I have uploaded archived and uploaded my app and updated the information in Itunes yesterday and today i have added the screenshots. everything is ready but this error Build has sucked my brain. I dont know why this is happening. Help me to get rid of this.
Re-archived error
In the project navigator on xCode, click on general and increase the version number and build number. This usually happens when you've uploaded a build with a version number or build number lower to the one you're uploading now before. And the one you've uploaded earlier is probably not showing because of an error. Check you're email if any were received from iTunes Connect. It might be an error with privacy in your .plist, if you use photos, camera, location, etc..
Check your all builds available in testFlight, is your latest uploaded build present there?
Bump the version number and the build number on Xcode and then archive again. Remember than the iTunes Connect application version you're trying to upload has to be the same as the the Xcode version. So if you bump your app to 1.0.1 on Xcode, be sure to do the same on iTunes Connect.
Then upload your build on iTunes Connect.
Hope this help.
Related
I am trying to upload an app to the app store. I have uploaded the app to apple connect but am unable to choose the build.
I did a little research and found that you are supposed to press a plus sign next to the build to choose the correct build, but there is no plus sign.
How should I choose my build?
I have seen this before when I’ve submitted builds to AppStore connect. Make sure the version number matches that of the version you are showing on your apps release/description. If this does not match you won’t be able to attach that build to that version because the App Store does not think it belongs.
You can check the “version history” tab in your App Store setup to see what the status of that version build is. When it’s done processing you will be able to add the build as long as that version matches what your preparing.
When you upload a build to app store it generally takes around 10-15 mins to process the build. You can check for the same in the Testflight tab of the itunesConnect.
Once it is processed then and then only it will be available for selecting with a plus button.
So, either way, you need to choose the build.
Possible ways you can upload build to AppStore
Using XCode
Using Transporter
Reasons the build maybe not available in AppStore after upload
Your build has some issues, in this case you will get an email notification as build rejection
If you are uploading some build with different versions.
So i have uploaded the app via xcode however when i go to submit the app via appstoreconnect.apple.com i get the following error.
but when i go to re-upload it, seems it is already uploaded. So what have I missed.
It says it has been delivered - is there a processing time?
The answer is right on the screen in the image you uploaded. You've already uploaded a binary with the same BUILD #.
Log into iTunes Connect and either select the uploaded build... it will take a few minutes to process before it is available, OR if you have invalidated that and are uploading a new one. Go to you Project in Xcode and on the General Tab for the Target, bump the build number.
i'm trying to upgrade an iOs App on the App Store by releasing a new version. I've the iTunes Connect Account and I'm working on Xcode.
I've updated the Version and Build values from 1.0.15 to 1.0.16 in the Identity Section of my app *-Info.plist
Then I uploaded the build to the iTunes Connect from Xcode by doing:
Product -> Archive -> Validate -> and then Upload to the App Store...->
I selected the automatic signing authentication and chosen the App Team for profiling that I want the build to be uploaded to.
Xcode has uploaded the build to the iTunes Connect and no error have been thrown.
Now, when I go to my iOs build on the App Store, I expect to find it, but there isn't.
When I upload it again I now have this error:
It seems that the Apple Server already got the release.
So? Where is my build gone? How can I found it?
I read in some SO threads that there was a Prerelease View in the iTunes Connect but I'm unable to find it any more. Maybe it has been replaced?
EDIT 1
This is my Build iOs on iTunes Connect view.
The open tab is the previous build, my new one 1.0.16 it is not present in the list and I can't find it anywhere..
I knew that I could upload a newer version by incrementing the version and build.
If it will not appear soon I will assume an error occurred and try to submit a new one.
EDIT 2
One week has passed and the build hasn't appeared. So I have uploaded a new upgraded version to 1.0.17, but it's still not appearing in my activity tab.
I would like to point out that before loading the previus 1.0.16 version, I had already created a new app version in the App Store Tab.
Can this possibly causes the issue?
What else can it be?
I'm gonna wait a little more and if not appearing i'll open a support ticket.
Solution: check your email !
After days of waiting I discovered that my iTunes Connect associated email address had received feedback from the iTunes Store Team. The emails said there was issues on the app (Missing Info.plist key) that prevented the delivery to be processed.
It is important to check your email address from apple communications because some of that information cannot be found elsewhere!
If the build is uploaded to appstore, then it will take some time normally. In the mean time You can see your newly uploaded build in the activity section under the version of the app with a processing label in brackets(see ).
Once uploaded build with a version number and build number cannot be uploaded to appstore again.If you want to upload new build to appstore, then either change the version or build number and try again.
On iTunes Connect website, under build, I have no plus sign. My builds are not appearing.
Version number in the general tab (for the heck of it, build number too) are the same as in my iTunes Connect profile.
I archived an ipa in xcode 7.2 and uploaded to appstore successfully. However it does not appear in the app profile I created under build.
I also used the independent iTunes Connect app which also uploaded the ipa successfully, but it also does not appear in build section on website.
Any ideas what could be causing this issue?
iTunesConnect could be slow and buggy at times.
I encountered the same issue. Couldn't see it for 30+ minutes. Turned off my laptop, went to bed and the next morning it was there.
There will be having some issues with your uploaded build so you can just make appeal to App store technical team with your app id.
They will provide you guide and reason for not showing your build into itunesconnect.
Thanks for the advice. I never contacted Apple, but after 48 hours Apple finally contacted me via email saying that there are swift files that are not supported.
Wonderful. Thanks apple. Personal opinion: should have stayed with Objective-C. But I guess that solves the issue why it was not displaying under the build section on iTunes Connect.
I'm publishing my first Xamarin.iOS app to the store. I've set up my distribution profiles, set up the app on iTunes connect, and all seems well. I published my app for archiving and then successfully uploaded via the Application Loader.
What's broke is that iTunes Connect doesn't see my app - it says I still need to upload via Xcode or Application Loader... but when I try to upload my IPA (again) via the Application loader ("sign and distribute" via Xamarin), I get the error "ERROR ITMS-4238: "Redundant Binary Upload. There already exists a binary upload with build version '1.0' for train '1.0'" at SoftwareAssets/PreReleaseSoftwareAsset."
I don't see an option in ITunesConnect to delete this build and start over with another version, and it won't let me Submit for Review because it doesn't see the build as being uploaded.
I've opened a ticket with Apple over a week ago and haven't heard back. I know I could go with a different AppId but for all I know I'll hit the same wall. Anybody been down this road?
UPDATE #1
I've created version 1.1 of my app and uploaded it successfully to ITC. I see it in the Builds section (still don't see 1.0) but I can't add a new version of the app to "link" this build to because v1.0 is still "Preparing to Submit"
Apps - unable to create v1.1 while v1.0 is "Preparing to Submit."
Builds - v1.0 is not visible, but if I try to reupload ITC says it's there
UPDATE #2
I was able to link v1.0 of my app store submission to v1.1 build and submit the app for review. I don't know if this will go through or not, but it was at least submitted. I am now also able to "reject" this version, but if I do this I'm unable to add another version still (if I wanted to get a clean v1.1).
Each build you upload must have a unique build number. So if you upload 1.0 then the next must be 1.1 etc. What I do is keep the internal test builds with an extra .1 at the end so my internal would be 1.1.1, 1.1.2 etc and then I'll push 1.2 to the store when ready. You can also change the version number on your App's settings on iTunes Connect. They wont reject it as it's just the build number.