While I'm trying to install Githubdesktop.exe, I am facing error as "Installation has failed.There was an error while installing the application.Check the setup log for more information".And the error log was as follows:
2017-09-18 07:31:14> Program: Starting Squirrel Updater: --install .
2017-09-18 07:31:15> Program: Starting install, writing to C:\Users\SAMEER\AppData\Local\SquirrelTemp
2017-09-18 07:31:15> Program: About to install to: C:\Users\SAMEER\AppData\Local\GitHubDesktop
2017-09-18 07:31:15> CheckForUpdateImpl: Couldn't write out staging user ID, this user probably shouldn't get beta anything: System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Users\SAMEER\AppData\Local\GitHubDesktop\packages.betaId'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
at System.IO.StreamWriter.CreateFile(String path, Boolean append, Boolean checkHost)
at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize, Boolean checkHost)
at System.IO.File.InternalWriteAllText(String path, String contents, Encoding encoding, Boolean checkHost)
at System.IO.File.WriteAllText(String path, String contents, Encoding encoding)
at Squirrel.UpdateManager.CheckForUpdateImpl.getOrCreateStagedUserId()
2017-09-18 07:31:15> CheckForUpdateImpl: Failed to load local releases, starting from scratch: System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Users\SAMEER\AppData\Local\GitHubDesktop\packages\RELEASES'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
The most likely cause of this message is simple: Github Desktop will only run on 64 bit systems. There's a long thread in the issues directory that discusses (among other things) why the error message isn't more clear, but the crux is that the message is generated by Squirrel, which the Github Desktop developers don't directly control.
But -- when all is said and done -- the Github Desktop download page could make it a bit more obvious that the app only works under 64 bit systems. I had to dig to find out that was the case.
Related
I'm implementing CI/CD for my application through TFS 2015, Windows server 2012 R2. My CI pipeline is success and my Release failed with error
The specified path, file name, or both are too long. The fully
qualified file name must be less than 260 characters, and the
directory name must be less than 248 characters.
I tried with both VSBuild and MSBuild task in Release pipleine, still the same issue.Find the error log
2018-12-01T14:39:03.3631640Z Downloading artifact from file share: \\xxxxxxxx\xxxxxxxxxxxx\drop
2018-12-01T14:40:42.8336659Z ##[section]Error: System.IO.PathTooLongException: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
2018-12-01T14:40:42.8346665Z at System.IO.Path.LegacyNormalizePath(String path, Boolean fullCheck, Int32 maxPathLength, Boolean expandShortPaths)
2018-12-01T14:40:42.8346665Z at System.IO.Path.InternalGetDirectoryName(String path)
2018-12-01T14:40:42.8356644Z at Microsoft.TeamFoundation.Release.Windows.Implementation.FileSystem.WriteStreamToFile(Stream stream, String filePath)
2018-12-01T14:40:42.8356644Z at Microsoft.TeamFoundation.Release.ArtifactRepository.FileShare.FileShareArtifact.DownloadArtifact(ArtifactDefinition artifactDefinition, String dropLocation, String localFolderPath)
2018-12-01T14:40:42.8356644Z at Microsoft.TeamFoundation.Release.ArtifactRepository.Build.BuildArtifact.DownloadArtifact(BuildArtifact buildArtifact, ArtifactDefinition artifactDefinition, String localFolderPath, BuildHttpClient buildClient, Int32 buildId)
2018-12-01T14:40:42.8366844Z at Microsoft.TeamFoundation.Release.ArtifactRepository.Build.BuildArtifact.Download(ArtifactDefinition artifactDefinition, String localFolderPath)
2018-12-01T14:40:42.8366844Z at Microsoft.TeamFoundation.Release.ArtifactRepository.Common.AgentArtifactDownloader.Download(ArtifactDefinition artifactDefinition, Uri workingFolder)
2018-12-01T14:40:42.8366844Z at Microsoft.TeamFoundation.DistributedTask.Plugin.Release.ReleaseJobExtension.<>c__DisplayClass19_1.<DownloadArtifacts>b__1()
2018-12-01T14:40:42.8376646Z at Microsoft.TeamFoundation.Release.Windows.Implementation.RetryExecutor.Execute(Action action)
2018-12-01T14:40:42.8376646Z at Microsoft.TeamFoundation.DistributedTask.Plugin.Release.ReleaseJobExtension.DownloadArtifacts(ITaskContext downloadArtifactTaskContext, IJobContext context, IList`1 agentArtifactDefinitions, Uri artifactsWorkingFolder, String teamProjectId, IDictionary`2 savedSettings)
2018-12-01T14:40:42.8376646Z at Microsoft.TeamFoundation.DistributedTask.Plugin.Release.ReleaseJobExtension.DownloadArtifactsWrapper(IJobContext context, IJobRequest job, CancellationToken cancellationToken, ITaskContext downloadArtifactTaskContext, String teamProjectId, Uri artifactsWorkingFolder, Int32 releaseId, IDictionary`2 savedSettings)
2018-12-01T14:40:42.8456644Z ##[error]The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
Any help would be appreciated.
Microsoft has released fix for this long path issue. Please find the post here in Developer community.
According to this, need to download latest version of Visual studio.
I am trying to run a service fabric project in visual studio 2015.
The following service fabric dependencies has been installed in the machine.
Microsoft Azure Service Fabric 5.6.210.9494
Microsoft Azure Service Fabric SDK 2.6.210.9494
Microsoft azure Service Fabric tools for Visual studio 1.6.50508.2
The project is getting build successfully. But while running the project the following error is occurring. The same dll is present in the machine. Please Help.
Could not load file or assembly 'Autofac.Integration.ServiceFabric' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'Autofac.Integration.ServiceFabric' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Autofac.Integration.ServiceFabric' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = Autofac.Integration.ServiceFabric
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: Autofac.Integration.ServiceFabric | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/A/MVCApp/WebApp/
LOG: Initial PrivatePath = C:\A\MVCApp\WebApp\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\A\MVCApp\WebApp\web.config
LOG: Using host configuration file: C:\Users\xxt\Documents\IISExpress\config\aspnet.config
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/c767d98c/be7d29af/Autofac.Integration.ServiceFabric.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/c767d98c/be7d29af/Autofac.Integration.ServiceFabric/Autofac.Integration.ServiceFabric.DLL.
LOG: Attempting download of new URL file:///C:/A/MVCApp/WebApp/bin/Autofac.Integration.ServiceFabric.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'Autofac.Integration.ServiceFabric' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +36
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +152
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection) +77
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +21
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +38
[ConfigurationErrorsException: Could not load file or assembly 'Autofac.Integration.ServiceFabric' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +738
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +217
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +170
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +92
System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +290
System.Web.Compilation.BuildManager.ExecutePreAppStart() +157
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +549
[HttpException (0x80004005): Could not load file or assembly 'Autofac.Integration.ServiceFabric' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +10044672
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +95
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +254
Try to run this command on PM Console:
Install-Package Autofac.Integration.ServiceFabric
Note: If you want to completely remove the old Autofac.Integration.ServiceFabric references, you can remove them from Manage NuGet Packages>Installed Packages menu and then remove the related lines from packages.config file in your project. After that it will not comeback again during building of the project.
In one of our products we retrieve data from the Oracle database using stored procedures using the ODP.net managed driver.
Every now and then (roughly every 1000 queries) we get the following exception:
(ORA-12570: Network Session: Unexpected packet read error)
---> Oracle.ManagedDataAccess.Client.OracleException: ORA-12570: Network Session: Unexpected packet read error
---> OracleInternal.Network.NetworkException: ORA-12570: Network Session: Unexpected packet read error
---> System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values.
Parameter name: size
at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags, SocketError& errorCode)
at OracleInternal.Network.ReaderStream.ReadIt(OraBuf OB, Int32 len)
--- End of inner exception stack trace ---
at OracleInternal.Network.ReaderStream.ReadIt(OraBuf OB, Int32 len)
at OracleInternal.Network.ReaderStream.WaitForReset()
at OracleInternal.Network.OracleCommunication.Reset()
at OracleInternal.TTC.TTCExecuteSql.ReceiveExecuteResponse(Accessor[]& defineAccessors, Accessor[] bindAccessors, Boolean bHasReturningParams, SQLMetaData& sqlMetaData, SqlStatementType statementType, Int64 noOfRowsFetchedLastTime, Int32 noOfRowsToFetch, Int32& noOfRowsFetched, Int64& queryId, Int32 longFetchSize, Int32 initialLOBFetchSize, Int64[] scnFromExecution, Boolean& bAllPureInputBinds, DataUnmarshaller& dataUnmarshaller, MarshalBindParameterValueHelper& marshalBindParamsHelper, Boolean bDefineDone, Boolean& bMoreThanOneRowAffectedByDmlWithRetClause)
--- End of inner exception stack trace ---
at Oracle.ManagedDataAccess.Client.OracleException.HandleError(OracleTraceLevel level, OracleTraceTag tag, Exception ex)
at OracleInternal.TTC.TTCExecuteSql.ReceiveExecuteResponse(Accessor[]& defineAccessors, Accessor[] bindAccessors, Boolean bHasReturningParams, SQLMetaData& sqlMetaData, SqlStatementType statementType, Int64 noOfRowsFetchedLastTime, Int32 noOfRowsToFetch, Int32& noOfRowsFetched, Int64& queryId, Int32 longFetchSize, Int32 initialLOBFetchSize, Int64[] scnFromExecution, Boolean& bAllPureInputBinds, DataUnmarshaller& dataUnmarshaller, MarshalBindParameterValueHelper& marshalBindParamsHelper, Boolean bDefineDone, Boolean& bMoreThanOneRowAffectedByDmlWithRetClause)
at OracleInternal.ServiceObjects.OracleCommandImpl.ExecuteNonQuery(String commandText, OracleParameterCollection paramColl, CommandType commandType, OracleConnectionImpl connectionImpl, Int32 longFetchSize, Int32 lobPrefetchSize, OracleDependencyImpl orclDependencyImpl, Int64[]& scnFromExecution, OracleParameterCollection& bindByPositionParamColl, Boolean& bBindParamPresent, Boolean isFromEF)
at Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteNonQuery()
It seems like ODP.net is calling System.Net.Sockets.Socket.Receive with an invalid size parameter (<=0 or greater than the length of buffer minus the value of the offset parameter).
The exception cannot be reproduced manually and is never raised while executing different procedures with different parameters (ie it's random).
Configuration:
ODP.net managed driver version: 4.121.1.0
.net framework 4.5
Oracle server version: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 (Linux)
Has anyone already experienced this issue? Are there any fixes available?
Thanks in advance!
After opening a ticket with the Oracle support, they sent an unofficial updated version of the managed ODP.net library which seems to fix the issue.
Hopefully the fix should be part of the next ODAC release (the latest available today is from Oct 2015).
If you see this error in your application, it's probably due to the same bug in the managed ODP.net library, not the way you use it.
Another thing to consider is if something in the network infrastructure could interrupt idle tcp/ip connections during the execution of long requests as described in this SO answer.
After reading through a similar question at ODP.NET Oracle.ManagedDataAcess random ORA-12570 errors, it seems like it's actually a pooling problem. Apparently the answer is to either set Pooling=false in the Connection String, or to find out just how many threads can be opened and how long the connection can be open before it becomes too much for Oracle to handle. This was the answer the author of that question posted:
To find the best configuration with pooling enabled I created a test application to start 50 threads (each one doing 1 test each 50ms), and decreased the default pool values until the error stoped. This way I was able to get an optimal configuration, stable, without any errors.
Obviously it does not applies to every server, but this is my final connection string configuration:
Pooling=true;Min Pool Size=1;Connection Lifetime=180;Max Pool Size=50;Incr Pool Size=5
The application is working well in Win server 2003 /IIS 6.0 environment.
When I move the code to win server 2008/IIS 7.0 , I am getting below error? Could you advise what is the error cause? Did i missed anything?
Server Error in '/' Application.
Arithmetic operation resulted in an overflow.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.OverflowException: Arithmetic operation resulted in an overflow.
Stack Trace:
[OverflowException: Arithmetic operation resulted in an overflow.]
System.IntPtr.ToInt32() +37
CoreLab.Common.a.a(Delegate A_0) +1935
CoreLab.Oracle.ab.a(OracleConnection A_0) +214
CoreLab.Oracle.OracleConnection.Open() +375
MonsterWorldwide.iTime.DataAccess.TimecardDA.GetTimecardPageInfoSet(Int32 personId, Int32 pageNumber, Int32 rowsPerPage, Int32& rowsCountTotal) in c:\inetpub\wwwroot\mtitimeproduction\dataaccess\timecardda.cs:28
MonsterWorldwide.iTime.BusinessLogic.TimecardBL.GetTimecardPageInfoSet(Int32 personId, Int32 pageNumber, Int32 rowsPerPage, Int32& rowsCountTotal) in c:\inetpub\wwwroot\mtitimeproduction\businesslogic\timecardbl.cs:24
MonsterWorldwide.iTime.WebGUI.WebParts.TimecardList.LoadData() in c:\inetpub\wwwroot\mtitimeproduction\webgui\webparts\timecardlist.ascx.cs:112
MonsterWorldwide.iTime.WebGUI.WebParts.TimecardList.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\mtitimeproduction\webgui\webparts\timecardlist.ascx.cs:52
System.Web.UI.Control.OnLoad(EventArgs e) +132
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Control.LoadRecursive() +191
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
Version Information: Microsoft .NET Framework Version:2.0.50727.4952; ASP.NET Version:2.0.50727.4927
[OverflowException: Arithmetic operation resulted in an overflow.]
System.IntPtr.ToInt32() +37
CoreLab.Common.a.a(Delegate A_0) +1935
CoreLab.Oracle.ab.a(OracleConnection A_0) +214
This looks like some poorly written unmanaged interop code which doesn't take into account the CPU type and which blows when run in a x64 bit OS. In a 64-bit OS pointers are 64-bit integers contrary to 32 bit OS.
Maybe you should check the documentation of this CoreLab.Common component you are using whether it supports 64-bit systems.
Quote from the documentation of the IntPtr.ToInt32 method:
OverflowException: On a 64-bit platform, the value of this instance is too large or too small to represent as a 32-bit signed integer.
I am stuck with my web application. As known from the title its a ASP.NET MVC(1,0) application so i do the only 2 things that a needed do deploy a application like this. I made a build an copied it to the IIS Folder. In the IDE (VS2008) all works fine :(.
This worked a long time. But know i get a error for my included dll of a other project.
(I have a German version so the Error is Translated from google sry for that)
BadImageFormatException: File or assembly 'DataService.WebInterface.BusinessLogic "or one of its dependencies was not found. An attempt was made to load a file with an incorrect format.]
System.Reflection.Assembly._nLoad (AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark & stackMark, throwOnFileNotFound Boolean, Boolean forIntrospection) +0
System.Reflection.Assembly.InternalLoad (AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark & stackMark, Boolean forIntrospection) +416
System.Reflection.Assembly.InternalLoad (String String assemblyName, Evidence assemblySecurity, StackCrawlMark & stackMark, Boolean forIntrospection) +166
System.Reflection.Assembly.Load (String string assemblyName) +35
System.Web.Configuration.CompilationSection.LoadAssemblyHelper (String assemblyName, Boolean starDirective) +190
What does that mean? Is the File corrupted or do i have to change the web.config?
Thank your for your support!
This could mean that the project was targeted to different platform (x86/x64) than the server environment. Change the target platform in VS to match your server before publishing.
Apart from that there is a setting in iis manager in application pools -> advance settings named "Enable 32-Bit Applications" - change it to "True" if you use 32b bit assemblies (or native assemblies) on 64 bit environment.