I'm currently working with an example from Raywenderlich: UISearchController-Tutorial (The finished project is at the end of their article or here) and I noticed that when I execute a search and click on one of the results, during the push transition, the UISearchController disappears. It's visible on this video: here
Before selecting a result
During the transition to the new VC
I run this example with Xcode 10, iOS 12 (sim: iPhone 8)
Any idea / pointer would be deeply appreciated
Cheers.
Its default in iOS12. Just look at the Apple-Mail App. There it is the same. Actually you dont need the searchbar, when you are showing another VC
I currently have multiple views open as children to my navigation controller through the method navigation controller.push(). When you rotate the device it automatically goes back all the way to the root view controller, as if you called poptorootview().
I am wondering why it is doing this and how to stop this from happening. I have not modified UINavigationController class in any way.
Thank you!
In case anyone else is looking for any workaround .I had this really annoying issue in iOS 11.1 only but everything was looking good in iOS 10 and below.
Finally I got it fixed by updating my Xcode to 9.2 and the problem has been disappeard, still I have no idea what caused that, but it take 3 days to me to get rid of it!
I have been working on this app for months now and from as far back as I can remember I have never had an issue with segues. The code is unchanged in terms of calling performSegueWithIdentifier but since my recent update to Xcode 7 and iOS 9 I have not been able to tack this issue.
I have tried:
Deleting button and creating new button w/ segue link
Using a direct segue from button to view, without the use of performSegueWithIdentifier
Connecting button to new blank viewController
When I press the button, no initial load functions are called on the destination VC (Ex: ViewDidLoad, ViewWillAppear, etc). When I connect it to a blank view, the segue works fine with the same code in place.
Since the code never stops, or breaks, and just seems to "freeze" in place while still running on Xcode I can't seem to even narrow this down to whats causing the issue. I have a similar segue that is also called from another button on the same ViewController that has no issues whatsoever.
Any thoughts on the matter are greatly appreciated!
EDIT: I have narrowed the issue down to the UITextView's causing the problem. Once the Text Views were removed the page loads fine via segue. I wonder what changed between iOS 8 and iOS 9 in terms of UITextView as I will have to remove the text views and completely re add new text views.
So basically the segue was freezing because of the UITextView's I was using in the destinationViewController. The following fixed the issue:
Delete all UITextView's
Add new UITextView's
you must leave the default lorem imposed text and change this programmatically in the viewDidLoad()
This was the fix for me, and from the research I have done on the issue it seems this is a bug in iOS 9 and Xcode 7.
Cheers!
NOTE: Removing the text in the UITextView (or making it longer then ~12 characters) is sufficient to work around it, no need to delete and recreate them. This is fixed in Xcode 7.1.1 and later.
I ran into the same issue and the fixes in this post (Xcode 7 crash: [NSLocalizableString length] 30000) solved the issue for me.
The first is to enable a localisation other than the base for the storyboard (see https://stackoverflow.com/a/32688815/3718974)
The second is to turn off the base localisation (see https://stackoverflow.com/a/32719247/3718974)
I think I have the same problem: I have a UITabelView with cells created from a nib file, when a user tap a cell this method is called:
and when I have the following method prepareForSegue:: the application crashes:
if I delete the line 129 Everything is ok , the method prepareForSegue:: open the right view and the label contactName is shown with its default text.
If I modify the method as follows prepareForSegue:: get exactly what you expect, without having any type of error:
let me know if you also get the same result
Any one who is facing this issue, i solved it by turning off the "Optimize rendering for windows scale" option in Debug of simulator window. I already had tried all of the above answers but could not solve the issue.
In the method in the first viewController where you activate the segue, do you have beginIgnoringInteractionEvents anywhere? If so the screen you segue to will be frozen and will ignore interaction events like you describe. If this is the case you can fix this by adding an endIgnoringInteractionEvents method before your segue method:
UIApplication.sharedApplication().endIgnoringInteractionEvents()
self.performSegueWithIdentifier("editItemToMyGearSegue", sender: self)
I realize this is an old topic, but appears to be still relevant. I was facing the same problem in Xcode 9, iOS11. My UITextViews are embedded inside UITableViewCells. Same symptoms as described here. The tricks with default text and placeholders did nothing for me, but I solved it by turning off the scrolling indicators for the text view in the xib. They were on by default, I guess, though unused.
Edit: this is probably an important detail... the views that were hanging all had an image NSTextAttachment in the attributed string of the text view. I think the image was wider than the available table cell content. With scrolling turned off, they appear to downscale.
I have an UITableView with three dynamic rows. When displaying the UITableViewController the first time everything works fine. After a rotation the rows which have a data in it get an indentation despite I set setLayoutMargins to zero. I cannot reproduce this issue in another project until now. It is only appearing in iOS 8 but but only on one table. The same source for the table is working in a test project without problems. The only difference here is that it is in a container with some other views.
I checked auto layout constraints, the rotation methods, commented things out - all without success. The change of the indentation occurs between willRotateToInterfaceOrientation and didRotateToInterfaceOrientation or after viewWillTransitionToSize. I even updated to iOS 8.1 with the same results.
Has someone expeerienced a similar behavior?
PS:
What I've also noticed that when setting the layout margins to zero on iOS 8 the animation is not as smooth as it would be with the default values (with indentation). On iOS 7 the animation is always smooth.
EDIT:
I tracked some things down. If a UITableViewController is embedded into an UINavigationController the indentation happens on rotation. If you rotate further it goes back to it's set indentation (no indentation in my case).
If the UITableViewController is embedded into a container (and this container is in a navigation controller) than after the rotation the cell get it's default indentation back. If you rotate further this behavior stays the same (always indented).
Are some events not send to the child view controller or none of you uses a UITableViewController embedded into an UINavigationController?
In my opinion it is a iOS 8 Bug or a Xamarin Bug. Perhaps one other could verify if it is the same with his installation. I'm using Xamarin Studio 5.5.2 with Xcode 6.1.
One ugly solution to this is this:
public override void DidRotate (UIInterfaceOrientation fromInterfaceOrientation)
{
base.DidRotate (fromInterfaceOrientation);
// otherwise cells are indented! iOS 8 Bug?
TableView.ReloadData ();
}
One could use reloadData or reloadSection in didRotateFromInterfaceOrientation, despite it is a deprecated function. But there is no viewDidTransitionToSize and I also have to support iOS 7.
Edit:
Another solution I have come up with is to draw a custom separator line. This only works for iOS 8 and would answer the question (despite I've another issue on iOS 7 where this approach doesn't help).
I have a UIViewController subclass called FLProfileViewController that contains a UICollectionView. The view of FLProfileViewController is added as a subview to another UIViewController's view. The problem is that the UICollectionView doesn't render.... only if I execute the code from XCode 5 (final release). Even when running the same project from XCode 5 DP 6, the UICollectionView is rendered.
What is more, another instance of the same class is actually rendered when adding its view to a different UIViewController of the project.
Debugging the code, I see that numberOfSectionsInCollectionView: is called and returns 1, collectionView:numberOfItemsInSection: is called and returns 47.
But collectionView:cellForItemAtIndexPath: and collectionView:layout:sizeForItemAtIndexPath: are not being called.
Has anyone find a similar problem? Any ideas about what could be going on?
I have found the problem.
My UICollectionView is shown in the first screen of the app. To avoid showing it empty I have a fake app splash screen that extends the default one. The fake splash is shown with presentViewController:animated:completion: and doesn't disappear until I receive the data from the server.
The problem seems to be that with the final released version of the iOS7 SDK, the UICollectionView is not rendered if it is not visible to the user. In my case I was rendering the UICollectionView while the fake splash screen was still on top.
As I said, my solution worked in iOS6, and the iOS7 version shipped with XCode 5 DP 6.
Anyway, this might help someone else.