I am trying to install MySQL using Homebrew.
➜ ~ brew install mysql
==> Downloading https://cdn.mysql.com/Downloads/MySQL-5.7/mysql-boost-5.7.19.tar.gz
Already downloaded: /Users/youri/Library/Caches/Homebrew/mysql-5.7.19.tar.gz
==> cmake . -DCMAKE_C_FLAGS_RELEASE=-DNDEBUG -DCMAKE_CXX_FLAGS_RELEASE=-DNDEBUG -DCMAKE_INSTALL_PREFIX=/usr/local/Cellar/mysql/5.7.19 -DCMAKE_
load: 2.07 cmd: cmake 67907 running 1.22u 1.81s
load: 1.98 cmd: ruby 69196 running 0.03u 0.00s
load: 1.98 cmd: ruby 69218 running 0.01u 0.00s
load: 1.98 cmd: ruby 69236 running 0.02u 0.00s
load: 1.98 cmd: make 69256 running 0.00u 0.00s
load: 1.98 cmd: clang 69273 running 0.04u 0.01s
load: 1.98 cmd: ruby 69291 running 0.00u 0.00s
==> make
Why doesn’t Homebrew select a bottled version of mysql instead of building it from source?
Edit: i am using High Sierra last beta
There can be two reasons why you don’t get a bottle:
You use a custom prefix and the formula doesn’t support it
The formula doesn’t have a bottle for your OS
You fall in the second case: Homebrew doesn’t provide bottles for High Sierra. mysql.rb only has bottles for Sierra, El Capitan, and Yosemite.
Related
I have the Nvidia NVML Driver/library version mismatch error, for which I recommend reading the following answers:
https://stackoverflow.com/a/67105064/1782553
https://stackoverflow.com/a/71672261/1782553
However, after purging and re-installing the nvidia packages (necessary because of the issue described here), I still get the error. A reboot resolved the issue but I'd like to understand why?
Also, I'm not sure I understand the meaning of the 4 following commands and the Nvidia version they display.
Before reboot
$ cat /sys/module/nvidia/version
515.65.01
$ cat /proc/driver/nvidia/version
NVRM version: NVIDIA UNIX x86_64 Kernel Module 515.65.01 Wed Jul 20 14:00:58 UTC 2022
GCC version: gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)
$ dkms status
nvidia, 515.65.07, 5.4.0-131-generic, x86_64: installed
$ modinfo nvidia | grep ^version
version: 515.65.07
After reboot
$ cat /sys/module/nvidia/version
515.65.07
$ cat /proc/driver/nvidia/version
NVRM version: NVIDIA UNIX x86_64 Kernel Module 515.65.07 Thu Sep 22 00:22:12 UTC 2022
GCC version: gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)
$ dkms status
nvidia, 515.65.07, 5.4.0-131-generic, x86_64: installed
$ modinfo nvidia | grep ^version
version: 515.65.07
I understand there's a difference between the loaded driver version and the driver version that will be loaded after next reboot, but I would have guessed that the modinfo version would match the cat /proc/... version, or that the dkms version would match the cat /sys/... version, but they don't…
Could someone make a brief summary of what each command is reading?
I am relatively new to Arch Linux.
So i have been dealing with this issue for quite a long time now. I got this new RTL8188FTV wireless USB network adapter and i have tried installing the drivers for it with Paru AUR helper. The installation seems to fail, as it throws this error at the end :
==> ERROR: Missing 5.15.70-1-lts kernel modules tree for module 8188fu/r112.89d7288.
I can confirm the wireless adapter is functional, since it works on Windows
Package Name: 8188fu-kelebek333-dkms-git
Is there a way to install this "kernel modules tree" so i could finish the installation?
Thanks!
Edit: back with more errors
Building module:
Cleaning build area...
'make' all KVER=6.0.5-arch1-1.............(bad exit status: 2)
Error! Bad return status for module build on kernel: 6.0.5-arch1-1 (x86_64)
Consult /var/lib/dkms/8188fu/r113.f5df53d/build/make.log for more information.
error: command failed to execute correctly
:: Running post-transaction hooks...
(1/3) Arming ConditionNeedsUpdate...
(2/3) Install DKMS modules
==> dkms install --no-depmod 8188fu/r113.f5df53d -k 6.0.5-arch1-1
Error! Bad return status for module build on kernel: 6.0.5-arch1-1 (x86_64)
Consult /var/lib/dkms/8188fu/r113.f5df53d/build/make.log for more information.
==> WARNING: `dkms install --no-depmod 8188fu/r113.f5df53d -k 6.0.5-arch1-1' exited 10
==> ERROR: Missing 5.15.75-1-lts kernel modules tree for module 8188fu/r113.f5df53d.
(3/3) Performing snapper post snapshots for the following configurations...
The command
echo 'alias usb:v0BDApF179d*dc*dsc*dp*icFFiscFFipFFin* rtl8188fu' | sudo tee /etc/modprobe.d/r8188eu-blacklist.conf
doesn't seem to do much.
Installation still fails.
Your on kernel 5.15 so you have to backlist the rl8188eu driver. You can do that with this command
echo 'alias usb:v0BDApF179d*dc*dsc*dp*icFFiscFFipFFin* rtl8188fu' | sudo tee /etc/modprobe.d/r8188eu-blacklist.conf
The code was taken from the same repo the aur package was made from
https://github.com/kelebek333/rtl8188fu
I'm using rbenv and in Ec2 instance I'm trying to install a ruby different version but when I execute
rbenv install 2.7.2
following errors occur.
Downloading ruby-2.7.2.tar.bz2...
-> https://cache.ruby-lang.org/pub/ruby/2.7/ruby-2.7.2.tar.bz2
Installing ruby-2.7.2...
BUILD FAILED (Ubuntu 20.04 using ruby-build 20210119)
Inspect or clean up the working tree at /tmp/ruby-build.20210217075101.162094.zs1iDJ
Results logged to /tmp/ruby-build.20210217075101.162094.log
Last 10 log lines:
compiling mjit.c
compiling mjit_compile.c
compiling node.c
compiling numeric.c
compiling object.c
compiling pack.c
compiling parse.c
gcc: fatal error: Killed signal terminated program cc1
compilation terminated.
make: *** [Makefile:421: parse.o] Error 1
meanwhile, my system is using the default ruby version
ubuntu#ip-112-34-9-342:~$ rbenv versions
* system (set by /home/ubuntu/.rbenv/version)
I don't confirm it is a space issue or something else, space information is listed below.
ubuntu#ip-112-34-9-342:~$ free
total used free shared buff/cache available
Mem: 486776 177636 89396 800 219744 287744
Swap: 0 0 0
Run the following -
$ sudo apt install gcc make curl libssl-dev zlib1g-dev
You are welcome.
Recently I clean installed Yosemite 10.10.2
I also installed gcc using
brew install gcc
Now I'm trying to build and install python and openmpi from source because previously I've had problems with gfortran and clang.
So I did
brew install openmpi --build-from-source -verbose
brew install python --build-from-source -verbose
with variables and aliases:
export CC=gcc-4.9
export CXX=g++-4.9
export CPP=g++-4.9
export LD=gcc-4.9
export FC=gfortran-4.9
export HOMEBREW_CC=gcc-4.9
export HOMEBREW_LD=gcc-4.9
export HOMEBREW_CXX=g++-4.9
export HOMEBREW_CPP=g++-4.9
export HOMEBREW_FC=gfortran
alias cc=gcc-4.9
alias gcc=gcc-4.9
alias c++=c++-4.9
alias g++=g++-4.9
Still getting the following error:
In file included from /usr/include/dispatch/dispatch.h:51:0,
from /System/Library/Frameworks/CoreFoundation.framework/Headers/CFStream.h:15,
from /System/Library/Frameworks/CoreFoundation.framework/Headers/CFPropertyList.h:13,
from /System/Library/Frameworks/CoreFoundation.framework/Headers/CoreFoundation.h:55,
from /System/Library/Frameworks/CoreServices.framework/Headers/CoreServices.h:19,
from gunicollate.c:30:
/usr/include/dispatch/object.h:143:15: error: expected identifier or '(' before '^' token
typedef void (^dispatch_block_t)(void);
/usr/include/dispatch/object.h:362:3: error: unknown type name 'dispatch_block_t'
dispatch_block_t notification_block);
==> Formula
Path: /usr/local/Library/Formula/pkg-config.rb
==> Configuration
HOMEBREW_VERSION: 0.9.5
ORIGIN: https://github.com/Homebrew/homebrew
HEAD: 9bbd6637009256d70b57691c3ad1979ca2bb5916
Last commit: 9 hours ago
HOMEBREW_PREFIX: /usr/local
HOMEBREW_CELLAR: /usr/local/Cellar
CPU: dual-core 64-bit penryn
OS X: 10.10.2-x86_64
Xcode: 6.2
CLT: 6.2.0.0.1.1424975374
Clang: 6.0 build 600
X11: N/A
System Ruby: 2.0.0-p481
Perl: /usr/bin/perl
Python: /usr/bin/python
Ruby: /usr/bin/ruby
Java: 1.6.0_65
==> ENV
HOMEBREW_CC: gcc-4.9
HOMEBREW_CXX: g++-4.9
MAKEFLAGS: -j2
CMAKE_PREFIX_PATH: /usr/local
CMAKE_INCLUDE_PATH: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk/usr/include/libxml2:/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk/usr/include/apache2:/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk/System/Library/Frameworks/OpenGL.framework/Versions/Current/Headers
CMAKE_LIBRARY_PATH: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk/System/Library/Frameworks/OpenGL.framework/Versions/Current/Libraries
CMAKE_FRAMEWORK_PATH: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk/System/Library/Frameworks
PKG_CONFIG_LIBDIR: /usr/lib/pkgconfig:/usr/local/Library/ENV/pkgconfig/10.10
HOMEBREW_SDKROOT: /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk
PATH: /usr/local/Library/ENV/4.3:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/opt/gcc/bin
Error: pkg-config 0.28 did not build
My understanding is that there is a conflict between clang and gcc-4.9 configuration.
I could temporally solve it doing:
brew install pkg-config
So it doesn't build if from source and uses clang configuration.
I see that Xcode is still in the Include and Library path, and I think this prevents linking with gcc-4.9.
How can I install pkg-config using gcc-4.9 only?
Problem solved after following this instructions changing:
typedef void (^dispatch_block_t)(void); // this is for clang
To
typedef void* dispatch_block_t; //this is for gcc-4.9
can anybody help me how install ruby with rbenv install 1.9.3-p448 ubuntu 12.04 vagrant box
can not install it
error
Using username "vagrant".
Authenticating with public key "imported-openssh-key"
Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic-pae i686)
* Documentation: https://help.ubuntu.com/
System information as of Thu Jul 18 03:52:48 MSK 2013
System load: 0.19 Processes: 65
Usage of /: 15.8% of 7.28GB Users logged in: 0
Memory usage: 30% IP address for eth0: 10.0.2.15
Swap usage: 0%
Graph this data and manage this system at https://landscape.canonical.com/
Last login: Thu Jul 18 03:45:19 2013 from 10.0.2.2
__rvm_add_to_path: command not found
vagrant#precise32:~$ rbenv install 1.9.3-p448
Downloading yaml-0.1.4.tar.gz...
-> http://dqw8nmjcqpjn7.cloudfront.net/36c852831d02cf90508c29852361d01b
Installing yaml-0.1.4...
Installed yaml-0.1.4 to /home/vagrant/.rbenv/versions/1.9.3-p448
Downloading ruby-1.9.3-p448.tar.gz...
-> http://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.3-p448.tar.gz
BUILD FAILED
Inspect or clean up the working tree at /tmp/ruby-build.20130718035311.2292
Results logged to /tmp/ruby-build.20130718035311.2292.log
Last 10 log lines:
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/ruby-build.20130718035311.2292/yaml-0.1.4/win32'
make[1]: Leaving directory `/tmp/ruby-build.20130718035311.2292/yaml-0.1.4/win32'
/tmp/ruby-build.20130718035311.2292 ~
~
/tmp/ruby-build.20130718035311.2292 ~
checksum mismatch: ruby-1.9.3-p448.tar.gz (file is corrupt)
expected a893cff26bcf351b8975ebf2a63b1023, got fb82dd8806913041373242de9b2212ee
vagrant#precise32:~$
Download the ruby using your browser from ftp://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.3-p448.tar.bz2 and place it in ~/.rbenv/caches/ruby-1.9.3-p448.tar.bz2, then run rbenv install 1.9.3-p448
Explanation here