Neo4J browser with Bolt protocol does not work on my server.
Here is the error I get in the browser (Chrome):
VM608:35 WebSocket connection to 'ws://<server_name>:7687/' failed: Error during WebSocket handshake: net::ERR_CONNECTION_RESET
WrappedWebSocket # VM608:35
l # 8eea4b31.components.js:61
c # 8eea4b31.components.js:61
value # 8eea4b31.components.js:60
value # 8eea4b31.components.js:61
value # 8eea4b31.components.js:60
value # 8eea4b31.components.js:60
testConnection # 248a7ab3.scripts.js:10
makeRequest # 248a7ab3.scripts.js:11
AuthService.makeRequest # 248a7ab3.scripts.js:5
AuthService.authenticate # 248a7ab3.scripts.js:5
(anonymous) # 248a7ab3.scripts.js:9
$scope.authenticate # 248a7ab3.scripts.js:5
(anonymous) # 8eea4b31.components.js:13
callback # 8eea4b31.components.js:13
$eval # 8eea4b31.components.js:11
$apply # 8eea4b31.components.js:11
(anonymous) # 8eea4b31.components.js:13
dispatch # 8eea4b31.components.js:3
elemData.handle # 8eea4b31.components.js:3
And here is the error in Neo4J logs on the server:
2017-05-23 16:43:11.130+0000 WARN [io.netty.channel.DefaultChannelPipeline] An exceptionCaught() event was fired, and it reached at the tail of the pipeline. It usually means the last handler in the pipeline did not handle the exception. Connection reset by peer
java.io.IOException: Connection reset by peer
at sun.nio.ch.FileDispatcherImpl.read0(Native Method)
at sun.nio.ch.SocketDispatcher.read(SocketDispatcher.java:39)
at sun.nio.ch.IOUtil.readIntoNativeBuffer(IOUtil.java:223)
at sun.nio.ch.IOUtil.read(IOUtil.java:192)
at sun.nio.ch.SocketChannelImpl.read(SocketChannelImpl.java:380)
at io.netty.buffer.PooledUnsafeDirectByteBuf.setBytes(PooledUnsafeDirectByteBuf.java:288)
at io.netty.buffer.AbstractByteBuf.writeBytes(AbstractByteBuf.java:1100)
at io.netty.channel.socket.nio.NioSocketChannel.doReadBytes(NioSocketChannel.java:366)
at io.netty.channel.nio.AbstractNioByteChannel$NioByteUnsafe.read(AbstractNioByteChannel.java:118)
at io.netty.channel.nio.NioEventLoop.processSelectedKey(NioEventLoop.java:651)
at io.netty.channel.nio.NioEventLoop.processSelectedKeysOptimized(NioEventLoop.java:574)
at io.netty.channel.nio.NioEventLoop.processSelectedKeys(NioEventLoop.java:488)
at io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:450)
at io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:873)
at java.lang.Thread.run(Thread.java:745)
I tried to search for this error but didn't find a solution.
Following is the network part of Neo4J configuration:
#*****************************************************************
# Network connector configuration
#*****************************************************************
# With default configuration Neo4j only accepts local connections.
# To accept non-local connections, uncomment this line:
dbms.connectors.default_listen_address=0.0.0.0
# You can also choose a specific network interface, and configure a non-default
# port for each connector, by setting their individual listen_address.
# The address at which this server can be reached by its clients. This may be the server's IP address or DNS name, or
# it may be the address of a reverse proxy which sits in front of the server. This setting may be overridden for
# individual connectors below.
#dbms.connectors.default_advertised_address=localhost
# You can also choose a specific advertised hostname or IP address, and
# configure an advertised port for each connector, by setting their
# individual advertised_address.
# Bolt connector
dbms.connector.bolt.enabled=true
#dbms.connector.bolt.tls_level=OPTIONAL
dbms.connector.bolt.listen_address=:7687
# HTTP Connector. There must be exactly one HTTP connector.
dbms.connector.http.enabled=true
#dbms.connector.http.listen_address=:7474
# HTTPS Connector. There can be zero or one HTTPS connectors.
dbms.connector.https.enabled=true
#dbms.connector.https.listen_address=:7473
# Number of Neo4j worker threads.
#dbms.threads.worker_count=
I made Neo4J accessible from outside by telling it to listen on 0.0.0.0.
I used telnet <server_name> 7687 to check the port was opened and it is.
If I disable Bolt it is working fine.
Does someone has an idea about what is going wrong?
Related
Mosquitto has an extensive logging mechanism. But it seems it only can log against syslog.
Is there a way to get logs captured in the systemd's jounal without running it as a service?
Note: mosquito runs inside a docker container
mosquitto.conf logging section is:
# =================================================================
# Logging
# =================================================================
# Places to log to. Use multiple log_dest lines for multiple
# logging destinations.
# Possible destinations are: stdout stderr syslog topic file dlt
#
# stdout and stderr log to the console on the named output.
#
# syslog uses the userspace syslog facility which usually ends up
# in /var/log/messages or similar.
#
# topic logs to the broker topic '$SYS/broker/log/<severity>',
# where severity is one of D, E, W, N, I, M which are debug, error,
# warning, notice, information and message. Message type severity is used by
# the subscribe/unsubscribe log_types and publishes log messages to
# $SYS/broker/log/M/susbcribe or $SYS/broker/log/M/unsubscribe.
#
# The file destination requires an additional parameter which is the file to be
# logged to, e.g. "log_dest file /var/log/mosquitto.log". The file will be
# closed and reopened when the broker receives a HUP signal. Only a single file
# destination may be configured.
#
# The dlt destination is for the automotive `Diagnostic Log and Trace` tool.
# This requires that Mosquitto has been compiled with DLT support.
#
# Note that if the broker is running as a Windows service it will default to
# "log_dest none" and neither stdout nor stderr logging is available.
# Use "log_dest none" if you wish to disable logging.
log_dest syslog
log_dest file /var/log/mosquitto/mosquitto.log
# Types of messages to log. Use multiple log_type lines for logging
# multiple types of messages.
# Possible types are: debug, error, warning, notice, information,
# none, subscribe, unsubscribe, websockets, all.
# Note that debug type messages are for decoding the incoming/outgoing
# network packets. They are not logged in "topics".
#log_type error
#log_type warning
#log_type notice
log_type all
# If set to true, client connection and disconnection messages will be included
# in the log.
#connection_messages true
# If using syslog logging (not on Windows), messages will be logged to the
# "daemon" facility by default. Use the log_facility option to choose which of
# local0 to local7 to log to instead. The option value should be an integer
# value, e.g. "log_facility 5" to use local5.
log_facility 5
# If set to true, add a timestamp value to each log message.
#log_timestamp true
# Set the format of the log timestamp. If left unset, this is the number of
# seconds since the Unix epoch.
# This is a free text string which will be passed to the strftime function. To
# get an ISO 8601 datetime, for example:
# log_timestamp_format %Y-%m-%dT%H:%M:%S
#log_timestamp_format
# Change the websockets logging level. This is a global option, it is not
# possible to set per listener. This is an integer that is interpreted by
# libwebsockets as a bit mask for its lws_log_levels enum. See the
# libwebsockets documentation for more details. "log_type websockets" must also
# be enabled.
#websockets_log_level 0
Because of log_dest syslog is specified, logging to syslog should be enabled, shouldn't it?
There are logs of mosquitto in /var/log/syslog:
Nov 17 23:08:29 raspberrypi mosquitto[40]: 1668726509: Opening ipv6 listen socket on port 1883.
Nov 17 23:08:29 raspberrypi mosquitto[40]: 1668726509: Opening ipv4 listen socket on port 1883.
Nov 17 23:08:29 raspberrypi mosquitto[40]: 1668726509: Opening websockets listen socket on port 9001.
Nov 17 23:08:29 raspberrypi mosquitto[40]: 1668726509: mosquitto version 2.0.15 running
...
Nov 30 12:12:18 raspberrypi mosquitto[39]: 1669810338: Sending PUBLISH to shell (d0, q0, r0, m0, '$SYS/broker/load/bytes/sent/1min', ... (4 bytes))
Nov 30 12:12:29 raspberrypi mosquitto[39]: 1669810349: Sending PUBLISH to shell (d0, q0, r0, m0, '$SYS/broker/load/bytes/sent/1min', ... (4 bytes))
Nov 30 12:12:40 raspberrypi mosquitto[39]: 1669810360: Sending PUBLISH to shell (d0, q0, r0, m0, '$SYS/broker/load/bytes/sent/1min', ... (4 bytes))
But they do not end up in the journal. I suspect it is because no systemd init is running. Can this be worked around?
Just configure mosquitto to log to syslog and it will end up in the journal.
Settings log_dest syslog should just work.
Edit for clarity.
This works on my Fedora 36 machine where journald appears to be consuming syslogd messages as can be seen by running journalctl -f -t mosquitto which output the usual mosquitto startup log info.
I want to display nginx logs on kibana.
Elastic search and kibana are running fine.
Nginx logs are stored in /var/log/nginx/*.log
I installed filebeat and enbled the nginx service with it.
filebeat.yml
###################### Filebeat Configuration Example #########################
# This file is an example configuration file highlighting only the most common
# options. The filebeat.reference.yml file from the same directory contains all the
# supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html
# For more available modules and options, please see the filebeat.reference.yml sample
# configuration file.
# ============================== Filebeat inputs ===============================
filebeat.inputs:
# Each - is an input. Most options can be set at the input level, so
# you can use different inputs for various configurations.
# Below are the input specific configurations.
# filestream is an input for collecting log messages from files.
- type: filestream
# Change to true to enable this input configuration.
enabled: false
# Paths that should be crawled and fetched. Glob based paths.
paths:
- /var/log/*.log
#- c:\programdata\elasticsearch\logs\*
# Exclude lines. A list of regular expressions to match. It drops the lines that are
# matching any regular expression from the list.
#exclude_lines: ['^DBG']
# Include lines. A list of regular expressions to match. It exports the lines that are
# matching any regular expression from the list.
#include_lines: ['^ERR', '^WARN']
# Exclude files. A list of regular expressions to match. Filebeat drops the files that
# are matching any regular expression from the list. By default, no files are dropped.
#prospector.scanner.exclude_files: ['.gz$']
# Optional additional fields. These fields can be freely picked
# to add additional information to the crawled log files for filtering
#fields:
# level: debug
# review: 1
# ============================== Filebeat modules ==============================
filebeat.config.modules:
# Glob pattern for configuration loading
path: ${path.config}/modules.d/*.yml
# Set to true to enable config reloading
reload.enabled: false
# Period on which files under path should be checked for changes
#reload.period: 10s
# ======================= Elasticsearch template setting =======================
setup.template.settings:
index.number_of_shards: 1
#index.codec: best_compression
#_source.enabled: false
# ================================== General ===================================
# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
#name:
# The tags of the shipper are included in their own field with each
# transaction published.
#tags: ["service-X", "web-tier"]
# Optional fields that you can specify to add additional information to the
# output.
#fields:
# env: staging
# ================================= Dashboards =================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards is disabled by default and can be enabled either by setting the
# options here or by using the `setup` command.
#setup.dashboards.enabled: false
# The URL from where to download the dashboards archive. By default this URL
# has a value which is computed based on the Beat name and version. For released
# versions, this URL points to the dashboard archive on the artifacts.elastic.co
# website.
#setup.dashboards.url:
# =================================== Kibana ===================================
# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:
# Kibana Host
# Scheme and port can be left out and will be set to the default (http and 5601)
# In case you specify and additional path, the scheme is required: http://localhost:5601/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
host: "localhost:3000"
# Kibana Space ID
# ID of the Kibana Space into which the dashboards should be loaded. By default,
# the Default Space will be used.
#space.id:
# =============================== Elastic Cloud ================================
# These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).
# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:
###################### Filebeat Configuration Example #########################
# This file is an example configuration file highlighting only the most common
# options. The filebeat.reference.yml file from the same directory contains all the
# supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html
# For more available modules and options, please see the filebeat.reference.yml sample
# configuration file.
# ============================== Filebeat inputs ===============================
filebeat.inputs:
# Each - is an input. Most options can be set at the input level, so
# you can use different inputs for various configurations.
# Below are the input specific configurations.
# filestream is an input for collecting log messages from files.
- type: filestream
# Change to true to enable this input configuration.
enabled: false
# Paths that should be crawled and fetched. Glob based paths.
paths:
- /var/log/*.log
#- c:\programdata\elasticsearch\logs\*
# Exclude lines. A list of regular expressions to match. It drops the lines that are
# matching any regular expression from the list.
#exclude_lines: ['^DBG']
# Include lines. A list of regular expressions to match. It exports the lines that are
# matching any regular expression from the list.
#include_lines: ['^ERR', '^WARN']
# Exclude files. A list of regular expressions to match. Filebeat drops the files that
# are matching any regular expression from the list. By default, no files are dropped.
#prospector.scanner.exclude_files: ['.gz$']
# Optional additional fields. These fields can be freely picked
# to add additional information to the crawled log files for filtering
#fields:
# level: debug
# review: 1
# ============================== Filebeat modules ==============================
filebeat.config.modules:
# Glob pattern for configuration loading
path: ${path.config}/modules.d/*.yml
# Set to true to enable config reloading
reload.enabled: false
# Period on which files under path should be checked for changes
#reload.period: 10s
# ======================= Elasticsearch template setting =======================
setup.template.settings:
index.number_of_shards: 1
#index.codec: best_compression
#_source.enabled: false
# ================================== General ===================================
# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
#name:
# The tags of the shipper are included in their own field with each
# transaction published.
#tags: ["service-X", "web-tier"]
# Optional fields that you can specify to add additional information to the
# output.
#fields:
# env: staging
# ================================= Dashboards =================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards is disabled by default and can be enabled either by setting the
# options here or by using the `setup` command.
#setup.dashboards.enabled: false
# The URL from where to download the dashboards archive. By default this URL
# has a value which is computed based on the Beat name and version. For released
# versions, this URL points to the dashboard archive on the artifacts.elastic.co
# website.
#setup.dashboards.url:
# =================================== Kibana ===================================
# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:
# Kibana Host
# Scheme and port can be left out and will be set to the default (http and 5601)
# In case you specify and additional path, the scheme is required: http://localhost:5601/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
host: "localhost:3000"
# Kibana Space ID
# ID of the Kibana Space into which the dashboards should be loaded. By default,
# the Default Space will be used.
#space.id:
# =============================== Elastic Cloud ================================
# These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).
# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:
# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:
# ================================== Outputs ===================================
# Configure what output to use when sending the data collected by the beat.
# ---------------------------- Elasticsearch Output ----------------------------
output.elasticsearch:
# Array of hosts to connect to.
hosts: ["localhost:9200"]
# Protocol - either `http` (default) or `https`.
#protocol: "https"
# Authentication credentials - either API key or username/password.
#api_key: "id:api_key"
#username: "temp"
#password: "temp#1234"
# ------------------------------ Logstash Output -------------------------------
#output.logstash:
# The Logstash hosts
#hosts: ["localhost:5044"]
# Optional SSL. By default is off.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"
# Client Certificate Key
#ssl.key: "/etc/pki/client/cert.key"
# ================================= Processors =================================
processors:
- add_host_metadata:
when.not.contains.tags: forwarded
- add_cloud_metadata: ~
- add_docker_metadata: ~
- add_kubernetes_metadata: ~
# ================================== Logging ===================================
# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: debug
# At debug level, you can selectively enable logging only for some components.
# To enable all selectors use ["*"]. Examples of other selectors are "beat",
# "publisher", "service".
#logging.selectors: ["*"]
# ============================= X-Pack Monitoring ==============================
# Filebeat can export internal metrics to a central Elasticsearch monitoring
# cluster. This requires xpack monitoring to be enabled in Elasticsearch. The
# reporting is disabled by default.
# Set to true to enable the monitoring reporter.
#monitoring.enabled: false
# Sets the UUID of the Elasticsearch cluster under which monitoring data for this
# Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch
# is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.
#monitoring.cluster_uuid:
# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well.
# Note that the settings should point to your Elasticsearch *monitoring* cluster.
# Any setting that is not set is automatically inherited from the Elasticsearch
# output configuration, so if you have the Elasticsearch output configured such
# that it is pointing to your Elasticsearch monitoring cluster, you can simply
# uncomment the following line.
#monitoring.elasticsearch:
# ============================== Instrumentation ===============================
# Instrumentation support for the filebeat.
#instrumentation:
# Set to true to enable instrumentation of filebeat.
#enabled: false
# Environment in which filebeat is running on (eg: staging, production, etc.)
#environment: ""
# APM Server hosts to report instrumentation results to.
#hosts:
# - http://localhost:8200
# API Key for the APM Server(s).
# If api_key is set then secret_token will be ignored.
#api_key:
# Secret token for the APM Server(s).
#secret_token:
# ================================= Migration ==================================
# This allows to enable 6.7 migration aliases
#migration.6_to_7.enabled: true
And /etc/filebeat/modules/nginx.yml file
# Module: nginx
# Module: nginx
access:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
var.paths: ["var/logs/nginx/*access.log"]
# Error logs
error:
enabled: true
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
var.paths: ["var/logs/nginx/*error.log"]
# Ingress-nginx controller logs. This is disabled by default. It could be used in Kubernetes environments to parse ingress-nginx logs
ingress_controller:
enabled: false
# Set custom paths for the log files. If left empty,
# Filebeat will choose the paths depending on your OS.
#var.paths:
after i run filebeat setup -e command I got the following output
2021-12-18T19:19:44.352+0530 INFO cfgfile/reload.go:262 Loading of config files completed.
2021-12-18T19:19:44.352+0530 INFO [load] cfgfile/list.go:129 Stopping 2 runners ...
Loaded Ingest pipelines
After this when i run systemctl restart filebeat
I got the following error
● filebeat.service - Filebeat sends log files to Logstash or directly to Elasticsearch.
Loaded: loaded (/usr/lib/systemd/system/filebeat.service; enabled; vendor preset: disabled)
Active: failed (Result: start-limit) since Sat 2021-12-18 19:03:53 IST; 17min ago
Docs: https://www.elastic.co/beats/filebeat
Main PID: 49606 (code=exited, status=1/FAILURE)
Dec 18 19:03:53 ip-10-249-5-178.ap-south-1.compute.internal systemd[1]: Unit filebeat.service entered failed state.
Dec 18 19:03:53 ip-10-249-5-178.ap-south-1.compute.internal systemd[1]: filebeat.service failed.
Dec 18 19:03:53 ip-10-249-5-178.ap-south-1.compute.internal systemd[1]: filebeat.service holdoff time over, scheduling restart.
Dec 18 19:03:53 ip-10-249-5-178.ap-south-1.compute.internal systemd[1]: Stopped Filebeat sends log files to Logstash or directly to Elasticsearch..
Dec 18 19:03:53 ip-10-249-5-178.ap-south-1.compute.internal systemd[1]: start request repeated too quickly for filebeat.service
Dec 18 19:03:53 ip-10-249-5-178.ap-south-1.compute.internal systemd[1]: Failed to start Filebeat sends log files to Logstash or directly to Elasticsearch..
Dec 18 19:03:53 ip-10-249-5-178.ap-south-1.compute.internal systemd[1]: Unit filebeat.service entered failed state.
Dec 18 19:03:53 ip-10-249-5-178.ap-south-1.compute.internal systemd[1]: filebeat.service failed.
Any help ??
Solved by deleting the file
rm -r /var/lib/filebeat/registry
Don't know the reason behind it but after this the service started successfully.
I'm trying to build a IoT home network using MQTT but have fallen at the first hurdle. I'm going round in circies!
I'm running mosquitto on a Pi, but can't connect to it from an Arduino. I can connect from MQTT.fx running on a windows laptop though on the same LAN.
Arduino code below: I've run this with the test.mosquitto.org server address (85.119.83.194) and the local address of the Pi (192.168.1.200). Mosquitto connects but it fails to connect directly to the Pi.
Is the issue with my router??? Any suggestions really welcome!!!!
#include <SPI.h>
#include <Ethernet.h>
#include <PubSubClient.h>
// Update these with values suitable for your network.
byte mac[] = { 0xDE, 0xED, 0xBA, 0xFE, 0xFE, 0xED };
byte server[] = { 192, 168, 1, 200};
byte ip[] = { 192, 168, 1, 61 };
void callback(char* topic, byte* payload, unsigned int length) {
// handle message arrived
Serial.println("Message received");
}
EthernetClient ethClient;
PubSubClient client(server, 1883, callback, ethClient);
void setup()
{
Ethernet.begin(mac, ip);
Serial.begin(9600);
Serial.println("Ethernet Begin");
if (client.connect("arduinoClient")) {
Serial.println("Client connected");
client.subscribe("/notification/turnlighton");
}
else{
Serial.println("Client not connected");
}
}
void loop()
{
client.loop();
}
Conf file:
# Config file for mosquitto
#
# See mosquitto.conf(5) for more information.
#
# Default values are shown, uncomment to change.
#
# Use the # character to indicate a comment, but only if it is the
# very first character on the line.
# =================================================================
# General configuration
# =================================================================
# Time in seconds to wait before resending an outgoing QoS=1 or
# QoS=2 message.
#retry_interval 20
# Time in seconds between updates of the $SYS tree.
#sys_interval 10
# Time in seconds between cleaning the internal message store of
# unreferenced messages. Lower values will result in lower memory
# usage but more processor time, higher values will have the
# opposite effect.
# Setting a value of 0 means the unreferenced messages will be
# disposed of as quickly as possible.
#store_clean_interval 10
# Write process id to a file. Default is a blank string which means
# a pid file shouldn't be written.
# This should be set to /var/run/mosquitto.pid if mosquitto is
# being run automatically on boot with an init script and
# start-stop-daemon or similar.
#pid_file
# When run as root, drop privileges to this user and its primary
# group.
# Leave blank to stay as root, but this is not recommended.
# If run as a non-root user, this setting has no effect.
# Note that on Windows this has no effect and so mosquitto should
# be started by the user you wish it to run as.
#user mosquitto
# The maximum number of QoS 1 and 2 messages currently inflight per
# client.
# This includes messages that are partway through handshakes and
# those that are being retried. Defaults to 10. Set to 0 for no
# maximum. Setting to 1 will guarantee in-order delivery of QoS 1
# and 2 messages.
#max_inflight_messages 10
# The maximum number of QoS 1 and 2 messages to hold in a queue
# above those that are currently in-flight. Defaults to 100. Set
# to 0 for no maximum (not recommended).
#max_queued_messages 100
# =================================================================
# Default listener
# =================================================================
# IP address/hostname to bind the default listener to. If not
# given, the default listener will not be bound to a specific
# address and so will be accessible to all network interfaces.
# bind_address ip-address/host name
#bind_address
# Port to use for the default listener.
#port 1883
# The maximum number of client connections to allow. This is
# a per listener setting.
# Default is -1, which means unlimited connections.
# Note that other process limits mean that unlimited connections
# are not really possible. Typically the default maximum number of
# connections possible is around 1024.
#max_connections -1
# =================================================================
# Extra listeners
# =================================================================
# Listen on a port/ip address combination. By using this variable
# multiple times, mosquitto can listen on more than one port. If
# this variable is used and neither bind_address nor port given,
# then the default listener will not be started.
# The port number to listen on must be given. Optionally, an ip
# address or host name may be supplied as a second argument. In
# this case, mosquitto will attempt to bind the listener to that
# address and so restrict access to the associated network and
# interface. By default, mosquitto will listen on all interfaces.
# listener port-number [ip address/host name]
#listener
# The maximum number of client connections to allow. This is
# a per listener setting.
# Default is -1, which means unlimited connections.
# Note that other process limits mean that unlimited connections
# are not really possible. Typically the default maximum number of
# connections possible is around 1024.
#max_connections -1
# The listener can be restricted to operating within a topic hierarchy using
# the mount_point option. This is achieved be prefixing the mount_point string
# to all topics for any clients connected to this listener. This prefixing only
# happens internally to the broker; the client will not see the prefix.
#mount_point
# =================================================================
# Persistence
# =================================================================
# If persistence is enabled, save the in-memory database to disk
# every autosave_interval seconds. If set to 0, the persistence
# database will only be written when mosquitto exits.
# Note that writing of the persistence database can be forced by
# sending mosquitto a SIGUSR1 signal.
#autosave_interval 1800
# Save persistent message data to disk (true/false).
# This saves information about all messages, including
# subscriptions, currently in-flight messages and retained
# messages.
# retained_persistence is a synonym for this option.
persistence true
# The filename to use for the persistent database, not including
# the path.
#persistence_file mosquitto.db
# Location for persistent database. Must include trailing /
# Default is an empty string (current directory).
# Set to /var/lib/mosquitto/ if running as a proper service.
persistence_location /var/lib/mosquitto/
# =================================================================
# Logging
# =================================================================
# Places to log to. Use multiple log_dest lines for multiple
# logging destinations.
# Possible destinations are: stdout stderr syslog topic
# stdout and stderr log to the console on the named output.
# syslog uses the userspace syslog facility which usually ends up
# in /var/log/messages or similar.
# topic logs to the broker topic '$SYS/broker/log/<severity>',
# where severity is one of D, E, W, N, I which are debug, error,
# warning, notice and information.
# Use "log_dest none" if you wish to disable logging.
log_dest none
# Types of messages to log. Use multiple log_type lines for logging
# multiple types of messages.
# Possible types are: debug, error, warning, notice, information,
# none.
# Note that debug type messages are for decoding the incoming
# network packets.
# They are not logged in syslog.
#log_type error
#log_type warning
#log_type notice
#log_type information
# If set to true, client connection and disconnection messages will be included
# in the log.
#connection_messages true
# If set to true, add a timestamp value to each log message.
#log_timestamp true
# =================================================================
# Security
# =================================================================
# If set, only clients that have a matching prefix on their
# clientid will be allowed to connect to the broker. By default,
# all clients may connect.
# For example, setting "secure-" here would mean a client "secure-
# client" could connect but another with clientid "mqtt" couldn't.
#clientid_prefixes
# Boolean value that determines whether clients that connect
# without providing a username are allowed to connect. If set to
# false then a password file should be created (see the
# password_file option) to control authenticated client access.
# Defaults to true.
#allow_anonymous true
# Control access to the broker using a password file. The file is a
# text file # of lines in the format:
# username:password
# The password (and colon) may be omitted if desired, although this
# offers very little in the way of security.
#password_file
# Control access to topics on the broker using an access control list
# file. If this parameter is defined then only the topics listed will
# have access.
# Topic access is added with lines of the format:
#
# topic [read|write] <topic>
#
# The access type is controlled using "read" or "write". This parameter
# is optional - if not given then the access is read/write.
# <topic> can contain the + or # wildcards as in subscriptions.
#
# The first set of topics are applied to anonymous clients, assuming
# allow_anonymous is true. User specific topic ACLs are added after a
# user line as follows:
#
# user <username>
#
# The username referred to here is the same as in password_file. It is
# not the clientid.
#
#
# If is also possible to define ACLs based on pattern substitution within the
# topic. The patterns available for substition are:
#
# %c to match the client id of the client
# %u to match the username of the client
#
# The substitution pattern must be the only text for that level of hierarchy.
#
# The form is the same as for the topic keyword, but using pattern as the
# keyword.
# Pattern ACLs apply to all users even if the "user" keyword has previously
# been given.
#
# pattern [read|write] <topic>
#
# Example:
#
# pattern write sensor/%u/data
#
#acl_file
# =================================================================
# Bridges
# =================================================================
# Experimental support for connecting multiple MQTT brokers
# together.
# Specify multiple sets of connection, address and topic
# configurations.
# Each connection must have a unique name.
# Only a single address per configuration is currently supported,
# unlike in rsmb.
# The direction that the topic will be shared can be chosen by
# specifying out, in or both, where the default value is out.
# The QoS level of the bridged communication can be specified with the final
# topic option. The default QoS level is 2, to change the QoS the topic
# direction must also be given.
# Multiple topics can be specified per connection, but be careful
# not to create any loops.
#connection <name>
#address <host>[:<port>]
#topic <topic> [[out | in | both] qos-level]
# Set the client id for this bridge connection. If not defined,
# this defaults to 'name.hostname' where name is the connection
# name and hostname is the hostname of this computer.
#clientid
# Set the clean session variable for this bridge.
# When set to true, when the bridge disconnects for any reason, all
# messages and subscriptions will be cleaned up on the remote
# broker. Note that with cleansession set to true, there may be a
# significant amount of retained messages sent when the bridge
# reconnects after losing its connection.
# When set to false, the subscriptions and messages are kept on the
# remote broker, and delivered when the bridge reconnects.
#cleansession false
# If set to true, publish notification messages to the local and remote brokers
# giving information about the state of the bridge connection. Retained
# messages are published to the topic $SYS/bridge/connection/<clientid>/state.
# If the message is 1 then the connection is active, or 0 if the connection has
# failed.
#notifications true
# Set the keepalive interval for this bridge connection, in
# seconds.
#keepalive_interval 60
# Set the start type of the bridge. This controls how the bridge starts and
# can be one of three types: automatic, lazy and once. Note that RSMB provides
# a fourth start type "manual" which isn't currently supported by mosquitto.
#
# "automatic" is the default start type and means that the bridge connection
# will be started automatically when the broker starts and also restarted
# after a short delay (30 seconds) if the connection fails.
#
# Bridges using the "lazy" start type will be started automatically when the
# number of queued messages exceeds the number set with the "threshold"
# parameter. It will be stopped automatically after the time set by the
# "idle_timeout" parameter. Use this start type if you wish the connection to
# only be active when it is needed.
#
# A bridge using the "once" start type will be started automatically when the
# broker starts but will not be restarted if the connection fails.
#start_type automatic
# Set the amount of time a bridge using the lazy start type must be idle before
# it will be stopped. Defaults to 60 seconds.
#idle_timeout 60
# Set the number of messages that need to be queued for a bridge with lazy
# start type to be restarted. Defaults to 10 messages.
# Must be less than max_queued_messages.
#threshold 10
# Set the username to use when connecting to an MQTT v3.1 broker
# that requires authentication.
#username
# Set the password to use when connecting to an MQTT v3.1 broker
# that requires authentication. This option is only used if
# username is also set.
#password
# =================================================================
# External security checks
# =================================================================
# This section defines options for potential use with external
# databases.
# They are intended to make it easier to add external security
# checks along with WITH_EXT_SECURITY_CHECKS. If you haven't written
# code to support another database and compiled support in, you are
# unlikely to need to change anything here.
# Database hostname.
#db_host
# Database port.
#db_port
# Database name.
#db_name
# Database username.
#db_username
# Database password.
#db_password
# =================================================================
# Unsupported rsmb options - for the future
# =================================================================
#autosave_on_changes
#addresses
#notification_topic
#round_robin
# =================================================================
# rsmb options - unlikely to ever be supported
# =================================================================
#ffdc_output
#max_log_entries
#trace_level
#trace_output
#try_private
I'm using the Elasti Cloud as it appears to be the most suitable for quickly setting up application logging. I have 24 docker container running in different nodes, and some containers have no of replicas also. i want to export inside docker container logs to elk stack.. I don't want to install Filebeat on each of my containers because that seems like it goes directly against Docker's separation of duties mantra.
.... how do I get logs from my application containers to log stash server
You can send your syslog to Logstash by configuring rsyslogd like this
# /etc/rsyslog.d/99-ship-syslog.conf
*.*;syslog;auth,authpriv.none action(
type="omfwd"
Target="myremote.elk-server.net"
Port="5001"
Protocol="udp"
)
If you don't have rsyslog running yet, you can add it like so (alpine linux example):
# Dockerfile
FROM alpine:3.7
RUN apk update \
&& apk add rsyslog
COPY rsyslog.conf /etc/rsyslog.conf
EXPOSE 514 514/udp
VOLUME [ "/var/log", "/etc/rsyslog.d" ]
ENTRYPOINT [ "rsyslogd", "-n" ]
--
# rsyslogd.conf
#
# if you experience problems, check:
# http://www.rsyslog.com/troubleshoot
#### MODULES ####
module(load="imuxsock") # local system logging support (e.g. via logger command)
#module(load="imklog") # kernel logging support (previously done by rklogd)
module(load="immark") # --MARK-- message support
module(load="imudp") # UDP listener support
input(type="imudp" port="514")
# Log all kernel messages to the console.
# Logging much else clutters up the screen.
#kern.* action(type="omfile" file="/dev/console")
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none action(type="omfile" file="/var/log/messages")
# The authpriv file has restricted access.
authpriv.* action(type="omfile" file="/var/log/secure")
# Log all the mail messages in one place.
mail.* action(type="omfile" file="/var/log/maillog")
# Log cron stuff
cron.* action(type="omfile" file="/var/log/cron")
# Everybody gets emergency messages
*.emerg action(type="omusrmsg" users="*")
# Save news errors of level crit and higher in a special file.
uucp,news.crit action(type="omfile" file="/var/log/spooler")
# Save boot messages also to boot.log
local7.* action(type="omfile" file="/var/log/boot.log")
# log every host in its own directory
if $fromhost-ip then /var/log/$fromhost-ip/messages
# Include all .conf files in /etc/rsyslog.d
$IncludeConfig /etc/rsyslog.d/*.conf
$template GRAYLOGRFC5424,"<%PRI%>%PROTOCOL-VERSION% %TIMESTAMP:::date-rfc3339% %HOSTNAME% %APP-NAME% %PROCID% %MSGID% %STRUCTURED-DATA% %msg%\n"
*.info;mail.none;authpriv.none;cron.none;*.* ##graylog:514;GRAYLOGRFC5424 # forward everything to remote server
As you're running within a java-application, you can even send you logs directly to syslog. Here's a small configuration example with log4j
log4j.rootLogger=INFO, SYSLOG
log4j.appender.SYSLOG=org.apache.log4j.net.SyslogAppender
log4j.appender.SYSLOG.syslogHost=myremote.elk-server.net
log4j.appender.SYSLOG.layout=org.apache.log4j.PatternLayout
log4j.appender.SYSLOG.layout.conversionPattern=%d{ISO8601} %-5p [%t] %c{2} %x - %m%n
log4j.appender.SYSLOG.Facility=LOCAL1
This server runs on Ubuntu 10.04, particularly on Linode VPS.
Passenger Error:
A source file that the application requires, is missing.
It is possible that you didn't upload your application files correctly. Please check whether all your application files are uploaded.
A required library may not installed. Please install all libraries that this application requires.
Further information about the error may have been written to the application's log file. Please check it in order to analyse the problem.
Error message:
no such file to load -- bundler
Exception class:
LoadError
Application root:
/srv/rails_app/current
I do have bundler installed, I know this because I did "bundle".
Here is my apache configs:
/etc/apache2/sites-enabled/000-default.conf:
<VirtualHost *:80>
PassengerRoot /usr/local/rvm/gems/ruby-1.9.2-p0/gems/passenger-2.2.15
PassengerRuby /usr/local/rvm/rubies/ruby-1.9.2-p0/bin/ruby
ServerName 173.230.152.41
DocumentRoot /srv/rails_app/current/public
<Directory "/srv/rails_app/current/public">
AllowOverride all
Options -MultiViews
</Directory>
</VirtualHost>
/etc/apache2/apache2.conf:
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
# with ServerRoot set to "" will be interpreted by the
# server as "//var/log/apache2/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/apache2"
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
##
## Server-Pool Size Regulation (MPM specific)
##
# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadLimit 64
ThreadsPerChild 25
MaxClients 150
MaxRequestsPerChild 0
</IfModule>
# event MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_event_module>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadLimit 64
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}
#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
Satisfy all
</Files>
#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf
# Include all the user configurations:
Include /etc/apache2/httpd.conf
# Include ports listing
Include /etc/apache2/ports.conf
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
#
# Define an access log for VirtualHosts that don't define their own logfile
CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
Include /etc/apache2/conf.d/
# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/
LoadModule passenger_module /usr/local/rvm/gems/ruby-1.9.2-p0/gems/passenger-2.2.15/ext/apache2/mod_passenger.so
So how do I go about getting this working?
You need to follow RVM's instructions for generating a passenger wrapper script to use on your PassengerRuby line. Without it, you won't have the proper environment variables set, and Apache won't be able to find the gems installed in that RVM install.
A follow up to #Chris's answer. If your on Ubuntu and using Apache do the following:
rvm install 1.9.2
rvm 1.9.2 --passenger
gem install passenger
rvmsudo passenger-install-apache2-module
Then in your apache.conf add/modify the following lines:
LoadModule passenger_module /usr/local/rvm/gems/ruby-1.9.2-p0/gems/passenger-2.2.15/ext/apache2/mod_passenger.so
PassengerRoot /usr/local/rvm/gems/ruby-1.9.2-p0/gems/passenger-2.2.15
PassengerRuby /usr/local/bin/passenger_ruby
This worked for me, after hours of trawling SO and the rest of the internet.
James
It should be noted that Passenger 3 supports RVM natively without special instructions. The Passenger instructions on the RVM website will become obsolete.