Related
Upon updating to Xcode 9 and in the "launching" phase of compilation on the simulator I get the error:
Failed to create IXPlaceholder for app bundle ID
Emphasis placed on this issue only occurs trying to launch the simulator, as working with my actual iPhone 6s launches without any issues .
Attempts:
Ensured info.plist "Bundle Identifier" is correct. it is "$(PRODUCT_BUNDLE_IDENTIFIER)"
Checked to see if typing the bundle identifier manually would work, but it did not.
Project Cleaned
Deleted Derived Data
Xcode relaunched
Computer Restarted
Xcode betas uninstalled
Xcode Uninstalled and Reinstalled
Provisioning Profile Expires in 11 months
Automatically Manage Signing is unchecked then checked again
Paid Developer for 2 years now and have never had this issue before. Searched online for a solution with no luck and notice only a couple others have had this issue with no clear resolution.
What direction should I take to get this issue resolved. I don't see anything wrong with the provisioning files / certificates, but I could be wrong if someone could guide me in the right direction.
Thank you
I had same problem, this solve it
In you Info.plist:
Bundle_display_name : Dictionary
set to String value not dictionary
Bundle_display_name : String
i hope this help you
These steps helped me to fix this problem. I found this solution in this article
The only solution I have come across to continue being able to test your application on the simulator is to download the Xcode 10.3.1 simulators and select those to test your app on.
Best of luck to those who come across this bug!
I think i found solution for this. It works for my case. I did two things:
First(i think this is what really helps) :
in targets -> general-> Display name i set proper "App name" (i got i grayed before like seted placeholder)
I tried to set ${PRODUCT_NAME} but i got issues with that (but i think you should try this too)
General Display Name
the in proper info.plist. In bundle name set the same proper "App name".
Same here.I tried to set ${PRODUCT_NAME} but i got issues with that (but i think you should try this too)
Info.plist Bundle Name
Second(but i'm pretty sure that was a coincidence) :
I have other project that doesn't have this issue and works fine on all ios versions and simulators.
In this project(that one which works fine) i set Bundle Identifier from project that doesn't works, but like i said im pretty sure that was only a coincidence
Setting Display Name should fix this. Also making sure your identifier doesn't have funny characters (e.g. -)
Targets > General > Display Name
in my case, after upgraded system, it is fixed automatically
Reinstall Xcode.
Copy Xcode.xip from download Directory into Application Directory.
Install it.
Open your project and run.
This question already has answers here:
Unable to run app in Simulator : An error was encountered while running (Domain = LaunchServicesError, Code = 0)
(19 answers)
Closed 5 years ago.
I received an error (Domain = LaunchServicesError, Code = 0) when trying to launch my app in the iOS Simulator with Xcode 6. I looked for solution in google, but I didn't find anything practical.
What does this error mean?
This error indicates that there was a problem with installation. Unfortunately, Xcode does not actually print the contents of the error message that would give you more insight, but you can look at ~/Library/Logs/CoreSimulator/CoreSimulator.log to see the rest of the error details. There will also be more information about the problem in the simulated device's system log (~/Library/Logs/CoreSimulator/[Device UDID]/system.log); look for messages from installd around the time of the error).
Common causes for this include bundles missing an Info.plist, missing keys within your bundle's Info.plist, or values for some keys in the Info.plist not being allowed.
If your app's Info.plist does not contain a valid CFBundleVersion key/value pair, it is possible that your app may install correctly the first time but fail to update. Many users seem to work around this by doing a "Reset Contents & Settings" after each install, but it would be better to fix the root cause by setting an appropriate CFBundleVersion in the Info.plist. I believe iOS 8.2 now correctly returns an error on the first install in this case rather than just on updates, so hopefully this problem will be more obvious now.
Users with home directories on file systems that do not support hard links (eg: network home directories via AFP, SMB, or some NFS servers) may also run into problems related to hard linking. If this is the case, I suggest you create a path on your local HFS+ filesystem for simulator development (eg: /var/simulator/[user]) and create a symlink to that path from ~/Library/Developer/CoreSimulator. This particular issue was fixed in one of the iOS 8.2 betas.
In another case, the Build&Run would always succeed on the first try, but subsequent attempts would sometimes fail due to a changed Info.plist (eg: because someone's build system settings result in CFBundleVersion being different on each iteration). You can usually recover by either deleting the installed app (using a long-press from the home screen or xcrun simctl uninstall [Device UDID] [app identifier]) or erasing the device back to a default state. To erase the device, execute xcrun simctl erase [Device UDID] from terminal or choose Erase Contents & Settings from the iOS Simulator menu. This particular issue was fixed in one of the iOS 8.2 betas.
A newer instance of this issue is occurring for Xcode 6.2 users. If you have a WatchKit App Extension bundled in your app, it will fail to install to versions of the iOS Simulator runtime older than iOS 8.2. As a workaround, you will need to manually disable the app extension from installing when you want to test with iOS 8.1 and earlier runtimes.
If you need more specific help, please provide the entirety of the error message from CoreSimulator.log and any messages from installd and CoreSimulatorBridge that appear around the same time in ~/Library/Logs/CoreSimulator/[Device UDID]/system.log as that will reveal the underlying problem.
Does your project include a widget or extension? If so, the problem could be the bundle identifier of your widget/extension. It should be the same as the main target, appended with a period and an extra string. So for example:
Main target: com.mycompany.myapp
Widget should be: com.mycompany.myapp.widget
I fixed it by resetting the simulator:
iOS Simulator > Reset Contents and Settings...
Since everyone writes what they went through and how they fixed their exact problem, that might be unhelpful.
The problem is that there are different causes for the same error message and the right way of solving it is to open up ~/Library/Logs/CoreSimulator/CoreSimulator.log and look in there for the last message. This message gives you a good clue and sets you on the right path of solving your problem (sometimes it's bundle IDs, sometimes it's a missing or an extra attribute in the Info.plist, but you always get a good, descriptive clue).
This is how you narrow down the problem and eventually get to fix it.
Good luck and tough nerves with Xcode .)
Z.
For me I just cleaned the project and it worked -> Product -> Clean
TLDR: Clear your Project Build Folder - and you will be free of this pain.
( plus I logged this as a bug with Apple as they need to find a way to fix this in Xcode )
None of these solutions worked for me - I banged my head against several walls.
I looked at the CoreSimulator log and I realised that it was trying to build a library that I had deleted.
I couldn't find references to it anywhere.
Then I saw via another SO Question which unfortunately I can't find to reference, if you:
Hold down your option key then Product-> Clean option becomes Clean
Build Folder
Press that and enjoy having your error vanish
"Reset Content and Settings" from iOS Simutalor menu options and launching simulator after Quitting solved my issue.
In XCode 6
An error was encountered while running (Domain = LaunchServicesError,
Code = 0)
I had this error after making some major code changes to accommodate the iPhone 6 Screens. in Xcode 6 (iOS8)
I followed the options above and found that the only way to really get this fixed was by doing the following:
Deleted the derived data [go to Window >> Organizer >> (Find your App) Click on Delete next to the Derived Data]
Product >> Clean
Reset Contents and Settings in Simulator
Changed the Bundle Version to 1.4.1 from 1.4 in pList
Thank you for all the previous answers that got me to this stage. It worked a charm!
In my case, the error was caused because i didn't set the build id.
Setting this, launches the emulator without problem.
One other thing to try, that worked for me, after resetting the simulator and doing a clean build did not help, is clearing out the derived data. To do this: go to Organizer click on project click on delete derived data button. I had this happen after working on an extension for a while and went back to the regular branch. Hope this helps.
This is what caused the problem for me: the build number for the main app and the extension were different (I had incremented the main app build number to 1.0.1.03, but left the extension at 1.0.1.02).
Making them match fixed the problem for me.
Open the Console app and look there. In my case it told me exactly what to do. I saw:
ErrorDescription=WatchKit 2 app extension's NSExtension.NSExtensionAttributes.WKAppBundleIdentifier value does not match WatchKit app's bundle ID (found "com.myCompany.MyApp.MyApp.watchkitapp"; expected "com.myCompany.MyApp.watchkitapp").
So, I went to each plist and checked any items that related to a BundleID. Then Clean, relaunch, etc.
My case was about framework compilation. I have enabled the 'copy only when installing' option from Target- Build Phases- Embedded Frameworks-
I have an app that is set up to use different bundle IDs based on the build configuration. When creating my Apple Watch extension, Xcode generated everything using my Release ID, so I had to go through and change it all manually for debugging. Here's all the places I had to change it:
WatchKit Extension's Build Settings -> Packaging -> Product Bundle Identifier
WatchKit Extension's Info.plist -> NSExtension -> NSExtensionAttributes -> WKAppBundleIdentifier (this needs to use the same prefix as your companion app)
WatchKit App's Info.plist -> WKCompanionAppBundleIdentifier
The last one took me a while since the WatchKit App's Info doesn't show up as a tab when viewing the target settings, I had to go direct to the Info.plist file itself.
Try putting some number into [TARGETS]-[General]-[Identity]-[Version(or Build)], if they are empty.
It worked for me.
I hope it will help you.
I also have this error. In my case the log ~/Library/Logs/CoreSimulator/CoreSimulator.log was something like that :
Could not hardlink copy /Users/myUser/Library/Developer/CoreSimulator/Devices/60E569E7-6750-428A-A401-841BB081xxxx/data/Containers/Bundle/Application/70F24DDC-7954-46BF-B799-F807FD98yyyy/myApp.app to /Users/myUser/Library/Developer/CoreSimulator/Devices/60E569E7-6750-428A-A401-841BB081xxxx/data/Library/Caches/com.apple.mobile.installd.staging/temp.kOrJ9G/extracted/Payload/myApp.app with manifest /Users/myUser/Library/Developer/CoreSimulator/Devices/60E569E7-6750-428A-A401-841BB081xxxx/data/Library/Caches/com.apple.mobile.installd.staging/temp.kOrJ9G/extracted/com.apple.deltainstallcommands.com.mycompagny.myapp
thanks to this answer In look at my app info.plist. the key CFBundleVersion was missing so I add it and now everything is working !
None of the above worked for me, but this did:
I simply deleted IceCream.xcworkspace/xcuserdata/xcuserdatad and then reset the simulator and ran the app again. (Reseting the simulator alone, did not work for me.)
"Reset Content and Settings" from iOS Simutalor menu options and launching simulator after Quitting solved my issue.
The great explanation by Jeremy at least set me in the right direction, but despite having all the bundle identifiers and versions set correctly, the error still persisted. I then checked the Apple documentation which shows that the WatchKit extension (in its Copy Bundle Resources phase) copies the WatchKit app. This WatchKit app was named exactly the same as my iOS app, causing Xcode to confuse the two and read out the wrong plist, thinking the bundle identifier was incorrect. Renaming the Product of the WatchKit app to something distinct finally solved it for me.
If you've changed your bundle ID, make sure you do a clean build before trying to build it again! See how here: How to Empty Caches and Clean All Targets Xcode 4
So it's definitelly .plist problem. In my case it was empty NSExtensionMainStoryboard, removing this property fixed the problem
I had this error whilst trying to build Apple's Lister Xcode Project and run it on the simulator.
The essentials which fixed it for me were:
1) BundleID for the iOS App and the iOS Extension had to be different
2) I provide iCloud and App Groups for both targets
3) I used Xcode's "Fix Issue" to fix the issues
After that I could build and run the app without warnings or errors.
The clue from the log file was "... LegacyErrorString=DuplicateIdentifier, FunctionName=-[MIInstallableBundle performPreflightWithError:], SourceFileLine=450, NSLocalizedDescription=The parent bundle has the same identifier (com.ACMECompany.Lister) as sub-bundle at /Users/stephen/Library/Developer/CoreSimulator/Devices/5329928B-946B-40A4-B666-EFD11B96D11F/data/Library/Caches/com.apple.mobile.installd.staging/temp.HQ5d9X/extracted/Lister.app/PlugIns/Lister.appex"
Had a wrong app version set in InfoPlist.strings localization file. Urgh!
An hour gone!
Delete your simulator and regenerate one.
It works for me.
I removed the key in watch app's .plist file that shouldn't have been there. And the problem disappeared.
This worked for me:
In project settings -> General tab -> Identity section I changed the Version number from something like 2.0.2 (three digits) to 2.0 (two digits) then I deleted the app in the simulator and run the project again. No more error after that.
One other possible solution to add to all of the others that will no doubt stay above mine ;)
I deleted & later reinstated a Today Extension target retaining the source files, but after trying every solution under the sun, I realised it didn't have any sources or resources in its target! You might encounter this as well if your detailed launch services error can't find your compiled app extension file.
So, long story short, make sure your target has something included to compile or bundle in there. You can check your target memberships by selecting the relevant file(s) on your project navigator (on the left) and setting your checkmark(s) as appropriate in the file inspector (that's the first tab on the right).
I had the following in my log...
<Error>: Error Domain=LaunchServicesError Code=0 "(null)" UserInfo={Error=ExecutableTwiddleFailed...
This was due to there being no source files added in the extension project.
This error was showing up on my system when there was no hard disk space available. I freed up some space on my system for it to work.
My Problem was that the wrapper extension for the target project was unset.
To fix I had to go to target project -> build settings -> Packaging -> Wrapper Extension.
Set this to "app" (No quotes)
This fixed the problem for me
I added a vanilla Today Application Extension and run with the new scheme created by XCode.
After it finishes building ("Build Succeeded" pops up), it failed straight away with this error:
Installation Failed
Invalid argument
I've been trying to find answers for 6 hours now, no luck so far.
Please help!
Check if the Bundle Identifier isn't empty in the Info.plist
Try this:
Quit Xcode
Clean out ~/Library/Developer/Xcode/DerivedData manually
rm -rf "$(getconf DARWIN_USER_CACHE_DIR)/org.llvm.clang/ModuleCache"
iOS Simulator > Reset Content and Settings
Maybe you are bundling a conflicting "contents" referenced (blue) folder.
Hint: change the name of said "contents" folder :)
This issue occurred in my case when the phone's memory was too low to install the app. I've cleaned up the phone and voila!
Another hint might be this post.
This can also happen in Xcode 7 because "Upgrade to recommended settings" will change CFBundleIdentifier to point to $(PRODUCT_BUNDLE_IDENTIFIER) instead of the old $(BUNDLE_IDENTIFIER).
Apple says in the Xcode 7 release notes that PRODUCT_BUNDLE_IDENTIFIER is now "the recommended place to set the Bundle Identifier for a target." So if you're using BUNDLE_IDENTIFIER anyplace else in your project, be sure to change it to PRODUCT_BUNDLE_IDENTIFIER to keep things in sync.
I was getting the same error - although in different conditions - and it took me a while to realise that I had inadvertently messed with the Info.plist (thank you user2866588!) via a Search & Replace operation.
Once fixed that file, the error went away. It's a long shot, but you never know...
I got this error when my test phone had low memory (around 288MB free). After restart and clearing some cached data, I was able to install my app.
Image description here.!! I got this Error Just Enter Bundle Identifier. (You can get bundle identifier by right click on info.plist and go to Open as than Source Code here just find this CFBundleURLSchemes below this name a string tag contains your bundle identifier) Copy Bundle identifier and past it on TARGET select General now on Identity you will see Bundle Identifier paste there and enter. then just run the code. Happy Coding!!!
What I found is that info.plist file should never been localized! I tried to localize my project and tried to tap Localization on all plist and string files. As a result, I could not install my app to Simulator, invalid argument error.
I spent 1.5 days trying to find out reason. I tried all the solutions as listed above, but with no luck. Finally, discard all my localization changes and redo it again. This time, I tried to localize one file first, and then compiled codes and trie to run my app on Simulator.
The issue is info.plist file. You could localize it. The result is that en version is moved en.lproj folder. That is to say, no more info.plist file in the project folder. As a result, Xcode could not find it and exception raised.
Another way to verify it is to check your project settings. Select your target and general tab. The Identity should be like:
If your project settings are something like this, you have to locate info.plist, that means info.plist is missing.
You just cannot locate localized info.plist in en.lproj folder from project settings.
Don't localize info.plist file directly. You can localize it by localizing infoplist.strings file.
This may be one of reasons to get invalid argument exception, as in my case.
I also wrote a blog on this.
I got the same issue and it was because of low memory on phone.
I deleted some apps and restarted the phone which brought by available storage.
I got this error after installing new pods (AWS) to my project. Somehow the entry in the Build Settings for Info.plist file was cleared. Entering the correct filepath (find in finder) my project finally compiled again.
After successfully compiling the project in Xcode 6, I am unable to run it in the simulator with the above mentioned message. I did all the possible research, tried everything and still no advances.
I am not working with swift, neither I use widgets or extensions, so please do not suggest solutions caused by these as can be seen in similar questions.
If someone found a possible cause (or solution!!) other than these, please help. Thanks
"Reset Content and Settings" from iOS Simutalor menu options and launching simulator after Quitting solved my issue.
Cleaning the build folder resolved the issue for me.
(While holding down the Alt-key: Product > Clean build folder)
I tried every other solution listed here. Well, I ported my project from Swift 1.2 to Swift 2.0. The application was stuck even after a lot debugging and launch services error 0 was reported.
solution: It happens because of framework compilation.
App target -> Build Phases -> Embed Frameworks.
So mark copy only when installing on. Clean the project and run it!
This has now been resolved. The problem was caused by ShareKit library added by CocoaPods for compatibility reasons. After removing the library and all related code, the app successfully launched in simulator. I recommend checking the system log for more details on the issue as to me it pointed me in the right direction (stating the name of conflicting library).
In case anyone has this problem in combination with cocoa pods, these steps helped me to solve this error (after few hours):
run pod cache clean
from SRC_ROOT run rm -rf Pods (optionally rm Podfile.lock)
Click on the Simulator app, click Simulator -> Reset Content and Settings...
Go into Xcode, In the Menu bar click Product -> Clean (or click Shift + Command + K).This will to clean your Xcode project.
Create a new Terminal Shell (From menu bar click Shell -> New Window)
run rm -rf ~/Library/Developer/Xcode/DerivedData/
...then try to Build & Run your project.
Note:
SRC_ROOT can be found by entering the Navigator, clicking on the project, clicking on the project again from the project and targets list, going into Build Settings, scrolling all the way to the bottom to the User-Defined Section, and the SRC_ROOT will be labeled as PODS_ROOT. Take that and copy it verbatum into the Terminal and proceed with step 2 from the list above.
Hope it helps.
I get rid from the issue by the given steps for simulator
1. Way
Reset Content and Settings of Simulator.
Clean your project by Cmd+Shift+K.
Clear your Derived Data.
The last one which is more important change your Bundle Identifier by "com.yourcompanyname.projectname" like "com.facebook.Facebook"
2. Way
You can do only be the given line, it works for me
The last one which is more important change your Bundle Identifier by "com.yourcompanyname.projectname" like "com.facebook.Facebook"
Thanks and enjoy programming.
Might be related to this issue: "This app contains an app extension with an illegal bundle identifier" issue
I had to format the bundle identifiers for my app and extension as follows:
com.company.AppName
com.company.AppName.Extension
First "Reset Content and Settings"
If you didn't fill the build number and fill it and Run.
It's solved for me.
If you change the name of the supplied class InterfaceController set by default when you start a new project. This class is referenced in the Info.plist under the key RemoteInterfacePrincipalClass. In my case, I got the error mentioned by the OP until I fixed the name of the class in there (see screenshot).
If you are here after having issues doing an integration with WatchOS 2.0, go to - ~/Library/Logs/CoreSimulator/[Device UDID]/system.log and if says something like WatchKit 2 app has frameworks; that's not allowed. then follow the link below.
http://zyafa.me/blog/watchos-2-and-embedded-frameworks
Thanks for pointing this out #Miki and kudos to you. I had the same issue as you yesterday (and I added ShareKit 3.0.0 from CocoaPods to the app a few days ago). I suspected ShareKit giving me this problem, but now I can be confident of exactly which library is causing this. Here is what I found in my log (if it can benefit others):
Error Domain=LaunchServicesError Code=0 "The operation couldn’t be
completed. (LaunchServicesError error 0.)" UserInfo=0x7fa836097aa0
{Error=PackageInspectionFailed, ErrorDescription=Failed to load
Info.plist from bundle at path
/Users/{UserName}/Library/Developer/CoreSimulator/Devices/99FEB34E-6F00-4EFA-861A-A6985AFE96D8/data/Library/Caches/com.apple.mobile.installd.staging/temp.X7eead/extracted/{AppName}.app/Frameworks/LiveSDK.framework}
I'm adMob user and I solved enabling "Copy only when installing" in App target -> Build Phases -> Embed Frameworks.
Have the same problem after localizing my app. Especially Info.plist. Seems I had empty CFBundleShortVersionString in InfoPlist.strings, after fixing that the simulator started to work properly.
I got this issue by adding a folder reference named "Resources".
If I give it another name, then it runs !
There are a number of things that can cause this error. The best general answer is to search the console log for CoreSimulator, as the simulator logs the underlying problem when it displays this message.
If you have installed any libraries using CocoaPods while XCode was open, all you have to do is, Close XCode and remove the library from Pod file, run the command pod install it will uninstall that library. then install library again. Please make sure that XCode is always closed while installing and uninstalling libraries.
I hade exactly the same problem and it was ShareKit.
On the simulator I had "Error Domain=LaunchServicesError Code=0".
On the iPhone6 device I had "App installation failed Could not inspect the application package."
When I removed ShareKit it worked.
I had this problem when I added an Apple Watch target to my app, and accidentally removed the InterfaceController.m file. Adding back the file in the target fixed the problem.
There are different things that can cause this. Looking in the console may well give you a clue.
In my case - the issue was an extension built before I changed the name of the product. Xcode didn't clear the old one out, then got stressed at two extensions with the same bundle id.
(Deleting the build folder fixed my particular issue).
In my case the issue came from an icon set added with some images missing. Once I replaced the icon set with another one, and uninstalled the app in the simulator; I was able to run it again.
I removed all my pod files and replaced them all, seems the problem for me was the bolts framework was old, and causing this error. I did a clean & reset content and now it's all good.
Do not add the google maps framework to the embedded lib section this solved my build break.
I had this error in developing app for Apple Watch after adding in Info.plist: "App Transport Security Settings" and "Allow Arbitry Loads" = YES. (In WatchKit App, in WatchKit Extension is good!!)
Deleting this two rows, it keeps working.
For me, the problem occurs because I added my framework (GoogleMobileAds.framework in my case) to Embedded Binaries, not Linked Frameworks and Libraries.
For your information, AdMob instructs you to use Add Files to "Your Project" menu on Xcode, but I was too lazy to obey the instruction.
I had this problem when trying to run UI tests in a project containing AWS Cognito.
Here's how I resolved it.
Select the UI test target.
Click on the Build Phases section.
Click the plus to add a Copy Files phase
In the Copy Files phase, change the destination to Frameworks (see the last image)
Hit the plus below the Copy Files phase.
Select the framework for which you're receiving an error and hit the Add button (yours will probably not be the first item in your project hierarchy).
It should end up looking like this.
Repeat steps 5 and 6 for all frameworks giving you an error.
Run your tests.
This question already has answers here:
Unable to run app in Simulator : An error was encountered while running (Domain = LaunchServicesError, Code = 0)
(19 answers)
Closed 5 years ago.
I received an error (Domain = LaunchServicesError, Code = 0) when trying to launch my app in the iOS Simulator with Xcode 6. I looked for solution in google, but I didn't find anything practical.
What does this error mean?
This error indicates that there was a problem with installation. Unfortunately, Xcode does not actually print the contents of the error message that would give you more insight, but you can look at ~/Library/Logs/CoreSimulator/CoreSimulator.log to see the rest of the error details. There will also be more information about the problem in the simulated device's system log (~/Library/Logs/CoreSimulator/[Device UDID]/system.log); look for messages from installd around the time of the error).
Common causes for this include bundles missing an Info.plist, missing keys within your bundle's Info.plist, or values for some keys in the Info.plist not being allowed.
If your app's Info.plist does not contain a valid CFBundleVersion key/value pair, it is possible that your app may install correctly the first time but fail to update. Many users seem to work around this by doing a "Reset Contents & Settings" after each install, but it would be better to fix the root cause by setting an appropriate CFBundleVersion in the Info.plist. I believe iOS 8.2 now correctly returns an error on the first install in this case rather than just on updates, so hopefully this problem will be more obvious now.
Users with home directories on file systems that do not support hard links (eg: network home directories via AFP, SMB, or some NFS servers) may also run into problems related to hard linking. If this is the case, I suggest you create a path on your local HFS+ filesystem for simulator development (eg: /var/simulator/[user]) and create a symlink to that path from ~/Library/Developer/CoreSimulator. This particular issue was fixed in one of the iOS 8.2 betas.
In another case, the Build&Run would always succeed on the first try, but subsequent attempts would sometimes fail due to a changed Info.plist (eg: because someone's build system settings result in CFBundleVersion being different on each iteration). You can usually recover by either deleting the installed app (using a long-press from the home screen or xcrun simctl uninstall [Device UDID] [app identifier]) or erasing the device back to a default state. To erase the device, execute xcrun simctl erase [Device UDID] from terminal or choose Erase Contents & Settings from the iOS Simulator menu. This particular issue was fixed in one of the iOS 8.2 betas.
A newer instance of this issue is occurring for Xcode 6.2 users. If you have a WatchKit App Extension bundled in your app, it will fail to install to versions of the iOS Simulator runtime older than iOS 8.2. As a workaround, you will need to manually disable the app extension from installing when you want to test with iOS 8.1 and earlier runtimes.
If you need more specific help, please provide the entirety of the error message from CoreSimulator.log and any messages from installd and CoreSimulatorBridge that appear around the same time in ~/Library/Logs/CoreSimulator/[Device UDID]/system.log as that will reveal the underlying problem.
Does your project include a widget or extension? If so, the problem could be the bundle identifier of your widget/extension. It should be the same as the main target, appended with a period and an extra string. So for example:
Main target: com.mycompany.myapp
Widget should be: com.mycompany.myapp.widget
I fixed it by resetting the simulator:
iOS Simulator > Reset Contents and Settings...
Since everyone writes what they went through and how they fixed their exact problem, that might be unhelpful.
The problem is that there are different causes for the same error message and the right way of solving it is to open up ~/Library/Logs/CoreSimulator/CoreSimulator.log and look in there for the last message. This message gives you a good clue and sets you on the right path of solving your problem (sometimes it's bundle IDs, sometimes it's a missing or an extra attribute in the Info.plist, but you always get a good, descriptive clue).
This is how you narrow down the problem and eventually get to fix it.
Good luck and tough nerves with Xcode .)
Z.
For me I just cleaned the project and it worked -> Product -> Clean
TLDR: Clear your Project Build Folder - and you will be free of this pain.
( plus I logged this as a bug with Apple as they need to find a way to fix this in Xcode )
None of these solutions worked for me - I banged my head against several walls.
I looked at the CoreSimulator log and I realised that it was trying to build a library that I had deleted.
I couldn't find references to it anywhere.
Then I saw via another SO Question which unfortunately I can't find to reference, if you:
Hold down your option key then Product-> Clean option becomes Clean
Build Folder
Press that and enjoy having your error vanish
"Reset Content and Settings" from iOS Simutalor menu options and launching simulator after Quitting solved my issue.
In XCode 6
An error was encountered while running (Domain = LaunchServicesError,
Code = 0)
I had this error after making some major code changes to accommodate the iPhone 6 Screens. in Xcode 6 (iOS8)
I followed the options above and found that the only way to really get this fixed was by doing the following:
Deleted the derived data [go to Window >> Organizer >> (Find your App) Click on Delete next to the Derived Data]
Product >> Clean
Reset Contents and Settings in Simulator
Changed the Bundle Version to 1.4.1 from 1.4 in pList
Thank you for all the previous answers that got me to this stage. It worked a charm!
In my case, the error was caused because i didn't set the build id.
Setting this, launches the emulator without problem.
One other thing to try, that worked for me, after resetting the simulator and doing a clean build did not help, is clearing out the derived data. To do this: go to Organizer click on project click on delete derived data button. I had this happen after working on an extension for a while and went back to the regular branch. Hope this helps.
This is what caused the problem for me: the build number for the main app and the extension were different (I had incremented the main app build number to 1.0.1.03, but left the extension at 1.0.1.02).
Making them match fixed the problem for me.
Open the Console app and look there. In my case it told me exactly what to do. I saw:
ErrorDescription=WatchKit 2 app extension's NSExtension.NSExtensionAttributes.WKAppBundleIdentifier value does not match WatchKit app's bundle ID (found "com.myCompany.MyApp.MyApp.watchkitapp"; expected "com.myCompany.MyApp.watchkitapp").
So, I went to each plist and checked any items that related to a BundleID. Then Clean, relaunch, etc.
My case was about framework compilation. I have enabled the 'copy only when installing' option from Target- Build Phases- Embedded Frameworks-
I have an app that is set up to use different bundle IDs based on the build configuration. When creating my Apple Watch extension, Xcode generated everything using my Release ID, so I had to go through and change it all manually for debugging. Here's all the places I had to change it:
WatchKit Extension's Build Settings -> Packaging -> Product Bundle Identifier
WatchKit Extension's Info.plist -> NSExtension -> NSExtensionAttributes -> WKAppBundleIdentifier (this needs to use the same prefix as your companion app)
WatchKit App's Info.plist -> WKCompanionAppBundleIdentifier
The last one took me a while since the WatchKit App's Info doesn't show up as a tab when viewing the target settings, I had to go direct to the Info.plist file itself.
Try putting some number into [TARGETS]-[General]-[Identity]-[Version(or Build)], if they are empty.
It worked for me.
I hope it will help you.
I also have this error. In my case the log ~/Library/Logs/CoreSimulator/CoreSimulator.log was something like that :
Could not hardlink copy /Users/myUser/Library/Developer/CoreSimulator/Devices/60E569E7-6750-428A-A401-841BB081xxxx/data/Containers/Bundle/Application/70F24DDC-7954-46BF-B799-F807FD98yyyy/myApp.app to /Users/myUser/Library/Developer/CoreSimulator/Devices/60E569E7-6750-428A-A401-841BB081xxxx/data/Library/Caches/com.apple.mobile.installd.staging/temp.kOrJ9G/extracted/Payload/myApp.app with manifest /Users/myUser/Library/Developer/CoreSimulator/Devices/60E569E7-6750-428A-A401-841BB081xxxx/data/Library/Caches/com.apple.mobile.installd.staging/temp.kOrJ9G/extracted/com.apple.deltainstallcommands.com.mycompagny.myapp
thanks to this answer In look at my app info.plist. the key CFBundleVersion was missing so I add it and now everything is working !
None of the above worked for me, but this did:
I simply deleted IceCream.xcworkspace/xcuserdata/xcuserdatad and then reset the simulator and ran the app again. (Reseting the simulator alone, did not work for me.)
"Reset Content and Settings" from iOS Simutalor menu options and launching simulator after Quitting solved my issue.
The great explanation by Jeremy at least set me in the right direction, but despite having all the bundle identifiers and versions set correctly, the error still persisted. I then checked the Apple documentation which shows that the WatchKit extension (in its Copy Bundle Resources phase) copies the WatchKit app. This WatchKit app was named exactly the same as my iOS app, causing Xcode to confuse the two and read out the wrong plist, thinking the bundle identifier was incorrect. Renaming the Product of the WatchKit app to something distinct finally solved it for me.
If you've changed your bundle ID, make sure you do a clean build before trying to build it again! See how here: How to Empty Caches and Clean All Targets Xcode 4
So it's definitelly .plist problem. In my case it was empty NSExtensionMainStoryboard, removing this property fixed the problem
I had this error whilst trying to build Apple's Lister Xcode Project and run it on the simulator.
The essentials which fixed it for me were:
1) BundleID for the iOS App and the iOS Extension had to be different
2) I provide iCloud and App Groups for both targets
3) I used Xcode's "Fix Issue" to fix the issues
After that I could build and run the app without warnings or errors.
The clue from the log file was "... LegacyErrorString=DuplicateIdentifier, FunctionName=-[MIInstallableBundle performPreflightWithError:], SourceFileLine=450, NSLocalizedDescription=The parent bundle has the same identifier (com.ACMECompany.Lister) as sub-bundle at /Users/stephen/Library/Developer/CoreSimulator/Devices/5329928B-946B-40A4-B666-EFD11B96D11F/data/Library/Caches/com.apple.mobile.installd.staging/temp.HQ5d9X/extracted/Lister.app/PlugIns/Lister.appex"
Had a wrong app version set in InfoPlist.strings localization file. Urgh!
An hour gone!
Delete your simulator and regenerate one.
It works for me.
I removed the key in watch app's .plist file that shouldn't have been there. And the problem disappeared.
This worked for me:
In project settings -> General tab -> Identity section I changed the Version number from something like 2.0.2 (three digits) to 2.0 (two digits) then I deleted the app in the simulator and run the project again. No more error after that.
One other possible solution to add to all of the others that will no doubt stay above mine ;)
I deleted & later reinstated a Today Extension target retaining the source files, but after trying every solution under the sun, I realised it didn't have any sources or resources in its target! You might encounter this as well if your detailed launch services error can't find your compiled app extension file.
So, long story short, make sure your target has something included to compile or bundle in there. You can check your target memberships by selecting the relevant file(s) on your project navigator (on the left) and setting your checkmark(s) as appropriate in the file inspector (that's the first tab on the right).
I had the following in my log...
<Error>: Error Domain=LaunchServicesError Code=0 "(null)" UserInfo={Error=ExecutableTwiddleFailed...
This was due to there being no source files added in the extension project.
This error was showing up on my system when there was no hard disk space available. I freed up some space on my system for it to work.
My Problem was that the wrapper extension for the target project was unset.
To fix I had to go to target project -> build settings -> Packaging -> Wrapper Extension.
Set this to "app" (No quotes)
This fixed the problem for me