I have a custom board, which has AM335. I want to boot from the network or from SD card. what component should be there in Device tree? I would say the just minimum.
If you inherit/include from am33xx.dtsi and am335x-bone-common.dtsi you should be able to boot from network (TFTP/NFS) on your AM335 board.
/dts-v1/;
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
/ {
model = "TI AM335x BeagleBone Black";
compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
};
&ldo3_reg {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
&mmc1 {
vmmc-supply = <&vmmcsd_fixed>;
};
&mmc2 {
vmmc-supply = <&vmmcsd_fixed>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_pins>;
bus-width = <8>;
status = "okay";
};
&lcdc {
status = "okay";
};
Related
I want to create an app for airplane navigation. Since for pilots the Bing maps are useless I need to create my own map a texture of an aeronautical map.
I couldn't find any clue how to start on this. Is there an SDK for Bing maps where I can create my own texture/overlay?
Do I need to start from rock bottom and create a picture and change its position so the relevant part is in the visible area of the device?
I need the following features:
Show current position on the map.
Add some custom POIs via coordinates
After quite some research I figured it out myself.
Here is most of the code needed if you have the same scenario
Uri format:
"https://webserver/tiles/{zoomlevel}/{x}/{y}.png";
private void InitMap()
{
_gps = new Geolocator();
pointBuffer = cologne;
image = RandomAccessStreamReference.CreateFromUri(new Uri("ms-appx:///Assets/images/airplane.png"));
MyMap.Style = MapStyle.None;
//Setup Icao Layer
_icaoTileSource = new MapTileSource();
var _tileLayer = new HttpMapTileDataSource();
_tileLayer.UriFormatString = IcaoUri;
_icaoTileSource.DataSource = _tileLayer;
MyMap.TileSources.Add(_icaoTileSource);
//Setup VFR Layer
_vfrTileSource = new MapTileSource();
var _vfrtileLayer = new HttpMapTileDataSource();
_vfrtileLayer.UriFormatString = VfrUri;
_vfrTileSource.DataSource = _vfrtileLayer;
//Setup Low Level Layer
_lowlvlTileSource = new MapTileSource();
var _lowlvltileLayer = new HttpMapTileDataSource();
_lowlvltileLayer.UriFormatString = LowLvlUri;
_lowlvlTileSource.DataSource = _lowlvltileLayer;
airplane = new MapIcon()
{
Title = "My Position",
Image = image,
Visible = true,
Location = cologne,
NormalizedAnchorPoint = new Point(0.5, 0.5)
};
_tileLayer.AllowCaching = true;
MyMap.MapElements.Add(airplane);
systemSetCenter = true;
MyMap.Center = cologne;
MyMap.ZoomLevel = 10;
_vm.ZoomLevel = MyMap.ZoomLevel;
MyMap.ZoomLevelChanged += (s, e) =>
{
if(s.ZoomLevel > maxZoomLevel)
{
s.ZoomLevel = maxZoomLevel;
}
_vm.ZoomLevel = s.ZoomLevel;
};
}
I am currently using the Graph API to retrieve the News Feed for a user. However, some Posts of type "update" do not return any info on the original post e.g. in the result extract posted below, the story is "Joubert Nel commented on a link", but there is no info included as to what the link is, or the picture that goes with it. How can I obtain this info please?
actions = (
{
link = "https://www.facebook.com/637106301/posts/520940825396";
name = Comment;
}
);
comments = {
data = (
{
"can_remove" = 0;
"created_time" = "2014-03-15T13:06:43+0000";
from = {
id = 100000194244146;
name = "Laurie Edwards";
};
id = "520940825396_133907";
"like_count" = 2;
message = "Or you could just come home for a while!";
"user_likes" = 0;
},
);
paging = {
cursors = {
after = "MTI=";
before = "MQ==";
};
};
};
"created_time" = "2014-03-15T14:41:56+0000";
from = {
id = 637106301;
name = "Joubert Nel";
};
id = "637106301_520940825396";
likes = {
data = (
{
id = 214500098;
name = "Samuel Freilich";
},
{
);
paging = {
cursors = {
after = "OTUwMTE2OA==";
before = MjE0NTAwMDk4;
};
};
};
privacy = {
value = "";
};
story = "Joubert Nel commented on a link.";
"story_tags" = {
0 = (
{
id = 637106301;
length = 11;
name = "Joubert Nel";
offset = 0;
type = user;
}
);
};
type = status;
"updated_time" = "2014-03-15T14:41:56+0000";
is the link posted by Joubert? or using app you have permission. sounds like you don't have permission to post(link) but u have permission to Joubert activities
I am using a tee chart library in xamarin (Android). i am facing a problem to daynamic binding data in "Candle Chart"
The Sample Code Like this!
protected override void OnCreate(Bundle bundle)
{
base.OnCreate(bundle);
RequestWindowFeature(WindowFeatures.NoTitle);
SetContentView(Resource.Layout.CandleChart);
//InitializeComponent();
chart = new Steema.TeeChart.TChart(this.ApplicationContext);
chart.Zoom.Style = Steema.TeeChart.ZoomStyles.InChart;
Steema.TeeChart.Themes.BlackIsBackTheme myTheme = new Steema.TeeChart.Themes.BlackIsBackTheme(chart.Chart);
myTheme.Apply();
Type tmp = (Type)Steema.TeeChart.Utils.SeriesTypesOf[12];
Steema.TeeChart.Styles.Series series;
series = chart.Series.Add(tmp);
series.FillSampleValues(); /* Here i want to fill series with my data listed bellow */
chart.Aspect.View3D = Needs3D(chart[0]);
chart.Panel.Transparent = true;
SetContentView(chart);
}
now i want add series data manually
like :
currentItem.Data.Close
currentItem.Data.Open
currentItem.Data.High
currentItem.Data.Low
currentItem.Time
etc.. so, plz help me to achieve this ..
thanks, in advance
==================================================================================
My Code Like as Bellow
private void LoadChart(GraphOutput resGraph)
{
DataSet_Obj.Tables.Add("CandleTable");
DataSet_Obj.Tables["CandleTable"].Columns.Add(new DataColumn("Date", System.Type.GetType("System.DateTime")));
DataSet_Obj.Tables["CandleTable"].Columns.Add(new DataColumn("Open", System.Type.GetType("System.Double")));
DataSet_Obj.Tables["CandleTable"].Columns.Add(new DataColumn("Close", System.Type.GetType("System.Double")));
DataSet_Obj.Tables["CandleTable"].Columns.Add(new DataColumn("High", System.Type.GetType("System.Double")));
DataSet_Obj.Tables["CandleTable"].Columns.Add(new DataColumn("Low", System.Type.GetType("System.Double")));
for (int i = 0; i < resGraph.graphSymbol[0].CandleSticks.Length; i++)
{
DataRow_Obj = DataSet_Obj.Tables["CandleTable"].NewRow();
DataRow_Obj["Date"] = resGraph.graphSymbol[0].CandleSticks[i].CandleTime; //DateTime
DataRow_Obj["Low"] = resGraph.graphSymbol[0].CandleSticks[i].CandleData.Low; //Float
DataRow_Obj["Close"] = resGraph.graphSymbol[0].CandleSticks[i].CandleData.Close; //Float
DataRow_Obj["Open"] = resGraph.graphSymbol[0].CandleSticks[i].CandleData.Open; //Float
DataRow_Obj["High"] = resGraph.graphSymbol[0].CandleSticks[i].CandleData.High; //Float
DataSet_Obj.Tables["CandleTable"].Rows.Add(DataRow_Obj);
DataRow_Obj = null;
}
Tag_Serie_Candle = new Steema.TeeChart.Styles.Candle ();
chart.Series.Add(Tag_Serie_Candle);
chart.Aspect.View3D = Needs3D(chart[0]);
chart.Panel.Transparent = true;
try
{
Tag_Serie_Candle.DataSource = DataSet_Obj.Tables["CandleTable"]; /* here I got Error Like: "Cannot bind to non-supported datasource: CandleTable" */
Tag_Serie_Candle.OpenValues.DataMember = DataSet_Obj.Tables["CandleTable"].Columns["Open"].ToString();
Tag_Serie_Candle.CloseValues.DataMember = DataSet_Obj.Tables["CandleTable"].Columns["Close"].ToString();
Tag_Serie_Candle.DateValues.DataMember = DataSet_Obj.Tables["CandleTable"].Columns["Date"].ToString();
Tag_Serie_Candle.DateValues.DateTime = true;
Tag_Serie_Candle.HighValues.DataMember = DataSet_Obj.Tables["CandleTable"].Columns["High"].ToString();
Tag_Serie_Candle.LowValues.DataMember = DataSet_Obj.Tables["CandleTable"].Columns["Low"].ToString();
Tag_Serie_Candle.LabelMember = "Candle Chart";
Tag_Serie_Candle.CheckDataSource();
chartpie.AddView(chart, new ViewGroup.LayoutParams(ViewGroup.LayoutParams.MatchParent, ViewGroup.LayoutParams.MatchParent));
}
catch (Exception exe)
{
exe.Message.ToString();
}
}
You should do something as in the examples here:
http://www.teechart.net/support/viewtopic.php?f=4&t=2978&p=10547#p10547
http://www.teechart.net/support/viewtopic.php?f=4&t=3291&p=11691#p11691
http://www.teechart.net/support/viewtopic.php?f=4&t=2741&p=11681#p11681
I have found that, at the present moment, this is not working. I added the defect (ID566) list to be fixed as soon as possible (now fixed, see update at the bottom of the reply). If you register at Steema Software's Bugzilla system, you will be able to be in the CC List and be notified about status updates. In the meantime you can manually read values from the DataSet using this code:
Tag_Serie_Candle.DateValues.DateTime = true;
for (int i = 0; i < DataSet_Obj.Tables["CandleTable"].Rows.Count; i++)
{
DataRow row = DataSet_Obj.Tables["CandleTable"].Rows[i];
DateTime dt = Convert.ToDateTime(row["Date"]);
Double open = Convert.ToDouble(row["Open"]);
Double high = Convert.ToDouble(row["High"]);
Double low = Convert.ToDouble(row["Low"]);
Double close = Convert.ToDouble(row["Close"]);
Tag_Serie_Candle.Add(dt, open, high, low, close);
}
UPDATE: As of 11th February 2014, the defect has been fixed. Anyone interested in testing the solution please let me know.
I am drawing a pie chart using Devexpress in my MVC project.
While doing it by default my chart generated with three colors, as below
but my client is not satisfied, with the colors of it and wanted me to change them which match with our application background, so please help me, how to do this.
Thanks in advance.
Here is my code.
settings.Name = "chart";
settings.Width = 600;
settings.Height = 250;
settings.BorderOptions.Visible = false;
Series series1 = new Series("Type", DevExpress.XtraCharts.ViewType.Pie3D);
settings.Series.Add(series1);
series1.ArgumentScaleType = ScaleType.Qualitative;
series1.ArgumentDataMember = "ClassName";
series1.ValueScaleType = ScaleType.Numerical;
series1.ValueDataMembers.AddRange(new string[] { "PercentageValues" });
series1.LegendPointOptions.PointView = PointView.ArgumentAndValues;
series1.LegendPointOptions.ValueNumericOptions.Format = NumericFormat.Percent;
series1.LegendPointOptions.ValueNumericOptions.Precision = 0;
series1.Label.ResolveOverlappingMode = ResolveOverlappingMode.Default;
series1.Label.Visible = false;
Please refer the following code. I have successfully implemented the same for giving custom color for rangebar. I guess it will work for your case also
settings.CustomDrawSeriesPoint = (s, ev) =>
{
BarDrawOptions drawOptions = ev.SeriesDrawOptions as BarDrawOptions;
if (drawOptions == null)
return;
Color colorInTarget = Color.Blue;
double x = ev.SeriesPoint.Values[0];
double y = ev.SeriesPoint.Values[1];
if (x == 0)
{ //Do starting
colorInTarget = Color.FromArgb(159,125, 189);
}
else{
//Red - price Increase
// Green price Decrease
if (y > previousYValue)
{
colorInTarget = Color.Red; ;
}
else
{
colorInTarget = Color.Green;
}
}
previousYValue = y;
drawOptions.Color = colorInTarget;
drawOptions.FillStyle.FillMode = FillMode.Solid;
drawOptions.Border.Color = Color.Transparent;
};
you can set the theme and palette properties of the chart control. follow the links below to devexpress documentation. although the examples refers to winform application they are still avaliable in asp.net mvc controls.
http://documentation.devexpress.com/#WindowsForms/CustomDocument7433
http://documentation.devexpress.com/#WindowsForms/CustomDocument5538
// Define the chart's appearance and palette.
barChart.AppearanceName = "Dark";
barChart.PaletteName = "Opulent";
private List<StudentClass.ChartsPointsSummary> GetStudentSummaryResults()
{
var StudentId = Convert.ToInt32(Request.Params["StudentID"]);
var StudentDetailsP = CtxSM.SMISGet_StudentAttendanceDetailsByStudentId(StudentId, SessionDataManager.SessionData.LoginUserId, SessionDataManager.SessionData.AcademicYearID, SessionDataManager.SessionData.BusinessUnitId, ref outError).ToList();
var Presents = StudentDetailsP.Select(p => new { p.Months, p.Presents});
var CountsP = StudentDetailsP.Count();
List<StudentClass.ChartsPointsSummary> MT = new List<StudentClass.ChartsPointsSummary>();
foreach (var ab in Presents)
{
MT.Add(new StudentClass.ChartsPointsSummary { PresentSummaryX = ab.Months, PresentSummaryY = Convert.ToInt32(ab.Presents) });
}
var StudentDetailsA = CtxSM.SMISGet_StudentAttendanceDetailsByStudentId(StudentId, SessionDataManager.SessionData.LoginUserId, SessionDataManager.SessionData.AcademicYearID, SessionDataManager.SessionData.BusinessUnitId, ref outError).ToList();
var Absents = StudentDetailsP.Select(p => new { p.Months, p.Absents });
var CountsA = StudentDetailsA.Count();
foreach (var ab in Absents)
{
MT.Add(new StudentClass.ChartsPointsSummary { AbsentSummaryX = ab.Months, AbsentSummaryY = Convert.ToInt32(ab.Absents) });
}
var StudentDetailsL = CtxSM.SMISGet_StudentAttendanceDetailsByStudentId(StudentId, SessionDataManager.SessionData.LoginUserId, SessionDataManager.SessionData.AcademicYearID, SessionDataManager.SessionData.BusinessUnitId, ref outError).ToList();
var CountL = StudentDetailsL.Count();
var Leaves = StudentDetailsP.Select(p => new { p.Months, p.Leaves });
foreach (var ab in Leaves)
{
MT.Add(new StudentClass.ChartsPointsSummary { LeaveSummaryX = ab.Months, LeaveSummaryY = Convert.ToInt32(ab.Leaves) });
}
return MT;
}
#Html.DevExpress().Chart(settings =>
{
settings.Name = "SummaryDetailsById";
settings.Width = 1032;
settings.Height = 250;
Series chartSeries = new Series("Presents", DevExpress.XtraCharts.ViewType.Bar);
chartSeries.ArgumentDataMember = "PresentSummaryX";
chartSeries.ValueDataMembers[0] = "PresentSummaryY";
settings.Series.Add(chartSeries);
Series chartSeries2 = new Series("Absents", DevExpress.XtraCharts.ViewType.Bar);
chartSeries2.ArgumentDataMember = "AbsentSummaryX";
chartSeries2.ValueDataMembers[0] = "AbsentSummaryY";
settings.Series.Add(chartSeries2);
Series chartSeries3 = new Series("Leaves", DevExpress.XtraCharts.ViewType.Bar);
chartSeries3.ArgumentDataMember = "LeaveSummaryX";
chartSeries3.ValueDataMembers[0] = "LeaveSummaryY";
settings.Series.Add(chartSeries3);
settings.CrosshairEnabled = DefaultBoolean.Default;
settings.BackColor = System.Drawing.Color.Transparent;
settings.BorderOptions.Visibility = DefaultBoolean.True;
settings.Titles.Add(new ChartTitle()
{
Text = "Student Attendance Summary"
});
XYDiagram diagram = ((XYDiagram)settings.Diagram);
diagram.AxisX.Label.Angle = -30;
diagram.AxisY.Interlaced = true;
}).Bind(Model).GetHtml()
I am using open XML SDK and I want to move the content of content control (containing images) from the header to the body, the problem that images does not show after moving. After copying the content control content I am adding the image parts in this way :
foreach (var headerPart in wordDocument.MainDocumentPart.HeaderParts)
{
SdtBlock sdtToSave = this.FindSdtBlock(contentControlTag, headerPart );
if (sdtToSave != null)
{
foreach (var imagePart in headerPart.ImageParts)
{
ImagePart newPart = mainPart.AddImagePart(imagePart.ContentType);
this.GenerateImagePartContent(newPart, imagePart.GetStream()); }
}
}
private void GenerateImagePartContent(ImagePart imagePart, Stream partStream)
{
imagePart.FeedData(partStream);
partStream.Close();
}
then if I add this lines :
Paragraph paragraph = sdtToSave.SdtContentBlock.GetFirstChild<Paragraph>();
Run run = new Run();
paragraph.Append(run);
run.Append(this.GenerateDrawing(mainPart.GetIdOfPart(newPart)));
private Drawing GenerateDrawing(String relationshipID)
{
Drawing drawing1 = new Drawing();
Inline inline1 = new Inline() { DistanceFromTop = (UInt32Value)0U, DistanceFromBottom = (UInt32Value)0U, DistanceFromLeft = (UInt32Value)0U, DistanceFromRight = (UInt32Value)0U };
Extent extent1 = new Extent() { Cx = 152400L, Cy = 152400L };
EffectExtent effectExtent1 = new EffectExtent() { LeftEdge = 0L, TopEdge = 0L, RightEdge = 0L, BottomEdge = 0L };
DocProperties docProperties1 = new DocProperties() { Id = (UInt32Value)1U, Name = "Image 1" };
NonVisualGraphicFrameDrawingProperties nonVisualGraphicFrameDrawingProperties1 = new NonVisualGraphicFrameDrawingProperties();
A.GraphicFrameLocks graphicFrameLocks1 = new A.GraphicFrameLocks() { NoChangeAspect = true };
graphicFrameLocks1.AddNamespaceDeclaration("a", "http://schemas.openxmlformats.org/drawingml/2006/main");
nonVisualGraphicFrameDrawingProperties1.Append(graphicFrameLocks1);
A.Graphic graphic1 = new A.Graphic();
graphic1.AddNamespaceDeclaration("a", "http://schemas.openxmlformats.org/drawingml/2006/main");
A.GraphicData graphicData1 = new A.GraphicData() { Uri = "http://schemas.openxmlformats.org/drawingml/2006/picture" };
Pic.Picture picture1 = new Pic.Picture();
picture1.AddNamespaceDeclaration("pic", "http://schemas.openxmlformats.org/drawingml/2006/picture");
Pic.NonVisualPictureProperties nonVisualPictureProperties1 = new Pic.NonVisualPictureProperties();
Pic.NonVisualDrawingProperties nonVisualDrawingProperties1 = new Pic.NonVisualDrawingProperties() { Id = (UInt32Value)0U, Name = "AddTo_Blink.png" };
Pic.NonVisualPictureDrawingProperties nonVisualPictureDrawingProperties1 = new Pic.NonVisualPictureDrawingProperties();
nonVisualPictureProperties1.Append(nonVisualDrawingProperties1);
nonVisualPictureProperties1.Append(nonVisualPictureDrawingProperties1);
Pic.BlipFill blipFill1 = new Pic.BlipFill();
A.Blip blip1 = new A.Blip() { Embed = relationshipID };
A.BlipExtensionList blipExtensionList1 = new A.BlipExtensionList();
A.BlipExtension blipExtension1 = new A.BlipExtension() { Uri = "{28A0092B-C50C-407E-A947-70E740481C1C}" };
A14.UseLocalDpi useLocalDpi1 = new A14.UseLocalDpi() { Val = false };
useLocalDpi1.AddNamespaceDeclaration("a14", "http://schemas.microsoft.com/office/drawing/2010/main");
blipExtension1.Append(useLocalDpi1);
blipExtensionList1.Append(blipExtension1);
blip1.Append(blipExtensionList1);
A.Stretch stretch1 = new A.Stretch();
A.FillRectangle fillRectangle1 = new A.FillRectangle();
stretch1.Append(fillRectangle1);
blipFill1.Append(blip1);
blipFill1.Append(stretch1);
Pic.ShapeProperties shapeProperties1 = new Pic.ShapeProperties();
A.Transform2D transform2D1 = new A.Transform2D();
A.Offset offset1 = new A.Offset() { X = 0L, Y = 0L };
A.Extents extents1 = new A.Extents() { Cx = 152400L, Cy = 152400L };
transform2D1.Append(offset1);
transform2D1.Append(extents1);
A.PresetGeometry presetGeometry1 = new A.PresetGeometry() { Preset = A.ShapeTypeValues.Rectangle };
A.AdjustValueList adjustValueList1 = new A.AdjustValueList();
presetGeometry1.Append(adjustValueList1);
shapeProperties1.Append(transform2D1);
shapeProperties1.Append(presetGeometry1);
picture1.Append(nonVisualPictureProperties1);
picture1.Append(blipFill1);
picture1.Append(shapeProperties1);
graphicData1.Append(picture1);
graphic1.Append(graphicData1);
inline1.Append(extent1);
inline1.Append(effectExtent1);
inline1.Append(docProperties1);
inline1.Append(nonVisualGraphicFrameDrawingProperties1);
inline1.Append(graphic1);
drawing1.Append(inline1);
return drawing1;
}
all images are shown at the end of body.
From the OXML SDK productivity tool I can see that bookmarks are used to insert images inside a paragraph.
To summarize, I want to know how to keep images when moving content controls from header to the body.
Regards.
When you add your image part to the mainPart, it will be given a relId which is unlikely to be the same as the relId it had in the headerPart. So you'll have to adjust the relId in the drawing (Embed = relationshipID) to match.