I initially ran a migration when I created the database and everything worked fine. Then I went and deleted the table in postgresql manually. Now when I run rake db:migrate, it runs but doesn't create the table.
It depends on what your migrations do. rake db:migrate can create or change tables, depending on your definitions. To setup the database and the tables in the beginning you can use rake db:schema:load or rake db:setup. rake -T gives an overview over all available rake tasks.
Database migrations are stored in the table schema_migrations which has one column version. As long as the version of the migration in question can be found here, the migration is not executed again.
Related
I'm currently following the ruby on rails tutorial: http://guides.rubyonrails.org/getting_started.html.
I am trying to save data into the database. However, when I run: rails server I get the following error:
Migrations are pending. To resolve this issue, run: bin/rake db:migrate RAILS_ENV=development
I've looked at the other articles and when I run:
bin/rake db:migrate
I get a rake aborted!
After running:
rake db:abort_if_pending_migrations....
I see that:
You have 1 pending migration:
20150805200129 CreateDatabases
SQLite3::SQLException: table "databases" already exists:
and it just tells me to run rake db:migrate to start again.
It seems that it already exists. Is there a way to cancel the pending migration?
Sometimes, even dropping a local development database is not a good idea.
There are better ways to delete/destroy a specific migration in your Rails application.
You could use rails d migration command to destroy a particular migration:
rails d migration MigrationName
To undo the changes corresponding to a particular migration, you can use db:migrate:down method like this:
rake db:migrate:down VERSION=XXX
Sometimes, things could get more messy and in those situation another handy thing is to take a look at the schema_migrations table in your database which has all the migrations with their version saved in it.
You can delete a particular migration from this table like this:
delete from schema_migrations WHERE version = VERSION;
if you don't want that migration to be present anymore.
Your migration may have failed midway (so it created the table, but didn't finish).
You are just using development environment, so it's okay to just drop the database and rebuild it from scratch:
rake db:drop # THIS WILL DELETE YOUR DATABASE
rake db:create
rake db:migrate
If you are like me and maintain your database structure outside of Rails, you can just delete the migration file from db/migration. I got the error in the OP's question when I used the rails generate command to create a model class, forgetting that it also creates a migration file.
Do not use this method if you rely on Rails to maintain your database structure!
I keep my Rails structure file up to date by building it from the database using:
bundle exec rake db:structure:dump
I do not encourage to drop the database and start from the beginning especially when you already have the data inside the database.
My approach to this will be migrate first, then rollback. After that you can safely delete the migration file. So the procedure is as following.
rails db:migrate
rails db rollback
rm db/migrate/your_last_migration_file.rb
You can recreate database and run all migrations in your development environment with such command
rails db:migrate:reset
If you want to revert the wrong migrations, You can drop the whole db using this:
rake db:drop
Then remove the migrations file manually(This wont corrupt the db when you recreate as the Schema migrations would be dropped as well).
Then run
rake db:migrate
And if there is data to be seeded, then run this as well
rake db:setup
I recently started using Rails, and created a few Models using the CLI which in turn created some migrations.
I ran the rake db:migrate command after adding all my columns in there, and then realized that I'd left out the associations.
So what did I do?
I went ahead and edited the migrations to include those keys.
I ran rake db:migrate again, and nothing changed in the schema.
Then I ran rake db:reset and then rake db:setup.
When that didn't work, I deleted my schema.rb (the darn thing wouldn't get updated!) and tried recreating it. When I realized that didn't work, I dropped the database, and killed the schema.
Now I'm stuck with some manually modified migrations, no schema.rb and no database.
How do I get the modified migrations to generate a schema, and play nice with Rails?
In development it does not matter to drop and rebuild your database. I do it often and I even have a rake task for that. The 3 command to chain are:
rake db:drop
rake db:create
rake db:migrate
# And a 4rth optional command to rebuild your test database
rake db:test:prepare
With this you should be good
Next time you need to modify a migration manually after migrating it, you should process by:
rake db:rollback
edit your migration
rake db:migrate
Following those steps will save you some headaches
Bonus info:
After you deployed your migration to your production server you cannot manually modify it, hence you must write another migration that will perform the modification (adding columns, etc...)
Due to some deployment issues I stopped tracking schema.rb in git. Somehow I have stuffed this up and somewhere along the way my schema.rb file has disappeared.
Is there a way of regenerating schema.rb from the database or from the migrations? I would prefer not to lose the existing data.
If you run a rake -T it will list all possible rake tasks for your Rails project. One of them is db:schema:dump which will recreate the schema.rb for the Rails app from the database.
bundle exec rake db:schema:dump
Careful,
rake db:schema:dump
will dump the current DB schema FROM the DB. This means that if you made any changes to your migrations, they will NOT be reflected in schema.rb file which is not what you want IMO.
If you want to re-create the schema from the migrations, do the following:
rake db:drop # ERASES THE DATABASE !!!!
rake db:create
rake db:migrate
RAILS 5 Way:
rails db:schema:dump
or if you Encounter Gem::LoadError then:
bundle exec rails db:schema:dump
Note:
in rails 5 it is recommended that task are generated/executed by using rails instead of rake, this is just to remember, rails generated task are of extension .rake see in lib/tasks/myTask.rake. which means these task can also be executed by prepending rake.
rake db:schema:dump
I think this is still valid in Rails 3 - it regenerates the schema.rb from the database.
Directly from the schema.rb file itself:
If you need to create the application database on another
system, you should be using db:schema:load, not running all the migrations
from scratch. The latter is a flawed and unsustainable approach (the more migrations
you'll amass, the slower it'll run and the greater likelihood for issues).
So do NOT do the suggestion of rake db:migrate, which was suggested in the - at the time of this writing - lowest rated answer.
If you regenerate schema.rb locally, you should be alright. It simply holds a representation of the structure of your database tables. The data itself is not contained in this file.
To regenerate your schema.rb file, run:
bundle exec rake db:schema:dump
Then simply commit the new schema.rb file and you should be in good shape!
I also had a similar problem where my old schema was not refreshing even if I deleted migration.
So, what I did was dropping all existing tables in the database and migrating them again. Then running "db:schema:load" command gave me a fresh schema.rb.
drop table my_table_name // deleted them individually
rake db:migrate
rake db:schema:dump // re-created a new schema
I have created a migration file for creating a table UserDetails in my db.. and it was working fine b4...
Unknowingly I deleted that table to do some modification .. But now when i gave
rake db:migrate .. its not creating the table ..
I have the migration file .. BUt when i give rake db:migrate its not creating.. How to do so ??
Rails maintains a 'schema_migrations' table to know what migrations have already run and will not run the migrations that have already been completed. Since, you had already run the migration once, it would have updated the 'schema_migrations' table with the version no. of the migration. You can do rake db:rollback to revert the last migration run or rake db:migrate:down VERSION=<version_number> to revert any migration that was run before.
Now, I suggest if you know the version no (Time stamp of the file), you can manually delete from 'schema_migrations' table and re-run db:migrate.
Rake stores the time of the most recent migration inside the database - if the migration you're trying to run is older than that, it won't run with rake db:migrate.
I don't know how to run a specific migration manually, sorry :/
Could you just run that specific migration as stated in the Guides. http://guides.rubyonrails.org/migrations.html#being-specific
I have run specific migrations by their timestamp before. It seems like it would work in this situation also.
I tried to run:
rake db:migrate VERSION=0
It reverts all migrations except the last one.
Then I tried to run:
rake db:migrate:down VERSION=<timestamp_of_last_migration>
but it didn't revert either. Why ?
Is there a command that runs all down methods at once ?
If your database only related to this project, and you are trying to undo everything in your migrations, I'd simply drop the database, and then run rake db:create.
Then you have an empty database ready to go.
Or is there another reason you're trying to run the down scripts?
You could check this list.
Maybe this could help you
rake db:create[:all]: If :all not specified then create the database defined in config/database.yml for the current RAILS_ENV. If :all is specified then create all of the databases defined in config/database.yml.
rake db:fixtures:load: Load fixtures into the current environment's database. Load specific fixtures using FIXTURES=x,y
rake db:migrate [VERSION=n]: Migrate the database through scripts in db/migrate. Target specific version with VERSION=n
rake db:migrate:redo [STEP=n]: (2.0.2) Revert the database by rolling back "STEP" number of VERSIONS and re-applying migrations.
rake db:migrate:reset: (2.0.2) Drop the database, create it and then re-apply all migrations. The considerations outlined in the note to rake db:create apply.
rake db:reset: Drop and re-create database using db/schema.rb. The considerations outlined in the note to rake db:create apply.
rake db:rollback [STEP=N]: (2.0.2) Revert migration 1 or n STEPs back.
rake db:schema:dump: Create a db/schema.rb file that can be portably used against any DB supported by AR
rake db:schema:load: Load a schema.rb file into the database
rake db:sessions:clear: Clear the sessions table
rake db:sessions:create: Creates a sessions table for use with CGI::Session::ActiveRecordStore
rake db:structure:dump: Dump the database structure to a SQL file
rake db:test:clone: Recreate the test database from the current environment's database schema
rake db:test:clone_structure: Recreate the test databases from the development structure
rake db:test:prepare: Prepare the test database and load the schema
rake db:test:purge: Empty the test database
there is another way:
rake db:rollback STEP=100
this will revert last 100 migrations
taken from http://guides.rubyonrails.org/migrations.html#rolling-back
try:
rake db:migrate:down VERSION=<timestamp_of_first_migration>
this will run the self.down for your first migration, essentially wiping everything out. at least, it just did for me!