then set distance-from-scrollView constraint to the bottom most item to scroll view (which is the super view).
Note: Step 2 will tell storyboard where the last piece of content lies within Scroll view.
For this example, I have unchecked the Autolayout feature of the Interface builder. And, I'm still using (for no reason at all) the relatively old 4.6.1 version of Xcode.
Start with a view controller that has a scroll view over it (the main view).
1: Add a Container View, from the Object Library, to the scroll view. Notice that a new view controller is added to the storyboard and it is linked to the view controller with the scroll view.
2: Select the container view and, on the Size Inspector, make it anchor to top and left without auto resizing.
3: Change its height to 1000. (1000 is used for this example. You should apply the value that you require.)
4: Select the new view controller and, from the Attributes Inspector, change Size to Freeform.
5: Select the view of the new view controller and, on the size Inspector, change the height to 1000 (which is equal to the container view's height).
6: For your test later, while still on the view of the new view controller, add a label at the top and at the bottom of the view.
7: Select the scroll view from the original view controller. On the Identity inspector, add an attribute with the keyPath set to contentSize, type set to Size, and value set to {320, 1000} (or your container view's size).
8: Run on the 4-inch iPhone Simulator. You should be able to scroll from the top label up to the bottom label.
9: Run on the 3.5-inch iPhone Simulator. You should be able to scroll from the top label up to the bottom label.
Remember that Xcode 4.6.1 can only build for iOS6 and below. Using this approach and building for iOS6, I am still able to achieve the same results when the app is run on iOS7.
Note that within a UITableView, you can actually scroll the tableview by selecting a cell or an element in it and scrolling up or down with your trackpad.
For a UIScrollView, I like Alex's suggestion, but I would recommend temporarily changing the view controller to freeform, increasing the root view's height, building your UI (steps 1-5), and then changing it back to the standard inferred size when you are done so that you don't have to hard code content sizes in as runtime attributes. If you do that you are opening yourself up to a lot of maintenance issues trying to support both 3.5" and 4" devices, as well as the possibility of increased screen resolutions in the future.
Disclaimer :- Only for ios 9 and above (Stack View).
If you are deploying your app on ios 9 devices use a stack view.
Here are the steps :-
Add a scroll view with constraints - pin to left, right, bottom, top (without margins) to superview (view)
Add a stack view with same constraints to scroll view.
Stack View Other Constraints :- stackView.bottom = view.bottom and stackView.width = scrollView.width
Start adding your views. The scroll view will decide to scroll based on the size of the stack view (which is essentially your content view)
Here's how to setup a scrollview using Xcode 11
1 - Add scrollview and set top,bottom,leading and trailing constraints
2 - Add a Content View to the scrollview, drag a connection to the Content Layout Guide and select Leading, Top, Bottom and Trailing. Make sure to set its' values to 0 or the constants you want.
3 - Drag from the Content View to the Frame Layout Guide and select Equal Widths
4 - Set a height constraint constant to the Content View
i wanna put my 5 cents to accepted answer:
i've been researching topic for 2 days and finally found a solution that i will be using always from now on
go up to item 4 in accepted answer and forget about adding attributes of frames and contentsizes and so on
to make everything automatic just use solution from this link
everything is clear, easy, elegant and works like a charm on ios 7. i'm pretty glad with all that lol
You should only set the contentSize property on the viewDidAppear, like this sample:
- (void)viewDidAppear:(BOOL)animated{
[super viewDidAppear:animated];
self.scrollView.contentSize=CGSizeMake(306,400.0);
}
It solve the autolayout problems, and works fine on iOS7.
Here is a simple solution.
Set the size attribute of your view controller in the storyboard to "Freeform" and set the size you want. Make sure it's big enough to fit the full content of your scroll view.
Add your scroll view and set the constraints as you normally would. i.e. if you wants the scroll view to be the size of your view, then attach your top, bottom, leading, trailing margins to the superview as you normally would.
Now just make sure there are constraints in the subviews of the scrollview that connect the top and bottom of the scroll view. Same for left and right if you have horizontal scrolling.
In iOS7 I found that if I had a View inside a UIScrollView on a FreeForm-sized ViewController it would not scroll in the app, no matter what I did. I played around and found the following seemed to work, which uses no FreeForms:
Insert a UIScrollView inside the main View of a ViewController
Set the Autolayout constraints on the ScrollView as appropriate. For me I used 0 to Top
Layout guide and 0 to Bottom layout Guide
Inside the ScrollView, place a Container View. Set its height to whatever you want (e.g. 1000)
Add a Height constraint (1000) to the Container so it doesn't resize. The bottom will be past the end of the form.
Add the line [self.scrollView setContentSize:CGSizeMake(320, 1000)]; to the ViewController that contains the scrollView (which you've hooked up as a IBOutlet)
The ViewController (automatically added) that is associated with the Container will have the desired height (1000) in Interface Builder and will also scroll properly in the original view controller. You can now use the container's ViewController to layout your controls.
Here's a bit of a grubby answer that get's to the same solution for vertical scroll views, but (against the ethos of stackoverflow) doesn't answer the question. Instead of using a scrollView, just use a UITableView, drag a normal UIView into the header, and make it as big as you want, you can now scroll the content in storyboard.
Apparently you don't need to specify height at all! Which is great if it changes for some reason (you resize components or change font sizes).
I just followed this tutorial and everything worked: http://natashatherobot.com/ios-autolayout-scrollview/
(Side note: There is no need to implement viewDidLayoutSubviews unless you want to center the view, so the list of steps is even shorter).
Hope that helps!
The key is the contentSize.
This is often missing and not indicated when adding a UIScrollView.
Select the UIScrollView and select the Identity Inspector.
Add a contentSize keyPath as a size to the scrollView in the Identity Inspector and setting it to (320, 1000).
Scroll away.
If you are using auto-layout than best approach is to use UITableViewController with static cells in storyboard.
I have also once faced the problem with a view that require much more scrolling so change the UIScrollView with above mentioned technique.