I have spent the last week trying to set up the following config:
VPS with clean Centos 7 install.
Ruby on Rails which runs Redmine, all to read out a back-up of the redmine database made with bacula.
Now mind you, I come from a Graphical design/Microsoft/Hardware engineering background and am now currently transitioning so I'm still very unfamiliar with most of the stack used at my current employer as I have only been working there for a couple of weeks.
Setting up the VPS and installing Centos7 is easy enough, I then proceed with installing rbenv/httpd/bundler/rmagick/all the gems and restore the redmine back-up (back-up from the entire install).
Now I want to run a rake db:migrate command (just following the wiki's from redmine and digital ocean) and this happens:
[user#machinename redmine]$ rake db:migrate
rake aborted!
ActiveRecord::AdapterNotSpecified: 'development' database is not configured. Available: ["production"]
/opt/redmine-3.1.0/lib/plugins/acts_as_activity_provider/init.rb:2:in `block in <top (required)>'
/opt/redmine-3.1.0/config/initializers/00-core_plugins.rb:12:in `eval'
/opt/redmine-3.1.0/config/initializers/00-core_plugins.rb:12:in `block in <top (required)>'
/opt/redmine-3.1.0/config/initializers/00-core_plugins.rb:2:in `each'
/opt/redmine-3.1.0/config/initializers/00-core_plugins.rb:2:in `<top (required)>'
/opt/redmine-3.1.0/config/environment.rb:14:in `<top (required)>'
Tasks: TOP => db:migrate => environment
(See full trace by running task with --trace)
[user#machinename redmine]$
If I then inspect lets say 00-core_plugins.rb I can't seem to find what is wrong.
# Loads the core plugins located in lib/plugins
Dir.glob(File.join(Rails.root, "lib/plugins/*")).sort.each do |directory|
if File.directory?(directory)
lib = File.join(directory, "lib")
if File.directory?(lib)
$:.unshift lib
ActiveSupport::Dependencies.autoload_paths += [lib]
end
initializer = File.join(directory, "init.rb")
if File.file?(initializer)
config = RedmineApp::Application.config
eval(File.read(initializer), binding, initializer)
end
end
end
If anyone could offer some help/insight to what it is I am doing wrong it would be greatly appreciated.
A standalone installer which sets up redmine and all dependencies is also good as I actually only have to be able to import the back-up of the DB in to redmine.
Full --trace:
[user#machinename redmine]$ rake db:migrate --trace
** Invoke db:migrate (first_time)
** Invoke environment (first_time)
** Execute environment
rake aborted!
ActiveRecord::AdapterNotSpecified: 'development' database is not configured. Available: ["production"]
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activerecord-4.2.3/lib/active_record/connection_adapters/connection_specification.rb:248:in `resolve_symbol_connection'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activerecord-4.2.3/lib/active_record/connection_adapters/connection_specification.rb:211:in `resolve_connection'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activerecord-4.2.3/lib/active_record/connection_adapters/connection_specification.rb:139:in `resolve'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activerecord-4.2.3/lib/active_record/connection_adapters/connection_specification.rb:169:in `spec'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activerecord-4.2.3/lib/active_record/connection_handling.rb:50:in `establish_connection'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activerecord-4.2.3/lib/active_record/railtie.rb:120:in `block (2 levels) in <class:Railtie>'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/lazy_load_hooks.rb:38:in `instance_eval'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/lazy_load_hooks.rb:38:in `execute_hook'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/lazy_load_hooks.rb:45:in `block in run_load_hooks'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/lazy_load_hooks.rb:44:in `each'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/lazy_load_hooks.rb:44:in `run_load_hooks'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activerecord-4.2.3/lib/active_record/base.rb:315:in `<module:ActiveRecord>'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activerecord-4.2.3/lib/active_record/base.rb:26:in `<top (required)>'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:274:in `require'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:274:in `block in require'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:240:in `load_dependency'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:274:in `require'
/opt/redmine-3.1.0/lib/plugins/acts_as_activity_provider/init.rb:2:in `block in <top (required)>'
/opt/redmine-3.1.0/config/initializers/00-core_plugins.rb:12:in `eval'
/opt/redmine-3.1.0/config/initializers/00-core_plugins.rb:12:in `block in <top (required)>'
/opt/redmine-3.1.0/config/initializers/00-core_plugins.rb:2:in `each'
/opt/redmine-3.1.0/config/initializers/00-core_plugins.rb:2:in `<top (required)>'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:268:in `load'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:268:in `block in load'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:240:in `load_dependency'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:268:in `load'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/engine.rb:652:in `block in load_config_initializer'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/notifications.rb:166:in `instrument'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/engine.rb:651:in `load_config_initializer'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/engine.rb:616:in `block (2 levels) in <class:Engine>'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/engine.rb:615:in `each'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/engine.rb:615:in `block in <class:Engine>'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/initializable.rb:30:in `instance_exec'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/initializable.rb:30:in `run'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/initializable.rb:55:in `block in run_initializers'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:228:in `block in tsort_each'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:350:in `block (2 levels) in each_strongly_connected_component'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:422:in `block (2 levels) in each_strongly_connected_component_from'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:431:in `each_strongly_connected_component_from'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:421:in `block in each_strongly_connected_component_from'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/initializable.rb:44:in `each'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/initializable.rb:44:in `tsort_each_child'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:415:in `call'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:415:in `each_strongly_connected_component_from'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:349:in `block in each_strongly_connected_component'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:347:in `each'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:347:in `call'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:347:in `each_strongly_connected_component'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:226:in `tsort_each'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/tsort.rb:205:in `tsort_each'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/initializable.rb:54:in `run_initializers'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/application.rb:352:in `initialize!'
/opt/redmine-3.1.0/config/environment.rb:14:in `<top (required)>'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:274:in `require'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:274:in `block in require'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:240:in `load_dependency'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/activesupport-4.2.3/lib/active_support/dependencies.rb:274:in `require'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/application.rb:328:in `require_environment!'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/railties-4.2.3/lib/rails/application.rb:457:in `block in run_tasks_blocks'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:240:in `block in execute'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:235:in `each'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:235:in `execute'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:179:in `block in invoke_with_call_chain'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/monitor.rb:214:in `mon_synchronize'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:172:in `invoke_with_call_chain'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:201:in `block in invoke_prerequisites'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:199:in `each'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:199:in `invoke_prerequisites'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:178:in `block in invoke_with_call_chain'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/2.3.0/monitor.rb:214:in `mon_synchronize'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:172:in `invoke_with_call_chain'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/task.rb:165:in `invoke'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/application.rb:150:in `invoke_task'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/application.rb:106:in `block (2 levels) in top_level'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/application.rb:106:in `each'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/application.rb:106:in `block in top_level'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/application.rb:115:in `run_with_threads'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/application.rb:100:in `top_level'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/application.rb:78:in `block in run'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/application.rb:176:in `standard_exception_handling'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/lib/rake/application.rb:75:in `run'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/lib/ruby/gems/2.3.0/gems/rake-10.4.2/bin/rake:33:in `<top (required)>'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/bin/rake:22:in `load'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/bin/rake:22:in `<main>'
Tasks: TOP => db:migrate => environment
Database.yml:
# Default setup is given for MySQL with ruby1.9.
# Examples for PostgreSQL, SQLite3 and SQL Server can be found at the end.
# Line indentation must be 2 spaces (no tabs).
production:
adapter: mysql2
database: redmine
host: localhost
username: redmine
password: "therightpassword_icheckeditadozentimes"
encoding: utf8
development:
adapter: mysql2
database: redmine
host: localhost
username: redmine
password: "therightpassword_icheckeditadozentimes"
encoding: utf8
# PostgreSQL configuration example
#production:
# adapter: postgresql
# database: redmine
# host: localhost
# username: postgres
# password: "postgres"
# SQLite3 configuration example
#production:
# adapter: sqlite3
# database: db/redmine.sqlite3
# SQL Server configuration example
#production:
# adapter: sqlserver
# database: redmine
# host: localhost
# username: jenkins
# password: jenkins
Configuration.yml
# = Redmine configuration file
#
# Each environment has it's own configuration options. If you are only
# running in production, only the production block needs to be configured.
# Environment specific configuration options override the default ones.
#
# Note that this file needs to be a valid YAML file.
# DO NOT USE TABS! Use 2 spaces instead of tabs for identation.
# default configuration options for all environments
default:
# Outgoing emails configuration
# See the examples below and the Rails guide for more configuration options:
# http://guides.rubyonrails.org/action_mailer_basics.html#action-mailer-configuration
email_delivery:
delivery_method: :smtp
smtp_settings:
enable_starttls_auto: true
#ssl: true
address: smtp.gmail.com
port: "587"
domain: "site.tld"
authentication: :plain
user_name: "ticketing#site.tld"
password: "god our security is atrocious"
# ==== Simple SMTP server at localhost
#
# email_delivery:
# delivery_method: :smtp
# smtp_settings:
# address: "localhost"
# port: 25
#
# ==== SMTP server at example.com using LOGIN authentication and checking HELO for foo.com
#
# email_delivery:
# delivery_method: :smtp
# smtp_settings:
# address: "example.com"
# port: 25
# authentication: :login
# domain: 'foo.com'
# user_name: 'myaccount'
# password: 'password'
#
# ==== SMTP server at example.com using PLAIN authentication
#
# email_delivery:
# delivery_method: :smtp
# smtp_settings:
configuration.yml # address: "example.com"
# port: 25
# authentication: :plain
# domain: 'example.com'
# user_name: 'myaccount'
# password: 'password'
#
# ==== SMTP server at using TLS (GMail)
# This might require some additional configuration. See the guides at:
# http://www.redmine.org/projects/redmine/wiki/EmailConfiguration
#
# email_delivery:
# delivery_method: :smtp
# smtp_settings:
# enable_starttls_auto: true
# address: "smtp.gmail.com"
# port: 587
# domain: "smtp.gmail.com" # 'your.domain.com' for GoogleApps
# authentication: :plain
# user_name: "your_email#gmail.com"
# password: "your_password"
#
# ==== Sendmail command
#
# email_delivery:
# delivery_method: :sendmail
# Absolute path to the directory where attachments are stored.
# The default is the 'files' directory in your Redmine instance.
# Your Redmine instance needs to have write permission on this
# directory.
# Examples:
# attachments_storage_path: /var/redmine/files
# attachments_storage_path: D:/redmine/files
attachments_storage_path:
# Configuration of the autologin cookie.
# autologin_cookie_name: the name of the cookie (default: autologin)
# autologin_cookie_path: the cookie path (default: /)
# autologin_cookie_secure: true sets the cookie secure flag (default: false)
autologin_cookie_name:
autologin_cookie_path:
autologin_cookie_secure:
# Configuration of SCM executable command.
#
# Absolute path (e.g. /usr/local/bin/hg) or command name (e.g. hg.exe, bzr.exe)
# On Windows + CRuby, *.cmd, *.bat (e.g. hg.cmd, bzr.bat) does not work.
#
# On Windows + JRuby 1.6.2, path which contains spaces does not work.
# For example, "C:\Program Files\TortoiseHg\hg.exe".
# If you want to this feature, you need to install to the path which does not contains spaces.
# For example, "C:\TortoiseHg\hg.exe".
#
# Examples:
# scm_subversion_command: svn # (default: svn)
# scm_mercurial_command: C:\Program Files\TortoiseHg\hg.exe # (default: hg)
# scm_git_command: /usr/local/bin/git # (default: git)
# scm_cvs_command: cvs # (default: cvs)
# scm_bazaar_command: bzr.exe # (default: bzr)
# scm_darcs_command: darcs-1.0.9-i386-linux # (default: darcs)
#
scm_subversion_command:
scm_mercurial_command:
scm_git_command:
scm_cvs_command:
scm_bazaar_command:
scm_darcs_command:
# SCM paths validation.
#
# You can configure a regular expression for each SCM that will be used to
# validate the path of new repositories (eg. path entered by users with the
# "Manage repositories" permission and path returned by reposman.rb).
# The regexp will be wrapped with \A \z, so it must match the whole path.
# And the regexp is case sensitive.
#
# You can match the project identifier by using %project% in the regexp.
#
# You can also set a custom hint message for each SCM that will be displayed
# on the repository form instead of the default one.
#
# Examples:
# scm_subversion_path_regexp: file:///svnpath/[a-z0-9_]+
# scm_subversion_path_info: SVN URL (eg. file:///svnpath/foo)
#
# scm_git_path_regexp: /gitpath/%project%(\.[a-z0-9_])?/
#
scm_subversion_path_regexp:
scm_mercurial_path_regexp:
scm_git_path_regexp:
scm_cvs_path_regexp:
scm_bazaar_path_regexp:
scm_darcs_path_regexp:
scm_filesystem_path_regexp:
# Absolute path to the SCM commands errors (stderr) log file.
# The default is to log in the 'log' directory of your Redmine instance.
# Example:
# scm_stderr_log_file: /var/log/redmine_scm_stderr.log
scm_stderr_log_file:
# Key used to encrypt sensitive data in the database (SCM and LDAP passwords).
# If you don't want to enable data encryption, just leave it blank.
# WARNING: losing/changing this key will make encrypted data unreadable.
#
# If you want to encrypt existing passwords in your database:
# * set the cipher key here in your configuration file
# * encrypt data using 'rake db:encrypt RAILS_ENV=production'
#
# If you have encrypted data and want to change this key, you have to:
# * decrypt data using 'rake db:decrypt RAILS_ENV=production' first
# * change the cipher key here in your configuration file
# * encrypt data using 'rake db:encrypt RAILS_ENV=production'
database_cipher_key:
# Set this to false to disable plugins' assets mirroring on startup.
# You can use `rake redmine:plugins:assets` to manually mirror assets
# to public/plugin_assets when you install/upgrade a Redmine plugin.
#
#mirror_plugins_assets_on_startup: false
# Your secret key for verifying cookie session data integrity. If you
# change this key, all old sessions will become invalid! Make sure the
# secret is at least 30 characters and all random, no regular words or
# you'll be exposed to dictionary attacks.
#
# If you have a load-balancing Redmine cluster, you have to use the
# same secret token on each machine.
#secret_token: 'change it to a long random string'
secret_token: 'rake output I generated before and copy-pasta'ed'
# Requires users to re-enter their password for sensitive actions (editing
# of account data, project memberships, application settings, user, group,
# role, auth source management and project deletion). Disabled by default.
# Timeout is set in minutes.
#
#sudo_mode: true
#sudo_mode_timeout: 15
# Absolute path (e.g. /usr/bin/convert, c:/im/convert.exe) to
# the ImageMagick's `convert` binary. Used to generate attachment thumbnails.
#imagemagick_convert_command:
# Configuration of RMagcik font.
#
# Redmine uses RMagcik in order to export gantt png.
# You don't need this setting if you don't install RMagcik.
#
# In CJK (Chinese, Japanese and Korean),
# in order to show CJK characters correctly,
pt/redmine-3.1.0/log/"
# you need to set this configuration.
#
# Because there is no standard font across platforms in CJK,
# you need to set a font installed in your server.
#
# This setting is not necessary in non CJK.
#
# Examples for Japanese:
# Windows:
# rmagick_font_path: C:\windows\fonts\msgothic.ttc
# Linux:
# rmagick_font_path: /usr/share/fonts/ipa-mincho/ipam.ttf
#
rmagick_font_path:
# Maximum number of simultaneous AJAX uploads
#max_concurrent_ajax_uploads: 2
"/opt/redmine-3.1.0/log/"
# Configure OpenIdAuthentication.store
#
# allowed values: :memory, :file, :memcache
#openid_authentication_store: :memory
# specific configuration options for production environment
# that overrides the default ones
production:
# specific configuration options for development environment
# that overrides the default ones
development:"/opt/redmine-3.1.0/log/"
Thanks to Deepak's suggestion I added a "development" section in my database.yml but now I am getting this error:
[user#machinename redmine]$ rake db:migrate
rake aborted!
Psych::SyntaxError: (<unknown>): could not find expected ':' while scanning a simple key at line 52 column 3
/opt/redmine-3.1.0/lib/redmine/configuration.rb:86:in `load_from_yaml'
/opt/redmine-3.1.0/lib/redmine/configuration.rb:42:in `load'
/opt/redmine-3.1.0/lib/redmine/configuration.rb:67:in `[]'
/opt/redmine-3.1.0/lib/redmine/thumbnail.rb:24:in `<module:Thumbnail>'
/opt/redmine-3.1.0/lib/redmine/thumbnail.rb:21:in `<module:Redmine>'
/opt/redmine-3.1.0/lib/redmine/thumbnail.rb:20:in `<top (required)>'
/opt/redmine-3.1.0/lib/redmine.rb:47:in `<top (required)>'
/opt/redmine-3.1.0/config/initializers/30-redmine.rb:6:in `<top (required)>'
/opt/redmine-3.1.0/config/environment.rb:14:in `<top (required)>'
Tasks: TOP => db:migrate => environment
(See full trace by running task with --trace)
Output from #lightalloy's suggestion:
[user#machinename redmine]$ bundle exec rake db:migrate RAILS_ENV=production
rake aborted!
Psych::SyntaxError: (<unknown>): could not find expected ':' while scanning a simple key at line 52 column 3
/opt/redmine-3.1.0/lib/redmine/configuration.rb:86:in `load_from_yaml'
/opt/redmine-3.1.0/lib/redmine/configuration.rb:42:in `load'
/opt/redmine-3.1.0/lib/redmine/configuration.rb:67:in `[]'
/opt/redmine-3.1.0/lib/redmine/thumbnail.rb:24:in `<module:Thumbnail>'
/opt/redmine-3.1.0/lib/redmine/thumbnail.rb:21:in `<module:Redmine>'
/opt/redmine-3.1.0/lib/redmine/thumbnail.rb:20:in `<top (required)>'
/opt/redmine-3.1.0/lib/redmine.rb:47:in `<top (required)>'
/opt/redmine-3.1.0/config/initializers/30-redmine.rb:6:in `<top (required)>'
/opt/redmine-3.1.0/config/environment.rb:14:in `<top (required)>'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/bin/bundle:22:in `load'
/home/XX_USERNAME_XX/.rbenv/versions/2.3.4/bin/bundle:22:in `<main>'
Tasks: TOP => db:migrate => environment
(See full trace by running task with --trace)
I assume that you need to set up the production environment by your database.yml
So you need to specify it when you run rake db:migrate:
bundle exec rake db:migrate RAILS_ENV=production
Make sure you have the configuration for development env in config/database.yml
If not please add the following entry in config/database.yml
# MYSQL
development:
adapter: mysql2
database: development_db
host: localhost
username: username
password: password
encoding: utf8
# # SQLite
# development:
# adapter: sqlite3
# database: db/development.sqlite3
# pool: 5
# timeout: 5000
# # Postgres
# development:
# adapter: postgresql
# encoding: unicode
# database: development_db
# pool: 5
# username: username
# password: password
Related
I've create a RoR application with default database sqlite3. but the problem is sqlite3 is supported on heroku (deploying my app on cloud).
It's been whole day but i can't be able to connect my rails app to postgresql.
This is the steps I've followed till now to connect my app to postgresql
Replace: gem 'sqlite3', '~> 1.4'
with: gem 'pg'
then: bundle install
successfully install all the gems
after that convert my db to postgresql
conflict config/database.yml
Overwrite D:/New folder/amazon-product/config/database.yml? (enter "h" for help) [Ynaqdhm]
force config/database.yml
gsub Gemfile
gsub Gemfile
in that it's overwrite my existing database.yml file to postgresql
after that when i enter command
rake db:create db:migrate
it giving me the error
rails db:create db:migrate
rake aborted!
Bundler::GemRequireError: There was an error while trying to load the gem 'pg'.
Gem Load Error is: AddDllDirectory failed for C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/pg-1.2.3/lib/x64-mingw32Backtrace for gem load error is:
C:/Ruby30-x64/lib/ruby/site_ruby/3.0.0/ruby_installer/runtime/dll_directory.rb:83:in `add_dll_directory_winapi'
C:/Ruby30-x64/lib/ruby/site_ruby/3.0.0/ruby_installer/runtime/dll_directory.rb:50:in `initialize'
C:/Ruby30-x64/lib/ruby/site_ruby/3.0.0/ruby_installer/runtime/singleton.rb:12:in `new'
C:/Ruby30-x64/lib/ruby/site_ruby/3.0.0/ruby_installer/runtime/singleton.rb:12:in `add_dll_directory'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/pg-1.2.3/lib/pg.rb:15:in `block in <main>'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/pg-1.2.3/lib/pg.rb:26:in `rescue in <main>'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/pg-1.2.3/lib/pg.rb:4:in `<main>'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bootsnap-1.9.3/lib/bootsnap/load_path_cache/core_ext/kernel_require.rb:23:in `require'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bootsnap-1.9.3/lib/bootsnap/load_path_cache/core_ext/kernel_require.rb:23:in `block in require_with_bootsnap_lfi'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bootsnap-1.9.3/lib/bootsnap/load_path_cache/loaded_features_index.rb:100:in `register'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bootsnap-1.9.3/lib/bootsnap/load_path_cache/core_ext/kernel_require.rb:22:in `require_with_bootsnap_lfi'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bootsnap-1.9.3/lib/bootsnap/load_path_cache/core_ext/kernel_require.rb:31:in `require'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bundler-2.2.33/lib/bundler/runtime.rb:60:in `block (2 levels) in require'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bundler-2.2.33/lib/bundler/runtime.rb:55:in `each'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bundler-2.2.33/lib/bundler/runtime.rb:55:in `block in require'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bundler-2.2.33/lib/bundler/runtime.rb:44:in `each'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bundler-2.2.33/lib/bundler/runtime.rb:44:in `require'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/bundler-2.2.33/lib/bundler.rb:175:in `require'
D:/New folder/amazon-product/config/application.rb:7:in `<top (required)>'
D:/New folder/amazon-product/Rakefile:4:in `require_relative'
D:/New folder/amazon-product/Rakefile:4:in `<top (required)>'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/rake-13.0.6/lib/rake/rake_module.rb:29:in `load'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/rake-13.0.6/lib/rake/rake_module.rb:29:in `load_rakefile'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/rake-13.0.6/lib/rake/application.rb:710:in `raw_load_rakefile'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/rake-13.0.6/lib/rake/application.rb:104:in `block in load_rakefile'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/rake-13.0.6/lib/rake/application.rb:186:in `standard_exception_handling'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/rake-13.0.6/lib/rake/application.rb:103:in `load_rakefile'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/rake-13.0.6/lib/rake/application.rb:82:in `block in run'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/rake-13.0.6/lib/rake/application.rb:186:in `standard_exception_handling'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/rake-13.0.6/lib/rake/application.rb:80:in `run'
C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/rake-13.0.6/exe/rake:27:in `<top (required)>'
C:/Ruby30-x64/bin/rake:25:in `load'
C:/Ruby30-x64/bin/rake:25:in `<main>'
Bundler Error Backtrace:
D:/New folder/amazon-product/config/application.rb:7:in `<top (required)>'
D:/New folder/amazon-product/Rakefile:4:in `require_relative'
D:/New folder/amazon-product/Rakefile:4:in `<top (required)>'
Caused by:
RubyInstaller::Runtime::DllDirectory::WinApiError: AddDllDirectory failed for C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/pg-1.2.3/lib/x64-mingw32
D:/New folder/amazon-product/config/application.rb:7:in `<top (required)>'
D:/New folder/amazon-product/Rakefile:4:in `require_relative'
D:/New folder/amazon-product/Rakefile:4:in `<top (required)>'
Caused by:
LoadError: 126: The specified module could not be found. - C:/Ruby30-x64/lib/ruby/gems/3.0.0/gems/pg-1.2.3/lib/pg_ext.so
D:/New folder/amazon-product/config/application.rb:7:in `<top (required)>'
D:/New folder/amazon-product/Rakefile:4:in `require_relative'
D:/New folder/amazon-product/Rakefile:4:in `<top (required)>'
(See full trace by running task with --trace)
my database.yml
# PostgreSQL. Versions 9.3 and up are supported.
#
# Install the pg driver:
# gem install pg
# On macOS with Homebrew:
# gem install pg -- --with-pg-config=/usr/local/bin/pg_config
# On macOS with MacPorts:
# gem install pg -- --with-pg-config=/opt/local/lib/postgresql84/bin/pg_config
# On Windows:
# gem install pg
# Choose the win32 build.
# Install PostgreSQL and put its /bin directory on your path.
#
# Configure Using Gemfile
# gem 'pg'
#
default: &default
adapter: postgresql
encoding: unicode
# For details on connection pooling, see Rails configuration guide
# https://guides.rubyonrails.org/configuring.html#database-pooling
pool: <%= ENV.fetch("RAILS_MAX_THREADS") { 5 } %>
development:
<<: *default
database: amazon_product_development
# The specified database role being used to connect to postgres.
# To create additional roles in postgres see `$ createuser --help`.
# When left blank, postgres will use the default role. This is
# the same name as the operating system user running Rails.
#username: amazon_product
# The password associated with the postgres role (username).
#password:
# Connect on a TCP socket. Omitted by default since the client uses a
# domain socket that doesn't need configuration. Windows does not have
# domain sockets, so uncomment these lines.
#host: localhost
# The TCP port the server listens on. Defaults to 5432.
# If your server runs on a different port number, change accordingly.
#port: 5432
# Schema search path. The server defaults to $user,public
#schema_search_path: myapp,sharedapp,public
# Minimum log levels, in increasing order:
# debug5, debug4, debug3, debug2, debug1,
# log, notice, warning, error, fatal, and panic
# Defaults to warning.
#min_messages: notice
# Warning: The database defined as "test" will be erased and
# re-generated from your development database when you run "rake".
# Do not set this db to the same as development or production.
test:
<<: *default
database: amazon_product_test
# As with config/credentials.yml, you never want to store sensitive information,
# like your database password, in your source code. If your source code is
# ever seen by anyone, they now have access to your database.
#
# Instead, provide the password or a full connection URL as an environment
# variable when you boot the app. For example:
#
# DATABASE_URL="postgres://myuser:mypass#localhost/somedatabase"
#
# If the connection URL is provided in the special DATABASE_URL environment
# variable, Rails will automatically merge its configuration values on top of
# the values provided in this file. Alternatively, you can specify a connection
# URL environment variable explicitly:
#
# production:
# url: <%= ENV['MY_APP_DATABASE_URL'] %>
#
# Read https://guides.rubyonrails.org/configuring.html#configuring-a-database
# for a full overview on how database connection configuration can be specified.
#
production:
<<: *default
database: amazon_product_production
username: amazon_product
password: <%= ENV['AMAZON_PRODUCT_DATABASE_PASSWORD'] %>
I've already installed postgresql also create a new database table called 'details'
hierarchy of pgadmin 4
server --> postgresql 14 --> databases(2) --> postgres, details(which i want to use)
I'm trying to deploy a Rails app onto a Digital Ocean Ruby on Rails droplet. I thought it would be all set up to go and I'd just have to configure the app. But it's actually just like a standard Linux server.
I'm using this guide to set up the droplet, but had to tweak a few things to get them running. When I run cap production deploy, I get the following error message:
#<Thread:0x0000555b2f0ec948#/home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/runners/parallel.rb:10 run> terminated with exception (report_on_exception is true):
Traceback (most recent call last):
12: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/runners/parallel.rb:12:in `block (2 levels) in execute'
11: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/backends/abstract.rb:31:in `run'
10: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/backends/abstract.rb:31:in `instance_exec'
9: from /home/michael/.rvm/gems/ruby-2.6.5/gems/capistrano-passenger-0.2.0/lib/capistrano/tasks/passenger.cap:42:in `block (3 levels) in <top (required)>'
8: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/backends/abstract.rb:61:in `test'
7: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/backends/abstract.rb:148:in `create_command_and_execute'
6: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/backends/abstract.rb:148:in `tap'
5: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/backends/abstract.rb:148:in `block in create_command_and_execute'
4: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/backends/netssh.rb:130:in `execute_command'
3: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/backends/netssh.rb:177:in `with_ssh'
2: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/backends/connection_pool.rb:63:in `with'
1: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/backends/connection_pool.rb:63:in `call'
/home/michael/.rvm/gems/ruby-2.6.5/gems/net-ssh-6.1.0/lib/net/ssh.rb:268:in `start': Authentication failed for user michael#178.128.223.202 (Net::SSH::AuthenticationFailed)
1: from /home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/runners/parallel.rb:11:in `block (2 levels) in execute'
/home/michael/.rvm/gems/ruby-2.6.5/gems/sshkit-1.21.0/lib/sshkit/runners/parallel.rb:15:in `rescue in block (2 levels) in execute': Exception while executing as michael#178.128.223.202: Authentication failed for user michael#178.128.223.202 (SSHKit::Runner::ExecuteError)
(Backtrace restricted to imported tasks)
cap aborted!
SSHKit::Runner::ExecuteError: Exception while executing as michael#178.128.223.202: Authentication failed for user michael#178.128.223.202
Caused by:
Net::SSH::AuthenticationFailed: Authentication failed for user michael#178.128.223.202
Tasks: TOP => rvm:hook => passenger:rvm:hook => passenger:test_which_passenger
(See full trace by running task with --trace)
Here is my deploy.rb file:
# config valid for current version and patch releases of Capistrano
lock "~> 3.14.1"
set :application, "MyApp"
set :repo_url, "git#github.com:MyAccount/MyApp.git"
# Default deploy_to directory is /var/www/my_app_name
set :deploy_to, "/home/michael/my-app/#{fetch :application}"
# Default value for linked_dirs is []
append :linked_dirs, "log", "tmp/pids", "tmp/cache", "tmp/sockets", "public/system", "public/uploads", "vendor/bundle", ".bundle"
# Default value for keep_releases is 5
set :keep_releases, 5
And the deploy/production.rb file:
server "123.456.789.123", user: "me", roles: %w{app db web}
set :ssh_options, {
config: false,
keys: %w[/home/myhome/.ssh/id_ed25519],
forward_agent: true,
auth_methods: %w[publickey],
user: 'me'
}
Any help here would be good. All the other answers I've seen so far haven't fixed the problem for me (and none have had Tasks: TOP => rvm:hook => passenger:rvm:hook => passenger:test_which_passenger)
Trying to follow this tutorial for setting up an hstore. I've went through and added a preferences hstore to the User model and it all works correctly. Now I've added an exercises hstore to a different model, and this is what I get:
irb(main):128:0* workout = Workout.new
=> #<Workout id: nil, user_id: nil, created_at: nil, updated_at: nil, exercises: nil>
irb(main):129:0> workout.exercises = {
irb(main):130:1* lunges: "10"
irb(main):131:1> }
=> {:lunges=>"10"}
irb(main):132:0> workout.save!
(0.2ms) begin transaction
(1.5ms) rollback transaction
TypeError: can't cast Hash to
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/connection_adapters/abstract/quoting.rb:34:in `rescue in type_cast'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/connection_adapters/abstract/quoting.rb:23:in `type_cast'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/connection_adapters/sqlite3_adapter.rb:294:in `block in exec_query'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/connection_adapters/sqlite3_adapter.rb:293:in `map'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/connection_adapters/sqlite3_adapter.rb:293:in `exec_query'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/connection_adapters/abstract/database_statements.rb:76:in `exec_insert'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/connection_adapters/abstract/database_statements.rb:108:in `insert'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/connection_adapters/abstract/query_cache.rb:14:in `insert'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/relation.rb:64:in `insert'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/persistence.rb:521:in `_create_record'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/counter_cache.rb:139:in `_create_record'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/attribute_methods/dirty.rb:127:in `_create_record'
from /usr/local/lib/ruby/gems/2.2.0/gems/activerecord-4.2.0/lib/active_record/callbacks.rb:306:in `block in _create_record'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/callbacks.rb:88:in `call'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/callbacks.rb:88:in `_run_callbacks'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/callbacks.rb:734:in `_run_create_callbacks'
... 24 levels...
from /usr/local/lib/ruby/gems/2.2.0/gems/railties-4.2.0/lib/rails/commands/console.rb:9:in `start'
from /usr/local/lib/ruby/gems/2.2.0/gems/railties-4.2.0/lib/rails/commands/commands_tasks.rb:68:in `console'
from /usr/local/lib/ruby/gems/2.2.0/gems/railties-4.2.0/lib/rails/commands/commands_tasks.rb:39:in `run_command!'
from /usr/local/lib/ruby/gems/2.2.0/gems/railties-4.2.0/lib/rails/commands.rb:17:in `<top (required)>'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/dependencies.rb:274:in `require'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/dependencies.rb:274:in `block in require'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/dependencies.rb:240:in `load_dependency'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/dependencies.rb:274:in `require'
from /Users/nomad/Documents/milonos/bin/rails:8:in `<top (required)>'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/dependencies.rb:268:in `load'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/dependencies.rb:268:in `block in load'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/dependencies.rb:240:in `load_dependency'
from /usr/local/lib/ruby/gems/2.2.0/gems/activesupport-4.2.0/lib/active_support/dependencies.rb:268:in `load'
from /usr/local/Cellar/ruby/2.2.2/lib/ruby/2.2.0/rubygems/core_ext/kernel_require.rb:54:in `require'
from /usr/local/Cellar/ruby/2.2.2/lib/ruby/2.2.0/rubygems/core_ext/kernel_require.rb:54:in `require'
from -e:1:in `<main>'irb(main):133:0>
My migration for creating the Workout model is:
class CreateWorkouts < ActiveRecord::Migration
def change
create_table :workouts do |t|
t.references :user, index: true
t.timestamps null: false
end
add_foreign_key :workouts, :users
end
end
And the migration for adding the hstore:
class AddExercisesToWorkouts < ActiveRecord::Migration
def change
enable_extension "hstore"
add_column :workouts, :exercises, :hstore
add_index :workouts, :exercises, using: :gist
end
end
And my model:
class Workout < ActiveRecord::Base
belongs_to :user
store_accessor :exercises
end
When doing user = User.new and adding hash settings just as above to the preferences hstore, everything seems to work. What am I missing here ?
What I ended up doing was installing postgres and switching from sqlite to it. Then I did rake db:drop db:create db:migrate db:seed, and all the migrations went through. Changed databases.yml to:
# PostgreSQL. Versions 8.2 and up are supported.
#
# Install the pg driver:
# gem install pg
# On OS X with Homebrew:
# gem install pg -- --with-pg-config=/usr/local/bin/pg_config
# On OS X with MacPorts:
# gem install pg -- --with-pg-config=/opt/local/lib/postgresql84/bin/pg_config
# On Windows:
# gem install pg
# Choose the win32 build.
# Install PostgreSQL and put its /bin directory on your path.
#
# Configure Using Gemfile
# gem 'pg'
#
development:
adapter: postgresql
encoding: unicode
database: appname_development
pool: 5
username: username
password:
timeout: 5000
# Connect on a TCP socket. Omitted by default since the client uses a
# domain socket that doesn't need configuration. Windows does not have
# domain sockets, so uncomment these lines.
#host: localhost
# The TCP port the server listens on. Defaults to 5432.
# If your server runs on a different port number, change accordingly.
#port: 5432
# Schema search path. The server defaults to $user,public
#schema_search_path: myapp,sharedapp,public
# Minimum log levels, in increasing order:
# debug5, debug4, debug3, debug2, debug1,
# log, notice, warning, error, fatal, and panic
# Defaults to warning.
#min_messages: notice
# Warning: The database defined as "test" will be erased and
# re-generated from your development database when you run "rake".
# Do not set this db to the same as development or production.
test:
adapter: postgresql
encoding: unicode
database: appname_test
pool: 5
username: username
password:
timeout: 5000
I am trying to deploy my app on heroku . For that I changed from sqlite3 to pg because heroku doesn't support sqlite3. I changed things in database.yml:
# SQLite version 3.x
# gem install sqlite3
#
# Ensure the SQLite 3 gem is defined in your Gemfile
# gem 'sqlite3'
#
default: &default
adapter: postgresql
pool: 5
timeout: 5000
development:
<<: *default
database: db/development.pg
# Warning: The database defined as "test" will be erased and
# re-generated from your development database when you run "rake".
# Do not set this db to the same as development or production.
test:
<<: *default
database: db/test.pg
production:
<<: *default
database: db/my_database_production.pg
I also did add the gem and install it (gem install pg) . When I try to run bundler exec rake db:create it gives me the following error:
rake aborted!
ActiveRecord::NoDatabaseError: FATAL: role "flo" does not exist
Run `$ bin/rake db:create db:migrate` to create your database
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/postgresql_adapter.rb:898:in `rescue in connect'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/postgresql_adapter.rb:888:in `connect'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/postgresql_adapter.rb:568:in `initialize'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/postgresql_adapter.rb:41:in `new'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/postgresql_adapter.rb:41:in `postgresql_connection'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/abstract/connection_pool.rb:435:in `new_connection'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/abstract/connection_pool.rb:445:in `checkout_new_connection'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/abstract/connection_pool.rb:416:in `acquire_connection'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/abstract/connection_pool.rb:351:in `block in checkout'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/abstract/connection_pool.rb:350:in `checkout'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/abstract/connection_pool.rb:265:in `block in connection'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/abstract/connection_pool.rb:264:in `connection'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_adapters/abstract/connection_pool.rb:541:in `retrieve_connection'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_handling.rb:113:in `retrieve_connection'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/connection_handling.rb:87:in `connection'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/migration.rb:909:in `initialize'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/migration.rb:807:in `new'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/migration.rb:807:in `up'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/migration.rb:785:in `migrate'
/home/flo/Ruby/sample_app/vendor/bundle/ruby/1.9.1/gems/activerecord-4.1.6/lib/active_record/railties/databases.rake:34:in `block (2 levels) in <top (required)>'
Tasks: TOP => db:migrate
(See full trace by running task with --trace)
I am trying to write su - postgres in my terminal but from that command I get :
No passwd entry for user 'postgres'
What should I do ?
You need to add the user 'flo' to your local postgres instance (I usually just add them as a super user so I don't have permissions issues). Run this in your terminal:
createuser -P -s -e flo
You will be prompted to set a password as well. Lets use 'flo' for now. You will then need to add this to your databases.yml file:
development:
<<: *default
database: db/development.pg
username: flo
password: flo
Do that and then try running rake db:create again. Check this out for additional help.
I am attempting to use this bit of useful code from this question:
namespace :db do
namespace :test do
task :reset do
ActiveRecord::Base.establish_connection('test')
Rake::Task['db:drop'].invoke
Rake::Task['db:create'].invoke
Rake::Task['db:migrate'].invoke
ActiveRecord::Base.establish_connection(ENV['RAILS_ENV']) #Make sure you don't have side-effects!
end
end
end
Unfortunately I am getting this error:
** Invoke db:test:reset (first_time)
** Execute db:test:reset
rake aborted!
database configuration does not specify adapter
/home/nick/.rvm/gems/ruby-1.9.3-p194/gems/activerecord- 3.2.5/lib/active_record/connection_adapters/abstract/connection_specification.rb:45:in `resolve_hash_connection'
/home/nick/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.5/lib/active_record/connection_adapters/abstract/connection_specification.rb:39:in `resolve_string_connection'
/home/nick/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.5/lib/active_record/connection_adapters/abstract/connection_specification.rb:25:in `spec'
/home/nick/.rvm/gems/ruby-1.9.3-p194/gems/activerecord-3.2.5/lib/active_record/connection_adapters/abstract/connection_specification.rb:127:in `establish_connection'
/home/nick/Projects/yumbin/lib/tasks/test_environment.rake:4:in `block (3 levels) in <top (required)>'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/task.rb:205:in `call'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/task.rb:205:in `block in execute'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/task.rb:200:in `each'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/task.rb:200:in `execute'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/task.rb:158:in `block in invoke_with_call_chain'
/home/nick/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/monitor.rb:211:in `mon_synchronize'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/task.rb:151:in `invoke_with_call_chain'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/task.rb:144:in `invoke'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/application.rb:116:in `invoke_task'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/application.rb:94:in `block (2 levels) in top_level'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/application.rb:94:in `each'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/application.rb:94:in `block in top_level'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/application.rb:133:in `standard_exception_handling'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/application.rb:88:in `top_level'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/application.rb:66:in `block in run'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/application.rb:133:in `standard_exception_handling'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/lib/rake/application.rb:63:in `run'
/home/nick/.rvm/gems/ruby-1.9.3-p194#global/gems/rake-0.9.2.2/bin/rake:33:in `<top (required)>'
./bundler_stubs/rake:16:in `load'
./bundler_stubs/rake:16:in `<main>'
Tasks: TOP => db:test:reset
As you can see I am using Ruby 1.9.3 via RVM. I am using Rails 3.2.5, Rake version 0.9.2.2 and Postgresql 9.1, and the pg gem (0.13.2). Additionally, I have no database errors in my environments. Thhe app is deployed and running on Heroku, runs locally in development, and I can run my full test suite without issue. In a Rails console running the line:
ActiveRecord::Base.establish_connection('test')
succeeds. I checked the database.yml in vi for invisible characters but could not find any. Only '$' at the end of each line. I'm starting to think that the answer is incredibly simple and in front of my nose but I just can't see it.
UPDATE: Adding my database.yml file:
# SQLite version 3.x
# gem install sqlite3
#
# Ensure the SQLite 3 gem is defined in your Gemfile
# gem 'sqlite3'
development:
adapter: postgresql
encoding: unicode
database: myapp-dev
pool: 5
username: ******
password: *******
# Warning: The database defined as "test" will be erased and
# re-generated from your development database when you run "rake".
# Do not set this db to the same as development or production.
test:
adapter: postgresql
encoding: unicode
database: myapp-test
pool: 5
username: *****
password: ******
production:
adapter: postgresql
encoding: unicode
database: myapp
pool: 5
username: ******
password: *******
You need a test entry in your database.yml file, and I think you're probably lacking one. Make sure you have an entry that looks like this in database.yml:
test:
adapter: sqlite3
database: db/test.sqlite3
pool: 5
timeout: 5000
Using whatever adapter and database your development database is using.